Bovine Serum Albumin - Hydroxyapatite Nanoflowers as Potential Local Drug Delivery System of Ciprofloxacin

Introduction

Hybrid nanoflowers are structures consisting of organic (enzymes, proteins, nucleic acids) and inorganic components (mostly metal phosphates) with a flower-like hierarchical structure. Novel hybrid nanoflowers based on bovine serum albumin (BSA) and hydroxyapatite (HA) were obtained and characterized. Study on BSA-HA nanoflowers as potential drug delivery system is reported for the first time.

Methods

Embedding ciprofloxacin in the structure of hybrid nanoflowers was confirmed by ATR-FTIR and thermogravimetric analysis. The inorganic phase of the nanoflowers was determined by X-ray diffraction. UV‒Vis spectroscopy was used to evaluate the release profiles of ciprofloxacin from nanoflowers in buffer solutions at pH 7.4 and 5. The agar disk diffusion method was used to study the antibacterial activity of the synthesized nanoflowers against Staphylococcus aureus and Pseudomonas aeruginosa.

Results

Bovine serum albumin - hydroxyapatite nanoflowers were obtained with diameters of ca. 1-2 µm. The kinetics of ciprofloxacin release from nanoflowers were described by the Korsmeyer-Peppas model. The antibacterial activity of the synthesized nanoflowers was demonstrated against S. aureus and P. aeruginosa, two main pathogens found in osteomyelitis.

Conclusion

The formulated nanoflowers may act as an efficient local antibiotic delivery system. Due to the use of nonhazardous, biodegradable components and benign synthesis, hybrid nanoflowers are very promising drug delivery systems that could be applied in the treatment of skeletal system infections.

A functional nanoflower based lateral flow immunoassay for the rapid and robust detection of pathogens

In the face of complex public health emergencies and various social medical needs in new situations, it is urgent to establish rapid detection technology for the early detection of pathogens to control their spread and minimize the resultant health and societal impact. Point-of-care testing (POCT) that allows rapid, on-site, and affordable detection and monitoring of health conditions at home or away from clinical labs has received increasing attention in modern medicine. In this work, we have synthesized multifunctional magainin I-human chorionic gonadotropin (hCG)-Cu₃(PO₄)₂ nanoflowers and demonstrated a new strategy for the fast diagnosis of pathogenic microorganisms by combining functional nanoflowers with a lateral flow immunoassay device. The prepared multifunctional nanoflowers immobilized many signal molecules, which solves the poor sensitivity of traditional lateral flow strips and realizes the highly sensitive detection of pathogenic microorganisms ("accurate detection"). Besides, this method can complete the rapid transformation of commercial-off-the-shelf lateral flow strips and realize the fast diagnosis of target analytes in case of an outbreak ("fast detection"). Therefore, the established rapid and highly sensitive lateral flow immunoassay for the detection of pathogenic microorganisms will effectively improve the early diagnosis efficiency of infectious diseases caused by pathogenic microorganisms and shorten the diagnosis time of diseases.

Immobilization of Bacillus amyloliquefaciens protease "Neutrase" as hybrid enzyme inorganic nanoflower particles: A new biocatalyst for aldol-type and multicomponent reactions

Organic-inorganic hybrid nanoflowers (hNFs) with commercial protease "Neutrase" is proposed and characterized as efficient and green biocatalysts for promiscuous catalysis in aldol-type and multicomponent reactions. Neutrase hNFs [Neutrase-(Cu/Ca/Co/Mn)₃(PO₄)₂] are straightforwardly prepared through mixing metal ion (Cu²⁺, Ca²⁺, Co²⁺ or Mn²⁺) aqueous solutions with Neutrase in phosphate buffer (pH 7.4, 10 mM) resulting in precipitation (3 days). The hNFs were characterized by various techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX), element mapping, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In SEM images, the metal-Neutrase complexes revealed flower-like or granular structures after hybridization. The effect of metal ions and enzyme concentrations on the morphology and enzyme activity of the Neutrase-hNFs was examined. The synthesized Neutrase-Mn hNFs showed superior activity and stability compared to free Neutrase. Traditional organic CC coupling reactions such as aldol condensation, decarboxylative aldol, Knoevenagel, Hantzsch-type reactions and synthesis of 4H-pyran derivatives were used to test the generality and scope of Neutrase promiscuity, while optimizing conditions for the Neutrase-Mn hNF biocatalyst. Briefly, Neutrase-Mn₃(PO₄)₂ hNFs showed excellent enzyme activity, stability and reusability, qualifying as effective reusable catalysts for coupling reactions under mild conditions.

