Research progress in the degradation of printing and dyeing wastewater using chitosan based composite photocatalytic materials

The surge in economic growth has spurred the expansion of the textile industry, resulting in a continuous rise in the discharge of printing and dyeing wastewater. In contrast, the photocatalytic method harnesses light energy to degrade pollutants, boasting low energy consumption and high efficiency. Nevertheless, traditional photocatalysts suffer from limited light responsiveness, inadequate adsorption capabilities, susceptibility to agglomeration, and hydrophilicity, thereby curtailing their practical utility. Consequently, integrating appropriate carriers with traditional photocatalysts becomes imperative. The combination of chitosan and semiconductor materials stands out by reducing band gap energy, augmenting reactive sites, mitigating carrier recombination, bolstering structural stability, and notably advancing the photocatalytic degradation of printing and dyeing wastewater. This study embarks on an exploration by initially elucidating the technical principles, merits, and demerits of prevailing printing and dyeing wastewater treatment methodologies, with a focal emphasis on the photocatalytic approach. It delineates the constraints encountered by traditional photocatalysts in practical scenarios. Subsequently, it comprehensively encapsulates the research advancements and elucidates the reaction mechanisms underlying chitosan based composite materials employed in treating printing and dyeing wastewater. Finally, this work casts a forward-looking perspective on the future research trajectory of chitosan based photocatalysts, particularly in the realm of industrial applications.

A review on chitosan/metal oxide nanocomposites for applications in environmental remediation

A cleaner and safer environment is one of the most important requirements in the future. It has become increasingly urgent and important to fabricate novel environmentally-friendly materials to remove various hazardous pollutants. Compared with traditional materials, chitosan is a more environmentally friendly material due to its abundance, biocompatibility, biodegradability, film-forming ability and hydrophilicity. As an abundant of -NH2 and -OH groups on chitosan molecular chain could chelate with all kinds of metal ions efficiently, chitosan-based materials hold great potential as a versatile supporting matrix for metal oxide nanomaterials (MONMs) (TiO2, ZnO, SnO2, Fe3O4, etc.). Recently, many chitosan/metal oxide nanomaterials (CS/MONMs) have been reported as adsorbents, photocatalysts, heterogeneous Fenton-like agents, and sensors for potential and practical applications in environmental remediation and monitoring. This review analyzed and summarized the recent advances in CS/MONMs composites, which will provide plentiful and meaningful information on the preparation and application of CS/MONMs composites for wastewater treatment and help researchers to better understand the potential of CS/MONMs composites for environmental remediation and monitoring. In addition, the challenges of CS/MONM have been proposed.

Upcycling of waste EPS beads to immobilized codoped TiO2 photocatalysts for ciprofloxacin degradation and E. coli disinfection under sunlight

The emerging global problem of antimicrobial resistance needs immediate attention. In this regard, this work demonstrates the use of expanded polystyrene waste in the synthesis of immobilized photocatalytic films for the treatment of antibiotics as well as for bacterial disinfection. A boron-cerium codoped TiO2 catalyst (of specific composition: B0.8Ce0.2TiO2) was immobilized in an expanded polystyrene (EPS) film prepared from waste EPS beads. These films were studied for the degradation of ciprofloxacin (CIP) and disinfection of E. coli under sunlight. The film with a catalyst loading of 20 wt% showed a maximum degradation of 89% in 240 min with a corresponding TOC reduction of 84%. A 7.4 and 6.3 log reduction from the bacterial inactivation studies in the presence and absence of antibiotics, respectively, was obtained. The EPS film was stable after five times of reuse, and no significant chemical changes in the used film were observed from FTIR analysis. The average thickness of the prepared film was found from FESEM analysis to be 1.09 mm. These EPS films were also tested for degradation of other antibiotics, such as norfloxacin, levofloxacin and moxifloxacin. The EPS films were tested in two different reactor volumes at optimum conditions. Also, the effectiveness of B0.8Ce0.2TiO2/EPS film in real water samples indicates its potential in large-scale and real-world applications. Thus, these B0.8Ce0.2TiO2/EPS films can be effectively employed for both degradation of ciprofloxacin and the disinfection of E. coli under solar light to solve the increasing problem of antimicrobial resistance.

