PdII2L4-type coordination cages up to three nanometers in size

Preparation, X-ray Characterization, and Reactivity of the Rod-like and Angular Germanium- and Titanium(IV)-Capped Iron(II) Bis-Clathrochelates and Their Mono- and Bis-Capped (Semi)clathrochelate Precursors

Transmetalation of the bis{triethylantimony(V)}-capped iron(II) tris-α-dioximate with n-butylboronic acid afforded the mixed antimony, boron cross-linked clathrochelate with single reactive antimony(V)-based apical fragment. This macrobicyclic precursor easily underwent the transmetalation reactions with germanium and titanium(IV) alkoxides to give the rod-like and angular FeII2MIV-trinuclear bis-clathrochelates. Those of the aforementioned diantimony(V)-capped complex with 3- and 4-carboxyphenylboronic acids afforded the monoboron-capped iron(II) semiclathrochelates, undergoing a double-cyclization (macrobicyclization) with germanium- and titanium(IV)-based capping agents. The reactions in the low-temperature range unexpectedly gave the stable 2:1 associates, formed by the bridging of two carboxyl-terminated macrobicyclic molecules of the mixed carboxylboron, triethylantimony-capped iron(II) clathrochelate with a triethylantimony(V)-based linker fragment. The obtained complexes were characterized using elemental analysis, MALDI-TOF, 1H and 13C{1H} NMR and UV-vis spectra, and single-crystal XRD experiments. The encapsulated iron(II) ion in their 3D-molecules is situated almost in the center of its FeN6-coordination polyhedron possessing a truncated trigonal-pyramidal geometry. Fe-N distances fall in the range 1.887(7)-1.945(4) Å characteristic of the low-spin iron(II) complexes. The cross-linking titanium and germanium(IV) ions in the corresponding bis-clathrochelate molecules form the octahedral MIVO6-coordination polyhedra, the MIV-O distances of which vary from 1.946(2) to 1.964(2) Å and from 1.879(7) to 1.907(6) Å, respectively.

Effects of solvatomorphism, the nature of a chelating ligand synthon and a counterion on the single crystal XRD structure and SMM properties of paramagnetic monocapped cobalt(II) tris-pyrazoloximates

A series of monocapped cobalt(II) tris-pyrazoloximates was obtained through the template condensation of the corresponding pyrazoloxime, phenylboronic acid and a suitable cobalt(II) halogenide. Comparing 3-acetylpyrazoloxime versus its methine-containing homolog, the former produced cobalt(II) clathrochelates in substantially higher yields due to the electron donating effect of the methyl substituent, increasing the N-donor ability of its oxime group. Their less N-donor analog with the electron acceptor trifluoromethyl group did not form cobalt(II) complexes of this type. In all their solvent-free and solvent-containing crystals, the encapsulated cobalt(II) ion adopted a high-spin state, as gauged by the Co-N bond lengths of 2.112(4)-2.188(9) Å, and was located almost in the center of its CoN6-coordination polyhedron. Their CoN6-polyhedra had an almost ideal trigonal-prismatic (TP) geometry with distortion angles φ below 4°. This TP-like geometry was assisted by hydrogen bonding between their NH groups and the apical counterion. The absence of methyl groups makes them close to an ideal TP. In contrast, stronger N-H⋯Cl hydrogen bonds occurred in the methyl-containing complex, while the Co-N bond lengths stayed the same at 2.144(2) Å on average. In its solvates with benzene, chloroform and acetone, there is a clear tendency for φ to decrease from 2.7(3)° to 0.47(13)°. The comparable effects of the ribbed methyl substituents, the cross-linking counterion and the lattice solvent on their molecular geometry were observed; the larger the distortions from an ideal TP geometry, the stronger the hydrogen bonds to the corresponding apical halogenide anion. The analysis of the experimental AC- and DC-magnetometry data for their fine-crystalline samples suggests that the passing from the derivative of the methyl-substituted synthon to that of its methine-containing homolog caused a substantial decrease in the magnetic susceptibility value χT and an increase in the QTM contribution to the magnetic relaxation. The effect of a cross-linking halogenide counteranion on the Orbach remagnetization barrier is greater than that of the solvatomorphism of their crystals.

