Waste remediation: Low-temperature synthesis of hybrid Cu(OH)2/CuO and CuO nanostructures from spent printed circuit boards and their dye degradation studies

The demand for environmentally friendly and sustainable resource utilization techniques for recycling waste printed circuit boards is significant due to their status as valuable secondary resources, containing high-purity copper and precious metals. In this context, Cu(OH)2/CuO and CuO nanostructures were fabricated using alkaline precipitation and low-temperature aging methods using the strip solution originated from laboratory-scale spent mobile phone printed circuit board recovery process. XRD, FTIR, FESEM-EDX, and TEM were utilized to characterize the as-recovered nanoproducts. A hybrid structure of Cu(OH)2/CuO was formed at 70°, and monoclinic CuO phase was formed at 80 °C aging time. The results show that Cu(OH)2/CuO nanoflakes have an average crystallite size of 24.06 nm and a particle width of 22 ± 3 nm. Cu(OH)2/CuO nanoflakes formed at 70 °C aging temperature and 24-h residence time have finer crystallite and particle sizes than CuO-ridged nanospheres formed at 80 °C aging temperature. The optical band gap energy of Cu(OH)2/CuO and CuO nanostructures formed was found to be 2.28 eV and 2.22 eV, respectively. The hybrid Cu(OH)2/CuO nanostructure photocatalyzed the decomposed 97.28% rhodamine blue using a visible light source, whereas the CuO nanostructure degraded only 14.64% rhodamine blue dye under similar conditions. A surfactant-less hybrid structure is developed without the use of any chemical precursor. Thus, a high value-added product is produced using one waste material to remove another waste in wastewater treatment.

Trimetallic Oxide Foam as an Efficient Catalyst for Fixation of CO2 into Oxazolidinone: An Experimental and Theoretical Approach

The excess anthropogenic CO₂ depletion via the catalytic approach to produce valuable chemicals is an industrially challenging, demanding, and encouraging strategy for CO₂ fixation. Herein, we demonstrate a selective one-pot strategy for CO₂ fixation into "oxazolidinone" by employing stable porous trimetallic oxide foam (PTOF) as a new catalyst. The PTOF catalyst was synthesized by a solution combustion method using transition metals Cu, Co, and Ni and systematically characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), N₂ sorption, temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS) analysis. Due to the distinctive synthesis method and unique combination of metal oxides and their percentage, the PTOF catalyst displayed highly interconnected porous channels along with uniformly distributed active sites on its surface. Well ahead, the PTOF catalyst was screened for the fixation of CO₂ into oxazolidinone. The screened and optimized reaction parameters revealed that the PTOF catalyst showed highly efficient and selective activity with 100% conversion of aniline along with 96% selectivity and yield toward the oxazolidinone product at mild and solvent-free reaction conditions. The superiority of the catalytic performance could be due to the presence of surface active sites and acid-base cooperative synergistic properties of the mixed metal oxides. A doubly synergistic plausible reaction mechanism was proposed for the oxazolidinone synthesis experimentally with the support of DFT calculations along with bond lengths, bond angles, and binding energies. In addition, stepwise intermediate formations with the free energy profile were also proposed. Also, the PTOF catalyst displayed good tolerance toward substituted aromatic amines and terminal epoxides for the fixation of CO₂ into oxazolidinones. Very interestingly, the PTOF catalyst could be significantly reused for up to 15 consecutive cycles with stable activity and retention in physicochemical properties.

The Ultrahigh Adsorption Capacity and Excellent Photocatalytic Degradation Activity of Mesoporous CuO with Novel Architecture

In this paper, mesoporous CuO with a novel architecture was synthesized through a conventional hydrothermal approach followed by a facile sintering procedure. HR-TEM analysis found that mesoporous CuO with an interconnected pore structure has exposed high-energy crystal planes of (002) and (200). Theoretical calculations indicated that the high-energy crystal planes have superior adsorption capacity for H⁺ ions, which is critical for the excellent adsorption and remarkable photocatalytic activity of the anionic dye. The adsorption capacity of CuO to methyl orange (MO) at 0.4 g/L was approximately 30% under adsorption equilibrium conditions. We propose a state-changing mechanism to analyze the synergy and mutual restraint relation among the catalyst CuO, H⁺ ions, dye and H₂O₂. According to this mechanism, the degradation rate of MO can be elevated 3.5 times only by regulating the MO ratio in three states.