Organic-inorganic epoxide hydrolase hybrid nanoflowers with enhanced catalytic activity: Hydrolysis of styrene oxide to 1-phenyl-1,2-ethanediol

Epoxide hydrolases are ubiquitous in nature and are utilized to catalyze the cofactor-independent hydrolysis of epoxides to their corresponding diols. These enzymes have tremendous potential and have been applied in the synthesis of bulk and fine chemical industry and utilized as chiral building blocks. Herein, we report a green, facile, and economical method for immobilization of epoxide hydrolase based on biomimetic mineralization. The organic-inorganic hybrid nanoflowers have received tremendous attention due to their higher catalytic activity and stability. The nanoflowers were synthesized, with the organic component being enzyme epoxide hydrolase and the inorganic component being Ca²⁺ ions. A unique hierarchical flower-like spherical structure with hundreds of spiked petals was observed. The synthesized nanoflowers were applied for styrene oxide hydrolysis, producing 1-phenyl-1,2-ethanediol. Further, the factors influencing the morphology, catalytic activity, and stability studies were performed to study the activity recovery of the synthesized organic-inorganic hybrid epoxide hydrolase nanoflowers. The findings will have interesting applications.

Understanding intricacies of bioinspired organic-inorganic hybrid nanoflowers: A quest to achieve enhanced biomolecules immobilization for biocatalytic, biosensing and bioremediation applications

The immobilization of biomolecules has been a subject of interest for scientists for a long time. The organic-inorganic hybrid nanoflowers are a new class of nanostructures that act as a host platform for the immobilization of such biomolecules. It provides better practical applicability to these functional biomolecules while also providing superior activity and reusability when catalysis is involved. These nanostructures have a versatile and straightforward synthesis process and also exhibit enzyme mimicking activity in many cases. However, this facile synthesis involves many intricacies that require in-depth analysis to fully attain its potential as an immobilization technique. A complete account of all the factors involving the synthesis process optimisation is essential to be studied to make it commercially viable. This paper explores all the different aspects of hybrid nanoflowers which sets them apart from the conventional immobilization techniques while also giving an overview of its wide range of applications in industries.

Organic-Inorganic Hybrid Nanoflower Production and Analytical Utilization: Fundamental to Cutting-Edge Technologies

Over the past decade, science has experienced a growing rise in nanotechnology with ground-breaking contributions. Through various laborious technologies, nanomaterials with different architectures from 0 D to 3 D have been synthesized. However, the 3 D flower-like organic-inorganic hybrid nanomaterial with the most direct one-pot green synthesis method has attracted widespread attention and instantly become research hotspot since its first allusion in 2012. Mild synthesis procedure, high surface-to-volume ratio, enhanced enzymatic activity and stability are the main factor for its rapid development. However, its lower mechanical strength, difficulties in recovery from the reaction system, lower loading capacity, poor reusability and accessibility of enzymes are fatal, which hinders its wide application in industry. This review first discusses the selection of non-enzymatic biomolecules for the synthesis of hybrid nanoflowers followed by the innovative advancements made in organic-inorganic hybrid nanoflowers to overcome aforementioned issues and to enhance their extensive downstream applications in transduction technologies. Besides, the role of hybrid nanoflower has been successfully utilized in many fields including, water remediation, biocatalyst, pollutant adsorption and decolourization, nanoreactor, biosensing, cellular uptake and others, accompanied with several quantification technologies, such as ELISA, electrochemical, surface plasmon resonance (SPR), colorimetric, and fluorescence were comprehensively reviewed.

A Colorimetric Immunosensor Based on Hemin@MI Nanozyme Composites, with Peroxidase-like Activity for Point-of-care Testing of Pathogenic E. coli O157:H7

Recently, nanozymes have become a topic of particular interest due to their high activity level, stability and biocompatibility. In this study, a visual, sensitive and selective point-of-care immunosensor was established to test the pathogen Escherichia coli O157:H7 (E. coli O157:H7). Hemin and magainin I (MI) hybrid nanocomposites (Hemin@MI) with peroxidase-mimicking activities were synthesized via a "one-pot" method, involving the simple mixing of an antimicrobial peptide (MI) against E. coli O157:H7 and hemin in a copper sulfate sodium phosphate saline buffer. Hemin@MI nanocomposites integrating target recognition and signal amplification were developed as signal probes for the point-of-care colorimetric detection of pathogenic E. coli O157:H7. Hemin@MI nanocomposites exhibit excellent peroxidase activity for the chromogenic reaction of ABTS, which allows for the visual point-of-care testing of E. coli O157:H7 in the range of 10² to 10⁸ CFU/mL, with a limit of detection of 85 CFU/mL. These data suggest this immunosensor provides accessible and portable assessments of pathogenic E. coli O157:H7 in real samples.