Heterometallic cages: synthesis and applications

High symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis and drug delivery. Recently there have been increasing efforts to enhance those applications by generating reduced symmetry MSAs. While there are several emerging methods for generating lower symmetry MSAs, this tutorial review examines the general methods used for synthesizing heterometallic MSAs with a particular focus on heterometallic cages. Additionally, the intrinsic properties of the cages and their potential emerging applications as host-guest systems and reaction catalysts are described.

Diastereoselective Self-Assembly of Low-Symmetry Pdn L2n Nanocages through Coordination-Sphere Engineering

Metal-organic cages (MOCs) are popular host architectures assembled from ligands and metal ions/nodes. Assembling structurally complex, low-symmetry MOCs with anisotropic cavities can be limited by the formation of statistical isomer libraries. We set out to investigate the use of primary coordination-sphere engineering (CSE) to bias isomer selectivity within homo- and heteroleptic Pdn L2n cages. Unexpected differences in selectivities between alternative donor groups led us to recognise the significant impact of the second coordination sphere on isomer stabilities. From this, molecular-level insight into the origins of selectivity between cis and trans diastereoisomers was gained, highlighting the importance of both host-guest and host-solvent interactions, in addition to ligand design. This detailed understanding allows precision engineering of low-symmetry MOC assemblies without wholesale redesign of the ligand framework, and fundamentally provides a theoretical scaffold for the development of stimuli-responsive, shape-shifting MOCs.

A Lantern-Shaped Pd(II) Cage Constructed from Four Different Low-Symmetry Ligands with Positional and Orientational Control: An Ancillary Pairings Approach

One of the key challenges of metallo-supramolecular chemistry is to maintain the ease of self-assembly but, at the same time, create structures of increasingly high levels of complexity. In palladium(II) quadruply stranded lantern-shaped cages, this has been achieved through either 1) the formation of heteroleptic (multi-ligand) assemblies, or 2) homoleptic assemblies from low-symmetry ligands. Heteroleptic cages formed from low-symmetry ligands, a hybid of these two approaches, would add an additional rich level of complexity but no examples of these have been reported. Here we use a system of ancillary complementary ligand pairings at the termini of cage ligands to target heteroleptic assemblies: these complementary pairs can only interact (through coordination to a single Pd(II) metal ion) between ligands in a cis position on the cage. Complementarity between each pair (and orthogonality to other pairs) is controlled by denticity (tridentate to monodentate or bidentate to bidentate) and/or hydrogen-bonding capability (AA to DD or AD to DA). This allows positional and orientational control over ligands with different ancillary sites. By using this approach, we have successfully used low-symmetry ligands to synthesise complex heteroleptic cages, including an example with four different low-symmetry ligands.

Effector Regulated Catalytic Cyclization of Alkynoic Acids Using Pt2 L4 Cages

Metabolic pathways are highly regulated by effector molecules that influences the rate of enzymatic reactions. Inspired by the catalytic regulation found in living cells, we report a Pt₂ L₄ cage of which the activity can be controlled by effectors that bind inside the cage. The cage shows catalytic activity in the lactonization of alkynoic acids, with the reaction rates dependent on the effector guest bound in the cage. Some effector guests enhance the rate of the lactonization by up to 19-fold, whereas one decreases it by 5-fold. When mixtures of specific substrates are used, both starting materials and products act as guests for the Pt₂ L₄ cage, enhancing its catalytic activity for one substrate while reducing its activity for the other. The reported regulatory behavior obtained by the addition of effector molecules paves the way to the development of more complex, metabolic-like catalyst systems.

