Plasmonic Dual-Gap Nanodumbbells for Label-Free On-Particle Raman DNA Assays

Metal nanostructures with a tunable plasmonic gap are useful for photonics, surface-enhanced spectroscopy, biosensing, and bioimaging applications. The use of these structures as chemical and biological sensing/imaging probes typically requires an ultra-precise synthesis of the targeted nanostructure in a high yield, with Raman dye-labeling and complex assay components and procedures. Here, a plasmonic nanostructure with tunable dual nanogaps, Au dual-gap nanodumbbells (AuDGNs), is designed and synthesized via the anisotropic adsorption of polyethyleneimine on Au nanorods to facilitate tip-selective Au growths on nanorod tips for forming mushroom-shaped dumbbell-head structures at both tips and results in dual gaps (intra-head and inter-head gaps) within a single particle. AuDGNs are synthesized in a high yield (>90%) while controlling the inter-head gap size, and the average surface-enhanced Raman scattering (SERS) enhancement factor (EF) value is 7.5 × 10⁸ with a very narrow EF distribution from 1.5 × 10⁸ to 1.5 × 10⁹ for >90% of analyzed particles. Importantly, AuDGNs enable label-free on-particle SERS detection assays through the diffusion of target molecules into the intraparticle gap for different DNA sequences with varying ATGC combinations in a highly specific and sensitive manner without a need for Raman dyes.

Plasmonic surface-enhanced Raman scattering nano-substrates for detection of anionic environmental contaminants: Current progress and future perspectives

Surface-enhanced Raman scattering spectroscopy (SERS) is a powerful technique of vibrational spectroscopy based on the inelastic scattering of incident photons by molecular species. It has unique properties such as ultra-sensitivity, selectivity, non-destructivity, speed, and fingerprinting properties for analytical and sensing applications. This enables SERS to be widely used in real-world sample analysis and basic plasmonic mechanistic studies. However, the desirable properties of SERS are compromised by the high cost and low reproducibility of the signals. The development of multifunctional, stable and reusable nano-engineered SERS substrates is a viable solution to circumvent these drawbacks. Recently, plasmonic SERS active nano-substrates with various morphologies have attracted the attention of researchers due to promising properties such as the formation of dense hot spots, additional stability, tunable and controlled morphology, and surface functionalization. This comprehensive review focused on the current advances in the field of SERS active nanosubstrates suitable for the detection and quantification of anionic environmental pollutants. The common fabrication methods, including the techniques for morphological adjustments and surface modification, substrate categories, and the design of nanotechnologically fabricated plasmonic SERS substrates for anion detection are systematically presented. Here, the need for the design, synthesis, and functionalization of SERS nano-substrates for anions of great environmental importance is explained in detail. In addition, the broad categories of SERS nano-substrates, namely colloid-based SERS substrates and solid-support SERS substrates are discussed. Moreover, a brief discussion of SERS detection of certain anionic pollutants in the environment is presented. Finally, the prospects in the fabrication and commercialization of pilot-scale handheld SERS sensors and the construction of smart nanosubstrates integrated with novel amplifying materials for the detection of anions of environmental and health concern are proposed.

Silver Nanoparticle-Decorated Silica Nanospheres and Arrays as Potential Substrates for Surface-Enhanced Raman Scattering

Poly(vinylpyrrolidone) (PVP) was used as both a modifier and reductant to in situ deposit silver nanoparticles (denoted Ag NPs) on the surface of silica nanospheres (nanosilica or nano-SiO₂), affording Ag-decorated nanosilica (denoted SiO₂@Ag). The as-obtained SiO₂@Ag composite can form silver nanoparticle-decorated silica nanosphere arrays (denoted SiO₂@Ag arrays) via evaporation-induced self-assembly. The as-prepared SiO₂@Ag composite and SiO₂@Ag array were used as the SERS substrates to measure the Raman signals of the dilute solutions of rhodamine 6G (denoted R6G), an organic dye that is a potential pollutant to the environment. The findings indicate that the as-prepared SiO₂@Ag composite and SiO₂@Ag array as potential SERS substrates simultaneously exhibit a high degree of metal coverage and small size of Ag NPs as well as good stability and abundant "hot spots", which contributes to their desired Raman enhancement capacities. For the detection of trace R6G, they provide a limit of detection of as low as 10^-9-10^-11 M as well as good reproducibility, showing promising potential for monitoring chemical and biological molecules.