Chitosan-Grafted Polyacrylic Acid-Doped Copper Oxide Nanoflakes Used as a Potential Dye Degrader and Antibacterial Agent: In Silico Molecular Docking Analysis

This study examined the catalytic and bactericidal properties of polymer-doped copper oxide (CuO). For this purpose, a facile co-precipitation method was used to synthesize CuO nanostructures doped with CS-g-PAA. Various concentrations (2, 4, and 6%) of dopants were systematically incorporated into a fixed amount of CuO. The prepared samples were analyzed by different optical, structural, and morphological characterizations. Field emission scanning electron microscopy and transmission electron microscopy micrographs indicated that doping transformed CuO's agglomerated rod-like surface morphology to form nanoflakes. UV-vis spectroscopy revealed that the optical spectra of the samples exhibit a redshift after doping, leading to a decrease in band gap energy from 3.3 to 2.5 eV. The purpose of the study was to test the catalytic activity of pristine and CS-g-PAA doped CuO for the degradation of methylene blue in acidic, basic, and neutral conditions using NaBH4 as a reducing agent in an aqueous medium. Furthermore, antibacterial activity was evaluated against Gram-positive and Gram-negative bacteria, namely, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Overall, enhanced bactericidal performance was observed upon doping CS-g-PAA into CuO, i.e., 4.25-6.15 and 4.40-8.15 mm against S. aureus and 1.35-4.20 and 2.25-5.25 mm against E. coli at the lowest and highest doses, respectively. The relevant catalytic and bactericidal action mechanisms of samples are also proposed in the study. Moreover, in silico molecular docking studies illustrated the role of these prepared nanomaterials as possible inhibitors of FabH and FabI enzymes of the fatty acid biosynthetic pathway.

Phosphate doping as a promising approach to improve reactivity of Nb2O5 in catalytic activation of hydrogen peroxide and removal of methylene blue via adsorption and oxidative degradation

This study is devoted to the evaluation of the influence of phosphate dopants on the reactivity of Nb₂O₅-based nanomaterials in the combined catalytic activation of H₂O₂ and the elimination of methylene blue (MB) from an aqueous solution via adsorption and chemical degradation. For this purpose, several niobia-based catalysts doped with various amounts of phosphate were prepared by a facile hydrothermal method and subsequent calcination. Phosphate doping was shown to strongly enhance the ability of Nb₂O₅ to activate H₂O₂, as well as to adsorb and degrade MB. The most pronounced differences in the reactivity of the parent Nb₂O₅ and phosphate-doped samples were observed under strongly acidic conditions (pH ~ 2.4), at which the most active modified catalysts (Nb/P molar ratio = 5/1) was approximately 6 times more efficient in the removal of MB. The observed enhancement of reactivity was attributed to the increased generation of singlet oxygen ¹O₂, which was identified as the main oxidizing agent responsible for efficient degradation of MB. To our knowledge, it is the first report revealing that phosphate doping of Nb₂O₅ resulted in an improved activity of niobia in the adsorption and degradation of organic pollutants.

Kinetic Study of the Removal of Methyl Orange Dye by Coupling WO3/H2O2

In the present work, the heterogeneous Fenton-like process was employed to investigate the kinetic models of the degradation of methyl orange (MO) using tungsten oxide/hydrogen peroxide couple. Tungsten oxide particles were successfully synthesized by reflux without surfactant and characterized by using XRD, SEM, TEM, and FT-IR techniques. The influence of parameters such as temperature and concentration of MO was studied and pseudo first-order and second-order models were applied. WO3/H2O2 showed high efficiency in the removal of methyl orange and attained more than 92.8% in 180 min. The first-order kinetic model was described by the removal process with the correlation coefficient of R2 = 0.99.

Green Synthesis of Nano-Zero-Valent Iron Using Ricinus Communis Seeds Extract: Characterization and Application in the Treatment of Methylene Blue-Polluted Water

In this study, the removal of methylene blue dye (MB) from aqueous solution was examined using a novel green adsorbent to overcome the obstacles encountered in chemical methods. Ricinus communis (RC) aqueous seeds extract was herein used as a reducing and capping agent to synthesize a novel nano-zero-valent iron (RC-nZVI) for the adsorption of harmful MB. Structural and morphological characterization of the synthesized RC-nZVI were performed using several techniques, e.g., steady-state absorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and zeta potential. The maximum efficiency of the removal was 96.8% at pH 6 and 25 °C. According to the kinetics study results, the adsorption process obeys the pseudo-first-order model. The experimental equilibrium data were fitted to the Freundlich isotherm model, the maximum adsorption capacity reached was 61.37 mg·g-1, and the equilibrium parameters were determined. The synthesized RC-nZVI possesses good reusability and can be considered as a potential economic and environmentally friendly adsorbent.

