From nano to the macro: tuning hierarchical aggregation of thermoresponsive PEG/PCL-based polyurethanes via molar mass/composition control

Amphiphilic hyperbranched polyurethanes (HPUs) based on PEG and PCL are promising for several biomedical applications. However, the lack of control over the molar mass and composition hinders a deep understanding of the aqueous self-assembly of HPUs. In this paper, the control over the HPU molar mass and composition was provided by dynamic urea bond-mediated polymerization (DUBMP), enabling a careful evaluation of their aqueous self-assembly by 1H NMR, DLS, and Cryo-TEM. HPUs containing a single PCL block per chain self-assemble into nanoaggregates (Rh ≈ 10 nm) in water up to its cloud-point temperature (Tcp) of 34 °C. On the other hand, HPUs with more than one PCL block per chain self-assemble into nanoaggregates and their clusters below Tcp. In this case, the solution behavior can be tuned by the HPU molar mass. Increasing $$\overline{{\mathrm{M} }_{\mathrm{w}}}$$ M w ¯ from 4 to 19 kDa, HPUs of similar composition can form colloidally stable cluster suspensions ($$\overline{{\mathrm{M} }_{\mathrm{w}}}$$ M w ¯ = 4 kDa) and phase separate into a denser liquid aggregate–cluster phase ($$\overline{{\mathrm{M} }_{\mathrm{w}}}$$ M w ¯ = 7 kDa) or into a highly viscous aggregate-network phase ($$\overline{{\mathrm{M} }_{\mathrm{w}}}$$ M w ¯ = 19 kDa). This type of control over the hierarchical aggregation of HPUs was reported for the first time and is interesting for biomedical applications.

Graphical abstract

Development and Preliminary Characterization of Polyester-Urethane Microparticles Used in Curcumin Drug Delivery System for Oropharyngeal Cancer

Background and Objectives: Curcumin (Cc) as an active substance is known for its anti-inflammatory, anticoagulant, antioxidant, and anti-carcinogenic effects, together with its role in cholesterol regulation, and its use in different gastrointestinal derangements. On the other hand, curcumin can be used for its properties as an inactive substance, with Cc particles being more often tested in pharmaceutical formulations for drug delivery, with promising safety records and kinetics. The aim of this research was to obtain and characterize polyurethane microparticles that can be used as a carrier with a controlled Cc release. Materials and Methods: The in vitro samples were characterized by the Zetasizer procedure, and UV-Vis spectroscopy, while the in-vivo measurements on human subjects were performed by non-invasive skin assays (trans-epidermal water loss, erythema, and skin hydration). A total of 16 patients with oropharyngeal cancer stages II and III in equal proportions were recruited for participation. Results: The experimental values of sample characteristics using the Zetasizer identified a mean structural size of 215 nm in the polyester-urethane preparate (PU), compared to 271 nm in the curcumin-based PU. Although the size was statistically significantly different, the IPDI and Zeta potential did not differ significantly (22.91 mV vs. 23.74 mV). The average age during the study period was 57.6 years for patients in the PU group, respectively, and 55.1 years in those who received the curcumin preparations. The majority of oropharyngeal cancers were of HPV-related etiology. There were no significant side effects; 75.0% of patients in the PU group reporting no side effects, compared to 87.5% in the Cc group. The 48 h TEWL measurement at the end of the experiment found a statistically significant difference between the PU and the Cc group (2.2 g/h/m² vs. 2.6 g/h/m²). The erythema assessment showed a starting measurement point for both research groups with a 5.1-unit difference. After 48 h, the difference between PU and PU_Cc was just 1.7 units (p-value = 0.576). The overall difference compared to the reference group with sodium lauryl sulfate (SLS) was statistically significant at a 95% significance level. Conclusions: Our findings indicate the obtaining of almost homogeneous particles with a medium tendency to form agglomerations, with a good capacity of encapsulation (around 60%), a medium release rate, and a non-irritative potential. Therefore, this polyester-urethane with Cc microparticles can be tested in other clinical evaluations.