The use of chitosan-based composites for environmental remediation: A review

The presence of hazardous pollutants in water sources as a result of industrial activities is a major environmental challenge that impedes the availability of safe drinking water. Adsorptive and photocatalytic degradative removal of various pollutants in wastewater have been recognized as cost-effective and energy-efficient strategies. In addition to its biological activity, chitosan and its derivatives are considered as promising materials for the removal of various pollutants. The abundance of hydroxyl and amino groups in the chitosan macromolecular structure results in a variety of concurrent pollutant's adsorption mechanisms. Furthermore, adding chitosan to photocatalysts increases the mass transfer while decreasing both the band gap energy and the amount of intermediates produced during photocatalytic processes, improving the overall photocatalytic efficiency. Herein, we have reviewed the current design and preparation of chitosan and its composites, as well as their applications for the removal of various pollutants by adsorption and photocatalysis processes. Effects of operating variables such as the pH, catalyst mass, contact time, light wavelength, initial pollutant's concentration, and catalyst recyclability, are discussed. Various kinetic and isotherm models are presented to elucidate the rates, and mechanisms of pollutant's removal, onto chitosan-based composites, and several case studies are presented. Additionally, the antibacterial activity of chitosan-based composites has been discussed. This review aims to provide a comprehensive and up-to-date overview of the applications of chitosan-based composites in wastewater treatment and put forward new insights for the development of highly effective chitosan-based adsorbents and photocatalysts. Finally, the main challenges and future directions in the field are discussed.

BiVO4 As a Sustainable and Emerging Photocatalyst: Synthesis Methodologies, Engineering Properties, and Its Volatile Organic Compounds Degradation Efficiency

Bismuth vanadate (BiVO₄) is one of the best bismuth-based semiconducting materials because of its narrow band gap energy, good visible light absorption, unique physical and chemical characteristics, and non-toxic nature. In addition, BiVO₄ with different morphologies has been synthesized and exhibited excellent visible light photocatalytic efficiency in the degradation of various organic pollutants, including volatile organic compounds (VOCs). Nevertheless, the commercial scale utilization of BiVO₄ is significantly limited because of the poor separation (faster recombination rate) and transport ability of photogenerated electron-hole pairs. So, engineering/modifications of BiVO₄ materials are performed to enhance their structural, electronic, and morphological properties. Thus, this review article aims to provide a critical overview of advanced oxidation processes (AOPs), various semiconducting nanomaterials, BiVO₄ synthesis methodologies, engineering of BiVO₄ properties through making binary and ternary nanocomposites, and coupling with metals/non-metals and metal nanoparticles and the development of Z-scheme type nanocomposites, etc., and their visible light photocatalytic efficiency in VOCs degradation. In addition, future challenges and the way forward for improving the commercial-scale application of BiVO₄-based semiconducting nanomaterials are also discussed. Thus, we hope that this review is a valuable resource for designing BiVO₄-based nanocomposites with superior visible-light-driven photocatalytic efficiency in VOCs degradation.

Using visible light to activate antiviral and antimicrobial properties of TiO2 nanoparticles in paints and coatings: focus on new developments for frequent-touch surfaces in hospitals

The COVID-19 pandemic refocused scientists the world over to produce technologies that will be able to prevent the spread of such diseases in the future. One area that deservedly receives much attention is the disinfection of health facilities like hospitals, public areas like bathrooms and train stations, and cleaning areas in the food industry. Microorganisms and viruses can attach to and survive on surfaces for a long time in most cases, increasing the risk for infection. One of the most attractive disinfection methods is paints and coatings containing nanoparticles that act as photocatalysts. Of these, titanium dioxide is appealing due to its low cost and photoreactivity. However, on its own, it can only be activated under high-energy UV light due to the high band gap and fast recombination of photogenerated species. The ideal material or coating should be activated under artificial light conditions to impact indoor areas, especially considering wall paints or frequent-touch areas like door handles and elevator buttons. By introducing dopants to TiO₂ NPs, the bandgap can be lowered to a state of visible-light photocatalysis occurring. Naturally, many researchers are exploring this property now. This review article highlights the most recent advancements and research on visible-light activation of TiO₂-doped NPs in coatings and paints. The progress in fighting air pollution and personal protective equipment is also briefly discussed.

Graphical Abstract

Indoor visible-light photocatalytic activation of reactive oxygen species (ROS) over TiO₂ nanoparticles in paint to kill bacteria and coat frequently touched surfaces in the medical and food industries.

Impact of nano-glass (NG) particles on seed germination and it's accumulation in plant parts of wheat (Triticum aestivum L.)