Synthesis of cetyl trimethyl ammonium bromide (CTAB) capped copper oxide nanocubes for the remediation of organic pollutants using photocatalysis and catalysis

The aim of this report is to synthesize copper oxide nanocubes (CuO NCs) at room temperature, using sodium borohydride as a reducing agent, and Cetyl Trimethyl Ammonium Bromide (CTAB) as a stabilizing agent. The crystallinity and morphology of the synthesized CuO NCs are investigated via X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The optical properties were analyzed by means of UV-visible absorbance and Raman spectroscopy. The existence of specific functional groups and structural stability were established via FTIR spectroscopy and thermogravimetric analysis (TGA). Furthermore, the catalytic efficiency of the as-prepared CuO NCs was tested using catalytic and photocatalytic studies of para-nitrophenol (p-NP) reduction and methylene blue (MB) degradation, respectively. The catalytic results demonstrated the nanocubes' excellent catalytic and photocatalytic responses with respect to the abatement of p-NP and MB within 50 s and 240 min, with kinetic rate constants of 3.9 × 10^-2 s^-1 and 6.47 × 10^-3 min^-1, respectively.

Oxygen reduction reaction electrocatalysis inducing Fenton-like processes with enhanced electrocatalytic performance based on mesoporous ZnO/CuO cathodes: Treatment of organic wastewater and catalytic principle

To treat typical organic wastewater efficiently, a novel Fenton-like processes based on ZnO/CuO composite cathode induced by oxygen reduction reaction (ORR) electrocatalysis with enhanced electrocatalytic performance was established successfully. Electrochemical testing investigation indicated that the ZnO/CuO cathode possessed conspicuous redox peak and better conductivity than uncompounded electrodes. Additionally, the removal efficiency of methylene blue and its chemical oxygen demand (COD) reached 96.4% and 70.8% after 120 min, respectively. Next, the feasibility of the material in practical application was also discussed. Subsequently, electrocatalytic principle based on valence state changes of metal elements on the electrode surface were also studied by x-ray photoelectron spectroscopy (XPS). Redox reactions between the active species H₂O₂ and the species Cu⁺ promoting Fenton-like processes were deduced. Namely, the conversion of Cu(I) and Cu(II) on the electrode surface was accompanied by OH generation. The combination of ZnO and CuO improved the surface morphology, increasing the active site of ORR and the yield of H₂O₂, thus greatly enhanced the Fenton-like activity. Finally, the main intermediates were identified by Gas chromatography-mass spectrometer (GC-MS), and possible pathways for dye degradation were proposed. In short, the research of ZnO/CuO cathode provided great significance for heterogeneous Fenton-like degradation and also showed its application potential in water treatment and remediation.

Decorated Au NPs on agar modified Fe3O4 NPs: Investigation of its catalytic performance in the degradation of methylene orange, and anti-human breast carcinoma properties

This work describes an eco-friendly approach for in situ immobilization of Au nanoparticles on the surface of Fe₃O₄ nanoparticles, with help of Agar and ultrasound irradiations, without using any toxic reducing and capping agents. The structure, morphology, and physicochemical properties were characterized by various analytical techniques such as Fourier transformed infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), inductively coupled plasma (ICP) and vibrating sample magnetometer (VSM). The desired catalyst showed great efficiency in the reductive degradation of methylene orange (MO) dye over NaBH₄ at room temperature. The MO was fully reduced in only 70 s and achieved rate constant of 9.6 × 10^-2 s^-1. The catalyst was reused for 10 runs without significant loss in catalytic activity. Cell viability of Fe₃O₄/agar/Au NPs was very low against breast adenocarcinoma (MCF7), breast carcinoma (Hs 578Bst), infiltrating ductal cell carcinoma (Hs 319.T), and metastatic carcinoma (MDA-MB-453) cell lines without any cytotoxicity on the normal cell line. According to the above findings, the Fe₃O₄/agar/Au NPs may be administrated for the treatment of several types of human breast carcinoma in humans.