Exploiting Supramolecular Interactions to Control Isomer Distributions in Reduced-Symmetry [Pd2L4]4+ Cages

High-symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis, and drug delivery. Recently, there have been increasing efforts to enhance those applications by generating reduced-symmetry MSAs. Here we report our attempts to use supramolecular (dispersion and hydrogen-bonding) forces and solvophobic effects to generate isomerically pure [Pd₂(L)₄]⁴⁺ cage architectures from a family of new reduced-symmetry ditopic tripyridyl ligands. The reduced-symmetry tripyridyl ligands featured either solvophilic polyether chains, solvophobic alkyl chains, or amino substituents. We show using NMR spectroscopy, high-performance liquid chromatography, X-ray diffraction data, and density functional theory calculations that the combination of dispersion forces and solvophobic effects does not provide any control of the [Pd₂(L)₄]⁴⁺ isomer distribution with mixtures of all four cage isomers (HHHH, HHHT, cis-HHTT, or trans-HTHT, where H = head and T = tail) obtained in each case. More control was obtained by exploiting hydrogen-bonding interactions between amino units. While the cage assembly with a 3-amino-substituted tripyridyl ligand leads to a mixture of all four possible isomers, the related 2-amino-substituted tripyridyl ligand generated a cis-HHTT cage architecture. Formation of the cis-HHTT [Pd₂(L)₄]⁴⁺ cage was confirmed using NMR studies and X-ray crystallography.

Investigating the Conformations of a Family of [M2L3]4+ Helicates Using Single Crystal X-ray Diffraction

We present five new dinuclear triple helicate compounds of types [Mn₂L₃](ClO₄)₄, [Co₂L₃](BF₄)₄, [Ni₂L₃](BF₄)₄, [Cu₂L₃](BF₄)₄, and [Zn₂L₃](BF₄)₄, where L is a previously reported semi-rigid ligand incorporating two α-diimine primary donor groups and two secondary 4-pyridyl donor groups. All complexes have been characterized in both solution and the solid state. Single crystal X-ray diffraction studies were used to probe the variation in the respective helical structures as the coordinated metal ion was altered, including the effect on the orientations of the secondary binding domains. The influence of the metal ion size, the spin state in the case of Fe(II), and the presence of Jahn-Teller distortions on the overall helical structure has been investigated. These results form a basis for the design and construction of new large metallosupramolecular architectures which manifest properties associated with the constituent helical metalloligand units.

Anion-Driven Programmable Chiral Self-Sorting in Metal-Organic Cages and Structural Transformations between Heterochiral and Homochiral Cages

When a racemic mixture of chiral building blocks self-assembles to form discrete molecular or supramolecular cages, the system can adopt either social or narcissistic chiral self-sorting. However, control over such chiral self-sorting is hard to achieve with a desired choice of outcome. Herein, we report anion templated high-fidelity chiral self-sorting during the coordination-driven self-assembly of [Pd₂ L₄ ] metal-organic cages, with a racemic mixture of an axially chiral ligand. Upon varying the counter-anions, the outcome of the choice of chiral self-sorting, whether social or narcissistic, leading to kinetically favored heterochiral or thermodynamically favored homochiral cages, can be controlled through specific anion encapsulation. Non-encapsulating anion afforded a mixture of all possible diastereomers. Anion exchange enabled structural transformations between the diastereomers and the conversion of the mixture of diastereomers into homochiral diastereomers.

Metallosupramolecular cages: from design principles and characterisation techniques to applications

Although metallosupramolecular cages are self-assembled from seemingly simple building blocks, metal ions and organic ligands, architectures of increasingly large size and complexity are accessible and exploited in applications from catalysis to the stabilisation of reactive species. This Tutorial Review gives an introduction to the principles for designing metallosupramolecular cages and highlights advances in the design of large and lower symmetry cages. The characterisation and identification of cages relies on a number of complementary techniques with NMR spectroscopy, mass spectrometry, X-ray crystallography and computational methods being the focus of this review. Finally, examples of cages are discussed where these design principles and characterisation techniques are put into practice for an application or function of the cage.

Heteroleptic tripalladium(II) cages

There is a concerted attempt to develop self-assembled metallo-cages of greater structural complexity, and heteroleptic Pd II cages are emerging as prime candidates in these efforts. Most of these are dinuclear: few examples of higher nuclearity have been reported. We demonstrate here a robust method for the formation of tripalladium(II) cages from the 2:3:3 combination of a tritopic ligand, Pd II , and a selection of ditopic ligands of the correct size and geometry.

Molecular engineering of confined space in metal–organic cages

The host–guest chemistry of metal–organic cages can be modified through tailoring of structural aspects such as size, shape and functionality. In this review, strategies, opportunities and challenges of such molecular engineering are discussed.