Facile synthesis of Ag@C@Ag hybrid nanoparticles as SERS substrate

Ag@C core-shell nanoparticles (NPs) were first prepared by a low-temperature heating-stirring method and subsequently modified with polyethyleneimine (PEI) at different concentrations. Finally, Ag@C@Ag hybrid NPs were prepared by a simple self-assembly procedure, and 24-nm Ag NPs were attached onto the surface of the initially fabricated PEI-modified Ag@C NPs via interaction between the NH₂ groups of PEI and Ag. The results demonstrated that rhodamine 6G (R6G) could be detected at a concentration as low as 10^-10 M using the Ag@C@Ag NPs as a substrate. To further understand the signal enhancement mechanism, finite-difference time-domain (FDTD) simulations were performed to calculate the electromagnetic field distributions and illustrate the generated Raman hot spots. The FDTD indicated that this enhancement was attributed to the surface plasmon resonance effects of the core Ag NPs in the Ag@C NPs, hot spots between the Ag@C NPs, and external assembly of the 24-nm Ag NPs, as well as between the massive outlayer 24-nm Ag NPs themselves. These fabricated materials were further applied for the detection of folic acid as an actual sample. The outstanding performance of the Ag@C@Ag NPs can be attributed to both the excellent properties of this hybrid substrate and the absorption capability of the carbon layer. Thus, this Ag@C@Ag NP material demonstrates excellent and stable optical properties, and can be used as a surface-enhanced Raman scattering (SERS) substrate in the field of ultrasensitive spectral analysis. Graphical abstract Ag@C@Ag hybrid nanoparticles are prepared by a simple self-assembly method. Then the synthesized Ag@C@Ag hybrid nanoparticles are used as SERS substrate for folic acid detection. To further understand the signal enhancement mechanism, finite-difference time-domain simulations are performed to calculate the electromagnetic field distributions and illustrate the generated SERS hot spots.

Dual-signal lateral flow assay using vancomycin-modified nanotags for rapid and sensitive detection of Staphylococcus aureus

This paper reports a colorimetric-fluorescent dual-signal lateral flow assay (LFA) based on vancomycin (Van)-modified SiO2-Au-QD tags for sensitive and quantitative detection of Staphylococcus aureus (S. aureus). The combination of high-performance Van-tags and detection antibodies integrated into the LFA system produced assays with high sensitivity and specificity. The visualization limit of the colorimetric signal and the detection limit of the fluorescence signal of the proposed method for S. aureus can reach 104 and 100 cells mL-1, respectively.

Development of a SERS-based lateral flow immunoassay for rapid and ultra-sensitive detection of anti-SARS-CoV-2 IgM/IgG in clinical samples

The accurate and rapid screening of serum antibodies against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the key to control the spread of 2019 coronavirus disease (COVID-19). In this study, we reported a surface-enhanced Raman scattering-based lateral flow immunoassay (SERS-LFIA) for the simultaneous detection of anti-SARS-CoV-2 IgM/IgG with high sensitivity. Novel SERS tags labeled with dual layers of Raman dye were fabricated by coating a complete Ag shell on SiO₂ core (SiO₂@Ag) and exhibited excellent SERS signals, good monodispersity, and high stability. Anti-human IgM and IgG were immobilized onto the two test lines of the strip to capture the formed SiO₂@Ag-spike (S) protein-anti-SARS-CoV-2 IgM/IgG immunocomplexes. The SERS signal intensities of the IgM and IgG test zones were easily recorded by a portable Raman instrument and used for the high-sensitivity analysis of target IgM and IgG. The limit of detection of SERS-LFIA was 800 times higher than that of standard Au nanoparticle-based LFIA for target IgM and IgG. The SERS-LFIA biosensor was tested on 19 positive serum samples from COVID-19 patients and 49 negative serum samples from healthy people to demonstrate the clinical feasibility of our proposed assay. The results revealed that the proposed method exhibited high accuracy and specificity for patients with SARS-CoV-2 infection.

