Rhenium(i) trinuclear rings as highly efficient redox photosensitizers for photocatalytic CO2 reduction

Photocatalytic CO2 Reduction Using Mixed Catalytic Systems Comprising an Iron Cation with Bulky Phenanthroline Ligands

This study reports on efficient photocatalytic CO2 reduction reactions using mixed catalytic systems of an Fe ion source and various 1,10-phenanthroline derivatives (R1R2p) as ligands in the presence of triethanolamine (TEOA). As the relatively bulky substituents at positions 2 and 9 of R1R2p weakened the ability to coordinate to the Fe ion, the Fe ion formed TEOA complexes. The free R1R2p accepted an electron from the reduced photosensitizer through proton-coupled electron transfer (PCET) using protons of TEOA dissolved in a CH3CN solution in a CO2 atmosphere as the initial step of the catalytic cycle. Although the mixed system of the nonsubstituted 1,10-phenanthroline generates a stable tris(phenanthroline)-Fe(II) complex in solution, this complex could not function as a CO2 reduction catalyst. The mechanism in which R1R2p interacts with the Fe ion after PCET was proposed for this efficient photocatalytic CO2 reduction. The proposed photocatalytic system using the 2,9-di-sec-butyl-phenanthroline ligand could produce CO with high efficiency (quantum yield of 8.2%) combined with a dinuclear Cu(I) complex as a photosensitizer.

Significance of the connecting position between Zn(ii) porphyrin and Re(i) bipyridine tricarbonyl complex units in dyads for room-temperature phosphorescence and photocatalytic CO2 reduction: unexpected enhancement by triethanolamine in catalytic activity

We synthesized three new dyads composed of a Zn porphyrin and fac-Re(bpy)(CO)3Br (bpy = 2,2'-bipyridine) units, ZnP-nBpy[double bond, length as m-dash]ReBr (n = 4, 5, and 6), in which the porphyrin is directly connected at the meso-position through the 4-, 5-, or 6-position of the bpy. We investigated the relationships between the connecting positions and the photophysical properties as well as catalytic activity in the CO2 reduction reaction. The dyad connected through the 6-position, ZnP-6Bpy[double bond, length as m-dash]ReBr, showed obvious phosphorescence with a lifetime of 280 μs at room temperature, in N,N-dimethylacetamide (DMA), whereas the other two dyads showed almost no phosphorescence under the same conditions. The photocatalytic CO2 reduction reactions in DMA using 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as the electron donor and the three dyads ZnP-nBpy[double bond, length as m-dash]ReBr selectively produced CO with similar initial rates, but the durabilities were low. The addition of triethanolamine (TEOA) suppressed the decomposition of dyads, improving their durabilities and reaction efficiencies. In particular, ZnP-5Bpy[double bond, length as m-dash]ReBr was remarkably improved-it gave the highest durability and reaction efficiency among the three dyads; the reaction quantum yield reached 24%. The reason for this significant activity is no accumulation of electrons on the Zn porphyrin in ZnP-5Bpy[double bond, length as m-dash]ReBr, which would be caused by dual interactions of TEOA with the Re and Zn ions in the dyad. As the highest catalytic activity was observed in ZnP-5Bpy[double bond, length as m-dash]ReBr among the three dyads, which had no room-temperature phosphorescence (RTP), the catalytic activities and RTP properties are considered independent, but they are greatly influenced by the connecting positions on the bpy ligand in ZnP-nBpy[double bond, length as m-dash]ReBr.

Rhenium(I) Complexes with Sulfur-Bridged Dipyridyl Ligands: Structural, Photophysical, and Computational Studies

A series of six new rhenium(I) tricarbonyl complexes [Re(CO)3(N-N)Br] bearing sulfur-bridged dipyridyl (N-N) ligands with three different oxidation states (sulfide (S), sulfoxide (SO), and sulfone (SO2)) are described. Spectroscopic studies show that changing the oxidation state of the ligands influences the photophysical properties of the complexes, with complexes 3 and 6 containing the sulfone ligand exhibiting a lower energy MLCT absorption band tailing into the visible region. Solution-state emission measurements show that these complexes exhibit readily tunable emission energies from 480 to 610 nm, depending on the oxidation state of the sulfur bridge and the presence of substituents on the pyridyl rings. Solid-state emission measurements show that the emission is significantly red-shifted upon oxidation of the sulfur bridge to sulfone with enhanced photoluminescence quantum yield.

