Side-chain modulation of dithienofluorene-based copolymers to achieve high field-effect mobilities

Nitrogen-Bridged Fused-Ring Nonacyclic and Heptacyclic A-D-A Acceptors for Organic Photovoltaics

In this work, we designed two nitrogen-bridged fluorene-based heptacyclic FNT and nonacyclic FNTT ladder-type structures, which were constructed by one-pot palladium-catalyzed Buchwald-Hartwig amination. FNT and FNTT were further end-capped by FIC acceptors to form two FNT-FIC and FNTT-FIC non-fullerene acceptors (NFAs), respectively. The two NFAs exhibit more red-shifted absorption and higher crystallinity compared to those of the corresponding carbon-bridged FCT-FIC and FCTT-FIC counterparts. Grazing incidence wide-angle X-ray scattering (GIWAXS) measurements reveal that the 2-butyloctyl groups on the nitrogen in the convex region of FNT-FIC interdigitate with the dioctyl groups on the fluorene in the concave region of another FNT-FIC, resulting in a lamellar packing structure with a d spacing of 13.27 Å. As a consequence, the PM6:FNT-FIC (1:1 wt %) device achieved a power conversion efficiency (PCE) of only 6.60%, primarily due to the highly crystalline nature of FNT-FIC, which induced significant phase separation between PM6 and FNT-FIC in the blended film. However, FNTT-FIC, featuring 2-butyloctyl groups positioned on the nitrogen within the concave region of its curved skeleton, exhibits improved donor-acceptor miscibility, thereby promoting a more favorable morphology. As a result, the PM6:FNTT-FIC (1:1.2 wt %) device exhibited a higher PCE of 12.15% with an exceptional Voc of 0.96 V. This research demonstrates that placing alkylamino moieties within the concave region of curved A-D-A NFAs leads to a better molecular design.

Tuning the nanostructure and molecular orientation of high molecular weight diketopyrrolopyrrole-based polymers for high-performance field-effect transistors

As a versatile class of semiconductors, diketopyrrolopyrrole (DPP)-based conjugated polymers are well suited for applications of next-generation plastic electronics because of their excellent and tunable optoelectronic properties via a rational design of chemical structures. However, it remains a challenge to unravel and eventually influence the correlation between their solution-state aggregation and solid-state microstructure. In this contribution, the solution-state aggregation of high molecular weight PDPP3T is effectively enhanced by solvent selectivity, and a fibril-like nanostructure with short-range and long-range order is generated and tuned in thin films. The predominant role of solvent quality on polymer packing orientation is revealed, with an orientational transition from a face-on to an edge-on texture for the same PDPP3T. The resultant edge-on arranged films lead to a significant improvement in charge transport in transistors, and the field-effect hole mobility reaches 2.12 cm² V^-1 s^-1 with a drain current on/off ratio of up to 10⁸. Our findings offer a new strategy for enhancing the device performance of polymer electronic devices.

High-performance five-ring-fused organic semiconductors for field-effect transistors

Organic molecular semiconductors have been paid great attention due to their advantages of low-temperature processability, low fabrication cost, good flexibility, and excellent electronic properties. As a typical example of five-ring-fused organic semiconductors, a single crystal of pentacene shows a high mobility of up to 40 cm² V^-1 s^-1, indicating its potential application in organic electronics. However, the photo- and optical instabilities of pentacene make it unsuitable for commercial applications. But, molecular engineering, for both the five-ring-fused building block and side chains, has been performed to improve the stability of materials as well as maintain high mobility. Here, several groups (thiophenes, pyrroles, furans, etc.) are introduced to design and replace one or more benzene rings of pentacene and construct novel five-ring-fused organic semiconductors. In this review article, ∼500 five-ring-fused organic prototype molecules and their derivatives are summarized to provide a general understanding of this catalogue material for application in organic field-effect transistors. The results indicate that many five-ring-fused organic semiconductors can achieve high mobilities of more than 1 cm² V^-1 s^-1, and a hole mobility of up to 18.9 cm² V^-1 s^-1 can be obtained, while an electron mobility of 27.8 cm² V^-1 s^-1 can be achieved in five-ring-fused organic semiconductors. The HOMO-LUMO levels, the synthesis process, the molecular packing, and the side-chain engineering of five-ring-fused organic semiconductors are analyzed. The current problems, conclusions, and perspectives are also provided.