PVA/κ-carrageenan/Au/camptothecin/pegylated-polyurethane/paclitaxel nanofibers against lung cancer treatment

Gold nanoparticles, paclitaxel (PTX), and camptothecin (CMPT) were loaded into the PVA/κ-carrageenan/pegylated-PU composite and core–shell nanofibers prepared by two-nozzle and coaxial electrospinning methods. The capability of composite and core–shell nanofibers was investigated for the targeted delivery of anticancer drugs in lung cancer treatment. In vitro and in vivo release of PTX and CMPT were investigated to find the release mechanism from nanofibers compared to direct administration of pristine PTX and CMPT. The mean fiber diameter for composite and core–shell nanofibers with shell feeding rates of 0.3, 0.5, and 0.7 mL h⁻¹ was about 225, 330, 520, and 640 nm, respectively. In vivo release studies indicated that the blood concentration of CMPT and PTX for rats fed with core–shell nanofibers reached the highest values of 26.8 ± 0.04 μg mL⁻¹, and 26.5 ± 0.05 μg mL⁻¹ in 36 h, and 24 h and reduced slowly within 84 h, and 48 h, respectively. The maximum cytotoxicity was 75% in the presence PVA/κ-carrageenan/CMPT/Au/pegylated-PU/PTX core–shell nanofibers. In vivo antitumor activity results confirmed the synergic effect of Au, CMPT and PTX anticancer drugs on the reduction of tumor volume without change in mouse weight by the PVA/κ-carrageenan/CMPT/Au/pegylated PU/PTX core–shell nanofibers. The obtained results indicated that the simultaneous loading of CMPT and PTX anticancer drugs and Au nanoparticles is more beneficial for lung cancer treatment.

Core–shell nanofibers and in vivo release from core–shell nanofibers against lung cancer.

PH Responsive Polyurethane for the Advancement of Biomedical and Drug Delivery

Due to the specific physiological pH throughout the human body, pH-responsive polymers have been considered for aiding drug delivery systems. Depending on the surrounding pH conditions, the polymers can undergo swelling or contraction behaviors, and a degradation mechanism can release incorporated substances. Additionally, polyurethane, a highly versatile polymer, has been reported for its biocompatibility properties, in which it demonstrates good biological response and sustainability in biomedical applications. In this review, we focus on summarizing the applications of pH-responsive polyurethane in the biomedical and drug delivery fields in recent years. In recent studies, there have been great developments in pH-responsive polyurethanes used as controlled drug delivery systems for oral administration, intravaginal administration, and targeted drug delivery systems for chemotherapy treatment. Other applications such as surface biomaterials, sensors, and optical imaging probes are also discussed in this review.

Polymeric Drug Delivery System Based on Pluronics for Cancer Treatment

Pluronic polymers (pluronics) are a unique class of synthetic triblock copolymers containing hydrophobic polypropylene oxide (PPO) and hydrophilic polyethylene oxide (PEO) arranged in the PEO-PPO-PEO manner. Due to their excellent biocompatibility and amphiphilic properties, pluronics are an ideal and promising biological material, which is widely used in drug delivery, disease diagnosis, and treatment, among other applications. Through self-assembly or in combination with other materials, pluronics can form nano carriers with different morphologies, representing a kind of multifunctional pharmaceutical excipients. In recent years, the utilization of pluronic-based multi-functional drug carriers in tumor treatment has become widespread, and various responsive drug carriers are designed according to the characteristics of the tumor microenvironment, resulting in major progress in tumor therapy. This review introduces the specific role of pluronic-based polymer drug delivery systems in tumor therapy, focusing on their physical and chemical properties as well as the design aspects of pluronic polymers. Finally, using newer literature reports, this review provides insights into the future potential and challenges posed by different pluronic-based polymer drug delivery systems in tumor therapy.

