Graphitic carbon nitride derived probes for the recognition of heavy metal pollutants of environmental concern in water bodies

Graphitic carbon nitride (g-CN) has a number of valuable features that have been recognized during the studies related to its photocatalytic activity enhancement derived by visible light. Because of these characteristics, g-CN can be used as a detecting signal transducer with different transmission modalities. The latest up-to-date detection capabilities of modified g-CN nanoarchitectures are covered in this study. The structural features and synthetic methodologies have been discussed in a number of reports. Herein, employment of the g-CN as a promising probing modality for the recognition of different toxic heavy metals is the promising feature of the present study.

Acid-activated carbon nitrides as photocatalysts for degrading organic pollutants under visible light

Three-dimensional (3D) carbon nitride (C₃N₄) can be used as a promising platform for visible-light-active photocatalysts because of its suitable band positions. This study reports that HNO₃ activation improves the photocatalytic activity of 3D melamine-derived C₃N₄ (MCN) materials, which degrade the organic pollutant rhodamine B (RhB). HNO₃ treatment under reflux removes the carbonaceous impurities in MCN and introduces oxygen-containing functional groups on its surface. Under visible light irradiation, the nitric acid treated MCN (NT-MCN) completely degrades RhB within 30 min. Photophysical characterizations and control experiments with radical scavengers reveal that MCN and NT-MCN follow different reaction mechanisms. Because NT-MCN exhibits a longer photoluminescence lifetime, smaller electrochemical resistance, and larger photocurrent than those of MCN, it enables a better transfer of charge carriers during the catalytic reaction.

Improved Performances of SiBCN Powders Modified Phenolic Resins-Carbon Fiber Composites

The effect of SiBCN powder on properties of phenolic resins and composites was analyzed. Compared with phenolic resins, the thermal stability of SiBCN powder modified phenolic resins (the SiBCN phenolic resins) by characterization of thermogravimetric analysis (TGA) improved clearly. It was found by X-ray photoelectron spectroscopy (XPS) that reactions between SiBCN powder and the pyrolysis product of phenolic resins were the main factor of the increased residual weight. TGA and static ablation of a muffle furnace were used to illustrate the roles of SiBCN powder on increasing oxidation resistance of SiBCN powder-modified phenolic resin–carbon fiber composites (SiBCN–phenolic/C composites), and the oxidative product was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). For SiBCN–phenolic/C composites, the occurrence of oxidation reaction and the formation of protective crust contributed to improving oxidative resistance. The result of the oxygen-acetylene test showed that the linear ablation rate (LAR) and mass ablation rate (MAR) of phenolic resin–carbon fiber composites reduced from 0.052 ± 0.005 mm/s to 0.038 ± 0.004 mm/s and from 0.050 ± 0.004 g/s to 0.043 ± 0.001 g/s by introducing SiBCN powder, respectively. The mechanism of ablation resistance after the introduction of SiBCN powder was investigated. The high melt-viscosity of SiBCN powder caused SiBCN powder to remain on the surface of composites and protect the internal resins and carbon fibers. The oxidation of SiBCN powder and volatilization of oxide can consume energy and oxygen, thus the ablation resistance of SiBCN–Ph composite was improved.

Polymer grafted graphitic carbon nitrides as precursors for reinforced lubricant hydrogels

Carbon nitride-based hydrogels are formed in a two-step procedure and feature significant toughness, compressibility and lubricant properties.

A label-free aptasensor for ultrasensitive Pb2+ detection based on electrochemiluminescence resonance energy transfer between carbon nitride nanofibers and Ru(phen)32

A label-free aptasensor was developed for ultrasensitive detection of Pb²⁺ based on electrochemiluminescence resonance energy transfer (ECL-RET) from graphitic carbon nitride nanofibers (CNNFs) to Ru(phen)₃²⁺. The CNNFs synthesized via a facile two-step hydrolysis-electrolysis strategy showed intense and stable ECL signal by taking advantages of amplifying and stabilizing effect of carbon nanotubes and Au nanoparticles. After the specific hybridation between capture DNA and Pb²⁺ specific aptamer, Ru(phen)₃²⁺ could be captured onto CNNFs modified electrode by effectively intercalating into the grooves of double-strand DNA, thus triggering the ECL-RET and leading to highly enhanced ECL intensity. The presence of Pb²⁺ would result in the detachment of Ru(phen)₃²⁺ and then the inhibition of ECL-RET. Then Pb²⁺ concentration could be quantified based on ECL change before and after introduction of Pb²⁺. The target recycling based on exonuclease I (Exo I) mediated digestion of Pb²⁺-aptamer complex was implemented to further improve the sensitivity. These synergistic amplification strategies enabled the aptasensor to be ultrasensitive for Pb²⁺ determination with a detection limit of 0.04 pM. The proposed probe was utilized to analyze environmental samples with satisfactory results.

Barbituric acid-modified graphitic carbon nitride nanosheets for ratiometric fluorescent detection of Cu2+

A ratiometric and visual fluorescent sensor for Cu²⁺ ions based on barbituric acid-modified graphitic carbon nitride nanosheets was designed.

Fluorescent probes and materials for detecting formaldehyde: from laboratory to indoor for environmental and health monitoring

Formaldehyde (FA), as a vital industrial chemical, is widely used in building materials and numerous living products.