Helmet-Roled Molecules Carrying Double Metronidazole Frameworks and Phenyl Ring for Strengthening Adsorption and Anticorrosion on Mild Steel

This study prepared new helmet-roled molecules (HMs) carrying metronidazole frameworks and a phenyl ring for strengthening adsorption and anticorrosion on mild steel. The adsorption of the HMs on the copper surface was understood by material simulation computation. Furthermore, the surface analysis experiments suggest that the studied molecules could be adsorbed to a mild steel surface through the chemical coordination bonding. The remarkable corrosion resistance of the HMs for mild steel in HCl was surveyed by potentiodynamic polarization and electrochemical impedance spectroscopy at 298 K. The HMs including two metronidazole skeletons displayed the stronger corrosion inhibition effect on mild steel than the HM1 bearing one single metronidazole part (the corrosion inhibition efficiency, HM3, 98.03%, HM2, 95.14%, HM1, 88.72%). The results presented in this study provided an efficient strategy to develop new clinical medicine-based corrosion inhibitors for metal in acid medium through molecular preconstruction.

Electrochemical, surface morphological and computational evaluation on carbohydrazide Schiff bases as corrosion inhibitor for mild steel in acidic medium

Anticorrosion and adsorption behaviour of synthesized carbohydrazide Schiff bases, namely (Z)-N'-(4-hydroxy-3-methoxybenzylidene)-6-methyl-2-oxo-4-phenyl-1,2,3,4-tetrahydropyrimidine-5-carbohydrazide(MBTC) and (Z)-N'-(3,4-dichlorobenzylidene)-6-methyl-2-oxo-4-phenyl-1,2,3,4-tetrahydropyrimidine-5-carbohydrazide (CBTC) was examined for mild steel (MS) in 15% HCl medium. The corrosion inhibition study was performed by using gravimetric, thermodynamic, electrochemical and theoretical studies including density functional theory (DFT), molecular dynamic simulation (MDS) and Monte Carlo simulations (MCS). The outcomes in terms of corrosion inhibition efficiency using electrochemical impedance spectroscopy (EIS) method at 303 K and 150 ppm concentration were 96.75% for MBTC and 95.14% for CBTC. Both inhibitors adsorbed on the MS surface through physical as well as chemical adsorption and followed the Langmuir isotherm. The mixed-type nature of both inhibitors was identified by polarization results. Surface analysis was done using FESEM, EDX, AFM and XPS studies and results showed that a protective layer of inhibitor molecules was developed over the surface of MS. The results of DFT, MCS and MDS are in accordance with experimental results obtained by weight loss and electrochemical methods.

Experimental and Theoretical Studies on Acid Corrosion Inhibition of API 5L X70 Steel with Novel 1-N-α-d-Glucopyranosyl-1H-1,2,3-Triazole Xanthines

A series of novel 1-N-α-d-glucopyranosyl-1H-1,2,3-triazole xanthines was synthesized from azido sugars (glucose, galactose, and lactose) and propargyl xanthines (theophylline and theobromine) using a typical copper (I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition. The corrosion inhibition activities of these new carbohydrate-xanthine compounds were evaluated by studying the corrosion of API 5 L X70 steel in a 1 M HCl medium. The results showed that, at 10 ppm, a 90% inhibition efficiency was reached by electrochemical impedance spectroscopy. The inhibitory efficiency of these molecules is explained by means of quantum chemical calculations of the protonated species with the solvent effect, which seems to better represent the actual situation of the experimental conditions. Some quantum chemical parameters were analyzed to characterize the inhibition performance of the tested molecules.