Micro/nano-contaminants have been the focal pollutants in environmental science, which includes several nanomaterials, nanocomposites, fibers, glass, plastics etc. Micro/nano size pollutants are more harmful than macro pollutants due to their size. Therefore, there is an urgent need for research on the possible fate of glass particles in the environment, especially in plant and soil systems. Here, the synthesized nano-glass (NG) from the waste windshield and analyzed its uptake and effect on the wheat (Triticum aestivum L.) plant system in a hydroponic solution. The findings provided direct evidence that NG reduced the germination % with increasing NG concentrations as 100, 96, 92, and 92% for 10, 20, 30, and 40 mg L^-1. The lowest root and shoot height (15.40 and 22.42 cm) was achieved in the 40 mg L^-1 NG treatment. Decrement in fresh and dry wt. with a maximum reduction of chlorophyll a, b and total content (6.19, 4.98, and 11.17 mg g^-1 fresh wt.) was obtained at 40 mg L^-1 at 21 days. Rhodamine B was used for fluorescence imaging in seedlings to detect NG movement, Results showed that NG moves via xylem tissues of root part to other parts of the plant. Based on the currently limited or no data and uncertainty regarding the actual impact of NG on soil and plant systems, suggested considerations to address key knowledge gaps are delineated. Further studies are required as a flora build-up of NG can have both environmental influence and consequences on agronomic sustainability and food safety.

Photocatalytic and adsorptive performance of polyvinyl alcohol/chitosan/TiO2 composite for antibiotics removal: single- and multi-pollutant conditions

A polymer-TiO₂ macro composite (i.e., PVA-CS-TiO₂) was synthesized via chemical precipitation of PVA-CS-TiO₂ blend in alkali/solvent medium and applied for the removal of three model antibiotics (i.e., metronidazole (MNZ), ceftiofur (CEF) and tetracycline (TET)), as single compound and multi-compound conditions. The photocatalytic and adsorptive removals of antibiotics (concentrations of 0.1, 1 and 10 mg L^-1) by the composite in an UV reactor system (32 W UV-C power, 0.3 g L^-1 of composite) was assessed through kinetic models. Antibiotics adsorption followed pseudo-second-order kinetics, and the order of adsorption was MNZ > TET > CEF. On the other hand, the hydrophilic MNZ was degraded faster compared to hydrophobic CEF and TET drugs. Moreover, UV reactor system exhibited antagonistic behavior under multi-compound condition. Micro-toxicity of antibiotics was performed using bioluminescent bacterium Vibrio fischeri and EC₅₀ of CEF, TET and MNZ were found to be 18.25 mg L^-1, 173.8 mg L^-1, and 668.6 mg L^-1, respectively. However, the relative toxicity levels of PVA-CS-TiO₂ and treated effluent were well with the limits as inferred from the microtoxicity analysis. Thus, synthesized biocompatible composite exhibited structural stability, consistent performance for three photocatalytic cycles for all antibiotics at a minimal catalyst loading, easily retained using metallic tea strainer and does not exhibit microtoxicity has a scope for real-time applications.

Enhanced disinfection of E. faecalis and levofloxacin antibiotic degradation using tridoped B-Ce-Ag TiO2 photocatalysts synthesized by ecofriendly citrate EDTA complexing method

Since its use for photochemical water splitting reported first in 1972, TiO₂ is one of the most extensively studied photocatalysts for a diverse range of applications. Monodoping or codoping of the catalyst is a proven strategy to enhance the functionality of TiO₂ under solar or visible light. However, the use of three or more dopants in the development of more efficient and visible light active photocatalysts has not been investigated widely, especially for microbial disinfection. Boron/cerium/silver tridoped TiO₂ photocatalysts with curated amounts of the dopants (B = 1, 2 at.%, Ce = 0.1 at.%, Ag = 0.06 at.%), synthesized by the ecofriendly EDTA-citrate method, were evaluated for the disinfection of water using Enterococcus faecalis under UV-A irradiation and degradation of levofloxacin antibiotic under solar light. The catalyst characterization revealed that the spherical nanoparticles had a crystallite size of ~ 13 nm and bandgap energy values of 2.8-2.9 eV. 2B-0.1Ce-0.06Ag-TiO₂ is the best catalyst for microbial disinfection with a log reduction and kinetic rate constant ~ 30 and ~ 4.5 times higher than those values determined for the other codoped or monodoped catalysts, confirming an enhanced performance. Regarding levofloxacin degradation, the best performing catalyst is 1B-0.1Ce-0.06Ag-TiO₂ with degradation of 99% and 83% COD reduction in 100 min. The tridoped photocatalysts are very effective in the inactivation of Enterococcus faecalis, thus solving the problem of antimicrobial resistance in waters containing antibiotic residues.