Deep Drug Penetration of Nanodrug Aggregates at Tumor Tissues by Fast Extracellular Drug Release

Herein, a new nanodrug of azobenzene-functionalized interfacial cross-linked reverse micelles (AICRM) with 5-fluorouracil loading (5-FU@AICRM) is reported. Upon irradiation with 530 nm light in water, the surface azobenzenes of the nanoparticles change from polar cis-conformation to nonpolar trans-conformation, resulting in the aggregation of 5-FU@AICRM within minutes. Simultaneously, the conformation change unlocks hydrophilic 5-FU with a strong water immigration propensity, allowing them to spray out from the AICRM quickly. This fast release ensures a thorough release of the drug, before the aggregates are internalized by adjacent cells, making it possible to achieve deep tissue penetration. A study of in vivo anticancer activity in A549 tumor-bearing nude mice shows that the tumor inhibition rate (TIR) of 5-FU@AICRM is up to ≈86.2%, 31.6% higher than that of group without green light irradiation and 20.7% higher than that of carmofur (CF, a hydrophobic analog of 5-FU)-loaded AICRM (CF@AICRM), in which CF is released slowly under light irradiation because of its hydrophobicity. Fast drug release upon nanodrug aggregation provides a good solution for balancing the contradiction of "aggregation and penetration" in tumor treatment with nanodrugs.

Stimuli-Responsive Micelles with Detachable Poly(2-ethyl-2-oxazoline) Shell Based on Amphiphilic Polyurethane for Improved Intracellular Delivery of Doxorubicin

Polyurethanes (PUs) have various biomedical applications including controlled drug delivery. However, the incompletely release of drug at tumor sites limits the efficiency of these drug loaded polyurethane micelles. Here we report a novel polymer poly(2-ethyl-2-oxazoline)-SS-polyurethane-SS-poly(2-ethyl-2-oxazoline) triblock polyurethane (PEtOz-PU(PTMCSS)-PEtOz). The hydrophilic pH-responsive poly(2-ethyl-2-oxazoline) was used as an end-block to introduce pH responsiveness, and the hydrophobic PU middle-block was easily synthesized by the reaction of poly (trimethylene carbonate) diol containing disulfide bonds (PTMC-SS-PTMC diol) and bis (2-isocyanatoethyl) disulfide (CDI). PEtOz-PU(PTMCSS)-PEtOz could self-assemble to form micelles (176 nm). The drug release profile of PEtOz-PU(PTMCSS)-PEtOz micelles loaded with Doxorubicin (DOX) was studied in the presence of acetate buffer (10 mM, pH 5.0) and 10 mM dithiothreitol (DTT). The results showed that under this environment, DOX-loaded polyurethane micelles could release DOX faster and more thoroughly, about 97% of the DOX was released from the DOX-loaded PEtOz-PU(PTMCSS)-PEtOz micelle. In addition, fluorescent microscopy and cell viability assays validated that the DOX-loaded polyurethane micelle strongly inhibits the growth of C6 cells, suggesting their potential as a new nanomedicine against cancer.

pH and reduction dual-responsive micelles based on novel polyurethanes with detachable poly(2-ethyl-2-oxazoline) shell for controlled release of doxorubicin