Mechanistic Insights into Photochemical CO2 Reduction to CH4 by a Molecular Iron-Porphyrin Catalyst

Iron tetraphenylporphyrin complex modified with four trimethylammonium groups (Fe-p-TMA) is found to be capable of catalyzing the eight-electron eight-proton reduction of CO₂ to CH₄ photochemically in acetonitrile. In the present work, density functional theory (DFT) calculations have been performed to investigate the reaction mechanism and to rationalize the product selectivity. Our results revealed that the initial catalyst Fe-p-TMA ([Cl-Fe(III)-LR₄]⁴⁺, where L = tetraphenylporphyrin ligand with a total charge of -2, and R₄ = four trimethylammonium groups with a total charge of +4) undergoes three reduction steps, accompanied by the dissociation of the chloride ion to form [Fe(II)-L^••2-R₄]²⁺. [Fe(II)-L^••2-R₄]²⁺, bearing a Fe(II) center ferromagnetically coupled with a tetraphenylporphyrin diradical, performs a nucleophilic attack on CO₂ to produce the ¹η-CO₂ adduct [CO₂^•--Fe(II)-L^•-R₄]²⁺. Two intermolecular proton transfer steps then take place at the CO₂ moiety of [CO₂^•--Fe(II)-L^•-R₄]²⁺, resulting in the cleavage of the C-O bond and the formation of the critical intermediate [Fe(II)-CO]⁴⁺ after releasing a water molecule. Subsequently, [Fe(II)-CO]⁴⁺ accepts three electrons and one proton to generate [CHO-Fe(II)-L^•-R₄]²⁺, which finally undergoes a successive four-electron-five-proton reduction to produce methane without forming formaldehyde, methanol, or formate. Notably, the redox non-innocent tetraphenylporphyrin ligand was found to play an important role in CO₂ reduction since it could accept and transfer electron(s) during catalysis, thus keeping the ferrous ion at a relatively high oxidation state. Hydrogen evolution reaction via the formation of Fe-hydride ([Fe(II)-H]³⁺) turns out to endure a higher total barrier than the CO₂ reduction reaction, therefore providing a reasonable explanation for the origin of the product selectivity.

Mechanistic insights into CO2 conversion to CO using cyano manganese complexes

Without the use of a photosensitizer, [Mn(bpy)(CO)₃(CN)] (MnCN) can photochemically form [Mn(bpy)(CO)₃]^-, the active species for CO₂ reduction. While cases of the axial X-ligand dissociating upon irradiation of fac-[M(N-N)(CO)₃X] complexes (M = Mn or Re; N-N = bipyridine (bpy) ligand; X = halogen or pseudohalogen) are well documented, the axial cyanide ligand is retained when either [Mn(bpy)(CO)₃(CN)] or [Mn(mesbpy)(CO)₃(CN)], MnCN(mesbpy), are irradiated anaerobically. Infrared and UV-vis spectroscopies indicate the formation of [Mn(bpy)(CO)₂(MeCN)(CN)] (s-MnCN) as the primary product during the irradiation of MnCN. An in-depth analysis of the photochemical mechanism for the formation of [Mn(bpy)(CO)₃]^- from MnCN is presented. MnCN(mesbpy) is too sterically hindered to undergo the same photochemical mechanism as MnCN. However, MnCN(mesbpy) is found to be electrocatalytically active for CO₂ reduction to CO. Thus providing an interesting distinction between photochemical and electrochemical charge transfer.

Supramolecular multi-electron redox photosensitisers comprising a ring-shaped Re(i) tetranuclear complex and a polyoxometalate

Redox photosensitisers (PSs) play essential roles in various photocatalytic reactions. Herein, we synthesised new redox PSs of 1 : 1 supramolecules that comprise a ring-shaped Re(i) tetranuclear complex with 4+ charges and a Keggin-type heteropolyoxometalate with 4- charges. These PSs photochemically accumulate multi-electrons in one molecule (three or four electrons) in the presence of an electron donor and can supply electrons with different reduction potentials. PSs were successfully applied in the photocatalytic reduction of CO₂ using catalysts (Ru(ii) and Re(i) complexes) and triethanolamine as a reductant. In photocatalytic reactions, these supramolecular PSs supply a different number of electrons to the catalyst depending on the redox potential of the intermediate, which is made from the one-electron-reduced species of the catalyst and CO₂. Based on these data, information on the reduction potentials of the intermediates was obtained.

