Multi-charged nanoemulsion for photodynamic treatment of glioblastoma cell line in 2D and 3D in vitro models

Multi-charged nanoemulsions (NE) were designed to deliver Cannabidiol (CBD), Indocyanine green (ICG), and Protoporphyrin (PpIX) to treat glioblastoma (GBM) through Photodynamic Therapy (PDT). The phase-inversion temperature (PIT) method resulted in a highly stable NE that can be scaled easily, with a six-month shelf-life. We observed the quasi-spherical morphology of the nanoemulsions without any unencapsulated material and that 89% (± 5.5%) of the material was encapsulated. All physicochemical properties were within the expected range for a nanostructured drug delivery system, making these multi-charged nanoemulsions promising for further research and development. NE-PIC (NE-Protoporphyrin + Indocyanine + CBD) was easily internalized on GBM cells after three hours of incubation. Nanoemulsion (NE and NE-PIC) did not result in significant cytotoxicity, even for GBM or non-tumorigenic cell lines (NHF). Phototoxicity was significantly higher for the U87MG cell than the T98G cell when exposed to: visible (430 nm) and infrared (810 nm) laser light, with a difference of about 20%. From 50 mJ.cm-2, the viability of GBM cell lines decreases significantly, ranging from 65% to 85%. The NE-PIC was also effective for inhibiting cell proliferation into a 3D spheroidal GBM cell model, which is promising for mimicking the tumor cell environment. Irradiation at 810 nm was more effective in treating spheroid due to its deeper penetration in complex structures. NE-PIC has the potential as a drug delivery system for photoinactivation and photo diagnostic of GBM cell lines, taking advantage of the versatility of its active components.

Systematic Review of Photodynamic Therapy in Gliomas

Over the last 20 years, gliomas have made up over 89% of malignant CNS tumor cases in the American population (NIH SEER). Within this, glioblastoma is the most common subtype, comprising 57% of all glioma cases. Being highly aggressive, this deadly disease is known for its high genetic and phenotypic heterogeneity, rendering a complicated disease course. The current standard of care consists of maximally safe tumor resection concurrent with chemoradiotherapy. However, despite advances in technology and therapeutic modalities, rates of disease recurrence are still high and survivability remains low. Given the delicate nature of the tumor location, remaining margins following resection often initiate disease recurrence. Photodynamic therapy (PDT) is a therapeutic modality that, following the administration of a non-toxic photosensitizer, induces tumor-specific anti-cancer effects after localized, wavelength-specific illumination. Its effect against malignant glioma has been studied extensively over the last 30 years, in pre-clinical and clinical trials. Here, we provide a comprehensive review of the three generations of photosensitizers alongside their mechanisms of action, limitations, and future directions.

Hybrid Magnetic Lipid-Based Nanoparticles for Cancer Therapy

Cancer is one of the major public health problems worldwide. Despite the advances in cancer therapy, it remains a challenge due to the low specificity of treatment and the development of multidrug resistance mechanisms. To overcome these drawbacks, several drug delivery nanosystems have been investigated, among them, magnetic nanoparticles (MNP), especially superparamagnetic iron oxide nanoparticles (SPION), which have been applied for treating cancer. MNPs have the ability to be guided to the tumor microenvironment through an external applied magnetic field. Furthermore, in the presence of an alternating magnetic field (AMF) this nanocarrier can transform electromagnetic energy in heat (above 42 °C) through Néel and Brown relaxation, which makes it applicable for hyperthermia treatment. However, the low chemical and physical stability of MNPs makes their coating necessary. Thus, lipid-based nanoparticles, especially liposomes, have been used to encapsulate MNPs to improve their stability and enable their use as a cancer treatment. This review addresses the main features that make MNPs applicable for treating cancer and the most recent research in the nanomedicine field using hybrid magnetic lipid-based nanoparticles for this purpose.