Organic-inorganic nanoflowers: from design strategy to biomedical applications

Organic-inorganic hybrid nanoflowers (NF) with sizes or features on a nanoscale are a class of flower-shaped nanomaterials self-assembled from metal ions and organic components. Here, to be more specific, the organic components mainly refer to biomolecules ranging from proteins, peptides, and amino acids to DNA/RNA. Beyond their pleasing aesthetics, their unique properties and integrated functions have attracted widespread interest and made them promising candidates in the application of biomedical areas. Great efforts have been made to design and synthesize versatile functional hybrid nanoflowers. In this review, we begin with the clarification of versatile recently reported hybrid nanoflowers according to the types of metal ions and biomolecules employed. To highlight the design of organic-inorganic hybrid nanoflowers, their synthetic methods and mechanisms, structural and biological characteristics are discussed. After that, the state-of-the-art applications of hybrid nanoflowers in biomedical fields including biosensing, biocatalysis, and cancer therapy are demonstrated. In the end, we discuss the prospects of organic-inorganic hybrid nanoflowers and highlight the challenges and opportunities for future research.

Coordination and redox interactions of β-lactam antibiotics with Cu2+ in physiological settings and the impact on antibacterial activity

An increase in the copper pool in body fluids has been related to a number of pathological conditions, including infections. Copper ions may affect antibiotics via the formation of coordination bonds and/or redox reactions. Herein, we analyzed the interactions of Cu²⁺ with eight β-lactam antibiotics using UV-Vis spectrophotometry, EPR spectroscopy, and electrochemical methods. Penicillin G did not show any detectable interactions with Cu²⁺. Ampicillin, amoxicillin and cephalexin formed stable colored complexes with octahedral coordination environment of Cu²⁺ with tetragonal distortion, and primary amine group as the site of coordinate bond formation. These β-lactams increased the solubility of Cu²⁺ in the phosphate buffer. Ceftazidime and Cu²⁺ formed a complex with a similar geometry and gave rise to an organic radical. Ceftriaxone-Cu²⁺ complex appears to exhibit different geometry. All complexes showed 1:1 stoichiometry. Cefaclor reduced Cu²⁺ to Cu¹⁺ that further reacted with molecular oxygen to produce hydrogen peroxide. Finally, meropenem underwent degradation in the presence of copper. The analysis of activity against Escherichia coli and Staphylococcus aureus showed that the effects of meropenem, amoxicillin, ampicillin, and ceftriaxone were significantly hindered in the presence of copper ions. The interactions with copper ions should be taken into account regarding the problem of antibiotic resistance and in the selection of the most efficient antimicrobial therapy for patients with altered copper homeostasis.

Recent advances in biomolecule immobilization based on self-assembly: organic-inorganic hybrid nanoflowers and metal-organic frameworks as novel substrates

In the past few years, the immobilization of biomolecules on hybrid nanoflowers and metal-organic frameworks (MOFs) via self-assembly synthesis has received much attention due to its simplicity, high efficiency, and a bright prospect of enhancing the stability, activity and even selectivity of biomolecules compared to conventional immobilization methods. In the synthesis of organic-inorganic hybrid nanoflowers, biomolecules used as organic components are simply mixed with metal ions which act as inorganic components to form flower-like nanocomposites, while in the self-assembly process of encapsulating biomolecules in MOFs (biomolecule@MOF composites), the biomolecules just need to be added to the precursor mixtures of MOFs, in which the biomolecules are therefore embedded in MOF crystals with small pores. In this review, we focus on the recent advances of these composites, especially in the synthesis strategies, mechanism and applications in biosensors, biomedicine, pollutant disposal, and industrial biocatalysis, and future perspectives are discussed as well.

Deuterohemin-Peptide Enzyme Mimic-Embedded Metal-Organic Frameworks through Biomimetic Mineralization with Efficient ATRP Catalytic Activity

An enzyme mimic harboring iron porphyrin (DhHP-6) embedded in zeolite imidazolate framework-8 (ZIF-8) was constructed through a biomimetic mineralization approach to obtain composite DhHP-6@ZIF-8. The composite was then used as a catalyst in the atom transfer radical polymerization (ATRP) of poly(ethylene glycol) methyl ether methacrylate (PEGMA₅₀₀) in which poly(PEGMA₅₀₀) could be synthesized with monomer conversion of 76.1% and M_n of 45 900 g/mol, stronger than that obtained when using free DhHP-6 as a catalyst. More importantly, it could efficiently overcome the drawbacks of free DhHP-6 and achieve the easy separation of DhHP-6 from the catalytic system and the elimination of iron residues in the synthesized polymer. In addition, it exhibited an enhanced recyclability with monomer conversion of 75.7% after five cycles and favorable stability during the ATRP reaction with <3.0% of DhHP-6 release within 100 h. Thus, the enzyme mimic-ZIF-8 composite developed through biomimetic mineralization can be potentially used as an effective catalyst for preparing well-defined polymers with biomedical applications.