Two novel fluorescent probes based on quinolinone for continuous recognition of Al3+ and ClO. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2023;300:122917. [PMID: 37269662 DOI: 10.1016/j.saa.2023.122917] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

On the basis of classical Schiff base reaction, two novel and efficient fluorescent probes (DQNS, DQNS1) were designed and synthesized by introducing Schiff base structure into dis-quinolinone unit for structural modification, which can be used to detect Al³⁺ and ClO^-. Because the power supply capacity of H is weaker than that of methoxy, DQNS shows better optical performance: a large Stokes Shift (132 nm), identify Al³⁺ and ClO^- with high sensitivity and selectivity, low detection limit (29.8 nM and 25 nM) and fast response time (10 min and 10 s). Through the working curve and NMR titration experiment, the recognition mechanism of Al³⁺ and ClO^- (PET and ICT) probes are confirmed. Meanwhile, it is speculated that the probe has continuity for the detection of Al³⁺ and ClO^-. Furthermore, DQNS detection of Al³⁺ and ClO^- was applied to real water samples and living cell imaging.

Schiff Base Compounds as Fluorescent Probes for the Highly Sensitive and Selective Detection of Al3+ Ions

Two new Schiff base fluorescent probes (L and S) were designed for selectively detecting Al3+ ions in aqueous medium. Structural characterization of the purely synthesized compounds was acquired by IR, 1H NMR and 13C NMR. Moreover, their photochromic and fluorescent behaviors have been investigated systematically by UV–Vis absorption and fluorescence spectra. The two probes have both high selectivity and sensitivity toward Al3+ ions in aqueous medium. The 2:1 stoichiometry between the Al3+ and probes was verified by Job’s plot. Moreover, the limits of detection (LOD) for Al3+ by L and S were 1.98 × 10−8 and 4.79 × 10−8 mol/L, respectively, which was much lower than most previously reported probes. The possible recognition mechanism was that the metal ions would complex with Schiff base probes because of the prevalence of the species optimal for complex formation, inhibiting the structural isomerization of conjugated double bonds (-C=N-), inhibiting the proton transfer process in the excited state of the molecules and resulting in changes of its color and fluorescence behavior. Furthermore, the probes will have potential applications for selectively, detecting Al3+ ions in the environmental system with high accuracy and providing a new strategy for the design and synthesis of multi-functional sensors.

Multiresponsive tetrarylethylene-based fluorescent dye with multicoloreded changes: AIEE properties, acidichromism, Al3+ recognition, and applications

A novel fluorescent sensor BTAE-PA containing two tetrarylethylene (TAE) units linked through pyrimidine-2-amine was prepared, and its optical properties were systematically studied. BTAE-PA exhibited a typical aggregation-induced emission enhancement behavior, and its fluorescent properties could be efficiently modulated by acid/base and metal ions in THF. The protonated effect could induce significant acidichromism and 'turn-on' near-infrared emission with a large Stokes shift (Δλ = 225 nm). Furthermore, BTAE-PA was highly selective toward Al³⁺ with significant absorption (yellow → orange) and fluorescence (green → red) changes. A Job's plot established the 1 : 1 stoichiometry of the complex formation between BTAE-PA and Al³⁺, and the limit of detection for Al³⁺ was determined to be 1.30 × 10^-7 mol L^-1. Finally, we also demonstrated that BTAE-PA could be made into test paper strips for 'naked-eye' detection of acid/Al³⁺, and fluorescence imaging experiments proved that BTAE-PA is capable of achieving cell imaging with good biocompatibility. Therefore, the multi-stimuli-responsive and multicoloured display performance of BTAE-PA endows the material with potential applications in security ink, acid/Al³⁺ sensing, and bio-imaging.