We describe a biodegradable amphiphilic polyurethane (PU) with disulfide bonds in the main chain [PEtOz-b-PU(SS)-b-PEtOz]. This multi-block PU was synthesized using poly (ε-caprolactone) diol (PCL-SS-PCL) and poly (2-ethyl-2-oxazoline) (PEtOz-OH) as soft segments, and bis (2-isocyanatoethyl) disulfide as the hard segment. Acid-sensitive PEtOz-OH was used as a hydrophilic segment for pH sensitivity. And reduction sensitivity was induced via disulfide bonds incorporated into the hydrophobic poly (ε-caprolactone) segment of the amphiphilic PUs. The system can self-assemble to form micelles responsive to pH and reducing conditions. The properties of the micelle were studied with dynamic light scattering and scanning electron microscopy. Doxorubicin (DOX) was chosen as a model drug. The in vitro release studies showed that PEtOz-b-PU(SS)-b-PEtOz micelle could degrade more rapidly and completely in a reductive and acidic environment [10 mM dl-Dithiothreitol, pH 5.0]. The methyl tetrazolium (MTT) assay and fluorescent microscopy confirmed the cytotoxicity of the DOX-loaded micelles. This work provides a promising dual-responsive drug carrier based on amphiphilic PU to achieve efficient drug delivery.

Silver nanoparticles with pH induced surface charge switchable properties for antibacterial and antibiofilm applications

Silver nanoparticles with pH induced surface charge transform activities were prepared which showed an enhanced antibacterial and antibiofilm efficiency while demonstrated reduced cytotoxicity to mammalian cells.

Functional polyurethane nanomicelle with pH-responsive drug delivery property

A new functional pH-responsive polyurethane-based nanomicelle has been developed with BES-Na as the functional monomer, the buffering agent with tertiary amine, and sulfonic acid group was incorporated into the hydrophilic shell as the functional agent, which resulted in polyurethane nanosystem with pH-sensitive property. Folic acid (FA) was chosen as model hydrophobic drug to evaluate the loading and pH-triggered release of the PU micelles in vitro drug loading and release. The drug loading content (LC) and the encapsulation efficiency (EE) for FA-loaded micelles in phosphate-buffered solutions were 7.68% and 27.72%, respectively, and the largest accumulative drug release percentages in pH 6.8 and pH 5.0 were 79.17% and 89.83% in 24 h, respectively. A facile and versatile approach has been provided for the design and fabrication of smart nanovehicles for effective drug delivery and opens a new thought in the design and fabrication of biodegradable polyurethanes for next generation of nanomicellar systems.

Morphology-dependent pH-responsive release of hydrophilic payloads using biodegradable nanocarriers

The development of functional nanocarriers with stimuli-responsive properties has advanced tremendously to serve biomedical applications such as drug delivery and regenerative medicine. However, the development of biodegradable nanocarriers that can be loaded with hydrophilic compounds and ensure its controlled release in response to changes in the surrounding environment still remains very challenging. Herein, we achieved such demands via the preparation of aqueous core nanocapsules using a base-catalyzed interfacial reaction employing a diisocyanate monomer and functional monomers/polymers containing thiol and hydroxyl functionalities at the droplet interface. pH-responsive poly(thiourethane–urethane) nanocarriers with ester linkages were synthesized by incorporating polycaprolactone diol, which is susceptible to hydrolytic degradation via ester linkages, as a functional monomer in the reaction formulation. We could demonstrate that by systematically varying the number of biodegradable segments, the morphology of the nanocarriers can be tuned without imparting the efficient encapsulation of hydrophilic payload (>85% encapsulation efficiency) and its transfer from organic to aqueous phase. The developed nanocarriers allow for a fast release of hydrophilic payload that depends on pH, the number of biodegradable segments and nanocarrier morphology. Succinctly put, this study provides important information to develop pH-responsive nanocarriers with tunable morphology, using interfacial reactions in the inverse miniemulsion process, by controlling the number of degradable segments to adjust the release profile depending on the type of application envisaged.

The morphology and release properties of aqueous core nanocapsules for the pH-responsive release of hydrophilic payload was investigated by systematically varying the number of biodegradable segments.

Reduction responsive and surface charge switchable polyurethane micelles with acid cleavable crosslinks for intracellular drug delivery

Previously we synthesized redox sensitive polyurethane micelles, core crosslinked by diisocyanates (PU-CCL).