Recent Advances in Metal-Based Molecular Photosensitizers for Artificial Photosynthesis

Artificial photosynthesis (AP) has been extensively applied in energy conversion and environment pollutants treatment. Considering the urgent demand for clean energy for human society, many researchers have endeavored to develop materials for AP. Among the materials for AP, photosensitizers play a critical role in light absorption and charge separation. Due to the fact of their excellent tunability and performance, metal-based complexes stand out from many photocatalysis photosensitizers. In this review, the evaluation parameters for photosensitizers are first summarized and then the recent developments in molecular photosensitizers based on transition metal complexes are presented. The photosensitizers in this review are divided into two categories: noble-metal-based and noble-metal-free complexes. The subcategories for each type of photosensitizer in this review are organized by element, focusing first on ruthenium, iridium, and rhenium and then on manganese, iron, and copper. Various examples of recently developed photosensitizers are also presented.

No competitive inhibition of bicarbonate or carbonate for formate dehydrogenase from Candida boidinii -catalyzed CO2 reduction

Formate dehydrogenase from Candida boidinii (CbFDH) reversibly catalyzes the formate to CO2 with the redox coupling NAD+/NADH. While many studies on CbFDH-catalyzed formate oxidation in the presence of NAD+ are...

Photocatalytic CO2 reduction sensitized by a special-pair mimic porphyrin connected with a rhenium(i) tricarbonyl complex

Zn porphyrins with an imidazolyl group at the meso position generate a highly stable porphyrin dimer by complementary coordination from the imidazolyl to the Zn ion in noncoordinating solvents such as chloroform, which mimics the natural special pair in photosynthesis. In this work, we have synthesized an imidazolyl-substituted Zn porphyrin connected with a Re 2,2-bipyridine tricarbonyl complex as a CO₂ reduction catalyst via a p-phenylene linker, affording a homodimer with two Re complexes on both sides (ReDRe). The dimeric structure is easily dissociated into the corresponding monomers in coordinating solvents. Therefore, we prepared a mixture containing a heterodimer with the Re carbonyl complex on one side (ReD) by simple mixing with an imidazolyl Zn porphyrin and evaporating the solvent. Using the Grubbs catalyst, the subsequent olefin metathesis reaction of the mixture gave covalently linked porphyrin dimers through the allyloxy side chains, enabling the isolation of the stable hetero- (ReD′) and homo-dimers (ReD′Re) with gel permeation chromatography. The Zn porphyrin dimers have intense absorption bands in the visible light region and acted as good photosensitizers in photocatalytic CO₂ reduction in a mixture of N,N-dimethylacetamide and triethanolamine (5 : 1 v/v) containing 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole as the electron donor, giving CO with high selectivity and durability. Under irradiation with strong light intensity, the reaction rate in ReD′ exceeded that of the previous porphyrin Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Re complex dyad, ZnP-phen=Re. For instance, after irradiation at 560 nm for 18 h, the turnover number (TON_CO) of ReD′ reached 2800, whereas the TON_CO of ZnP-phen=Re was 170. The high activity in the system using the porphyrin dimer originates from no accumulation of the one-electron reduced species of the porphyrin that inhibit light absorption due to the inner-filter effect.

An artificial special pair was connected with a Re 2,2-bipyridine tricarbonyl complex. The special pair derivative acted as a good photosensitizer in photocatalytic CO₂ reduction, giving CO with high selectivity and durability.

Quantum Dot-Sensitized Photoreduction of CO2 in Water with Turnover Number > 80,000

Climate change and global energy demands motivate the search for sustainable transformations of carbon dioxide (CO₂) to storable liquid fuels. Photocatalysis is a pathway for direct conversion of CO₂ to CO, one step within light-powered reaction networks that could, if efficient enough, transform the solar energy conversion landscape. To date, the best performing photocatalytic CO₂ reduction systems operate in nonaqueous solvents, but technologically viable solar fuels networks will likely operate in water. Here we demonstrate catalytic photoreduction of CO₂ to CO in pure water at pH 6-7 with an unprecedented combination of performance parameters: turnover number (TON(CO)) = 72,484-84,101, quantum yield (QY) = 0.96-3.39%, and selectivity (S_CO) > 99%, using CuInS₂ colloidal quantum dots (QDs) as photosensitizers and a Co-porphyrin catalyst. At higher catalyst concentration, the system reaches QY = 3.53-5.23%. The performance of the QD-driven system greatly exceeds that of the benchmark aqueous system (926 turnovers with a quantum yield of 0.81% and selectivity of 82%), due primarily to (i) electrostatic attraction of the QD to the catalyst, which promotes fast multielectron delivery and colocalization of protons, CO₂, and catalyst at the source of photoelectrons, and (ii) termination of the QD's ligand shell with free amines, which capture CO₂ as carbamic acid that serves as a reservoir for CO₂, effectively increasing its solubility in water, and lowers the onset potential for catalytic CO₂ reduction by the Co-porphyrin. The breakthrough efficiency achieved in this work represents a nonincremental step in the realization of reaction networks for direct solar-to-fuel conversion.