Corrosion mitigation for steel in acid environment using novel p-phenylenediamine and benzidine coumarin derivatives: synthesis, electrochemical, computational and SRB biological resistivity

Three novel p-phenylenediamine and benzidine coumarin derivatives were synthetized, namely: 4,4'-((((1,4-phenylenebis(azaneylylidene))bis(ethan-1-yl-1-ylidene))bis(2-oxo-2H-chromene-3,6-diyl))bis(diazene-2,1-diyl))dibenzenesulfonic acid (PhODB), 4,4'-(((-([1,1'-biphenyl]-4,4'-diylbis(azaneylylidene))bis(ethan-1-yl-1-ylidene))bis(2-oxo-2H-chromene-3,6-diyl))bis(diazene-2,1-diyl))dibenzenesulfonic acid (BODB) and 4,4'-(((-((3,3'-dimethoxy-[1,1'-biphenyl]-4,4'-diyl)bis(azaneylylidene))bis(ethan-1-yl-1-ylidene))bis(2-oxo-2H-chromene-3,6-iyl))bis(diazene-2,1-diyl))dibenzenesulfonic acid (DODB). Their chemical structures were proved by performing Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance and mass spectrometry analysis. The synthesized p-phenylenediamine and benzidine coumarin derivatives were tested as corrosion inhibitors for mild steel (MS) in 1 M HCl solution using weight loss, electrochemical, morphological, and theoretical studies. The compound 3,3'-dimethoxy benzidine coumarin derivative (DODB) was proved to give the highest efficiency with 94.98% obtained from weight loss measurements. These compounds are mixed inhibitors, as seen by the polarization curves. Impedance diagrams showed that when the concentration of these derivatives rose, the double-layer capacitance fell and the charge transfer resistance increased. Calculated thermodynamic parameters were computed and the mechanism of adsorption was also studied for the synthesized p-phenylenediamine and benzidine coumarin derivatives. The ability of the synthesized derivatives to protect the surface against corrosion was investigated by scanning electron microscope (SEM), UV-visible spectroscopy and energy dispersive X-ray spectroscopy (EDX). Theoretical chemical calculations (DFT) and biological resistivity (SRB) were investigated.

Hydroquinone Decorated with Alkyne, Quaternary Ammonium, and Hydrophobic Motifs to Mitigate Corrosion of X-60 Mild Steel in 15 wt.% HCl

1-(6-Bromohexyloxy)-4-propargyloxybenzene upon quaternization with 3-dimethylamino-1-propanol and N,N-dimethyldodecylamine produced two new inhibitor molecules: N-[6-(4-Propargyloxyphenoxy)hexyl]-N,N-dimethyl-N-(3-hydroxypropyl)ammonium bromide (PHAB) and N-[6-(4-Propargyloxyphenoxy)hexyl]-N,N-dimethyl-N-dodecylammonium bromide (PDAB), respectively, in excellent yields. The inhibitor molecules were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹ H NMR, and ¹³ C NMR spectroscopy. The inhibitors were evaluated for X-60 mild steel corrosion in 15 wt.% HCl using different electrochemical and gravimetric techniques. The potentiodynamic polarization confirms both the inhibitors as mixed-type corrosion inhibitors. A low concentration (15 ppm) of PDAB has demonstrated excellent corrosion inhibition efficiencies of 97%, 98%, and 86% at 25 °C, 50 °C, and 70 °C, respectively, for 24 h exposure time. SEM and EDX spectra reveal that the adsorptions of corrosion inhibitors on X-60 mild steel create a protective film that serves as a barrier to mitigate the corrosion process. The X-ray photoelectron spectroscopy confirmed the chemical interaction between the corrosion inhibitors and mild steel, which was predicted by the Langmuir adsorption model. Assembly of inhibitive motifs of the alkyne, π-electron-rich aromatic, quaternary ammonium and C₁₂ alkyl chain hydrophobe in PDAB has augmented its inhibiting action.