Bio-assisted synthesized Pd nanoparticles supported on ionic liquid decorated magnetic halloysite: an efficient catalyst for degradation of dyes

Using natural materials, i.e. halloysite nanoclay that is a biocompatible naturally occurring clay and Heracleum persicum extract that can serve as a green reducing agent, a novel magnetic catalyst, Fe₃O₄/Hal-Mel-TEA(IL)-Pd, has been designed and fabricated. To prepare the catalyst, halloysite was first magnetized (magnetic particles with mean diameter of 13.06 ± 3.1 nm) and then surface functionalized with melamine, 1,4 dibromobutane and triethanolamine to provide ionic liquid on the halloysite surface (5 wt%). The latter was then used as a support to immobilize Pd nanoparticles that were reduced by Heracleum persicum extract. The characterization of the catalyst established that the loading of Pd in Fe₃O₄/Hal-Mel-TEA(IL)-Pd was very low (0.93 wt%) and its specific surface area was 63 m²g⁻¹. Moreover, the catalyst showed magnetic property (Ms = 19.75 emu g⁻¹) and could be magnetically separated from the reaction. The catalytic performance of the magnetic catalyst for reductive degradation of methyl orange and rhodamine B in the presence of NaBH₄ in aqueous media was investigated. The activation energy, enthalpy, and entropy for the reduction of methyl orange were estimated as 42.02 kJ mol⁻¹, 39.40 kJ mol⁻¹, and −139.06 J mol⁻¹ K⁻¹, respectively. These values for rhodamine B were calculated as 39.97 kJ mol⁻¹, 34.33 kJ mol⁻¹, and −155.18 Jmol⁻¹K⁻¹, respectively. Notably, Fe₃O₄/Hal-Mel-TEA(IL)-Pd could be reused for eight reaction runs with negligible loss of the catalytic activity (~3%) and Pd leaching (0.01 wt% of the initial loading).

Biosynthesis of Flower-Shaped CuO Nanostructures and Their Photocatalytic and Antibacterial Activities

Copper oxide nanoflowers (CuO-NFs) have been synthesized through a novel green route using Tulsi leaves-extracted eugenol (4-allyl-2-methoxyphenol) as reducing agent. Characterizations results reveal the growth of crystalline single-phase CuO-NFs with monoclinic structure. The prepared CuO-NFs can effectively degrade methylene blue with 90% efficiency. They also show strong barrier against E. coli (27 ± 2 mm) at the concentration of 100 µg mL-1, while at the concentration of 25 µg mL-1 weak barrier has been found against all examined bacterial organisms. The results provide important evidence that CuO-NFs have sustainable performance in methylene blue degradation as well as bacterial organisms.

Photocatalytic 4-nitrophenol degradation and oxygen evolution reaction in CuO/g-C3N4 composites prepared by deep eutectic solvent-assisted chlorine doping

Heterostructured Cl-CuO/g-C₃N₄ composite for OER and photocatalytic 4-nitrophenol degradation.

A facile coordination precipitation route to prepare porous CuO microspheres with excellent photo-Fenton catalytic activity and electrochemical performance

Porous CuO microspheres were prepared via a coordination precipitation route and exhibited superior photocatalytic activity and electrochemical performance.

Highly Efficient, Low-Cost, and Magnetically Recoverable FePt⁻Ag Nanocatalysts: Towards Green Reduction of Organic Dyes

Nowadays, synthetic organic dyes and pigments discharged from numerous industries are causing unprecedentedly severe water environmental pollution, and conventional water treatment processes are hindered due to the corresponding sophisticated aromatic structures, hydrophilic nature, and high stability against light, temperature, etc. Herein, we report an efficient fabrication strategy to develop a new type of highly efficient, low-cost, and magnetically recoverable nanocatalyst, i.e., FePt⁻Ag nanocomposites, for the reduction of methyl orange (MO) and rhodamine B (RhB), by a facile seed deposition process. X-ray diffraction results elaborate that the as-synthesized FePt⁻Ag nanocomposites are pure disordered face-centered cubic phase. Transmission electron microscopy studies demonstrate that the amount of Ag seeds deposited onto the surfaces of FePt nanocrystals increases when increasing the additive amount of silver colloids. The linear correlation of the MO and RhB concentration versus reaction time catalyzed by FePt⁻Ag nanocatalysts is in line with pseudo-first-order kinetics. The reduction rate constants of MO and RhB increase with the increase of the amount of Ag seeds. FePt⁻Ag nanocomposites show good separation ability and reusability, and could be repeatedly applied for nearly complete reduction of MO and RhB for at least six successive cycles. Such cost-effective and recyclable nanocatalysts provide a new material family for use in environmental protection applications.