Tunable and highly efficient light-harvesting antenna systems based on 1,7-perylene-3,4,9,10-tetracarboxylic acid derivatives

Modulation of the Excited States of Ruthenium(II)-perylene Dyad to Access Near-IR Luminescence, Long-Lived Perylene Triplet State and Singlet Oxygen Photosensitization

Herein, we present a novel ruthenium(II)-perylene dyad (RuPDI-Py) that combines the photophysical properties of pyrrolidine-substituted perylene diimide (PDI-Py) and the ruthenium(II) polypyridine complex [Ru(phen)3]2+. A comprehensive study of excited-state dynamics was carried out using time-resolved and steady-state methods in a dimethyl sulfoxide solution. The RuPDI-Py dyad demonstrated excitation wavelength-dependent photophysical behavior. Upon photoexcitation above 600 nm, the dyad exclusively exhibits the near-infrared (NIR) fluorescence of the 1PDI-Py state at 785 nm (τfl = 1.50 ns). In contrast, upon photoexcitation between 350 and 450 nm, the dyad also exhibits a photoinduced electron transfer from the {[Ru(phen)3]2+} moiety to PDI-Py, generating the charge-separated intermediate state {Ru(III)-(PDI-Py)•-} (4 μs). This state subsequently decays to the long-lived triplet excited state 3PDI-Py (36 μs), which is able to sensitize singlet oxygen (1O2). Overall, tuning 1O2 photoactivation or NIR fluorescence makes RuPDI-Py a promising candidate for using absorbed light energy to perform the desired functions in theranostic applications.

Solvent-induced structural transformation in a one-dimensional coordination polymer

We have rationally designed a one-dimensional coordination polymer (1D CP), termed 1D-DGIST-18, that exhibits intrinsic structural flexibility. This 1D CP enables its expansion into a three-dimensional network through supramolecular interactions involving coordinated solvents and/or ligands. The strategic selection of solvents for solvent exchange, prior to drying, significantly influences the structures of 1D-DGIST-18 by removing certain coordinating solvents and modulating π-π stacking. Consequently, a hierarchical porosity emerges, ranging from micro- to meso- to macroporous structures, which is attributed to its inherent structural dynamics. Additionally, the formation of excimers endows 1D-DGIST-18, when immersed in acetone, with 'turn-on' fluorescence, as evidenced by fluorescence decay profiles. These structural transitions within 1D-DGIST-18 are further elucidated using single-crystal X-ray diffractometry. The insights from this study provide a foundation for the design of materials with structural dynamics and tunable properties.

Fast Charge Separation in Distant Donor-Acceptor Dyads Driven by Relaxation of a Hot Excited State

A series of three perylenemonoimide-p-oligophenylene-dimethylaniline molecular dyads undergo photoinduced charge separation (CS) with anomalous distance dependence as a function of increasing donor-acceptor (DA) distances. A comprehensive experimental and computational investigation of the photodynamics in the donor-bridge-acceptor (DBA) chromophores reveals a clear demarcation concerning the nature of the CS accessed at shorter (bridgeless) and longer DA distances. At the shortest distance, a strong DA interaction and ground-state charge delocalization populate a hot excited state (ES) with prominent charge transfer (CT) character, via Franck-Condon vertical excitation. The presence of such a CT-polarized hot ES enables a subpicosecond CS in the bridgeless dyad. The incorporation of the p-oligophenylene bridge effectively decouples the donor and the acceptor units in the ground state and consequentially suppresses the CT polarization in the hot ES. Theoretically, this should render a slower CS at longer distances. However, the transient absorption measurement reveals a fast CS process at the longer distance, contrary to the anticipated exponential distance dependence of the CS rates. A closer look into the excited-state dynamics suggests that the hot ES undergoes ultrafast geometry relaxation (τ < 1 ps) to create a relaxed ES. As compared to a decoupled, twisted geometry in the hot ES, the geometry of the relaxed ES exhibits a more planar conformation of the p-oligophenylene bridges. Planarization of the bridge endorses an increased charge delocalization and a prominent CT character in the relaxed ES and forms the origin for the evident fast CS at the longest distance. Thus, the relaxation of the hot ES and the concomitantly enhanced charge delocalization adds a new caveat to the classic nature of distance-dependent CS in artificial DBA chromophores and recommends a cautious treatment of the attenuation factor (β) while discussing anomalous CS trends.