Entropy Versus Enthalpy Controlled Temperature/Redox Dual-Triggered Cages for Selective Anion Encapsulation and Release

New C₃ -symmetric imidazole ligands were designed with phosphine and phosphine oxide linkers (L^P and L^PO , respectively) to demonstrate a dual-triggered dynamic closed coordination cage. Both L^P and L^PO form discrete Zn₄ L₄ -closed cages (1^P and 1^PO , respectively) with excellent selectively for BPh₄ ^- , whereas 1^P and 1^PO encapsulate neither a slightly larger size anion [B(C₆ H₄ CH₃ )₄ ^- ] nor smaller size anions (BF₄ ^- , PF₆ ^- , SbF₆ ^- , and OSO₂ CF₃ ^- ). 1^PO exhibits more negative enthalpy and entropy changes upon anion encapsulation, thus releasing almost all of the encapsulated anions at high temperature (343 K) (trigger 1: BPh₄ ^- ⊂1^PO ← → 1^PO +BPh₄ ^- ). In contrast 1^P has less negative enthalpy and entropy changes, thus preserving the captured anion over a wide range of temperatures (298 K to 343 K). The 1^P cage can be quantitatively oxidized to the 1^PO cage by a mild oxidant (Ox.=H₂ O₂ ), and therefore the captured anion can be released by a redox triggering event (trigger 2: BPh₄ ^- ⊂1^P +Ox.→1^PO +BPh₄ ^- ).

A Family of Heterobimetallic Cubes Shows Spin-Crossover Behaviour Near Room Temperature

Using 4-(4'-pyridyl)aniline as a simple organic building block in combination with three different aldehyde components together with metal(II) salts gave three different Fe8 Pt6 -cubes and their corresponding Zn8 Pt6 analogues by employing the subcomponent self-assembly approach. Whereas the use of zinc(II) salts gave rise to diamagnetic cages, iron(II) salts yielded metallosupramolecular cages that show spin-crossover behaviour in solution. The spin-transition temperature T1/2 depends on the incorporated aldehyde component, giving a construction kit for the deliberate synthesis of spin-crossover compounds with tailored transition properties. Incorporation of 4-thiazolecarbaldehyde or N-methyl-2-imidazole-carbaldehyde yielded cages that undergo spin-crossover around room temperature whereas the cage obtained using 1H-4-imidazolecarbaldehyde shows a spin-transition at low temperatures. Three new structures were characterized by synchrotron X-ray diffraction and all structures were characterized by mass spectrometry, NMR and UV/Vis spectroscopy.

Dramatic Effect of A Ring Size of Alicyclic α-Dioximate Ligand Synthons on Kinetics of the Template Synthesis and of the Acidic Decomposition of the Methylboron-Capped Iron(II) Clathrochelates

Kinetics and thermodynamics of the template synthesis and of the acidic decomposition of the methylboron-capped iron(II) tris-1,2-dioximates—the clathrochelate derivatives of six (nioxime)- and eight (octoxime)-membered alicyclic ligand synthons—were compared. In the case of a macrobicyclic iron(II) tris-nioximate, the plausible pathway of its formation contains a rate-determining stage and includes a reversible formation of an almost trigonal-antiprismatic (TAP) protonated tris-complex, followed by its monodeprotonation and addition of CH₃B(OH)₂. Thus, the formed TAP intermediate undergoes a multistep rate-determining stage of double cyclization with the elimination of two water molecules accompanied by a structural rearrangement, thus giving an almost trigonal-prismatic (TP) iron(FII) semiclathrochelate. It easily undergoes a cross-linking with CH₃B(OH)₂, resulting in the elimination of H⁺ ion and in the formation of a macrobicyclic structure. In contrast, the analogous scheme for its macrobicyclic tris-octoximate analog was found to contain up to three initial stages affecting the overall synthesis reaction rate. The rates of acidic decomposition of the above clathrochelates were found to be also affected by the nature of their ribbed substituents. Therefore, the single crystal XRD experiments were performed in order to explain these results. The difference in the kinetic schemes of a formation of the boron-capped iron(II) tris-nioximates and tris-octoximates is explained by necessity of the substantial changes in a geometry of the latter ligand synthon, caused by its coordination to the iron(II) ion, due to both the higher distortion of the FeN₆-coordination polyhedra, and the intramolecular sterical clashes in the molecules of the macrobicyclic iron(II) tris-octoximates.