Rapid, Quantitative, High-Sensitive Detection of Escherichia coli O157:H7 by Gold-Shell Silica-Core Nanospheres-Based Surface-Enhanced Raman Scattering Lateral Flow Immunoassay

Escherichia coli O157:H7 is regarded as one of the most harmful pathogenic microorganisms related to foodborne diseases. This paper proposes a rapid-detection biosensor for the sensitive and quantitative analysis of E. coli O157:H7 in biological samples by surface-enhanced Raman scattering (SERS)-based lateral flow immunoassay (LFIA). A novel gold-shell silica-core (SiO2/Au) nanosphere (NP) with monodispersity, good stability, and excellent SERS activity was utilized to prepare high-performance tags for the SERS-based LFIA system. The SiO2/Au SERS tags, which were modified with two layers of Raman reporter molecules and monoclonal antibodies, effectively bind with E. coli O157:H7 and form sandwich immune complexes on the test lines. E. coli O157:H7 was quantitatively detected easily by detecting the Raman intensity of the test lines. Under optimal conditions, the limit of detection (LOD) of the SiO2/Au-based SERS-LIFA strips for the target bacteria was 50 cells/mL in PBS solution, indicating these strips are 2,000 times more sensitive than colloidal Au-based LFIA strips. Moreover, the proposed assay demonstrated high applicability in E. coli O157:H7 detection in biological samples, including tap water, milk, human urine, lettuce extract and beef, with a low LOD of 100 cells/mL. Results indicate that the proposed SERS-based LFIA strip is applicable for the sensitive and quantitative determination of E. coli O157:H7.

Multiple Roles of Polyethylenimine during Synthesis of 10 nm Thick Continuous Silver Nanoshells

Silica@silver core-shell particles (silver nanoshells) present a wide range of applications, owing to their unique optical, chemical, and surface plasmon resonance (SPR) properties. Because SPR properties are mainly determined by shell thickness, precise shell thickness control is required. However, the synthesis of continuous nanoshells less than 10 nm thickness is still a challenge. In this study, we overcame this challenge by using polyethyleneimine (PEI) during the shell growth step of the seed-mediated growth method. We determined that the addition of PEI significantly slowed the shell growth reaction and facilitated the formation of uniform shells, which allowed us to synthesize 9.8 nm thick complete silver nanoshells. The SPR absorptions of the resultant nanoshell suspensions remained almost unchanged for 15 days. Therefore, we demonstrated that PEI molecules played three different roles during the shell growth process: reaction-rate regulators, shell growth facilitators, and resultant suspension stabilizers. The shell thickness was tuned from 9.8 to 29.5 nm by simply varying the silver-ion concentration. A key factor was the amount of added PEI because excess PEI would result in the formation of silver nanoparticles in the bulk solution phase, while too little PEI would produce incomplete shells. The optimum mass ratio of PEI-to-silica particles was determined to be 1.0 for the experimental conditions in this study. The mixing sequence of the reaction solutions was also important because PEI had to be mixed with silica particles first to ensure that the PEI molecules get adsorbed on the surface of silica and accommodated silver ions via the coordination interactions between the amine groups of the PEI molecules and silver ions. The reaction that involves the use of PEI could lead to establishing a simple and robust synthesis technique for silver nanoshells.

Polyethyleneimine-interlayered silica-core quantum dot-shell nanocomposites for sensitive detection of Salmonella typhimurium via a lateral flow immunoassay

Herein, we synthesized high-performance SiO₂–core quantum dot (QD)–shell nanocomposites (SiO₂@PEI-QDs) using the polyethyleneimine (PEI)-mediated adsorption method. Cationic PEI was used to form a positively charged interlayer on the SiO₂ core, which achieved a dense adsorption of carboxylated QDs to form a shell of QDs and maintained a good dispersibility of the nanocomposite. The SiO₂@PEI-QDs showed excellent stability and high luminescence, and served as high-performance fluorescent labels for the detection of bacteria when used with the lateral flow immunoassay (LFA) technique. An SiO₂@PEI-QD-based LFA strip was successfully applied to rapidly detect Salmonella typhimurium in milk samples with a low limit of 5 × 10² cells per mL.

A novel type of SiO₂-core QDs-shell nanomaterial was fabricated and utilized to prepare bright fluorescent nanotags for fluorescent lateral flow strip.

Rapid identification and antibiotic susceptibility test of pathogens in blood based on magnetic separation and surface-enhanced Raman scattering

An effective surface-enhanced Raman scattering (SERS) method is presented for the rapid identification and drug sensitivity analysis of pathogens in blood. In a first step, polyethyleneimine-modified magnetic microspheres (Fe₃O₄@PEI) were used to enrich bacteria from blood samples. Next, the Fe₃O₄@PEI@bacteria complex was cultured on both ordinary and drug-sensitive plates. Lastly, the SERS spectra of single colonies were acquired in order to identify different pathogens and their resistant strains by comparison with established standardized bacterial SERS spectras and orthogonal partial least squares discriminant analysis (OPLS-DA) method. Staphylococcus aureus, Acinetobacter baumannii, Pseudomonas aeruginosa and their resistant strains were used to evaluate the performance of the SERS method. The results demonstrate that the method can accurately detect and identify all the tested sensitive and drug-resistant strains of bacteria, including 77 clinical blood infection samples. The method provides a way for rapid identification and susceptibility test of pathogens, and has great potential to replace currently used time-consuming methods. Graphical abstract Schematic presentation of a method for the rapid identification and drug sensitivity analysis of pathogens in blood. It is based on a combination of magnetic separation, SERS fingerprint analysis and orthogonal partial least squares discriminant analysis (OPLS-DA).