Symmetry-breaking charge separation in a nitrogen-bridged naphthalene monoimide dimer

The photophysical properties of 4-aminonaphthalene-1,8-imide-based derivatives, bis-ANI, consisting of two naphthalimide (NI) units linked by a butylamine bridge and its monomer ANI have been intensively investigated by steady-state and transient spectroscopy combined with quantum chemical calculations. The excited state relaxation dynamics of the two molecules are studied in three solvents of varying polarity - from hexane to tetrahydrofuran to acetone. A strong reduction in the fluorescence quantum yields and larger red shifts of the emission spectra are observed when going from the monomer ANI to dimer bis-ANI with increasing solvent polarity. It is found that the presence of the central amino linker in bis-ANI facilitates the formation of an asymmetric CS state between the ANI and NI moieties in bis-ANI, where NI˙^- is the dominant radical anion unit after CS, evidenced by the femtosecond transient absorption measurements and spectroelectrochemistry in polar solvents. Femtosecond transient absorption spectra and quantum chemical calculations reveal the conformational change after the formation of the symmetry-breaking charge separation (SBCS) state upon photoexcitation, while a near-orthogonal structure in the excited state of bis-ANI retards charge recombination. In addition, it is evidenced that the rate of SBCS can be tuned by changing the different polar solvents.

Room temperature synthesis of perylene diimides facilitated by high amic acid solubility

A novel protocol for the synthesis of perylene diimides (PDIs), by reacting perylene dianhydride (PDA) with aliphatic amines is reported. Full conversions were obtained at temperatures between 20 and 60 °C, using DBU as the base in DMF or DMSO. A “green” synthesis of PDIs, that runs at higher temperatures, was developed using K₂CO₃ in DMSO. The reaction sequence for the imidization process, via perylene amic acid intermediates (PAAs), has been confirmed experimentally aided by the synthesis and full characterization of stable model amic acid salts and amic esters. Kinetic studies, using absorption spectroscopy, have established that PDI formation proceeds via fast amic acid formation, followed by a slow conversion to imides. Solubility of the intermediate PAA salts is found to be low and rate-limiting. Based on this finding, quantitative PDI synthesis at room temperature was achieved by diluting the reaction mixture with water, the solvent in which PAA salts have better solubility. Thus, the otherwise harsh synthesis of PDIs has been transformed into an extremely convenient functional group tolerant and highly efficient reaction that runs at room temperature.

Perylene diimides (PDIs) are synthesised at room temperature and obtained in quantitative yields after a single filtration. High solubility of the intermediate amic acid salts 5 and 9 is key to the success of this novel synthesis.

A supramolecular dual-donor artificial light-harvesting system with efficient visible light-harvesting capacity

A supramolecular dual-donor artificial light-harvesting system with efficient visible light-harvesting capacity was constructed through the hierarchical self-assembly approach.

Directing charge transfer in perylene based light-harvesting antenna molecules

Directing energy and charge transfer processes in light-harvesting antenna systems is quintessential for optimizing the efficiency of molecular devices for artificial photosynthesis. In this work, we report a novel synthetic method to construct two regioisomeric antenna molecules (1-D2A2 and 7-D2A2), in which the 4-(n-butylamino)naphthalene monoimide energy and electron donor is attached to the perylene monoimide diester (PMIDE) acceptor at the 1- and 7-bay positions, respectively. The non-symmetric structure of PMIDE renders a polarized distribution of the frontier molecular orbitals along the long axis of this acceptor moiety, which differentiates the electron coupling between the donor, attached at either the 1- or the 7-position, and the acceptor. We demonstrate that directional control of the photo-driven charge transfer process has been obtained by engineering the molecular structure of the light-harvesting antenna molecules.