Structural Flexibility in Metal-Organic Cages

Metal-organic cages (MOCs) have emerged as a diverse class of molecular hosts with potential utility across a vast spectrum of applications. With advances in single-crystal X-ray diffraction and economic methods of computational structure optimisation, cavity sizes can be readily determined. In combination with a chemist's intuition, educated guesses about the likelihood of particular guests being bound within these porous structures can be made. Whilst practically very useful, simple rules-of-thumb, such as Rebek's 55% rule, fail to take into account structural flexibility inherent to MOCs that can allow hosts to significantly adapt their internal cavity. An often unappreciated facet of MOC structures is that, even though relatively rigid building blocks may be employed, conformational freedom can enable large structural changes. If it could be exploited, this flexibility might lead to behavior analogous to the induced-fit of substrates within the active sites of enzymes. To this end, in-roads have already been made to prepare MOCs incorporating ligands with large degrees of conformational freedom. Whilst this may make the constitution of MOCs harder to predict, it has the potential to lead to highly sophisticated and functional synthetic hosts.

Recent advances in heteroleptic multiple-stranded metallosupramolecules

Well-ordered combination of defined coordination spheres and multiple types of ligands (heteroleptic) in a given structure can expand the structural complexity and functional diversity of the resulting metallosupramolecules. Such heteroleptic metallosupramolecular architectures are expected to afford advanced utility in a variety of applications. In this concise review article, recent advances in the development of multi-nuclear-cluster-based heteroleptic multiple-stranded (HLMS) metallosupramolecules are summarized and demonstrated. To construct HLMS metallosupramolecules, one type of multitopic ligands can be employed for building up multiple strands, while another type of ligands can be utilized to construct multi-nuclear clusters. Most HLMS metallosupramolecules adopt helical geometries and have high molecular symmetry, which can be key factors for the structural completion. HLMS metallosupramolecules can be used as basic building blocks for the fabrication of higher-order polymeric or discrete assembly architectures with well-defined geometries.

Multi-functional, Low Symmetry Pd2 L4 Nanocage Libraries*

Although many impressive metallo-supramolecular architectures have been reported, they tend towards high symmetry structures and avoid extraneous functionality to ensure high fidelity in the self-assembly process. This minimalist approach, however, limits the range of accessible structures and thus their potential applications. Herein is described the synthesis of a family of ditopic ligands wherein the ligand scaffolds are both low symmetry and incorporate exohedral functional moieties. Key to this design is the use of CuI -catalysed azide-alkyne cycloaddition (CuAAC) chemistry, as the triazole is capable of acting as both a coordinating heterocycle and a tether between the ligand framework and functional unit simultaneously. A common precursor was used to generate ligands with various functionalities, allowing control of electronic properties whilst maintaining the core structure of the resultant cis-Pd2 L4 nanocage assemblies. The isostructural nature of the scaffold frameworks enabled formation of combinatorial libraries from the self-assembly of ligand mixtures, generating a statistical mixture of multi-functional, low symmetry architectures.

Identification of a Heteroleptic Pd6L6L'6 Coordination Cage by Screening of a Virtual Combinatorial Library

The design of structurally defined heteroleptic coordination cages is a challenging task, and only few examples are known to date. Here we describe a selection approach that allowed the identification of a novel hexanuclear Pd cage containing two types of dipyridyl ligands. A virtual combinatorial library of [Pd_nL_2n](BF₄)_2n complexes was prepared by mixing six different dipyridyl ligands with substoichiometric amounts of [Pd(CH₃CN)₄](BF₄)₂. Analysis of the equilibrated reaction mixture revealed the preferential formation of a heteroleptic [Pd₆L₆L'₆](BF₄)₁₂ assembly. The complex was prepared on a preparative scale by a targeted synthesis, and its structure was elucidated by single-crystal X-ray diffraction. It features an unprecedented trigonal-antiprismatic cage structure with two triangular Pd₃L₃ macrocycles bridged by six L' ligands. A related but significantly larger [Pd₆L₆L'₆](BF₄)₁₂ cage was obtained by using metalloligands instead of organic dipyridyl ligands.