Directed ortho and Remote Metalation-Suzuki-Miyaura Cross Coupling Route to Azafluorenol Core Liquid Crystals

Two new smectic C* mesogens containing a hexyloxy side chain and an azafluorenone (3a) or azafluorenol (3b) core were synthesized using a combined directed ortho metalation-directed remote metalation-Suzuki-Miyaura cross-coupling strategy. 3b was formed in 10 steps and 25% overall yield based on starting benzamide 1a. 3a forms a nematic phase, while 3b forms a smectic A phase. The large temperature range of the smectic phase for the azafluorenol 3b is indicative of mesophase stabilization by intermolecular hydrogen bonding between the hydroxyl group and pyridine nitrogen of neighboring 3b molecules.

Azaisoindigo-Based Polymers with a Linear Hybrid Siloxane-Based Side Chain for High-Performance Semiconductors Processable with Nonchlorinated Solvents

Developing nonchlorinated solvent-processed polymeric semiconductors to avoid environmental concerns and health hazards caused by chlorinated solvents is especially urgent. Here, a molecular design strategy, composed of backbone fluorination and side chain optimization, is used for preparing high-solubility and high-performance azaisoindigo-based polymers. The effects of different backbones and side chains on the solubility, film crystallinity, molecular stacking, and charge transport properties are mainly investigated. A long linear hybrid siloxane-based chain (C₆-Si₇) is chosen to improve the solubility, while the incorporation of fluorine (F) is used to enhance the film crystallinity and charge mobility. By optimizing the backbone and side chain, both solubility and charge mobility of the azaisoindigo-based polymer are significantly improved. As a result, PAIIDBFT-Si films processed with toluene, tetrahydrofuran, ether, and alkanes, achieved charge mobilities of 4.14, 3.78, 2.14, and 2.34 cm² V^-1 s^-1, respectively. The current study provides an effective strategy for the design and synthesis of high-performance polymeric semiconductors processed with nonchlorinated solvents.

The Critical Role of Materials' Interaction in Realizing Organic Field-Effect Transistors Via High-Dilution Blending with Insulating Polymers

High-performance low-band-gap polymer semiconductors are visibly colored, making them unsuitable for transparent and imperceptible electronics without reducing film thickness to the nanoscale range. Herein, we demonstrate polymer/insulator blends exhibiting favorable miscibility that improves the transparency and carrier transport in an organic field-effect transistor (OFET) device. The mesoscale structures leading to more efficient charge transport in ultrathin films relevant to the realization of transparent and flexible electronic applications are explored based on thermodynamic material interaction principles in conjunction with optical and morphological studies. By blending the commodity polymer polystyrene (PS) with two high-performing polymers, PDPP3T and P (NDI2OD-T2) (known as N2200), a drastic difference in morphology and fiber network are observed due to considerable differences in the degree of thermodynamic interaction between the conjugated polymers and PS. Intrinsic material interaction behavior establishes a long-range intermolecular interaction in the PDPP3T polymer fibrillar network dispersed in the majority (80%) PS matrix resulting in a ca. 3-fold increased transistor hole mobility of 1.15 cm² V^-1 s^-1 (highest = 1.5 cm² V^-1 s^-1) as compared to the pristine material, while PS barely affects the electron mobility in N2200. These basic findings provide important guidelines to achieve high mobility in transparent OFETs.

Developments of Diketopyrrolopyrrole-Dye-Based Organic Semiconductors for a Wide Range of Applications in Electronics

In recent times, fused aromatic diketopyrrolopyrrole (DPP)-based functional semiconductors have attracted considerable attention in the developing field of organic electronics. Over the past few years, DPP-based semiconductors have demonstrated remarkable improvements in the performance of both organic field-effect transistor (OFET) and organic photovoltaic (OPV) devices due to the favorable features of the DPP unit, such as excellent planarity and better electron-withdrawing ability. Driven by this success, DPP-based materials are now being exploited in various other electronic devices including complementary circuits, memory devices, chemical sensors, photodetectors, perovskite solar cells, organic light-emitting diodes, and more. Recent developments in the use of DPP-based materials for a wide range of electronic devices are summarized, focusing on OFET, OPV, and newly developed devices with a discussion of device performance in terms of molecular engineering. Useful guidance for the design of future DPP-based materials and the exploration of more advanced applications is provided.

The Effects of Side Chains on the Charge Mobilities and Functionalities of Semiconducting Conjugated Polymers beyond Solubilities

Recent decades have witnessed the rapid development of semiconducting polymers in terms of high charge mobilities and applications in transistors. Significant efforts have been made to develop various conjugated frameworks and linkers. However, studies are increasingly demonstrating that the side chains of semiconducting polymers can significantly affect interchain packing, thin film crystallinity, and thus semiconducting performance. Ways to modify the side alkyl chains to improve the interchain packing order and charge mobilities for conjugated polymers are first discussed. It is shown that modifying the branching chains by moving the branching points away from the backbones can boost the charge mobilities, which can also be improved through partially replacing branching chains with linear ones. Second, the effects of side chains with heteroatoms and functional groups are discussed. The siloxane-terminated side chains are utilized to enhance the semiconducting properties. The fluorinated alkyl chains are beneficial for improving both charge mobility and air stability. Incorporating H bonding group side chains can improve thin film crystallinities and boost charge mobilities. Notably, incorporating functional groups (e.g., glycol, tetrathiafulvalene, and thymine) into side chains can improve the selectivity of field-effect transistor (FET)-based sensors, while photochromic group containing side chains in conjugated polymers result in photoresponsive semiconductors and optically tunable FETs.