Photocatalytic Remediation of Harmful Alexandrium minutum Bloom Using Hybrid Chitosan-Modified TiO2 Films in Seawater: A Lab-Based Study

The uncontrolled growth of harmful algal blooms (HABs) can negatively impact the environment and pose threats to human health and aquatic ecosystems. Titanium dioxide (TiO2) is known to be effective in killing harmful algae through flocculation and sedimentation. However, TiO2 in a dispersed form can harm other non-target marine organisms, which has raised concerns by environmentalists and scientists. This research seeks to explore the utility of immobilized titanium oxide as a photocatalyst for mitigation of HABs, where the Alexandrium minutum bloom was used as a model system herein. Chitosan was modified with 0.2 wt.% TiO2 (Chi/TiO2 (x mL; x = 1, 3 and 5 mL) and the corresponding films were prepared via solvent casting method. Scanning electron microscope (SEM) images of the films reveal a highly uneven surface. X-ray diffraction (XRD) analysis indicates the reduction in chitosan crystallinity, where the presence of TiO2 was negligible, in accordance with its dispersion within the chitosan matrix. The photocatalytic mitigation of A.minutum was carried out via a physical approach in a laboratory-scale setting. The negative surface charge of the films was observed to repel the negatively charged A.minutum causing fluctuation in the removal efficiency (RE). The highest RE (76.1 ± 13.8%) was obtained when Chi/TiO2 (1 mL) was used at 72 h, where the hydroxyl radicals generated were inferred to contribute to the deactivation of the algae cells by causing oxidative stress. An outcome of this study indicates that such hybrid films have the potential to replace the non-immobilized (dispersed) TiO2 for HAB mitigation. However, further investigation is required to deploy these films for field applications at a larger scale.

Photocatalytic reactor design and its application in real wastewater treatment using TiO2 coated on the stainless-steel mesh

The application of wastewater treatment using TiO₂ coated on the stainless-steel mesh is promising for disintegrating organic pollutants in wastewater. This research successfully coated TiO₂ particles on stainless-steel mesh for the photocatalyst process by using the dip-coating method. This method was selected due to its simplicity and low cost, as well as its extensive application prospects in wastewater treatment. The photocatalytic oxidation of real wastewater treatment was developed and designed for a photo-reactor in terms of flow rate (varied on 2.0-4.0 L/min) and light distance (varied on 5.0-15.0 cm), whereas the preparation of the material process was investigated in terms of TiO₂ catalyst dosage (varied on 1.0-3.0 g) and layers of coating (varied on 1 to 3 layers). Experiments were employed to degrade organic wastewater from methylene blue (MB) for a prelim experiment and real wastewater effluent testing for the application. The optimized TiO₂ dosage was 2.0 g with 2 layers of coating coated on the stainless-steel mesh. The designed photo-reactor was optimized with a flow rate of 2.0 L/min and a light distance of 10.0 cm to treat the organic pollutants in raw domestic wastewater effluent on photocatalytic activity. MB successfully degraded about 96% in 3 h under UV-C irradiation after adsorption equilibrium was completed (3 h), whereas the efficiency of BOD removal was 89% under UV-C irradiation in 4 h. Therefore, TiO₂ (2.0 g) coated on stainless-steel mesh with 2 layers of the coating prepared by dip-coating is a potentially effective alternative for real wastewater treatment.

ZrO2-Ag2O nanocomposites encrusted porous polymer monoliths as high-performance visible light photocatalysts for the fast degradation of pharmaceutical pollutants