One-dimensional and two-dimensional coordination polymers from cluster modular construction

Cluster module construction of W/Cu/S cluster-based coordination polymers and their third-order NLO properties were investigated.

Coordination Self-Assembly Processes Revealed by Collaboration of Experiment and Theory: Toward Kinetic Control of Molecular Self-Assembly

The importance of the collaboration of experiment and theory has been proven in many examples in science and technology. Here, such a new example is shown in the investigation of molecular self-assembly process, which is a complicated multi-step chemical reaction occurring in the reaction network composed of a huge number of intermediates. An experimental method, QASAP (quantitative analysis of self-assembly process), developed by us and a numerical approach, NASAP (numerical analysis of self-assembly process), that analyzes the experimental data obtained by QASAP to draw detail molecular self-assembly pathways, which was also developed by us, are introduced, and their application to the investigation of Pd(II)-mediated coordination assemblies are presented. Further, the possibility of the prediction of the outcomes of molecular self-assembly by varying the reaction conditions is also demonstrated. Finally, a future direction in the field of artificial molecular self-assembly based on pathway-dependent self-assembly, that is, kinetic control of molecular self-assembly is discussed.

Two-Step Synthesis of Linear and Bent Dicarboxylic Acid Metalloligands with Lengths of up to 3 nm

Nanometer-sized polycarboxylate ligands are interesting building blocks for metallasupramolecular chemistry, but access to these compounds is often limited by complicated synthetic pathways. Here, we describe a simple two-step protocol, which allows preparing linear and bent dicarboxylate ligands with lengths of up to 3 nm from commercially available compounds. The ligands are prepared by iron-templated polycondensation reactions involving arylboronic acids and nioxime. The final products contain two iron clathrochelate complexes and two terminal carboxyphenylene groups. To demonstrate that the new ligands are suitable for the construction of more complex molecular nanostructures, we have prepared a Cu-based metal-organic polyhedron, which represents the largest M₄L₄ cage described so far.

Solvent-Induced Encapsulation of Cobalt(II) Ion by a Boron-Capped tris-Pyrazoloximate

Boron-cross-linked cobalt(II) pseudoclathrochelate was obtained by the template reaction of 2-acetylpyrazoloxime, phenylboronic acid, and a new DMF cobalt(II) solvato complex with a decachloro-closo-decaborate dianion. As confirmed by single-crystal X-ray diffraction, this complex crystallizes with two symmetry-independent cobalt(II) pseudoclathrochelate cations, one decachloro-closo-decaborate dianion, one benzene, one dichloromethane solvent molecule, and two molecules of DMF. The latter act as pseudocapping fragments to the monocapped tris-pyrazoloximate ligands by forming N-H···O hydrogen bonds with their pyrazole groups. The Co^IIN₆-coordination polyhedra adopt a nearly ideal TP geometry with distortion angles φ equal to 1.22(16) and 2.58(17)° for two symmetry-independent pseudoclathrochelate cations, both containing the encapsulated cobalt(II) ion in its high-spin state (Co-N 2.115(4)-2.198(3) Å). Magnetic properties of this complex were studied both by dc-magnetometry and by solution-state NMR spectroscopy to reveal a high magnetic anisotropy, thus suggesting a large magnetic susceptibility tensor anisotropy (25.8 × 10^-32 m³ at 298 K) and a large negative zero-field splitting energy (-85 cm^-1). The results of magnetometry studies in the ac magnetic field suggest a single molecule magnet behavior of this TP complex with an effective magnetization reversal barrier of approximately 130 cm^-1. Its pseudocapping DMF molecules that form H-bonds with tris-pyrazoloximate fragments are easy to substitute by strong H-bond acceptors, such as chloride ions and di- and tetramethylureas, thus affecting the magnetic properties of a whole pseudomacrobicyclic paramagnetic system.