Stacking Principles on π- and Lamellar Stacking for Organic Semiconductors Evaluated by Energy Decomposition Analysis

Two stacking manners, that is, π- and lamellar stacking, are generally found for organic semiconductors, in which the π-stacking occurs between conjugated groups and the lamellar stacking refers to the separation of the conjugated and aliphatic moieties. The stacking principles are yet not well-defined. In this work, extended transition state-natural orbitals for chemical valence (ETS-NOCV), an energy decomposition analysis, is utilized to examine the π- and lamellar stacking for a series of naphthalenetetracarboxylic diimide (R-NDI) crystals. The crucial role of dispersion is validated. The perception that π-stacking is merely determined by the conjugated moiety is challenged. The stacking principles are associated with the closest packing model. Nanoscopic phase separation of conjugated and aliphatic moieties and the formation of lamellar and herringbone motifs in the R-NDIs can thus be clarified. Moreover, the interactions between NDI and the alkyl chain are investigated, revealing that the interactions can be significant, being contradictory to the conventional point of view. Along with R-NDIs, additional organic crystals consisting of various conjugated functionalities and substituents are also investigated by ETS-NOCV. The sampling scope is up to 108 conjugated molecules. The dominant role of dispersion force irrespective of the variation in the conjugated moieties and substituents is further confirmed. It is envisaged that the established principles are applicable to other organic semiconductors. The perspective toward the π- and lamellar stacking might be modified, paving the way for ultimate morphological control.

Experimental and Theoretical Investigations of Different Diketopyrrolopyrrole-Based Polymers

Diketopyrrolopyrrole (DPP)-based polymers are often considered as the most promising donor moiety in traditional bulk heterojunction solar cell devices. In this paper, we report the synthesis, characterization of various DPP-based copolymers with different molecular weights, and polydispersity where other aromatic repeating units (phenyl or thiophene based) are connected by alternate double bonds or triple bonds. Some of the copolymers were used for device fabrication and the crucial parameters such as fill factor (FF) and open circuit voltage (V _oc) were calculated. The density functional theory was used to optimize the geometries and deduce highest occupied molecular orbital-lowest unoccupied molecular orbital gaps of all the polymers and theoretically predict their optical and electronic properties. Optical properties of all the polymers, electrochemical properties, and band gaps were also obtained experimentally and compared with the theoretically predicted values.

Modulating Surface Morphology and Thin-Film Transistor Performance of Bi-thieno[3,4-c]pyrrole-4,6-dione-Based Polymer Semiconductor by Altering Preaggregation in Solution

Due to their strong intermolecular interactions, polymer semiconductors aggregate in solution even at elevated temperature. With the aim to study the effect of this kind preaggregation on the order of thin films and further transistor performance, bi-thieno[3,4-c]pyrrole-4,6-dione and fluorinated oligothiophene copolymerized polymer semiconductor P1, which shows strong temperature-dependent aggregation behavior in solution, is synthesized. Its films are deposited through a temperature-controlled dip-coating technique. X-ray diffraction and atomic force microscopy results reveal that the aggregation behavior of P1 in solution affects the microstructures and order of P1 films. The charge transport properties of P1 films are investigated with bottom-gate top-contacted thin-film transistors. The variation of device performance (from 0.014  to 1.03 cm² V^-1 s^-1) demonstrates the importance of optimizing preaggregation degree. The correlation between preaggregation degree and transistor performance of P1 films is explored.

Recent Progress in High-Mobility Organic Transistors: A Reality Check

Over the past three decades, significant research efforts have focused on improving the charge carrier mobility of organic thin-film transistors (OTFTs). In recent years, a commonly observed nonlinearity in OTFT current-voltage characteristics, known as the "kink" or "double slope," has led to widespread mobility overestimations, contaminating the relevant literature. Here, published data from the past 30 years is reviewed to uncover the extent of the field-effect mobility hype and identify the progress that has actually been achieved in the field of OTFTs. Present carrier-mobility-related challenges are identified, finding that reliable hole and electron mobility values of 20 and 10 cm2 V-1 s-1 , respectively, have yet to be achieved. Based on the analysis, the literature is then reviewed to summarize the concepts behind the success of high-performance p-type polymers, along with the latest understanding of the design criteria that will enable further mobility enhancement in n-type polymers and small molecules, and the reasons why high carrier mobility values have been consistently produced from small molecule/polymer blend semiconductors. Overall, this review brings together important information that aids reliable OTFT data analysis, while providing guidelines for the development of next-generation organic semiconductors.