Microfluidics in drug delivery: review of methods and applications

Microfluidics technology has emerged as a promising methodology for the fabrication of a wide variety of advanced drug delivery systems. Owing to its ability for accurate handling and processing of small quantities of fluidics as well as immense control over physicochemical properties of fabricated micro and nanoparticles (NPs), microfluidic technology has significantly improved the pharmacokinetics and pharmacodynamics of drugs. This emerging technology has offered numerous advantages over the conventional drug delivery methods for fabricating of a variety of micro and nanocarriers for poorly soluble drugs. In addition, a microfluidic system can be designed for targeted drug delivery aiming to increase the local bioavailability of drugs. This review spots the light on the recent advances made in the area of microfluidics including various methods of fabrication of drug carriers, their characterization, and unique features. Furthermore, applications of microfluidic technology for the robust fabrication and development of drug delivery systems, the existing challenges associated with conventional fabrication methodologies as well as the proposed solutions offered by microfluidic technology have been discussed in details.HighlightsMicrofluidic technology has revolutionized fabrication of tunable micro and nanocarriers.Microfluidic platforms offer several advantages over the conventional fabrication methods.Microfluidic devices hold great promise in controlling the physicochemical features of fabricated drug carriers.Micro and nanocarriers with controllable release kinetics and site-targeting efficiency can be fabricated.Drug carriers fabricated by microfluidic technology exhibited improved pharmacokinetic and pharmacodynamic profiles.

Nanoemulsion applications in photodynamic therapy

Nanoemulsion, or nanoscaled-size emulsions, is a thermodynamically stable system formed by blending two immiscible liquids, blended with an emulsifying agent to produce a single phase. Nanoemulsion science has advanced rapidly in recent years, and it has opened up new opportunities in a variety of fields, including pharmaceuticals, biotechnology, food, and cosmetics. Nanoemulsion has been recognized as a potential drug delivery technology for various drugs, such as photosensitizing agents (PS). In photodynamic therapy (PDT), PSs produce cytotoxic reactive oxygen species under specific light irradiation, which oxidize the surrounding tissues. Over the past decades, the idea of PS-loaded nanoemulsions has received researchers' attention due to their ability to overcome several limitations of common PSs, such as limited permeability, non-specific phototoxicity, hydrophobicity, low bioavailability, and self-aggregation tendency. This review aims to provide fundamental knowledge of nanoemulsion formulations and the principles of PDT. It also discusses nanoemulsion-based PDT strategies and examines nanoemulsion advantages for PDT, highlighting future possibilities for nanoemulsion use.

Advances in the Synthesis and Application of Magnetic Ferrite Nanoparticles for Cancer Therapy

Cancer is among the leading causes of mortality globally, with nearly 10 million deaths in 2020. The emergence of nanotechnology has revolutionised treatment strategies in medicine, with rigorous research focusing on designing multi-functional nanoparticles (NPs) that are biocompatible, non-toxic, and target-specific. Iron-oxide-based NPs have been successfully employed in theranostics as imaging agents and drug delivery vehicles for anti-cancer treatment. Substituted iron-oxides (MFe2O4) have emerged as potential nanocarriers due to their unique and attractive properties such as size and magnetic tunability, ease of synthesis, and manipulatable properties. Current research explores their potential use in hyperthermia and as drug delivery vehicles for cancer therapy. Significantly, there are considerations in applying iron-oxide-based NPs for enhanced biocompatibility, biodegradability, colloidal stability, lowered toxicity, and more efficient and targeted delivery. This review covers iron-oxide-based NPs in cancer therapy, focusing on recent research advances in the use of ferrites. Methods for the synthesis of cubic spinel ferrites and the requirements for their considerations as potential nanocarriers in cancer therapy are discussed. The review highlights surface modifications, where functionalisation with specific biomolecules can deliver better efficiency. Finally, the challenges and solutions for the use of ferrites in cancer therapy are summarised.

Gelatin nanoparticles via template polymerization for drug delivery system to photoprocess application in cells