Dynamic Complex-to-Complex Transformations of Heterobimetallic Systems Influence the Cage Structure or Spin State of Iron(II) Ions

Two new heterobimetallic cages, a trigonal‐bipyramidal and a cubic one, were assembled from the same mononuclear metalloligand by adopting the molecular library approach, using iron(II) and palladium(II) building blocks. The ligand system was designed to readily assemble through subcomponent self‐assembly. It allowed the introduction of steric strain at the iron(II) centres, which stabilizes its paramagnetic high‐spin state. This steric strain was utilized to drive dynamic complex‐to‐complex transformations with both the metalloligand and heterobimetallic cages. Addition of sterically less crowded subcomponents as a chemical stimulus transformed all complexes to their previously reported low‐spin analogues. The metalloligand and bipyramid incorporated the new building block more readily than the cubic cage, probably because the geometric structure of the sterically crowded metalloligand favours the cube formation. Furthermore it was possible to provoke structural transformations upon addition of more favourable chelating ligands, converting the cubic structures into bipyramidal ones.

Long-cavity [Pd2L4]4+ cages and designer 1,8-naphthalimide sulfonate guests: rich variation in affinity and differentiated binding stoichiometry

Long cavity dual domain [Pd₂L₄]⁴⁺ cages bind long, dual domain guests, with tunable binding affinities and stoichiometries.

A new supramolecular catalytic system: the self-assembly of Rh8 cage host anthracene molecules for [4 + 4] cycloaddition induced by UV irradiation

The supramolecular assembly is significant in host–guest chemistry. In this work, a new supramolecular system assembled through a distorted cuboid was introduced. Moreover, the [4 + 4] cycloaddition reaction of the guest molecules was further studied under UV light.

Conformational control of Pd2L4 assemblies with unsymmetrical ligands

With increasing interest in the potential utility of metallo-supramolecular architectures for applications as diverse as catalysis and drug delivery, the ability to develop more complex assemblies is keenly sought after. Despite this, symmetrical ligands have been utilised almost exclusively to simplify the self-assembly process as without a significant driving foa mixture of isomeric products will be obtained. Although a small number of unsymmetrical ligands have been shown to serendipitously form well-defined metallo-supramolecular assemblies, a more systematic study could provide generally applicable information to assist in the design of lower symmetry architectures. Pd2L4 cages are a popular class of metallo-supramolecular assembly; research seeking to introduce added complexity into their structure to further their functionality has resulted in a handful of examples of heteroleptic structures, whilst the use of unsymmetrical ligands remains underexplored. Herein we show that it is possible to design unsymmetrical ligands in which either steric or geometric constraints, or both, can be incorporated into ligand frameworks to ensure exclusive formation of single isomers of three-dimensional Pd2L4 metallo-supramolecular assemblies with high fidelity. In this manner it is possible to access Pd2L4 cage architectures of reduced symmetry, a concept that could allow for the controlled spatial segregation of different functionalities within these systems. The introduction of steric directing groups was also seen to have a profound effect on the cage structures, suggesting that simple ligand modifications could be used to engineer structural properties.

Dynamic Open Coordination Cage from Nonsymmetrical Imidazole-Pyridine Ditopic Ligands for Turn-On/Off Anion Binding

This work demonstrates a new nonconventional ligand design, imidazole/pyridine-based nonsymmetrical ditopic ligands (1 and 1^S ), to construct a dynamic open coordination cage from nonsymmetrical building blocks. Upon complex formation with Pd²⁺ at a 1:4 molar ratio, 1 and 1^S initially form mononuclear PdL₄ complexes (Pd²⁺ (1)₄ and Pd²⁺ (1^S )₄ ) without formation of a cage. The PdL₄ complexes undergo a stoichiometrically controlled structural transition to Pd₂ L₄ open cages ((Pd²⁺ )₂ (1)₄ and (Pd²⁺ )₂ (1^S )₄ ) capable of anion binding, leading to turn-on anion binding. The structural transitions between the Pd₂ L₄ open cage and the PdL₄ complex are reversible. Thus, stoichiometric addition (2 equiv) of free 1^S to the (Pd²⁺ )₂ (1^S )₄ open cage holding a guest anion ((Pd²⁺ )₂ (1^S )₄ ⋅G^- ) enables the structural transition to the Pd²⁺ (1^S )₄ complex, which does not have a cage and thus causes the release of the guest anion (Pd²⁺ (1^S )₄ +G^- ).