A dual fluorescence probe for Zn2+ and Al3+ through differentially response and bioimaging in living cells

A novel Schiff base fluorescent probe 7-Hydroxy-8-(((2-(hydroxymethyl)quinolin-8-yl)imino)methyl)-coumarin (XL) consist of formylcoumarin and aminoquinoline moieties was synthesized for dual detection of Zn²⁺ and Al³⁺ ions. Probe XL exhibited high selective and sensitive response towards Zn²⁺ and Al³⁺ ions through different color changes and significant fluorescence turn-on response (270 fold higher for Zn²⁺ and 230 fold higher for Al³⁺) in MeOH-H₂O (4/1, v/v) over other cations, with detection limits (LOD) as low as 3.75 × 10^-8 and 1.14 × 10^-8 M, respectively. Moreover, probe XL exhibited preferential selectivity for Al³⁺ through displacing Zn²⁺ from the XL-Zn²⁺ complex by ligand-to-ligand transfer process. The binding mechanism of intramolecular charge transfer (ICT) were proposed from fluorescence and UV-vis titrations, Job's plot, ¹H NMR titration, HRMS and DFT calculations. The probe was proven to be suitable for actual samples detection of Zn²⁺ and Al³⁺ ions. The complex XL-Zn²⁺ and XL-Al³⁺ exhibited dramatic fluorescent "turn-off" properties for PPi and PPi/F^- respectively through snatching metal ions and released free XL. Moreover, probe XL showed low biotoxicity and sequentially "off-on-off" fluorescent bio-imaging of Zn²⁺/Al³⁺ and PPi/F^- in PC12 cells.

A sensitive OFF–ON–OFF fluorescent probe for the cascade sensing of Al3+ and F− ions in aqueous media and living cells

A simple Schiff-base ligand 2-hydroxy-1-naphthaldehyde semicarbazone (HNS) was synthesized and characterized. Based on the combined effect of inhibition of CH Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> N isomerization and chelation-enhanced fluorescence (CHEF), HNS functions as a fluorescence “turn on” sensor for Al³⁺ in buffered aqueous media. Based on the strong affinity of Al³⁺ to F⁻ ions, the in situ generated Al³⁺–HNS complex can also be utilized as an effective chemosensor for F⁻ sensing by metal displacement approach, ensuing quenching of fluorescence by the reversible return of HNS from Al³⁺–HNS complex. Thus a method using a single probe for the detection of both Al³⁺ and F⁻ ions is developed. The system exhibits high selectivity and sensitivity for Al³⁺ and F⁻ ions and the detection limits were found to be as low as 6.75 × 10⁻⁸ M and 7.89 × 10⁻⁷ M, respectively. Furthermore, the practical applicability of this probe has been examined in living cells.

A simple Schiff-base ligand 2-hydroxy-1-naphthaldehyde semicarbazone (HNS) was synthesized and applied to the sequential sensing of Al³⁺ and F⁻ ions in aqueous media and live cells.

A novel colorimetric-fluorescent probe for Al3+ and the resultant complex for F- and its applications in cell imaging

A novel quinoline-based Schiff-base probe QL had been synthesized, which could sequentially monitor Al³⁺ and F^- in MeOH-H₂O solution (v/v = 8/1, 0.01 M, HEPES buffer, pH = 7.3). The probe QL expressed a high selective and sensitive "OFF-ON-OFF" fluorescent response for Al³⁺ and F^- (excitation at 460 nm and emission at 530 nm) accompanying visible color changed, which was ascribed to intramolecular charge transfer (ICT) process and chelation-enhanced fluorescence (CHEF) mechanism. The binding stoichiometry of QL with Al³⁺ was 2:1 counting on Job's plot and HRMS, while F^- could pull Al³⁺ to depart from the complexation 2QL-Al³⁺ and released free QL. The limit of detections of probe QL for Al³⁺ and F^- ions were calculated to be 0.10 μM and 0.50 μM. The ¹H NMR experiments and density functional theory (DFT) calculations were carried out to further prove the binding mode between QL and Al³⁺. Furthermore, fluorescence imaging studies demonstrated that the probe QL was low cytotoxicity and could be applied to detect Al³⁺ and F^- in living PC12cells.