Photodynamic therapy (PDT) is a clinical treatment based on the activation of light-absorbing photosensitizers (PS) to generate reactive oxygen species, which are toxic to the targeted disease cells. Because most PS are hydrophobic with poor water solubility, it is necessary to encapsulate and solubilize PS in aqueous conditions to improve the photodynamic action for this compound. In this work, gelatin-poly(acrylic acid) nanoparticles (PAA/gelatin nanoparticles) via template polymerization for incorporation aluminum chloride phthalocyanine (ClAlPc) as a model drug for PDT application were developed. Biocompatible core-shell polymeric nanoparticles were fabricated via template polymerization using gelatin and acrylic acid as a reaction system. The nanoparticulate system was studied by scanning electron microscopy, steady-state, and their biological activity was evaluated using in vitro cancer cell lines by classical MTT assay. The obtained nanoparticles had a spherical shape and DLS particle size were determined further and was found to be around 170 nm. The phthalocyanine-loaded-nanoparticles maintained their photophysical behaviour after encapsulation. It is found that ClAlPc can be released from the nanoparticles in a sustained manner with a small initial burst release. In vitro cytotoxicity revealed that ClAlPc-loaded nanoparticles had similar cytotoxicity to free ClAlPc with mouse melanoma cancer cell line (B16-F10). In vitro photoeffects assay indicated that the nanoparticle formulation was superior in anticancer effect to free ClAlPc on mouse melanoma cancer cell line B16-F10. The results indicate that ClAlPc encapsulated in gelatin-poly(acrylic acid) nanoparticles are a successful delivery system for improving photodynamic activity in the target tissue.

Synergistic effect of photobiomodulation and phthalocyanine photosensitizer on fibroblast signaling responses in an in vitro three-dimensional microenvironment

Photobiomodulation (PBM) is a promising medical treatment modality in the area of photodynamic therapy (PDT). In this study, we investigated the effect of combined therapy in a 3D microenvironment using aluminum chloride phthalocyanines (AlClPc) as the photosensitizing agent. Normal human fibroblast-containing collagen biomatrix was prepared and treated with an oil-in-water (o/a) AlClPc-loaded nanoemulsion (from 0.5 to 3.0 μM) and irradiated at a range of fluences (from 0.1 to 3.0 J/cm²) using a continuous-wave light-emitting diode (LED) irradiation system (660 nm). PBM at 1.2 J/cm² and AlClPc/NE at 0.5 μM modified the fibroblast signaling response under 3D conditions, promoting collagen synthesis, ROS production, MMP-9 secretion, proliferation of the actin network, and facile myofibroblastic differentiation. PBM alone (at 1.2 J/cm² and 0.3 J/cm²) had no significant effect on any of these parameters. The combined therapy affected myofibroblastic differentiation, inflammatory response, and extracellular matrix pliability, and should thus be examined further in subsequent studies considering that no side effects of PBM have been reported. Even though significant progress has been made in the field of phototherapy in recent years, it is necessary to further elucidate the detailed mechanisms underlying its effects already shown in 2D conditions to increase the acceptance of this beneficial and non-invasive therapeutic approach.

Cationic zinc (II) phthalocyanine nanoemulsions for photodynamic inactivation of resistant bacterial strains

BACKGROUND

The growing emergence of microbial resistance to antibiotics represents a worldwide challenge. Antimicrobial photodynamic inactivation (aPDI) has been introduced as an alternative technique, especially when combined with nanotechnology. Therefore, this study was designed to investigate the therapeutic merits of combined aPDI and nanoemulsion in infections caused by resistant bacterial strains.

METHODS

Cationic zinc (II) phthalocyanine nanoemulsions (ZnPc-NE) were prepared using isopropyl myristate (IPM) as oil phase, egg phosphatidylcholine (egg PC) as emulsifier, and N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB). Nanoemulsions were characterized for particle size, polydispersity, zeta potential, viscosity, and skin deposition. The in-vitro aPDI was investigated on human resistant pathogens; gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and gram-negative Multidrug-resistant strain of Escherichia coli (MDR E. coli), under different experimental conditions. In addition, in-vivo model of abrasion wound infected by MDR E. coli was induced in rats to investigate the therapeutic potential of the selected formulation.

RESULTS

It was evident that the selected ZnPc formulation (20 % IPM, 2 % egg PC and 0.5 % CTAB) displayed a particle size of 209.9 nm, zeta potential +73.1 mV, and 23.66 % deposition of ZnPc in skin layers. Furthermore, the selected formulation combined with light achieved almost 100 % eradication of the two bacterial strains, with superior bacterial load reduction and wound healing propertiesin-vivo, compared to either the nanoemulsion formulation or laser alone.