Anion Pairs Template a Trigonal Prism with Disilver Vertices

Here we describe the formation of a trigonal prismatic cage, utilizing 2-formyl-1,8-naphthyridine subcomponents to bind pairs of silver(I) ions in close proximity. This cage is the first example of a new class of subcomponent self-assembled polyhedral structures having bimetallic vertices, as opposed to the single metal centers that typically serve as structural elements within such cages. Our new cage self-assembles around a pair of anionic templates, which are shown by crystallographic and solution-phase data to bind within the central cavity of the structure. Many different anions serve as competent templates and guests. Elongated dianions, such as the strong oxidizing agent peroxysulfate, also serve to template and bind within the cavity of the prism. The principle of using subcomponents that have more than one spatially close, but nonchelating, binding site may thus allow access to other higher-order structures with multimetallic vertices.

Pd(II) Coordination Sphere Engineering: Pyridine Cages, Quinoline Bowls, and Heteroleptic Pills Binding One or Two Fullerenes

Fullerenes and their derivatives are of tremendous technological relevance. Synthetic access and application are still hampered by tedious purification protocols, peculiar solubility, and limited control over regioselective derivatization. We present a modular self-assembly system based on a new low-molecular-weight binding motif, appended by two palladium(II)-coordinating units of different steric demands, to either form a [Pd₂L¹₄]⁴⁺ cage or an unprecedented [Pd₂L²₃(MeCN)₂]⁴⁺ bowl (with L¹ = pyridyl, L² = quinolinyl donors). The former was used as a selective induced-fit receptor for C₆₀. The latter, owing to its more open structure, also allows binding of C₇₀ and fullerene derivatives. By exposing only a fraction of the bound guests’ surface, the bowl acts as fullerene protecting group to control functionalization, as demonstrated by exclusive monoaddition of anthracene. In a hierarchical manner, sterically low-demanding dicarboxylates were found to bridge pairs of bowls into pill-shaped dimers, able to host two fullerenes. The hosts allow transferring bound fullerenes into a variety of organic solvents, extending the scope of possible derivatization and processing methodologies.

Porous networks based on iron(ii) clathrochelate complexes

Microporous networks based on boronate ester-capped iron(ii) clathrochelate complexes are described. The networks were obtained by covalent cross-linking of tetrabrominated clathrochelate complexes via Suzuki-Miyaura polycross-coupling reactions with diboronic acids, or by Sonogashira-Hagihara polycross-coupling of clathrochelate complexes with terminal alkyne functions and 1,3,5-tribromobenzene. The networks display permanent porosity with apparent Brunauer-Emmett-Teller surface areas of up to SABET = 593 m2 g-1. A clathrochelate complex based on an enantiopure dioximato ligand was used to prepare chiral networks. One of these networks was shown to preferentially absorb d-tryptophan over l-tryptophan.

Structure-switching M3L2 Ir(iii) coordination cages with photo-isomerising azo-aromatic linkers

Cyclotriguaiacylene has been functionalised with 3- or 4-pyridyl-azo-phenyl groups to form a series of molecular hosts with three azobenzene-type groups that exhibit reversible photo-isomerisation. Reaction of the host molecules with [Ir(C^N)2(NCMe)2]+ where C^N is the cyclometallating 2-phenylpyridinato, 2-(4-methylphenyl)pyridinato or 2-(4,5,6-trifluorophenyl)pyridinato results in the self-assembly of a family of five different [{Ir(C^N)2}3(L)2]3+ coordination cages. Photo-irradiation of each of the cages with a high energy laser results in E → Z photo-isomerisation of the pyridyl-azo-phenyl groups with up to 40% of groups isomerising. Isomerisation can be reversed by exposure to blue light. Thus, the cages show reversible structure-switching while maintaining their compositional integrity. This represents the largest photo-induced structural change yet reported for a structurally-integral component of a coordination cage. Energy minimised molecular models indicate a switched cage has a smaller internal space than the initial all-E isomer. The [Ir(C^N)2(NCMe)2]+ cages are weakly emissive, each with a deep blue luminescence at ca. 450 nm.