Determining Excited-State Structures and Photophysical Properties in Phenylphosphine Rhenium(I) Diimine Biscarbonyl Complexes Using Time-Resolved Infrared and X-ray Absorption Spectroscopies

We have explored the structural factors on the photophysical properties in two rhenium(I) diimine complexes in acetonitrile solution, cis,trans-[Re(dmb)(CO)₂(PPh₂Et)₂]⁺ (Et(2,2)) and cis,trans-[Re(dmb)(CO)₂(PPh₃)₂]⁺ ((3,3)) (dmb = 4,4'-dimethyl-2,2'-bipyridine, Ph = phenyl, Et = ethyl) using the combination method of time-resolved infrared spectroscopy, time-resolved extended X-ray absorption fine structure, and quantum chemical calculations. The difference between these complexes is the number of phenyl groups in the phosphine ligand, and this only indirectly affects the central Re(I). Despite this minor difference, the complexes exhibit large differences in emission wavelength and excited-state lifetime. Upon photoexcitation, the bond length of Re-P and angle of P-Re-P are significantly changed in both complexes, while the phenyl groups are largely rotated by ∼20° only in (3,3). In contrast, there is little change in charge distribution on the phenyl groups when Re to dmb charge transfer occurs upon photoexcitation. We concluded that the instability from steric effects of phenyl groups and diimine leads to a smaller Stokes shift of the lowest excited triplet state (T₁) in (3,3). The large structural change between the ground and excited states causes the longer lifetime of T₁ in (3,3).

Mechanistic study of photocatalytic CO2 reduction using a Ru(ii)-Re(i) supramolecular photocatalyst

Supramolecular photocatalysts comprising [Ru(diimine)₃]²⁺ photosensitiser and fac-[Re(diimine)(CO)₃{OC(O)OC₂H₄NR₂}] catalyst units can be used to reduce CO₂ to CO with high selectivity, durability and efficiency. In the presence of triethanolamine, the Re catalyst unit efficiently takes up CO₂ to form a carbonate ester complex, and then direct photocatalytic reduction of a low concentration of CO₂, e.g., 10% CO₂, can be achieved using this type of supramolecular photocatalyst. In this work, the mechanism of the photocatalytic reduction of CO₂ was investigated applying such a supramolecular photocatalyst, RuC2Re with a carbonate ester ligand, using time-resolved visible and infrared spectroscopies and electrochemical methods. Using time-resolved spectroscopic measurements, the kinetics of the photochemical formation processes of the one-electron-reduced species RuC2(Re)−, which is an essential intermediate in the photocatalytic reaction, were clarified in detail and its electronic structure was elucidated. These studies also showed that RuC2(Re)− is stable for 10 ms in the reaction solution. Cyclic voltammograms measured at various scan rates besides temperature and kinetic analyses of RuC2(Re)− produced by steady-state irradiation indicated that the subsequent reaction of RuC2(Re)− proceeds with an observed first-order rate constant of approximately 1.8 s⁻¹ at 298 K and is a unimolecular reaction, independent of the concentrations of both CO₂ and RuC2(Re)−.

Formation processes and reactivity of an important intermediate of photocatalytic CO₂ reduction, one-electron reduced species of a Ru(ii)–Re(i) supramolecular photocatalyst with a carbonate ester ligand, were investigated in detail.

Water-Assisted Highly Efficient Photocatalytic Reduction of CO2 to CO with Noble Metal-Free Bis(terpyridine)iron(II) Complexes and an Organic Photosensitizer

Photocatalytic CO₂ reduction reaction is believed to be a promising approach for CO₂ utilization. In this work, a noble metal-free photocatalytic system, composed of bis(terpyridine)iron(II) complexes and an organic thermally activated delayed fluorescence compound, has been developed for selective reduction of CO₂ to CO with a maximum turnover number up to 6320, 99.4% selectivity, and turnover frequency of 127 min^-1 under visible-light irradiation in dimethylformamide/H₂O solution. More than 0.3 mmol CO was generated using 0.05 μmol catalyst after 2 h of light irradiation. The apparent quantum yield was found to be 9.5% at 440 nm (180 mW cm^-2). Control experiments and UV-vis-NIR spectroscopy studies further demonstrated that water strongly promoted the photocatalytic cycle and terpyridine ligands rather than Fe(II) were initially reduced during the photocatalytic process.