CONCLUSION

ZnPc nanoemulsion improved antimicrobial photodynamic therapy in inactivating resistant bacterial infections and provided a promising therapeutic means of treating serious infections, and hence could be applied in diseases caused by other bacterial strains.

Intranasal Nanoemulsions for Direct Nose-to-Brain Delivery of Actives for CNS Disorders

The treatment of various central nervous system (CNS) diseases has been challenging, despite the rapid development of several novel treatment approaches. The blood–brain barrier (BBB) is one of the major issues in the treatment of CNS diseases, having major role in the protection of the brain but simultaneously constituting the main limiting hurdle for drugs targeting the brain. Nasal drug delivery has gained significant interest for brain targeting over the past decades, wherein the drug is directly delivered to the brain by the trigeminal and olfactory pathway. Various novel and promising formulation approaches have been explored for drug targeting to the brain by nasal administration. Nanoemulsions have the potential to avoid problems, including low solubility, poor bioavailability, slow onset of action, and enzymatic degradation. The present review highlights research scenarios of nanoemulsions for nose-to-brain delivery for the management of CNS ailments classified on the basis of brain disorders and further identifies the areas that remain unexplored. The significance of the total dose delivered to the target region, biodistribution studies, and long-term toxicity studies have been identified as the key areas of future research.

Photosensitizing potential of tailored magnetite hybrid nanoparticles functionalized with levan and zinc (II) phthalocyanine

Phototherapies, including photodynamic therapy (PDT), have been widely used in the treatment of various diseases, especially for cancer. However, there is still a lack of effective, safe photosensitizers that would be well tolerated by patients. The combination of several methods (like phototherapy and hyperthermia) constitutes a modern therapeutic approach, which demands new materials based on components that are non-toxic without irradiation. Therefore, this study presents the synthesis and properties of novel, advanced nanomaterials in which the advantage features of the magnetic nanoparticles and photoactive compounds were combined. The primary purpose of this work was the synthesis of magnetic nanoparticles coated with biocompatible and antitumor polysaccharide - levan, previously unknown from scientific literature, and the deposition of potent photosensitizer - zinc(II) phthalocyanine on their surface. In order to better characterize the nature of the coating covering the magnetic core, the atomic force microscope analysis, a contact angle measurement, and the mechanical properties of pure levan and its blend with zinc(II) phthalocyanine films were investigated. This magnetic nanomaterial revealed the ability to generate singlet oxygen upon exposure to light. Finally, preliminary toxicity of obtained nanoparticles was tested using the Microtox® test - with and without irradiation.

Fabrication of Hybrid Membranes Containing Nylon-11 and Organic Semiconductor Particles with Potential Applications in Molecular Electronics

Chemical degradation is a major disadvantage in the development of organic semiconductors. This work proposes the manufacture and characterization of organic semiconductor membranes in order to prevent semiconductor properties decreasing. Semiconductor membranes consisting of Nylon-11 and particles of π-conjugated molecular semiconductors were manufactured by high-vacuum evaporation followed by thermal relaxation. Initially, and with the aim of obtaining semiconductor particles, bulk heterojunction (BHJ) was carried out using green chemistry techniques between the zinc phthalocyanine (ZnPc) and the zinc hexadecafluoro-phthalocyanine (F₁₆ZnPc) as n-type molecular semiconductors with the p-type molecular semiconductor dibenzotetrathiafulvalene (DBTTF). Consequently, the π-conjugated semiconductors particles were embedded in a Nylon-11 matrix and characterized, both structurally and considering their optical and electrical properties. Thin films of these materials were manufactured in order to comparatively study the membranes and precursor semiconductor particles. The membranes presented bandgap (E_g) values that were lower than those obtained in the films, which is an indicator of an improvement in their semiconductor capacity. Finally, the membranes were subjected to accelerated lighting conditions, to determine the stability of the polymer and the operating capacity of the membrane. After fatigue conditions, the electrical behavior of the proposed semiconductor membranes remained practically unaltered; therefore, they could have potential applications in molecular electronics. The chemical stability of membranes, which did not degrade in their polymer compound, nor in the semiconductor, was monitored by IR spectroscopy.