Synthesis of polyurethanes with pendant azide groups attached on the soft segments and the surface modification with mPEG by click chemistry for antifouling applications

Polyurethane with pendant azide groups on the soft segment (PU-GAP) was prepared in this study to further increase the content of reactive azide groups and improve their surfaces enrichment for further functionalization. Polymer diols with pendant azide groups (GAP) were prepared by transforming the pendant chlorine groups at polyepichlorohydrin (PECH) into azide groups with sodium azide. The prepared PECH, GAP and PU-GAP was characterized by GPC, ¹H NMR and FTIR. Propargylic mPEG (mPEG-alkyne) was used as model surface modification reagents which was grafted on the prepared azido containing polyurethane films via click chemistry. The surface morphology, chemical composition and wettabilities were studied by SEM, XPS and water contact angle (WCA) analysis, respectively. SEM results demonstrated different surface topologies between mPEG modified PU surface and original PU surface. XPS and WCA analysis proved the successful grafting of mPEG on the pendant azide groups of PUs. The mPEG modified PU surfaces demonstrated good antifouling activities against model bacteria and mPEG with larger molecular weights modified surfaces showed better resistance efficiency to attachment of bacteria. Therefore, the surface reactive polyurethane we prepared can be a universal platform for further functionalization according actual applications.

Polyurethane with pendant azide groups on the soft segment which can be an universal platform for further functionalization according actual applications.

Biodegradable polyurethane micelles with pH and reduction responsive properties for intracellular drug delivery

Polyurethane micelles with disulfide linkage located at the interface of hydrophilic shell and hydrophobic core (PU-SS-I) have been shown enhanced drug release profiles. However, the payloads could not be released completely. The occurrence of aggregation of hydrophobic cores upon shedding hydrophilic PEG coronas was considered as the reason for the incomplete release. To verify the above hypothesis and to develop a new polyurethane based micelles with dual stimuli respond properties and controllable location of pH and reduction responsive groups in the PU main chains, a tertiary amine was incorporated into the hydrophobic core PU-SS-I, which resulted polyurethane with both reduction and pH sensitive properties (PU-SS-N). Biodegradable polyurethane with only disulfide linkages located between the hydrophilic PEG segment and the hydrophobic PCL segments (PU-SS-I) and polyurethane with only pH sensitive tertiary amine at the hydrophobic core (PU-N-C) were used as comparisons. Paclitaxel (PTX) was chosen as mode hydrophobic drug to evaluate the loading and redox triggered release profiles of the PU micelles. It was demonstrated that PU-SS-N micelles disassembled instantly at the presence of 10mM GSH and at an acidic environment (pH=5.5), which resulted the nearly complete release (~90%) of the payloads within 48h, while about ~70% PTX was released from PU-SS-I and PU-SS-N micelles at neutral environment (pH=7.4) with the presence of 10mM GSH. The rapid and complete redox and pH stimuli release properties of the PU-SS-N nanocarrier will be a promising anticancer drug delivery system to ensure sufficient drug concentration to kill the cancer cells and to prevent the emergency of MDR. The in vitro cytotoxicity and cell uptake of the PTX-loaded micelles was also assessed in H460 and HepG2 cells.

Marrying multicomponent reactions and aggregation-induced emission (AIE): new directions for fluorescent nanoprobes

Recent development and progress for fabrication and applications of aggregation-induced emission polymers through multicomponent reactions have been summarized in this review.

Precise control of drug loading and release of an NSAID–polymer conjugate for long term osteoarthritis intra-articular drug delivery

The synthesis of biocompatible polymer diclofenac conjugates (PDCs) that have a high drug loading and high degree of control over diclofenac (DCF) release is described.

Surface charge switchable and core cross-linked polyurethane micelles as a reduction-triggered drug delivery system for cancer therapy

The core cross-linked polyurethane micelles with redox sensitive and pH-responsive surface charge switchable properties were prepared by using diisocyanates as crosslinkers and studied as anticancer drug carriers.