A novel fluorescent-colorimetric probe for Al3+ and Zn2+ ion detection with different response and applications in F- detection and cell imaging

A novel Schiff base fluorescence probe (HL) was synthesized by the condensation of salicylaldehyde and an 8-aminoquinoline derivative. This probe acts as a "turn-on" dual selectivity fluorescence probe for Zn²⁺ and Al³⁺ ions, providing different colors and detection limits (DL) of 11.5 and 23.5 nM, respectively. Moreover, when Zn²⁺ and Al³⁺ co-exist, HL exhibits a preference for Al³⁺ by displacing Zn²⁺ from the HL-Zn²⁺ complex, realizing a dual-channel signal output for Al³⁺. The HL-Al³⁺ system could further discern F^- by a "turn-off" fluorescence response with a DL of 86.0 nM. Furthermore, the probe HL was capable of monitoring intracellular Al³⁺, Zn²⁺ and F^- in living PC12 cells in vitro through fluorescence imaging, which proved its value in potential in vivo applications.

Preparation and Analyses of the Multifunctional Properties of 2D and 3D MOFs Constructed from Copper(I) Halides and Hexamethylenetetramine

In this article, two two-dimensional and three-dimensional metal-organic frameworks are synthesized by the self-assembly of copper(I) halide and the hexamethylenetetramine (hmt) ligand. Compound 1 is a two-dimensional metal-organic framework composed of a pyramidal Cu₄I₅ cluster and hexamethylenetetramine, in which hmt-bridged Cu clusters form a two-dimensional (4,4)-connected net with a point symbol of (4⁴·6²) (4⁴·6²). Compound 2 is a homochiral three-dimensional metal-organic framework material generated through an unusual spontaneous crystallization from achiral precursors. The two compounds were characterized by a series of analyses such as infrared spectroscopy, elemental analysis, circular dichroism spectroscopy, and powder X-ray diffraction. Both of them exhibit unexpected stability under a wide range of conditions of acid and base. In addition, the fluorescence intensity changes regularly under acid-base conditions. Stokes shift shows a good linear relationship with -log [H⁺], which makes them become promising acid-base sensors. Compounds 1 and 2 also display selective adsorption and a significant degradation effect on the organic dye methylene blue. In addition, the fluorescence study indicated that compound 2 could be used as a sensor to detect Cr³⁺.

A novel coumarin-based fluorescent sensor for Ca2+ and sequential detection of F- and its live cell imaging

A novel fluorescent sensor CPM for relay detecting Ca²⁺ and F^- based on coumarin has conveniently synthesized and characterized. The sensor CPM showed highly fluorescence enhancement to Ca²⁺ over other metal ions, and the CPM-Ca²⁺ complex could selectively recognize F^- among other anions. The limits of detection for Ca²⁺ and F^- were 5.81 × 10^-7 M and 4.28 × 10^-7 M in aqueous solution (DMF/HEPES buffer 1:1 v/v, 10 mM, pH = 7.2), respectively. Their sensing mode had been testified by Job's plots, UV-vis titration, ¹H NMR titrations, ESI-mass, fluorescence and DFT calculations. The fluorescence imaging indicated that CPM was cell-permeable and could be used to effectively detect Ca²⁺ and F^- within living cells.

A new fluorescent-colorimetric chemosensor based on a Schiff base for detecting Cr3+, Cu2+, Fe3+ and Al3+ ions

A new Schiff base derivative fluorescence-colorimetric chemosensor 2-hydroxy-5-[(2-hydroxy-1-naphthyl)methylideneamino]benzoic acid (H₃L), has been designed and synthesized. H₃L displayed high selectivity and sensitivity for detecting Cr³⁺, Cu²⁺, Fe³⁺ and Al³⁺ ions in DMF/H₂O (v/v = 1/1) solution. When Cr³⁺, Cu²⁺ or Fe³⁺ ions were added, the solution of H₃L in DMF/H₂O exhibited different color changes. While with the addition of Fe³⁺ or Al³⁺ ions, the solution of H₃L in DMF/H₂O displayed different fluorescence responses. The bonding modes and bonding ratios of H₃L and metal ions were explored by the Job's plot, ¹H NMR titration, and electrospray ionization mass spectrometry (ESI-MS). The detection limits of H₃L with Cr³⁺, Cu²⁺, Fe³⁺and Al³⁺ ions were 3.37 × 10^-7 M, 4.65 × 10^-7 M, 3.58 × 10^-7 M and 4.89 × 10^-7 M, respectively.