Cancer cell membrane-coated mesoporous silica loaded with superparamagnetic ferroferric oxide and Paclitaxel for the combination of Chemo/Magnetocaloric therapy on MDA-MB-231 cells

To effectively inhibit the growth of breast cancer cells (MDA-MB-231 cells) by the combination method of chemotherapy and magnetic hyperthermia, we fabricated a biomimetic drug delivery (CSiFePNs) system composed of mesoporous silica nanoparticles (MSNs) containing superparamagnetic ferroferric oxide and Paclitaxel (PTX) coated with MDA-MB-231 cell membranes (CMs). In the in vitro cytotoxicity tests, the MDA-MB-231 cells incubated with CSiFePNs obtained IC50 value of 0.8 μgL-1, 3.5-fold higher than that of SiFePNs. The combination method of chemotherapy and magnetic hyperthermia can effectively inhibit the growth of MDA-MB-231 cells.

Evolution of Magnetic Hyperthermia for Glioblastoma Multiforme Therapy

Glioblastoma multiforme (GBM) is the most common and aggressive type of glial tumor, and despite many recent advances, its prognosis remains dismal. Hence, new therapeutic approaches for successful GBM treatment are urgently required. Magnetic hyperthermia-mediated cancer therapy (MHCT), which is based on heating the tumor tissues using magnetic nanoparticles on exposure to an alternating magnetic field (AMF), has shown promising results in the preclinical studies conducted so far. The aim of this Review is to evaluate the progression of MHCT for GBM treatment and to determine its effectiveness on the treatment either alone or in combination with other adjuvant therapies. The preclinical studies presented MHCT as an effective treatment module for the reduction of tumor cell growth and increase in survival of the tumor models used. Over the years, much research has been done to prove MHCT alone as the missing notch for successful GBM therapy. However, very few combinatorial studies have been reported. Some of the clinical studies carried out so far depicted that MHCT could be applied safely while possessing minimal side effects. Finally, we believe that, in the future, advancements in magnetic nanosystems might contribute toward establishing MHCT as a potential treatment tool for glioma therapy.

Construction and Characterization of Phthalocyanine-Loaded Particles of Curdlan and Their Photosensitivity

To optimize the physicochemical properties of phthalocyanine (PC), we examined its behavior in particles of triple helix glucan curdlan (CUR). CUR was denatured and renatured in DMSO, in the presence of PC. Infrared spectroscopy and transmission electron microscopy (TEM) showed that PC and CUR formed an inclusion complex, in which PC was trapped inside CUR molecules. This redshifted the absorption peak of PC, which would improve its usefulness as a photosensitizer, because infrared light can penetrate more deeply into human tissues. The conductivity of the solution of CUR-PC was higher than the conductivities of either a CUR solution or a PC dispersion, indicating that CUR-PC is more water soluble than PC. In addition, CUR-PC was highly stable in water. Thus, the use of CUR as a carrier of PC improves several of its physical properties. PC is used as a photosensitizer for killing cancer cells, but its use is hampered by its low solubility. Further, its absorption range limits its use to a depth of 1–3 mm in tissues. CUR-PC, with its high solubility and infrared absorption peak, was highly effective as a photosensitizer. It killed 84% of HeLa cells under 15 min of long wavelength radiation and had little cytotoxicity in the absence of light. These results demonstrate that CUR-PC has promise as a photosensitizer, as well as provide theoretical support for a wide range of applications for PC and CUR.

Photodynamic therapy activity of zinc phthalocyanine linked to folic acid and magnetic nanoparticles

In this work, the photodynamic therapy (PDT) activities (using human carcinoma adherent MCF-7 cells) of zinc phthalocyanine derivatives: complexes 1 (Zn mono cinnamic acid phthalocyanine) and 2 (zinc mono carboxyphenoxy phthalocyanine) when covalently linked to folic acid (FA) and amine functionalized magnetic nanoparticles (AMNPs) are reported. The covalent linkage of asymmetric zinc cinnamic acid Pc (1) to FA (1-FA) through an amide bond is reported for the first time. Complex 1 is insoluble in water, but upon linkage to FA, (to form 1-FA) the molecule become water soluble, hence the UV-Vis spectrum and singlet oxygen quantum yield for 1-FA were also done in water since water solubility is essential for biological applications. The reported 2-FA is also water soluble. Linking complexes 1 and 2 to FA and AMNPs decreased the dark toxicity of 1 and 2 on MCF-7 cells. Pc-FA (1-FA and 2-FA) conjugates had better singlet oxygen quantum yields (Φ_∆) in DMSO as compared to Pc-AMNPs (1-AMNPs and 2-AMNPs). The water- soluble 1-FA and 2-FA also achieved a better photodynamic therapy (PDT) activity as compared to 1-AMNPs and 2-AMNPs. Folic acid targeting on the tumor cells may have also facilitated better bioavailability of 1-FA and 2-FA and improved PDT activity on MCF-7 cells over AMNPs carriers.