Synthesis and Light-Harvesting Functions of Ring-Shaped Re(I) Trinuclear Complexes Connected with an Emissive Ru(II) Complex

Ring-shaped Re(I) multinuclear complexes (Re(I) rings) in which Re(I)-diimine-biscarbonyl complexes are connected to each other through bisphosphine bridging ligands exhibit very suitable photophysical and electrochemical properties as redox photosensitizers. We developed two approaches for synthesizing Re(I) rings connected with a Ru(II) complex: cyclization of a linear Re(I) trinuclear complex connected with a Ru(II) complex and Mizoroki-Heck coupling of a ring-shaped Re(I) trinuclear complex and a Ru(II) complex. Photophysical measurements of these heteromultinuclear complexes and comparisons with their model complexes indicated that they exhibit efficient light-harvesting abilities, where energy transfer from the excited ring-shaped Re(I) trinuclear complex unit to the Ru(II) complex unit proceeds efficiently.

In-Depth Study of the Electronic Properties of NIR-Emissive κ3N Terpyridine Rhenium(I) Dicarbonyl Complexes

The structure-properties relationship in a series of carbonyl rhenium(I) complexes based on substituted terpyridine ligands of general formula [Re(κ^xN-Rtpy)(CO)_yL]ⁿ⁺ is explored by both experimental and theoretical methods. In these compounds, the terpyridine ligands adopt both bidentate (κ²N) and terdentate (κ³N) coordination modes associated with three or two carbonyls, respectively. Conversion from the κ²N to the κ³N coordination mode leads to large changes in the absorption spectra and oxidation potentials due to destabilization of the HOMO level of each complex. The absorption profiles of the κ³N complexes cover the whole visible spectra with lower maxima around 700 nm, tailing out to 800 nm, while no emission is observed with Br^- as the axial ligand L. When the axial ligand is modified from the native halide to pyridine or triphenylphosphine, the lowest absorption band is blue-shifted by 60 and 90 nm, respectively. These cationic complexes are near-infrared emitters with emission maxima between 840 and 950 nm for the pyridine compounds and 780-800 nm for the triphenylphosphine compounds.

Building C(sp3 ) Molecular Complexity on 2,2'-Bipyridine and 1,10-Phenanthroline in Rhenium Tricarbonyl Complexes

The reactions of [Re(N-N)(CO)₃ (PMe₃ )]OTf (N-N=2,2'-bipyridine, bipy; 1,10-phenanthroline, phen) compounds with tBuLi and with LiHBEt₃ have been explored. Addition to the N-N chelate took place with different site-selectivity depending on both chelate and nucleophile. Thus, with tBuLi, an unprecedented addition to C5 of bipy, a regiochemistry not accessible for free bipy, was obtained, whereas coordinated phen underwent tBuLi addition to C2 and C4. Remarkably, when LiHBEt₃ reacted with [Re(bipy)(CO)₃ (PMe₃ )]OTf, hydride addition to the 4 and 6 positions of bipy triggered an intermolecular cyclodimerization of two dearomatized pyridyl rings. In contrast, hydride addition to the phen analog resulted in partial reduction of one pyridine ring. The resulting neutral Re^I products showed a varied reactivity with HOTf and with MeOTf to yield cationic complexes. These strategies rendered access to Re^I complexes containing bipy- and phen-derived chelates with several C(sp³ ) centers.

Visible-light driven reduction of CO2 to formate by a water-soluble zinc porphyrin and formate dehydrogenase system with electron-mediated amino and carbamoyl group-modified viologen

Visible-light-driven CO₂ reduction to formate with a system consisting of water-soluble zinc porphyrin, formate dehydrogenase from Candida boidinii and 1-amino-1′-carbamoyl-4,4′-bipyridinium salt as an electron mediator in the presence of triethanolamine was developed.

Targeted Synthesis of NIR Luminescent Rhenium Diimine cis,trans-[Re( N N )(CO)2 (L)2 ]n+ Complexes Containing N-Donor Axial Ligands: Photophysical, Electrochemical, and Theoretical Studies

The combined action of ultraviolet irradiation and microwave heating onto acetonitrile solution of [Re( N N )(CO)₃ (NCMe)]OTf ( N N =phenantroline and neocuproine) afforded cis,trans-Re( N N )(CO)₂ (NCMe)₂ ]⁺ acetonitrile derivatives. Substitution of relatively labile NCMe with a series of aromatic N-donor ligands (pyridine, pyrazine, 4,4'-bipyridine, N-methyl-4,4'-bipyridine) gave a novel family of the diimine cis,trans-[Re( N N )(CO)₂ (L)₂ ]⁺ complexes. Photophysical studies of the obtained compounds in solution revealed unusually high absorption across the visible region and NIR phosphorescence with emission band maxima ranging from 711 to 805 nm. The nature of emissive excited states was studied using DFT calculations to show dominant contribution of ³ MLCT (dπ(Re)→π*( N N )) character. Electrochemical (CV and DPV) studies of the monocationic diimine complexes revealed one reduction and one oxidation wave assigned to reduction of the diimine moiety and oxidation of the rhenium center, respectively.