Arenium cation or radical cation? An insight into the cyclodehydrogenation reaction of 2-substituted binaphthyls mediated by Lewis acids

Perylene and its derivatives are some of the most interesting chromophores in the field of molecular design. One of the most employed methodologies for their synthesis is the cyclodehydrogenation of binaphthyls mediated by Lewis acids. In this article, we investigated the cyclodehydrogenation reaction of 2-substituted binaphthyls to afford the bay-substituted perylene. By using AlCl3 as a Lewis acid and high temperatures (the Scholl reaction), two new products bearing NH2 and N(CH3)2 groups at position 2 of the perylene ring were synthesized. Under these conditions, we were also able to obtain terrylene from ternaphthalene in 38% yield after two cyclodehydrogenation reactions in a single step. The attempts to promote the formation of a radical cation (necessary intermediary for the oxidative aromatic coupling mechanism) by using FeCl3 or a strong oxidant like 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) did not yield the expected products. DFT calculations suggested that the lack of reaction for oxidative aromatic coupling is caused by the difference between the oxidation potentials of the donor/acceptor couple. In the case of the Scholl reaction, the regiochemistry involved in the formation of the σ-complex together with the activation energy of the C-C coupling reaction helped to explain the differences in the reactivity of the different substrates studied.

Efficacious elimination of intramolecular charge transfer in perylene imide based light-harvesting antenna molecules

Two light-harvesting antenna molecules were obtained by positioning naphthalene monoimide energy donors at the imide position, instead of the bay positions, of perylene imide energy acceptors. Such rational design resulted in a complete suppression of parasitic intramolecular charge transfer without compromising the desired ultrafast rates of excitation energy transfer.

Perylene Bisimide Dyes with up to Five Independently Introduced Substituents: Controlling the Functionalization Pattern and Photophysical Properties Using Regiospecific Bay Substitution

We report herein a versatile and user-friendly synthetic methodology based on sequential functionalization that enables the synthesis of previously unknown perylene bisimide (PBI) dyes with up to five different substituents attached to the perylene core (e.g., compound 15). The key to the success of our strategy is a highly efficient regiospecific 7-mono- and 7,12-di-phenoxy bay substitution at the "imide-activated" 7- and 12-bay positions of 1,6,7,12-tetrachloroperylene monoimide diester 1. The facile subsequent conversion of the diester groups into an imide group resulted in novel PBIs (e.g., compound 14) with two phenoxy substituents specifically at the 7- and 12-bay positions. This conversion led to the activation of C-1 and C-6 bay positions, and thereafter, the remaining two chlorine atoms were substituted to obtain tetraphenoxy-PBI (compound 15) that has two different imide and three different bay substituents. The methodology provides excellent control over the functionalization pattern, which enables the synthesis of various regioisomeric pairs bearing the same bay substituents. Another important feature of this strategy is the high sensitivity of HOMO-LUMO energies and photoinduced charge transfer toward sequential functionalization. As a result, systematic fluorescence on-off switching has been demonstrated upon subsequent substitution with the electron-donating 4-methoxyphenoxy substituent.

Microemulsion-Assisted Self-Assembly and Synthesis of Size-Controlled Porphyrin Nanocrystals with Enhanced Photocatalytic Hydrogen Evolution

Design and engineering of highly efficient light-harvesting nanomaterial systems to emulate natural photosynthesis for maximizing energy conversion have stimulated extensive efforts. Here we present a new class of photoactive semiconductor nanocrystals that exhibit high-efficiency energy transfer for enhanced photocatalytic hydrogen production under visible light. These nanocrystals are formed through noncovalent self-assembly of In(III) meso-tetraphenylporphine chloride (InTPP) during microemulsion assisted nucleation and growth process. Through kinetic control, a series of uniform nanorods with controlled aspect ratio and high crystallinity have been fabricated. Self-assembly of InTPP porphyrins results in extensive optical coupling and broader coverage of the visible spectrum for efficient light harvesting. As a result, these nanocrystals display excellent photocatalytic hydrogen production and photostability under the visible light in comparison with the commercial InTPP porphyrin powders.

Tailoring Photophysical Processes of Perylene-Based Light Harvesting Antenna Systems with Molecular Structure and Solvent Polarity