Novel dual-functional fluorescent sensors based on bis(5,6-dimethylbenzimidazole) derivatives for distinguishing of Ag+ and Fe3+ in semi-aqueous medium

Three novel bisbenzimidazole derivatives have been synthesized and developed as dual-functional fluorescent sensors for the rapid and highly selective detection of Ag⁺ and Fe³⁺ ions in semi-aqueous medium with distinct spectral response for the first time. The absorption intensity is drastically decreased after the addition of Ag⁺. Contrarily, it is markedly increased upon the addition of Fe³⁺. And there is a good linear relation at low concentration of both Ag⁺ and Fe³⁺, which provides a quantitative method for their detection. Similarly, the sensors show a distinct fluorescence response towards Ag⁺ and Fe³⁺ with a different fluorescence color change under UV light. In addition, no significant changes and interference can be observed with other metal ions. The sensing mechanism studies confirm that the N atom in CN of benzimidazole ring of sensor 4a may bind with Ag⁺ or Fe³⁺ ion to form metal complex. And there is only a static quenching process for the 4-Ag⁺ complex system, but both dynamic and static quenching processes occur in the 4-Fe³⁺ complex system. Moreover, sensors 4 can steadily work in solution with a wide range of pH 4-13 and rapidly respond to Ag⁺ and Fe³⁺ with a response time of 10 s. Finally, the sensors have been successfully applied to the visual detection of Ag⁺ and Fe³⁺ not only in solution, but also in test paper.

A turn-on fluorescence sensor for the highly selective detection of Al3+ based on diarylethene and its application on test strips

A novel fluorescent sensor, 1O, based on photochromic diarylethene with a 2-hydroxybenzhydrazide unit was designed and synthesized and can be used to recognize Al³⁺ in methanol (2.0 × 10⁻⁵ mol L⁻¹).

Synthesis and fluorescence spectral studies of novel quinolylbenzothiazole-based sensors for selective detection of Fe3+ ion

Four novel fluorescence sensors bearing a quinolylbenzothiazole platform were synthesized and characterized. The sensors displayed excellent selectivity and highly sensitive fluorescence response to Fe3+ ion in H2O/DMSO buffer solution (1:4 volume ratio; Tris-HCl, 0.01 mol/L; pH = 7.40) at 500 nm originating from quinolylbenzothiazole fluorophore group. Other cations, namely Li+, Na+, K+, Mg2+, Ca2+, Co2+, Ni2+, Cd2+, Cu2+, Zn2+, Mn2+, Ba2+, Pb2+, Hg2+, Al3+, and Eu3+, showed no appreciable change in fluorescence spectrum. The binding stoichiometry between sensors L1, L2, L3, or L4 and Fe3+ was observed to be 1:1 based on fluorescence titration and Jobs plot analysis. The detection limits of L1, L2, L3, and L4 for Fe3+ were found to be 0.155, 0.362, 0.249, and 0.517 μmol/L, respectively. Furthermore, possible utilization of sensors to detect Fe3+ in living HeLa cells was also investigated by confocal fluorescence microscopy.

Acridine-based fluorescence chemosensors for selective sensing of Fe3+ and Ni2+ ions

Two novel acridine-based fluorescence chemosensors (L1 and L2) were prepared and their metal ions sensing properties were investigated. L1 (L2) exhibited an excellent selective fluorescence response toward Fe³⁺ (Ni²⁺) and the stoichiometry ratio of L1-Fe³⁺ and L2-Ni²⁺ were 1:1. The detection limits of L1 and L2 were calculated by the fluorescence titration to be 4.13μM and 1.52μM, respectively, which were below the maximum permissive level of Fe³⁺ and Ni²⁺ ions in drinking water set by the EPA. The possible mechanism of the fluorescence detection of Fe³⁺ and Ni²⁺ had been proposed according to the analysis of Job's plot, IR spectra and ESI-MS. The determination of Fe³⁺ and Ni²⁺ ions in living cells had been applied successfully.