Influence of the Nucleophilic Ligand on the Reactivity of Carbonyl Rhenium(I) Complexes towards Methyl Propiolate: A Computational Chemistry Perspective

A comparative theoretical study on the reactivity of the complexes [ReY(CO)₃(bipy)] (Y = NH₂, NHMe, NHpTol, OH, OMe, OPh, PH₂, PHMe, PMe₂, PHPh, PPh₂, PMePh, SH, SMe, SPh; bipy = 2,2′-bipyridine) towards methyl propiolate was carried out to analyze the influence of both the heteroatom (N, O, P, S) and the alkyl and/or aryl substituents of the Y ligand on the nature of the product obtained. The methyl substituent tends to accelerate the reactions. However, an aromatic ring bonded to N and O makes the reaction more difficult, whereas its linkage to P and S favour it. On the whole, ligands with O and S heteroatoms seem to disfavour these processes more than ligands with N and P heteroatoms, respectively. Phosphido and thiolato ligands tend to yield a coupling product with the bipy ligand, which is not the general case for hydroxo, alcoxo or amido ligands. When the Y ligand has an O/N and an H atom the most likely product is the one containing a coupling with the carbonyl ligand, which is not always obtained when Y contains P/S. Only for OMe and OPh, the product resulting from formal insertion into the Re-Y bond is the preferred.

Photocatalytic CO2 reduction using metal complexes in various ionic liquids

Aiming to diversify photocatalytic systems for CO2 reduction using metal complexes, this study investigated the use of various ionic liquids as reaction solvents. The photophysical properties of an Ir(iii) complex, functioning as a photosensitiser, and the photocatalytic ability of mixed systems consisting of the Ir(iii) photosensitiser and a Re(i) catalyst in twelve kinds of ionic liquids were systematically investigated by comparison with those in N,N-dimethylacetamide (DMA), which is a standard solvent for photocatalytic CO2 reduction. Even though the photophysical properties of the Ir(iii) complex in ionic-liquid solutions were quite similar to those in DMA, both the photosensitising ability of the Ir complex and the photocatalytic abilities of the systems strongly depended on the structures of the ionic liquids. Several ionic liquids were successfully used as new solvents for the photocatalytic systems showing durability similar to or higher than DMA solutions. The results demonstrated that even a small modification of the molecular structures of ionic liquids can control the efficiencies of both the photosensitising cycles and the catalytic cycles for CO2 reduction.

Theoretical study on CO2 reduction catalyzed by formate dehydrogenase using the cation radical of a bipyridinium salt with an ionic substituent as a co-enzyme

Mechanism for formate dehydrogenase from Candida boidinii catalyzed CO₂ reduction to formate with the cation radical of a 4,4′-bipyridinium salt with an ionic substituent as a co-enzyme was clarified by theoretical studies.

Merging an organic TADF photosensitizer and a simple terpyridine–Fe(iii) complex for photocatalytic CO2 reduction

An efficient earth-abundant photocatalytic system composed of an organic TADF photosensitizer and a simple terpyridine–Fe(iii) complex was developed for CO₂ reduction.

Artificial co-enzyme based on carbamoyl-modified viologen derivative cation radical for formate dehydrogenase in the catalytic CO2 reduction to formate

The interaction between the single-electron reduced carbamoyl-modified-4,4-bipyridinium salt and CbFDH in the CO₂ reduction to formate is elucidated by enzymatic kinetic analysis, the docking simulation and density functional theory calculation.

Synthesis of an Emissive Spectacle-Shaped Hexanuclear Rhenium(I) Complex

Ring-shaped multinuclear Re(I) complexes (Re(I) rings) have the potential to function as useful units in multifarious photofunctional compounds because of their flexibility in molecular design and various photofunctions. The first synthetic example of the coupling reaction using a Re(I) ring as a building block to synthesize a novel spectacle-shaped hexanuclear complex is reported herein. This complex shows an efficient intramolecular energy transfer to accumulate the excitation energy into the central Re(I) units, and has suitable photophysical properties as a photosensitizer.