The excited-state dynamics of perylene-based bichromophoric light harvesting antenna systems has been tailored by systematic modification of the molecular structure and by using solvents of increasing polarity in the series toluene, chloroform, and benzonitrile. The antenna systems consist of blue light absorbing naphthalene monoimide (NMI) energy donors (D1, D2, and D3) and the perylene derived green light absorbing energy acceptor moieties, 1,7-perylene-3,4,9,10-tetracarboxylic tetrabutylester (A1), 1,7-perylene-3,4,9,10-tetracarboxylic monoimide dibutylester (A2), and 1,7-perylene-3,4,9,10-tetracarboxylic bisimide (A3). The design of these antenna systems is such that all exhibit ultrafast excitation energy transfer (EET) from the excited donor to the acceptor, due to the effective matching of optical properties of the constituent chromophores. At the same time, electron transfer from the donor to the excited acceptor unit has been limited by the use of a rigid and nonconjugated phenoxy bridge to link the donor and acceptor components. The antenna molecules D1A1, D1A2, and D1A3, which bear the least electron-rich energy donor, isopentylthio-substituted NMI D1, exhibited ultrafast EET (τ_EET ∼ 1 ps) but no charge transfer and, resultantly, emitted a strong yellow-orange acceptor fluorescence upon excitation of the donor. The other antenna molecules D2A2, D2A3, and D3A3, which bear electron-rich energy donors, the amino-substituted NMIs D2 and D3, exhibited ultrafast energy transfer that was followed by a slower (ca. 20-2000 ps) electron transfer from the donor to the excited acceptor. This charge transfer quenched the acceptor fluorescence to an extent determined by molecular structure and solvent polarity. These antenna systems mimic the primary events occurring in the natural photosynthesis, i.e., energy capture, efficient energy funneling toward the central chromophore, and finally charge separation, and are suitable building blocks for achieving artificial photosynthesis, because of their robustness and favorable and tunable photophysical properties.

A Molecular Level Approach To Elucidate the Supramolecular Packing of Light-Harvesting Antenna Systems

The molecular geometry and supramolecular packing of two bichromophoric prototypic light harvesting compounds D1A2 and D2A2, consisting of two naphthylimide energy donors that were attached to the 1,7 bay positions of a perylene monoimide diester energy acceptor, have been determined by a hybrid approach using magic angle spinning NMR spectroscopy and electron nano-crystallography (ENC), followed by modelling. NMR shift constraints, combined with the P 1 ‾ space group obtained from ENC, were used to generate a centrosymmetric dimer of truncated perylene fragments. This racemic packing motif is used in a biased molecular replacement approach to generate a partial 3D electrostatic scattering potential map. Resolving the structure of the bay substituents is guided by the inversion symmetry, and the distance constraints obtained from heteronuclear correlation spectra. The antenna molecules form a pseudocrystalline lattice of antiparallel centrosymmetric dimers with pockets of partially disordered bay substituents. The two molecules in a unit cell form a butterfly-type arrangement. The hybrid methodology that has been developed is robust and widely applicable for critical structural underpinning of self-assembling structures of large organic molecules.

Influence of imide-substituents on the H-type aggregates of perylene diimides bearing cetyloxy side-chains at bay positions

A series of perylene-3,4:9,10-tetracarboxylic acid diimides (PDIs, namely TYR-PDI, AEP-PDI, CET-PDI, ANP-PDI and KOD-PDI), comprising long linear cetyloxy side-chains functionalized at the 1,7-bay positions and the different substituents (i.e., hydrophobic/hydrophilic segments) symmetrically linked at the two imide-positions of the perylene core were synthesized to investigate the influence of imide-substituent patterns on the aggregation behaviours of PDIs. The photophysical properties of these PDIs were studied by UV-Vis absorption, fluorescence and time-resolved photoluminescence spectroscopy. The differences in the photophysical properties of the PDIs indicate (i) blue-shifted and broadening absorption properties in both solution and thin-films, (ii) red-shifted and broadening fluorescence behavior at their emission maximum in solution, however, blue-shifted fluorescence behavior in thin-films, and (iii) obviously longer fluorescence life-times corresponding to the existence of rotationally displaced H-type aggregates. The formation of short-range ordered rod-like microstructures through face-to-face alignment of columnar rectangular H-type PDI aggregates was rationalized by scanning electron microscopy. The X-ray diffraction study revealed that the formation of well-defined columnar rectangular (Col_rp) H-type PDI aggregates indicated a nearly constant intracolumnar stacking distance of ∼3.9 Å for all PDIs. All of these findings were consistent with the formation of hydrophobic/hydrophilic interactions between the imide-substituents in addition to the strong hydrophobic π-π stacking interactions between the conjugated perylene cores, which were enforced in the H-type PDI aggregates that spontaneously self-organized into Col_rp structures.