Comparative Investigation of Corrosion-Mitigating Behavior of Thiadiazole-Derived Bis-Schiff Bases for Mild Steel in Acid Medium: Experimental, Theoretical, and Surface Study

In the present study, comparative analyses of corrosion inhibition property of few thiadiazole-derived bis-Schiff bases for mild steel in 1 M HCl were done. Various electrochemical experiments (electrochemical impedance spectroscopy and potentiodynamic polarization), as well as weight loss experiments, were employed to study the anticorrosion activity of bis-Schiff bases as inhibitors. The highest inhibition efficiency was obtained at an optimum concentration of 125 ppm for all inhibitors. Potentiodynamic polarization studies explain the mixed type but predominantly the cathodic nature of all inhibitors. The Langmuir adsorption isotherm was used to describe the mechanism of adsorption. The change in the value of activation energy on the addition of inhibitors reflects the mixed mode of interaction between the inhibitor and metallic surface. Scanning electron microscopy with energy-dispersive spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses confirmed the adsorption of bis-Schiff bases on the metal surface and thereby shielding from corrosion. Besides, the relevance between inhibition efficiency and the molecular structure of an inhibitor was theoretically examined via quantum chemical calculations and molecular dynamics simulations. All the results show consistent agreement with each other.

Preparation and Application of Modified Imidazole with MPEG (Polyethylene Glycol Monomethyl Ether) as Carbon Steel Inhibitor

The inhibition effect of three inhibitors with different chain lengths of their ether groups on Q235 steel in 0.5 M HCl solution at 318 K was determined by means of weight loss measureme nt, electrochemical methods (Tafel and EIS) and surface analysis (SEM). Moreover, the further study of corrosion inhibition mechanism was also conducted by computational methods (Quantum chemical calculations and Molecular dynamics simulations). Results reveal that the three inhibitors exhibit an excellent inhibition performance for carbon steel, and the corrosion inhibition efficiency of the three inhibitors increases with the increase of the chain length, which favors the formation of a protection film adsorbed on the surface. Analysis of polarization data informs that the adsorption type of three inhibitors basically obeys the Langmuir monolaye r adsorption, which is mainly of chemisorptive nature. Computational methods also tell that the three inhibitors possess a high reactivity and strong interaction with the iron surface, furthermore, the interaction is increased with the increase of the chain length of three inhibitors. The conclusion is in good agreement with the experimental results.

A Universal Photochemical Method to Prepare Carbohydrate Sensors Based on Perfluorophenylazide Modified Polydopamine for Study of Carbohydrate-Lectin Interactions by QCM Biosensor

A universal photochemical method to prepare carbohydrate sensors based on perfluorophenylazide (PFPA) modified polydopamine (PDA) for the study of carbohydrate–lectin interactions by a quartz crystal microbalance (QCM) biosensor was developed. The PFPA was immobilized on PDA-coated gold sensors via Schiff base reactions. Upon light irradiation, the underivatized carbohydrates were inserted into the sensor surface, including mannose, galactose, fucose and N-acetylglucosamine (GlcNAc). Carbohydrate sensors were evaluated for the binding to a series of plant lectins. A kinetic study of the interactions between mannose and concanavalin A (Con A), fucose and Ulex europaeus agglutinin I (UEA-I) were performed. This method can eliminate the tedious modification of carbohydrates, improve the experimental efficiency, and reduce the experimental cost, which is of great significance for the development of QCM biosensors and the study of biomolecular interactions.

Highly efficient eco-friendly corrosion inhibitor for mild steel in 5 M HCl at elevated temperatures: experimental & molecular dynamics study

Laurhydrazide N′-propan-3-one was used as an eco-friendly inhibitor for the corrosion of mild steel in 5 M HCl at elevated temperatures. Various electrochemical techniques and surface characterization methods were utilized in this study. In addition, the kinetics and thermodynamic parameters were calculated and discussed. Furthermore, a geometry optimization of LHP was performed and the time-dependent density functional theory was utilized to calculate the electronic absorption spectra. Finally, frequency calculations were, also, performed on the optimized geometry.