Homogeneous visible light mediated transition metal catalysis other than Ruthenium and Iridium

The field of photoredox chemistry is dominated by ruthenium- or iridium based metal complexes or organic dyes that are employed as catalysts. Other metal based coordination compounds provide a cost efficient alternative, however, the much shorter excited lifetimes generally observed for such complexes make their application more challenging. Nevertheless, a growing number of successful examples with metal complexes based on chromium, iron, nickel, zirconium, cerium, rhenium, platinum, uranium, and especially on copper exist, which is being reviewed in this chapter.

Photocatalytic CO2 Reduction Using Various Heteroleptic Diimine-Diphosphine Cu(I) Complexes as Photosensitizers

The development of efficient redox-photosensitizers based on the earth-abundant metal ions as an alternative toward noble- and/or rare-metal based photosensitizers is very desirable. In recent years, heteroleptic diimine-diphosphine Cu(I) complexes have been well investigated as one of the most remarkable candidates because of their great potentials as efficient photosensitizers. Here, we investigated the effects of the structure of the diphosphine ligands on the photosensitizing abilities using a series of Cu(I) complexes bearing 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (dmpp) and various diphosphine ligands in order to explore the suitable structure for the photosensitizing reactions. The number of methylene chains between the two phosphorous atoms in the diphosphine ligands was systematically changed from two to four, and the relationship between the length of the carbon chains and the photosensitizing abilities were investigated by conducting photocatalytic CO₂ reduction with the Cu(I) complexes as photosensitizers. Turnover frequencies of the CO₂ reduction drastically increased with increasing the length of the carbon chains. The systematic study herein reported suggests that the large P-Cu-P angles should be one of the most important factors for enhancing the photosensitizing abilities.

An integrated Re(i) photocatalyst/sensitizer that activates the formation of formic acid from reduction of CO2

cis-[Re(bpy)₂(CO)₂]⁺OTf⁻ is a new integrated photosensitizer/catalyst for the selective visible light promoted photocatalytic reduction of CO₂ to yield formic acid.

Synthesis of Re(I) Rings Comprising Different Re(I) Units and Their Light-Harvesting Abilities

Trimethylamine N-oxide (Me₃NO) could selectively remove only one CO ligand from fac-[Re(N^N)(CO)₃(PR₂R')]⁺ (N^N = diimine ligand), whereby only the CO ligand in the trans position to the phosphorus ligand was selectively removed to give cis,trans-[Re^I(N^N)(CO)₂(PR₂R')(L)] ⁿ⁺ in good yields. This decarbonylation reaction using Me₃NO was found to be especially useful for synthesizing biscarbonyl Re(I) complexes with electron-withdrawing groups in the diimine ligand, which could not be synthesized or were obtained only in low yields by the photochemical method. Me₃NO also selectively removed the carbonyl ligands in the trans position to the phosphorus ligands from the edge Re(I) complex units, which have the fac-[Re(N^N)(CO)₃(PR₂R')]⁺ structure, in linear-shaped Re(I) multinuclear complexes. This reaction was successfully applied to synthesize a novel precursor with ring-shaped multinuclear Re complexes (Re-rings) comprising different kinds of Re(I) units. The newly synthesized Re-rings, which consist of one Re unit with a 4,4'-bis(trifluoromethyl)-2,2'-bipyridine (CF₃bpy) ligand and one or two Re unit(s) with a 2,2'-bipyridine (bpy) ligand, showed almost quantitative excitation-energy harvesting ability from the Re unit(s) with bpy to that with CF₃bpy.

Photocatalytic CO2 Reduction with Manganese Complexes Bearing a κ2-PN Ligand: Breaking the α-Diimine Hold on Group 7 Catalysts and Switching Selectivity

The fundamental challenge of reducing CO₂ into more valuable energy-containing compounds depends on revealing new catalysts for this process. By removal of the long-standing limitation of α-diimine ligation, which is dominant in photocatalytic complexes in this area, new visible-light, CO₂-reducing photocatalysts based on Mn and Re supported by κ²-PN phosphinoaminopyridine ligands were identified. These catalysts, [M{κ²-(Ph₂P)NH(NC₅H₄)}(CO)₃Br], displayed excellent product selectivity and, by a change of only the metal center, gave a dramatic product switch from CO with M = Mn to HCO₂H with M = Re. The catalyst systems were explored with variation of the ligand, electron donor, solvent, and photosensitizer. The products were definitively traced using ¹³CO₂ as a substrate. Both complexes quenched the excited-state photosensitizer Ru(bpy)₃²⁺*, suggesting oxidative quenching as a potential entry into the catalytic cycle.