Colorimetric chiral fluorescent sensors for Eu3+ and sequential enantioselective sensing of malate anion

Novel phenanthroline Schiff base fluorescent sensors L1, L2, and D1 were designed and synthesized. The sensing abilities of the compounds in the presence of metal cations (Li⁺ , Na⁺ , K⁺ , Ag⁺ , Mg²⁺ , Ba²⁺ , Ca²⁺ , Mn²⁺ , Pb²⁺ , Hg²⁺ , Ni²⁺ , Zn²⁺ , Cd²⁺ , Co²⁺ , Cu²⁺ , Cr³⁺ , Fe³⁺ , Fe²⁺ , Al³⁺ , and Eu³⁺ ) were studied by UV-vis and fluorescent spectroscopy. The compounds L1, L2, and D1 could act as Eu³⁺ ion turn-off fluorescent sensors based on ligand-to-metal binding mechanism in DMSO-H₂ O solution (v/v = 1:1, 10 mM Tris, pH = 7.4). Additionally, the L1-Eu³⁺ and D1-Eu³⁺ complexes could be applied as turn-on enantioselective sensors sensing of malate anion isomers with color changes. Furthermore, biological experiments using living PC-12 cells demonstrated that L1 and D1 had excellent membrane permeability and could be used as effective fluorescent sensors for detecting Eu³⁺ and malate anion in living cells.

A novel turn-on fluorescent probe for Al3+ and Fe3+ in aqueous solution and its imaging in living cells

A quinoline-based fluorescence probe has been prepared and characterized. Probe 1 showed a selective sensing ability for Al³⁺ and Fe³⁺ ions through fluorescence enhancement response at 515nm when it was excited at 360nm. In the presence of Fe³⁺ ion, probe 1 exhibited a detection limit of 2.10×10^-6M. As for Al³⁺, its detection limit of 3.58×10^-7M was significantly lower than the highest limit of Al³⁺ in drinking water recommended by the WHO (7.41μM), representing a rare example in reported fluorescent probe for Al³⁺ ion. The fluorescence microscopy experiments have demonstrated that probe 1 could be used in live cells for the detection of Al³⁺ and Fe³⁺ ions.

A quinoline-based Cu2+ ion complex fluorescence probe for selective detection of inorganic phosphate anion in aqueous solution and its application to living cells

A quinaldine functionalized probe QP has been designed and synthesized. It exhibited selective turn-off fluorescence response toward Cu²⁺ ion over most of the biologically important ions at physiological pH. The binding ratio of the probe QP and Cu²⁺ ion was determined to be 1:1 through fluorescence titration, Job's plot and ESI-MS. The binding constant (K) of Cu²⁺ to probe QP was found to be 2.12×10⁴M^-1. Further, the Cu²⁺ ensemble of probe QP was found to respond H₂PO₄^- and HPO₄^2- among other important biological anions via fluorescence turn-on response at physiological pH. Fluorescence microscopy imaging using living Hela cells showed that probe QP could be used as an effective fluorescent probe for detecting Cu²⁺ cation and H₂PO₄^- and HPO₄^2- anions in living cells.

Novel enantioselective fluorescent sensors for tartrate anion based on acridinezswsxa

Novel chiral fluorescence sensors L-1 and D-1 incorporating N-Boc-protected alanine and acridine moieties were synthesized. The recognition ability of the sensors was studied by fluorescence titration, ¹ H NMR spectroscopy and density functional theory (DFT) calculations. The sensors exhibited good enantioselective fluorescent sensing ability toward enantiomers of tartrate anion for the selected carboxylate anions and formed 1: 1 complexes by multiple hydrogen bonding interactions.