This work reports a unique ZrO₂-Ag₂O heterojunction nanocomposite uniformly dispersed on a macro-/meso-porous polymer monolithic template to serve as simple and effective visible light-driven heterogeneous plasmonic photocatalysts for water decontamination. The monolithic photocatalysts' structural properties and surface morphology are characterized using various surface and structural characterization techniques. The photocatalytic performance of the proposed photocatalysts is evaluated by optimizing multiple operational parameters. The photocatalytic properties of the fabricated monolithic nanocomposite are monitored through time-dependent photocatalytic disintegration of norfloxacin drug, a widely employed antimicrobial, with considerable aquatic persistence. The analytical results conclude that a (60:40) ZrO₂-Ag₂O nanocomposite embedded polymer monolith exhibits superior photocatalytic activity for the complete mineralization of norfloxacin molecules under optimized conditions of solution pH (3.0), photocatalyst quantity (100 mg), pollutant concentration (15 mg/L), photosensitizers (2.0 mM KBrO₃), visible light intensity (300 W/cm² tungsten lamp) and irradiation time (≤ 1 h). The proposed new-age inorganic-organic hybrid visible light photo-catalysts with superior structural and surface properties exhibit brilliant performance and fast responsiveness for water decontamination applications, in addition to their excellent chemical stability, high durability, multi-reusability, and cost-effectiveness.

Detecting Pb2+by a 'turn-on' fluorescence sensor based on DNA functionalized magnetic nanocomposites

Sensitive and selective detection of the lead ion (Pb²⁺) plays an important role in terms of both human health and environmental protection, as the heavy metal is fairly ubiquitous and highly toxic. The highly stable fluorescence biosensor is composed of Fe₃O₄@TiO₂core-shell nanocomposites, functionalized with a carboxyl fluorescein labeled DNA. The morphology, physical and chemical properties of the sensing nanomaterials were studied by transmission electron microscopy, FT-IR spectroscopy (FT-IR), x-ray powder diffraction and vibrating sample magnetometer. UV-visible and fluorescence spectroscopy were used to characterize the fluorescein functionalized magnetic nanoparticles. The performance of Pb²⁺detection displayed an excellent linearity (R² = 0.995) in the range of 10^-10to 5 × 10^-9ppm with a detection limit of 10^-10ppm, based on the optimization of the fabrication process and aptamers' specification. The fluorescence biosensor has an accurate response, excellent recoveries and high adsorbent capacities. It was successfully applied for the determination of Pb²⁺in contaminated water and serum samples; the detection of limit in both media were 10^-10ppm. These features ensure the potential use of aptamer functionalized magnetic nanocomposites as a new class of non-toxic biocompatible sensors for biological and environmental applications.

Facile synthesis of ZnO/CuO/Ag2O ternary metal oxide nanocomposite for effective photodegradation of organic water pollutants

The current study is focused on fabrication of a ternary metal oxide nanocomposite (ZnO/CuO/Ag₂O) as an efficient and superior photocatalyst by step-wise implanting of p-type CuO and Ag₂O semiconductors onto an n-type semiconductor (ZnO) via a chemical method. The structural and textural characteristics of the manufactured samples were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy combined with electron dispersive spectroscopy (FESEM-EDS) and UV-visible spectroscopy. The photocatalytic performance of the fabricated ternary nanocomposite was tested against the photocatalytic degradation of crystal violet (CV) and rhodamine B (RhB) organic dyes under solar light irradiation. The ternary nanocomposite demonstrated about 99.05% and 97.38% degradation efficiency toward CV and RhB dyes under solar light irradiation in a time period of 105 min. The calculated rate constants (k, min^-1) for degradation under solar light over the ZnO/CuO/Ag₂O nanocomposite were 4.26 and 3.61 times higher than the k value obtained over ZnO nanoparticles for CV and RhB dyes, respectively. The main reactive species taking part in the photodegradation processes were •OH and ^•O₂^- over ZnO/CuO/Ag₂O photocatalysts under solar light illumination. Furthermore, the recycle experiments confirmed good reusability and photo-stability of the ZnO/CuO/Ag₂O ternary nanocomposite.

TiO2/Ag2O immobilized on cellulose paper: A new floating system for enhanced photocatalytic and antibacterial activities

Paper-TiO₂-Ag₂O floating photocatalysts were produced under mild condition and their photocatalytic activity for the degradation of aromatic amine under sunlight stimulant was investigated. Characterizations by Raman, XRD, XPS, DRS and PL confirmed the presence of TiO₂ and Ag₂O, and the morphology of the appended TiO₂/Ag₂O layer was probed by FE-SEM. The photocatalytic activity of the prepared samples was investigated by the degradation of aniline (AN) in water under simulated sun-light illumination and constrained conditions, i.e. non-stirring and non-oxygenation. The presence of Ag₂O combined with TiO₂ was shown to improve the resistance of paper to bacteria attack, thus increasing the durability of the photocatalyst. Thanks to its hydrophobic character, the paper-TiO₂-Ag₂O NPs can be employed as useful floating photocatalyst and can be reused in continuous cycles.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Visible-Light Active Titanium Dioxide Nanomaterials with Bactericidal Properties