Photophysics and Photoredox Catalysis of a Homoleptic Rhenium(I) Tris(diisocyanide) Complex

Herein a homoleptic rhenium(I) complex bearing three chelating diisocyanide ligands and its photophysical properties are communicated. The complex emits weakly from a high-energy triplet metal-to-ligand charge-transfer excited state with an 8 ns lifetime in deaerated CH₃CN at 22 °C and is shown to act as an efficient photoredox catalyst comparable to [Ir(ppy)₃] (ppy = 2-phenylpyridine) in representative test reactions.

Activation of the catalytic function of formaldehyde dehydrogenase for formate reduction by single-electron reduced methylviologen

The kinetic properties of formate reduction to formaldehyde with formaldehyde dehydrogenase (FldDH) using single-electron reduced methylviologen (MV˙) as a co-enzyme were clarified.

The effect of the functional ionic group of the viologen derivative on visible-light driven CO2 reduction to formic acid with the system consisting of water-soluble zinc porphyrin and formate dehydrogenase

The effect of the functional ionic group of 4,4′-bipyridinium salt on the visible-light driven CO₂ conversion to formic acid with the system consisting of zinc porphyrin and formate dehydrogenase was investigated.

Modulation of the Photophysical, Photochemical, and Electrochemical Properties of Re(I) Diimine Complexes by Interligand Interactions

The photophysical and photochemical properties of transition metal complexes have attracted considerable attention because of their recent applications as photocatalysts in artificial photosynthesis and organic synthesis, as light emitters in electroluminescent (EL) devices, and as dyes in solar cells. The general control methods cannot be always used to obtain transition metal complexes with photochemical properties that are suitable for the above-mentioned applications. In the fields of solar energy conversion, strong metal-to-ligand charge-transfer (MLCT) absorption of redox photosensitizers and/or photocatalysts in the visible region with long wavelength is essential. However, the usual methods, i.e., introduction of electron-withdrawing groups into the electron-accepting ligand and/or weak-field ligands into the central metal, have several drawbacks, including shorter excited-state lifetime, lower emission efficiency, and lower oxidation and reduction power. Herein we describe a new method to control the photophysical, photochemical, and electrochemical properties of Re(I) diimine carbonyl complexes that have been widely used in various fields such as photocatalysts for CO₂ reduction and emitters in EL devices and sensors. This method involves the introduction of interligand interactions (π-π and CH-π interactions) into the Re(I) complexes; the aromatic diimine ligand coordinating to the Re center approaches the aryl groups on the phosphine ligand or ligands at the cis position, which "compulsorily" induces a weak interaction between these aromatic groups. As a result of this interligand interaction, the Re complexes with the aromatic diimine ligand and the arylphosphine ligand(s) exhibit red-shifted ¹MLCT absorption but afford blue-shifted emission from the triplet metal-to-ligand charge-transfer (³MLCT) excited state. This increases the oxidation power and lifetime of the ³MLCT excited state. These unique property changes are favorable, particularly for redox photosensitizers. The interligand interaction is strongly expressed by the ring-shaped multinuclear Re(I) complexes (Re-rings). In the case of Re-rings with high steric hindrance due to a small inner cavity, the lifetime of the ³MLCT excited state is up to 8 μs and the emission quantum yield is up to 70%. These properties cannot be obtained by the corresponding mononuclear Re(I) complexes, which generally exhibit shorter lifetimes (<1 μs) and lower emission quantum yields (<10%). Some of the Re-rings could be successfully applied as efficient photosensitizers in photocatalytic systems for CO₂ reduction; the highest quantum yields for CO₂ reduction were achieved by using photocatalytic systems composed of Re-rings as the photosensitizers and Re(I) (82%), Ru(II) (58%), and Mn(I) (48%) complexes as catalysts. This interligand interaction potentially provides unique and useful methods for controlling the photophysical, photochemical, and electrochemical functions of various metal complexes, paving the way to create new functions for metal complexes.

Product Selectivity in Homogeneous Artificial Photosynthesis Using [(bpy)Rh(Cp*)X]n+-Based Catalysts

Due to the limited amount of fossil energy carriers, the storage of solar energy in chemical bonds using artificial photosynthesis has been under intensive investigation within the last decades. As the understanding of the underlying working principle of these complex systems continuously grows, more focus will be placed on a catalyst design for highly selective product formation. Recent reports have shown that multifunctional photocatalysts can operate with high chemoselectivity, forming different catalysis products under appropriate reaction conditions. Within this context [(bpy)Rh(Cp*)X]n+-based catalysts are highly relevant examples for a detailed understanding of product selectivity in artificial photosynthesis since the identification of a number of possible reaction intermediates has already been achieved.