APTES Duality and Nanopore Seed Regulation in Homogeneous and Nanoscale-Controlled Reduction of Ag Shell on SiO2 Microparticle for Quantifiable Single Particle SERS

Noble-metal nanoparticles size and packing density are critical for sensitive surface-enhanced Raman scattering (SERS) and controlled preparation of such films required to achieve reproducibility. Provided that they are made reliable, Ag shell on SiO₂ microscopic particles (Ag/SiO₂) are promising candidates for lab-on-a-bead analytical measurements of low analyte concentration in liquid specimen. Here, we selected nanoporous silica microparticles as a substrate for reduction of AgNO₃ with 3-aminopropyltriethoxysilane (APTES). In a single preparation step, homogeneous and continuous films of Ag nanoparticles are formed on SiO₂ surfaces with equimolar concentration of APTES and silver nitrate in ethanol. It is discussed that amine and silane moieties in APTES contribute first to an efficient reduction on the silica and second to capping the Ag nanoparticles. The high density and homogeneity of nanoparticle nucleation is further regulated by the nanoporosity of the silica. The Ag/SiO₂ microparticles were tested for SERS using self-assembled 4-aminothiophenol monolayers, and an enhancement factor of ca. 2 × 10⁶ is measured. Importantly, the SERS relative standard deviation is 36% when a single microparticle is considered and drops to 11% when sets of 10 microparticles are considered. As prepared, the microparticles are highly suitable for state-of-the-art quantitative lab-on-a-bead interrogation of specimens.

SERS active Ag-SiO2 nanoparticles obtained by laser ablation of silver in colloidal silica

Highly stable Ag-SiO₂ nanoparticle composites were first obtained by laser ablation of a silver target in an aqueous colloidal dispersion of silica and examined by UV-vis absorption spectroscopy, transmission electron microscopy and Raman spectroscopy. The surface enhanced Raman scattering (SERS) activity of these nanocomposites was tested using 2,2'-bipyridine as a molecular reporter and excitation in the visible and near-IR spectral regions. The computational DFT approach provided evidence of ligand adsorption on positively charged adatoms of the silver nanostructured surface, in a very similar way to the metal/molecule interaction occurring in the corresponding Ag(I) coordination compound.

Dual dye-loaded Au@Ag coupled to a lateral flow immunoassay for the accurate and sensitive detection of Mycoplasma pneumoniae infection

We present an attractive model of surface-enhanced Raman scattering-based lateral flow immunoassay (SERS-LFIA) for the sensitive and accurate detection of Mycoplasma pneumoniae (MP) infection in human serum. The SERS-LFIA strip uses Au@Ag nanoparticles (Au@Ag NPs) loaded with two layers of Raman dye 5,5′-dithiobis-(2-nitrobenzoic acid) (DTNB) as SERS tags. The advantages of the dual dye-loaded SERS tags (Au/DTNB@Ag/DTNB) are the high sensitivity and the bioconjugation flexibility of the detection antibody. As determined from our SERS-LFIA strip, human IgM was quantified by monitoring the SERS signal on the test line. The limit of detection for human IgM was 0.1 ng mL⁻¹, which was 100 times more sensitive than that by using the colorimetric method. Our assay results for 20 MP-specific IgM positive serum specimens showed 100% accuracy and detection rate, whereas the parallel enzyme-linked immunosorbent assay only showed 85% detection rate. The SERS-LFIA strip also exhibited high specificity and potential clinical applications. Therefore, our SERS-based LFIA strip has strong potential for practical applications in the sensitive and rapid detection of MP.

Schematic illustration of quantitative detection of human IgM using SERS-based lateral flow immunoassay.

Facile synthesis of high-performance SiO2@Au core–shell nanoparticles with high SERS activity

This study proposes a facile and general method for fabricating a wide range of high-performance SiO₂@Au core–shell nanoparticles (NPs).