Solid-state organization of n-type carbazole-based semiconductors for organic thin-film transistors

n-Type OTFTs were fabricated and characterised from a series of tricyanovinyl-substituted carbazole-based materials with different N-alkyl chain lengths as active layers. XRD studies gave insights into the main intermolecular interactions, molecular packing motifs and the degree of molecular order in thin films that justified the performance of the devices.

Naphthalene flanked diketopyrrolopyrrole based organic semiconductors for high performance organic field effect transistors

A newly reported alkylated naphthalene flanked DPP monomers without any further functionalization show high hole mobility in OFET devices.

Haptacyclic Carbazole-Based Ladder-Type Nonfullerene Acceptor with Side-Chain Optimization for Efficient Organic Photovoltaics

In this research, a haptacyclic carbazole-based dithienocyclopentacarbazole (DTCC) ladder-type structure was formylated to couple with two 1,1-dicyanomethylene-3-indanone (IC) moieties, forming a new nonfullerene acceptor DTCCIC-C17 using a bulky branched 1-octylnonayl side chain at the nitrogen of the embedded carbazole and four 4-octylphenyl groups at the sp³-carbon bridges. The rigid and coplanar main-chain backbone of the DTCC core provides a broad light-absorbing window and a higher-lying LUMO energy level, whereas the bulky flanked side chains reduce intermolecular interactions, making DTCCIC-C17 amorphous with excellent solution processability. The DTCCIC-C17 as an acceptor is combined with a medium band gap polymer poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) as the donor in the active layer to obtain suitable highest occupied molecular orbital/lowest unoccupied molecular orbital energy alignments and complimentary absorption. The devices with an inverted configuration (ITO/ZnO/active layer/MoO₃/Ag) without using an aqueous poly(3,4-ethylenedioxythiophene) polystyrene sulfonate layer were fabricated for better device stability. When the diiodooctane-treated PBDB-T:DTCCIC-C17 active layer was thermally annealed at 50 °C for 10 min, the device achieved the highest efficiency of 9.48% with a high V_oc of 0.98 V, a J_sc of 14.27 mA cm^-2, and an FF of 0.68.

Synthesis and optical and electrochemical properties of a phenanthrodithiophene (fused-bibenzo[c]thiophene) derivative

We designed and developed a fused-bibenzo[c]thiophene, namely, 2,9-bis(tert-butyldimethylsilyl)phenanthro[9,8-bc:10,1-b'c']dithiophene (PHDT-Si), as a new π-building block in the emitters, photosensitizers and semiconductors for organic optoelectronic devices. Based on photophysical (photoabsorption, fluorescence and time-resolved fluorescence spectroscopy) and electrochemical measurements (cyclic voltammetry), and density functional theory (DFT) calculations, this work reveals that the fused-bibenzo[c]thiophene PHDT-Si, which is prepared by an efficient synthesis method, has a rigid, high planar and expanded π-conjugation structure, and possesses intense photoabsorption and fluorescence properties (λ = 598 nm (ε_max = 41 000 M^-1 cm^-1) and λ = 613 nm (Φ_f = 0.74) in toluene) in the long-wavelength region and undergoes an electrochemically reversible oxidation process, compared to non-fused 1,1'-bis(tert-butyldimethylsilyl)-4,4'-bibenzo[c]thiophene (BBT-Si).

Highly Efficient Inverted D:A1:A2 Ternary Blend Organic Photovoltaics Combining a Ladder-type Non-Fullerene Acceptor and a Fullerene Acceptor

A formylated benzodi(cyclopentadithiophene) (BDCPDT) ladder-type structure with forced coplanarity is coupled with two 1,1-dicyanomethylene-3-indanone (IC) moieties via olefination to form a non-fullerene acceptor, BDCPDT-IC. The BDCPDT-IC, as an acceptor (A₁) with broad light-absorbing ability and excellent solution processability, is combined with a second PC₇₁BM acceptor (A₂) and a medium band gap polymer, PBDB-T, as the donor (D) to form a ternary blend with gradient HOMO/LUMO energy alignments and panchromatic absorption. The device with the inverted architecture using the D:A₁:A₂ ternary blend has achieved a highest efficiency of 9.79% with a superior J_sc of 16.84 mA cm^-2.