Magneto low-density nanoemulsion (MLDE): A potential vehicle for combined hyperthermia and photodynamic therapy to treat cancer selectively

In this paper, we introduce a new drug delivery system (DDS) called magneto low-density nanoemulsion (MLDE), which can carry maghemite nanoparticles and Chlorin e6 as an active photosensitizer drug. This design can enhance tumor damage after minor heat dissipation and/or minimum visible light photosensitization doses by classical magnetic hyperthermia (MHT) and photodynamic therapy (PDT), respectively. We establish protocols to prepare the MLDE and to load the drug combination onto it. The MLDE prepared herein is nanometric (<200 nm), has high encapsulation efficiency, and is stable for at least 12 months in water dispersions. Flow cytometry results demonstrated that MLDE presents targeted selectivity toward the MCF-7 breast cancer cell line but not in NHI-3T3 mouse fibroblast cell lines, because the MCF-7 cancer cell surface contains overexpressed low density lipoprotein (LDL) receptors. Despite this targeted effect, MHT or PDT alone does not prompt significant antiproliferative outcomes. On the other hand, MHT and PDT in combination induce a strong and synergic action on MCF-7 cells and reduce the cell viability. In conclusion, the developed MLDE deserves further investigation because it is biocompatible, displays good encapsulation efficiency, and is highly stable. Moreover, it is selectively taken up by cancer cell surfaces with receptor recognition based on LDL receptor overexpression, which potentiates the action of combined MHT and PDT.

Layer-by-layer hollow photosensitizer microcapsule design via a manganese carbonate hard template for photodynamic therapy in cells

BACKGROUND

Microcapsules fabricated using layer-by-layer self-assembly have unique properties, making them attractive for drug delivery applications. The technique has been improved, allowing the deposition of multiple layers of oppositely charged polyelectrolytes on spherical, colloidal templates. These templates can be decomposed by coating multiple layers, resulting in hollow shells. In this paper, we describe a novel drug delivery system for loading photosensitizer drugs into hollow multilayered microcapsules for photoprocess applications.

METHODS

Manganese carbonate particles were prepared by mixing NH₄HCO₃ and MnSO₄ and performing consecutive polyelectrolyte adsorption processes onto these templates using poly-(sodium 4-styrene sulfonate) and poly-(allylamine hydrocholoride). A photosensitizer was also incorporated into the layers. Hollow spheres were fabricated by removing the cores in the acidic solution. The hollow, multilayered microcapsules were studied by scanning electron microscopy, steady-state, and time-resolved techniques. Their biological activity was evaluated in vitro with cancer cells using a conventional MTT assay.

RESULTS

The synthesized CaCO₃ microparticles were uniform, non-aggregated, and highly porous spheres. The phthalocyanine derivatives loaded in the microcapsules maintained their photophysical behaviour after encapsulation. The spectroscopic results presented here showed excellent photophysical behaviour of the studied drug. We observed a desirable increase in singlet oxygen production, which is favourable for the PDT protocol. Cell viability after treatment was determined and the proposed microcapsules caused 80% cell death compared to the control.

CONCLUSIONS

The results demonstrate that photosensitizer adsorption into the CaCO₃ microparticle voids together with the layer-by-layer assembly of biopolymers provide a method for the fabrication of biocompatible microcapsules for use as biomaterials.