Hemin as electrochemically regenerable co-reaction accelerator for construction of an ultrasensitive PTCA-based electrochemiluminescent aptasensor

In this work, hemin was firstly used as electrochemically regenerable co-reaction accelerator for signal amplification to develop an ultrasensitive aptasensor for Aflatoxin M1 (AFM1) detection. Initially, the perylenetetracarboxylic acid (PTCA) was directly employed as luminophore to construct the ECL sensing nano-platform by combining Au nanoparticles (Au NPs) for immobilizing thiol-terminated hairpin probe (H1). Then with the help of hairpin H2, H3, the AFM1-catalyzed hairpin assembly (CHA) was executed to produce the H1-H3 duplex, which could further initiate the hybridization chain reaction (HCR) to generate dendritic DNA polymers consisting of G-rich sequence for capturing large quantities of hemin on the electrode surface. Herein, hemin as electrochemically regenerable co-reaction accelerator could interact with the co-reactant (S₂O₈^2-) to obviously improve the luminous efficiency of the PTCA. Therefore, a strong and stable ECL signal was achieved by the employment of hemin as electrochemically regenerable co-reaction accelerator. The proposed aptasensor determined AFM1 down to 0.09pgmL^-1 within a linear range of 0.4pgmL^-1 to 400ngmL^-1. With excellent sensitivity and stability, the strategy provided an efficient and simple method for the trace detection of biomolecules in clinical analysis.

Substitution Effects on the Photoinduced Charge-Transfer Properties of Novel Perylene-3,4,9,10-tetracarboxylic Acid Derivatives

We report here the synthesis and photophysical study of a series of electron donor-acceptor molecules, in which electron-donating 4-methoxyphenoxy groups are attached to the 1,7-bay positions of four different perylene tetracarboxylic acid derivatives, namely, perylene tetraesters 1, perylene monoimide diesters 2, perylene bisimides 3, and perylene monobenzimidazole monoimides 4. These perylene derivatives are used because of their increasing order of electron-accepting capability upon moving from 1 to 4. Two additional donor-acceptor molecules are synthesized by linking electron-donating 4-methoxyphenyl groups to the imide position of perylene monoimide diester 2 and perylene bisimide 3. The motivation for this study is to achieve a good control over the photoinduced charge-transfer (CT) process in perylene-based systems by altering the position of electron donors and tuning the electron deficiency of perylene core. A comprehensive study of the photophysical properties of these molecules has shown a highly systematic trend in the magnitude of CT as a function of increased electron deficiency of the perylene core and solvent polarity. Importantly, just by changing the attachment of electron-donating group from "bay" to "imide" position, we are able to block the CT process. This implies that the positioning of the electron donor at the perylene core strongly influences the kinetics of the photoinduced CT process. In these compounds, the CT process is characterized by the quenching of fluorescence and singlet excited-state lifetimes as compared to model compounds bearing non-electron-donating 4-tert-butylphenoxy groups. Transient absorption spectroscopy did not reveal spectra of CT states. This most likely implies that the CT state is not accumulated, because of the faster charge recombination.

Construction and properties of a light-harvesting antenna system for phosphorescent materials based on oligofluorene-tethered Pt–porphyrins

Tetramerous molecular assemblies composed of four oligofluorenes as a light-harvesting antenna (LHA) and a Pt–porphyrin core as a phosphorescent chromophore were designed and synthesized for obtaining efficient phosphorescent materials.

Synthesis of Perylene-3,4,9,10-tetracarboxylic Acid Derivatives Bearing Four Different Substituents at the Perylene Core

Nucleophilic aromatic substitution reactions on 1,7-dibromoperylene-3,4,9,10-tetracarboxylic monoimide dibutylester, using phenol and pyrrolidine reagents, have been exploited to synthesize perylenes with four different substituents at the perylene core. The first substitution is always regiospecific at the imide-activated 7-position. A second substitution reaction does not always replace the bromine at C-1, but may replace a phenol substituent at the highly activated 7-position. Exploiting this reactivity pattern, a "mixed" 1,7-diphenoxy, 1,7-dipyrrolidinyl, and two 1-phenoxy-7-pyrrolidinyl derivatives have been synthesized.

Novel derivatives of 1,6,7,12-tetrachloroperylene-3,4,9,10-tetracarboxylic acid: synthesis, electrochemical and optical properties

Facile synthesis and opto-electrochemical properties of various unsymmetrically “peri”-substituted perylene derivatives, with four chloro-atoms at the bay-positions, have been reported.