This article provides an overview of current research into the development, synthesis, photocatalytic bacterial activity, biocompatibility and cytotoxic properties of various visible-light active titanium dioxide (TiO2) nanoparticles (NPs) and their nanocomposites. To achieve antibacterial inactivation under visible light, TiO2 NPs are doped with metal and non-metal elements, modified with carbonaceous nanomaterials, and coupled with other metal oxide semiconductors. Transition metals introduce a localized d-electron state just below the conduction band of TiO2 NPs, thereby narrowing the bandgap and causing a red shift of the optical absorption edge into the visible region. Silver nanoparticles of doped TiO2 NPs experience surface plasmon resonance under visible light excitation, leading to the injection of hot electrons into the conduction band of TiO2 NPs to generate reactive oxygen species (ROS) for bacterial killing. The modification of TiO2 NPs with carbon nanotubes and graphene sheets also achieve the efficient creation of ROS under visible light irradiation. Furthermore, titanium-based alloy implants in orthopedics with enhanced antibacterial activity and biocompatibility can be achieved by forming a surface layer of Ag-doped titania nanotubes. By incorporating TiO2 NPs and Cu-doped TiO2 NPs into chitosan or the textile matrix, the resulting polymer nanocomposites exhibit excellent antimicrobial properties that can have applications as fruit/food wrapping films, self-cleaning fabrics, medical scaffolds and wound dressings. Considering the possible use of visible-light active TiO2 nanomaterials for various applications, their toxicity impact on the environment and public health is also addressed.

Dip-coating decoration of Ag2O nanoparticles on SnO2 nanowires for high-performance H2S gas sensors

SnO₂ nanowires (NWs) are used in gas sensors, but their response to highly toxic gas H₂S is low. Thus, their performance toward the effective detection of low-level H₂S in air should be improved for environmental-pollution control and monitoring. Herein, Ag₂O nanoparticle decorated SnO₂ NWs were prepared by a simple on-chip growth and subsequent dip-coating method. The amount of decorated Ag₂O nanoparticles on the surface of SnO₂ NWs was modified by changing the concentration of AgNO₃ solution and/or dipping times. Gas-sensing measurements were conducted at various working temperatures (200–400 °C) toward different H₂S concentrations ranging within 0.1–1 ppm. The selectivity of Ag₂O-decorated SnO₂ NW sensors for ammonia and hydrogen gases was tested. Results confirmed that the Ag₂O-decorated SnO₂ NW sensors had excellent response, selectivity, and reproducibility. The gas-sensing mechanism was interpreted under the light of energy-band bending by sulfurization, which converted the p–n junction into n–n, thereby significantly enhancing the sensing performance.

Ag₂O nanoparticles decorated on the surface of on-chip growth SnO₂ nanowires by a dip-coating method possessed excellent sensing performance for H₂S gas.

Ag/Ag2O as a Co-Catalyst in TiO2 Photocatalysis: Effect of the Co-Catalyst/Photocatalyst Mass Ratio

Mixtures and composites of Ag/Ag2O and TiO2 (P25) with varying mass ratios of Ag/Ag2O were prepared, employing two methods. Mechanical mixtures (TM) were obtained by the sonication of a suspension containing TiO2 and Ag/Ag2O. Composites (TC) were prepared by a precipitation method employing TiO2 and AgNO3. Powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) confirmed the presence of Ag(0) and Ag2O. The activity of the materials was determined employing methylene blue (MB) as the probe compound. Bleaching of MB was observed in the presence of all materials. The bleaching rate was found to increase with increasing amounts of TiO2 under UV/vis light. In contrast, the MB bleaching rate decreased with increasing TiO2 content upon visible light illumination. XRD and XPS data indicate that Ag2O acts as an electron acceptor in the light-induced reaction of MB and is transformed by reduction of Ag+, yielding Ag(0). As a second light-induced reaction, the evolution of molecular hydrogen from aqueous methanol was investigated. Significant H2 evolution rates were only determined in the presence of materials containing more than 50 mass% of TiO2. The experimental results suggest that Ag/Ag2O is not stable under the experimental conditions. Therefore, to address Ag/Ag2O as a (photo)catalytically active material does not seem appropriate.