Preparation of gelatin nanoparticles by two step desolvation method for application in photodynamic therapy

Gelatin nanoparticles have recently been receiving considerable attention because they offer a good option as release systems due to their low cost, biocompatibility, biodegradability and its application in several types of formulations. This study aim was to evaluate the potential application of gelatin nanoparticles entrapping a photosensitizer in Photodynamic Therapy. Gelatin nanoparticles were studied by steady-state techniques and the biological activity evaluated by in vitro MTT assay. The particles were spherical in shape exhibiting a 273 nm diameter with a low tendency to aggregate. The loading efficiency was 76%. Photosensitizer photophysical properties were shown to be preserved after GN encapsulation. The cells viability obtaining 85% cells death compared with control. The results demonstrate that gelatin nanoparticles can be successfully applied for photosensitizers encapsulation or other active drugs and be used as an optimal medium for a variety of bioactive materials, which can also be encapsulated by the proposed method.

Photophysicochemical behaviour and antimicrobial properties of monocarboxy Mg (II) and Al (III) phthalocyanine-magnetite conjugates

Asymmetric Mg (II) or Al (III) phthalocyanine (containing a COOH group and 3-pyridylsulfanyl units) was conjugated via an amide bond to amino functionalized magnetic nanoparticle (AIMN) to form MgPc-AIMN or AlPc-AIMN conjugate, and characterized. The photophysicochemical behaviour of the phthalocyanine-AIMN conjugates was investigated and compared to the asymmetric Pcs and to the simple mixture of Pc with AIMNs without a chemical bond, (MPc-AIMN (mixed)). The directed covalent linkage of AIMNs to the asymmetrical metallopthalocyanines afforded improvements in the singlet oxygen (Ф_Δ) and triplet state quantum yield (Ф_T) as well as singlet oxygen lifetimes for the MPcs-AIMN-linked conjugates compared to MPc-AIMN (mixed) and MPcs alone. The asymmetric phthalocyanines and their conjugates showed effective antimicrobial activity against Escherichia coli bacteria under illumination.

Recent advances of controlled drug delivery using microfluidic platforms

Conventional systematically-administered drugs distribute evenly throughout the body, get degraded and excreted rapidly while crossing many biological barriers, leaving minimum amounts of the drugs at pathological sites. Controlled drug delivery aims to deliver drugs to the target sites at desired rates and time, thus enhancing the drug efficacy, pharmacokinetics, and bioavailability while maintaining minimal side effects. Due to a number of unique advantages of the recent microfluidic lab-on-a-chip technology, microfluidic lab-on-a-chip has provided unprecedented opportunities for controlled drug delivery. Drugs can be efficiently delivered to the target sites at desired rates in a well-controlled manner by microfluidic platforms via integration, implantation, localization, automation, and precise control of various microdevice parameters. These features accordingly make reproducible, on-demand, and tunable drug delivery become feasible. On-demand self-tuning dynamic drug delivery systems have shown great potential for personalized drug delivery. This review presents an overview of recent advances in controlled drug delivery using microfluidic platforms. The review first briefly introduces microfabrication techniques of microfluidic platforms, followed by detailed descriptions of numerous microfluidic drug delivery systems that have significantly advanced the field of controlled drug delivery. Those microfluidic systems can be separated into four major categories, namely drug carrier-free micro-reservoir-based drug delivery systems, highly integrated carrier-free microfluidic lab-on-a-chip systems, drug carrier-integrated microfluidic systems, and microneedles. Microneedles can be further categorized into five different types, i.e. solid, porous, hollow, coated, and biodegradable microneedles, for controlled transdermal drug delivery. At the end, we discuss current limitations and future prospects of microfluidic platforms for controlled drug delivery.

Recent Progress in Synthesis and Functionalization of Multimodal Fluorescent-Magnetic Nanoparticles for Biological Applications

There is a great interest in the development of new nanomaterials for multimodal imaging applications in biology and medicine. Multimodal fluorescent-magnetic based nanomaterials deserve particular attention as they can be used as diagnostic and drug delivery tools, which could facilitate the diagnosis and treatment of cancer and many other diseases. This review focuses on the recent developments of magnetic-fluorescent nanocomposites and their biomedical applications. The recent advances in synthetic strategies and approaches for the preparation of fluorescent-magnetic nanocomposites are presented. The main biomedical uses of multimodal fluorescent-magnetic nanomaterials, including biological imaging, cancer therapy and drug delivery, are discussed, and prospects of this field are outlined.