A Review on the Morphology and Material Properties of the Gas Separation Membrane: Molecular Simulation

Gas membrane separation technology is widely applied in different industry processes because of its advantages relating to separation performance and economic efficiency. It is usually difficult and time consuming to determine the suitable membrane materials for specific industrial separation processes through traditional experimental research methods. Molecular simulation is widely used to investigate the microscopic morphology and macroscopic properties of materials, and it guides the improvement of membrane materials. This paper comprehensively reviews the molecular-level exploration of the dominant mechanism and influencing factors of gas membrane-based separation. The thermodynamics and kinetics of polymer membrane synthesis, the molecular interactions among the penetrated gases, the relationships between the membrane properties and the transport characteristics of different gases in the composite membrane are summarized and discussed. The limitations and perspectives of the molecular simulation method in the study of the gas membrane separation process are also presented to rationalize its potential and innovative applications. This review provides a more comprehensive reference for promoting the materials' design and engineering application of the gas separation membrane.

Molecular Dynamics Simulation of the Interfacial Shear Properties between Thermoplastic Polyurethane and Functionalized Graphene Sheet

In this study, the effect of the type and content of functional groups on the interfacial shear properties of a functionalized graphene sheet (FGS)/thermoplastic polyurethane (TPU) nanocomposite are investigated by molecular dynamics (MD) simulations. The maximum pull-out force and separation energy were used to characterize the interfacial strength of the FGS/TPU nanocomposite in sliding mode. To find out how the type and content of functional groups affect the interfacial shear properties of the TPU/FGS system from an atomic view, the details of interactions between FGS and TPU were characterized. Based on the results, stronger interfacial shear properties of the TPU/FGS system can be achieved by adding the carboxyl group or hydroxyl group on the surface of graphene than that between TPU and FGS modified by the amine group or epoxy group, because of the strong interaction of electrostatic forces and H-bonds. In addition, interfacial shear properties can also be enhanced by increasing the content of functional groups modified on the surface of graphene.

Effect of Electrostatic Interactions on the Interfacial Energy between Thermoplastic Polymers and Graphene Oxide: A Molecular Dynamics Study

In this study, the atomistic-scale mechanisms affecting the interfacial stability of a thermoplastic polymer/graphene oxide interface are investigated using molecular dynamics simulations. Different combinations of thermoplastic polymers (polyethersulfone (PES) and polyetherimide (PEI)) and graphene oxides modified with –O–, –OH, and –COOH are prepared. PES is found to be more strongly stabilized with modified/functionalized graphene oxide in the order of –COOH, –OH, –O–, which is opposite to the stability order of PEI. Our results suggest that these orders of stability are governed by a balance between the following two factors resulting from electrostatic interactions: (1) atoms with a strong charge bias attract each other, thereby stabilizing the interface; (2) the excluded-volume effect of the functional groups on graphene oxide destabilizes the interface by preventing π-π stacking of aromatic rings.

Molecular dynamics simulations of hyperbranched poly(ethylene imine)-graphene oxide nanocomposites as dye adsorbents for water purification

Atomistically detailed molecular dynamics simulations were employed to study the adsorption capacity of graphene-oxide-based (GO) aqueous systems for the methylene blue (MB) dye in the presence of branched poly(ethylene imine) (BPEI) polymers. The polymeric component was either freely mixed or chemically attached to GO. The main focus was the elucidation of the effects originating from the presence of BPEI molecules in the association of MB with the formed GO complexes. The effect of temperature was also examined. It was found that the presence of the cationic BPEI molecules results in the formation of a distinct microenvironment characterized by a polymer-mediated interconnected morphology which promotes the development of larger-sized MB clusters. These clusters were found to form in the vicinity of the GO flakes, increasing thus the adsorption capacity of the dye molecules in the polymer-containing systems. Particularly in the system with the BPEI-functionalized GO flakes, a persistent percolated structure is formed, which results in a more restricted diffusion of the MB molecules, increasing thus significantly their residence time close to the GO surface. The clustering behavior of MB was found to be temperature-dependent in the BPEI-based models, providing useful information regarding the conditions for optimal adsorption performance of such membranes, in nanofiltration processes.

Elimination of Uremic Toxins by Functionalized Graphene-Based Composite Beads for Direct Hemoperfusion

Conventional absorbents for hemoperfusions suffer from low efficiency and slow absorption with numerous side effects. In this research, we developed cellulose acetate (CA) functionalized graphene oxide (GO) beads (∼1.5-2 mm) that can be used for direct hemoperfusion, aiming at the treatment of kidney dysfunction. The CA-functionalized GO bead facilitates adsorption of toxins with high biocompatibility and high-efficiency of hemoperfusion while maintaining high retention for red blood cell, white blood cells, and platelets. Our in vitro results show that the toxin concentration for creatinine reduced from 0.21 to 0.12 μM (p < 0.005), uric acid from 0.31 to 0.15 mM (p < 0.005), and bilirubin from 0.36 to 0.09 mM (p < 0.005), restoring to normal levels within 2 h. Our in vivo study on rats (Sprague-Dawley, n = 30) showed that the concentration for creatinine reduced from 83.23 to 54.87 μmol L^-1 (p < 0.0001) and uric acid from 93.4 to 54.14 μmol L^-1 (p < 0.0001), restoring to normal levels within 30 min. Results from molecular dynamics (MD) simulations using free-energy calculations reveal that the presence of CA on GO increases the surface area for adsorption and enhances penetration of toxins in the binding cavities because of the increased electrostatic and van der Waals force (vdW) interactions. These results provide critical insight to fabricate graphene-based beads for hemoperfusion and to have the potential for the treatment of blood-related disease.

Nanoscale toughening of ultrathin graphene oxide-polymer composites: mechanochemical insights into hydrogen-bonding/van der Waals interactions, polymer chain alignment, and steric parameters

This paper describes a systematic study on the nanoscale toughening of monolayer graphene oxide (GO) by an ultra-thin polymer adlayer, which impedes the propagation of cracks during intraplanar fracture. Using molecular dynamics simulations, the crack-bridging capabilities of a library of five hydrogen-bonding-capable polymers are explored against an epoxide-rich GO substrate. The best crack-bridging effect is found in polymers with functional groups that can both donate/accept hydrogen atoms and have better capability to form cooperative hydrogen bonds. Aligning the chains of poly(acrylic acid) orthogonally to the crack propagation direction significantly enhances the fracture toughness of monolayer GO (by 310%) in comparison to that for an adlayer with randomly arranged chains (180% enhancement). Notably, van der Waals interactions, which are seldom highlighted in the fabrication of strong GO-polymer interfaces, are found to also provide significant crack-bridging capabilities when the polymers possess large side groups. These results pave the way for a set of design criteria that can help in remediating the intrinsically brittle mechanical behavior of two-dimensional materials, a barrier that currently restricts their potential applications.

A microscopic view of graphene-oxide/poly(acrylic acid) physical hydrogels: effects of polymer charge and graphene oxide loading

In this work we have examined in detail by means of fully atomistic molecular dynamics simulations, physical hydrogels formed by a polymer electrolyte, poly(acrylic acid), and graphene oxide, at two different charging states of the polymer and two different graphene oxide concentrations. It was found that variations of these parameters incurred drastic changes in general morphological characteristics of the composite materials, the degree of physical adsorption of polyelectrolyte chains onto the graphene oxide surface, the polymer dynamic response at local and global length scales, in the charge distributions around the components, and in the mobility of the counterions. All these microscopic features are expected to significantly affect macroscopic physical properties of the hydrogels, such as their mechanical responses and their electrical behaviors.