Biofilm development of Bacillus thuringiensis on MWCNT buckypaper: Adsorption-synergic biodegradation of phenanthrene

Adsorption-synergic biodegradation of a model PAH (phenanthrene, Phe) on MWCNT buckypaper surface with a potential PAH biodegrading bacterial strain Bacillus thuringiensis AT.ISM.11 has been studied in aqueous medium. Adsorption of Phe on buckypaper follows Dubinin-Ashtakhov model (R² = 0.9895). MWCNT generally exerts toxicity to microbes but adsorbed layer of Phe prevents the direct contact between MWCNT and bacterial cell wall. FESEM study suggests that formation of biofilms occurred on buckypaper. Lower layer cells are disrupted and flattened as they are in direct contact with MWCNT but the upper layer cells of the developed biofilm are fully intact and functional. Force-distance curves of Bacillus thuringiensis AT.ISM.11 with buckypaper indicates adhesion forces varied from -10.3 to -15.6 nN with increasing contact time, which supports the phenomenon of biofilm formation. AFM surface statistical data of buckypaper suggests increase in bacterial cell count increases the Rms roughness (95.7242-632.565) while adhering to the buckypaper surface to form biofilm. We observed an enhanced Phe biodegradation of 93.81% from that of the 65.71% in 15 days' study period, using buckypaper as a bio-carrier or a matrix for the microbial growth. GC-MS study identified phthalic acid ester as metabolite, which is the evidence of protocatechuate pathway degradation of Phe. Current study enlightens the interaction between hydrocarbons and microbes in presence of MWCNT buckypaper matrix in aqueous system for the first time. An enhancement in biodegradation of Phe by 28.10% has also been reported which can be a basis for CNT aided enhanced biodegradation studies in future.

Functional polyaspartic acid derivatives as eco-friendly corrosion inhibitors for mild steel in 0.5 M H2SO4 solution

To improve the corrosion inhibition efficiency of eco-friendly polyaspartic acid (PASP) for mild steel in acidic solutions, PASP/N-(3-aminopropyl)imidazole (PD-1) and PASP/N-(3-aminopropyl)-imidazole-co-n-dodecylamine (PD-2) were chemically synthesized by the facile ring-opening reaction of polysuccinimide. Inhibition efficiencies of PD-1 and PD-2 for mild steel in a 0.5 M H₂SO₄ solution were investigated by electrochemical measurements (electrochemical impedance and polarization) and the weight loss method. In comparison with PASP, PD-1 and PD-2 show improved inhibition efficiencies due to the functional groups. In particular, PD-2 shows superior corrosion inhibition capacity, and the efficiency is up to 94% at a relatively low concentration of 100 mg L⁻¹ at 298 K, as determined by potentiodynamic polarization measurements. Surface analysis of mild steel with PD-2 as an inhibitor clearly indicates that the inhibitor molecules adsorb on the steel surface and efficiently inhibit the corrosion of mild steel. The present work provides very meaningful results in designing and preparing new polymer inhibitors with high inhibition efficiency.

To improve the corrosion inhibition efficiency of polyaspartic acid (PASP) for mild steel in acidic solutions, PASP/N-(3-aminopropyl)imidazole (PD-1) and PASP/N-(3-aminopropyl)-imidazole-co-n-dodecylamine (PD-2) were synthesized.

Theoretical, thermodynamic and electrochemical analysis of biotin drug as an impending corrosion inhibitor for mild steel in 15% hydrochloric acid

The corrosion mitigation efficiency of biotin drug for mild steel in 15% hydrochloric acid was thoroughly investigated by weight loss and electrochemical methods. The surface morphology was studied by the contact angle, scanning electrochemical microscopy, atomic force microscopy and scanning electron microscopy methods. Quantum chemical calculation and Fukui analysis were done to correlate the experimental and theoretical data. The influence of the concentration of inhibitor, immersion time, temperature, activation energy, enthalpy and entropy has been reported. The mitigation efficiency of biotin obtained by all methods was in good correlation with each other. Polarization studies revealed that biotin acted as a mixed inhibitor. The adsorption of biotin was found to obey the Langmuir adsorption isotherm. Surface studies showed the hydrophobic nature of the steel with inhibitor and vindicated the formation of a film on the metal surface that reduced the corrosion rate.