How cracks are hot and cool: a burning issue for paper

Heat Emitting Damage in Skin: A Thermal Pathway for Mechanical Algesia

Mechanical pain (or mechanical algesia) can both be a vital mechanism warning us for dangers or an undesired medical symptom important to mitigate. Thus, a comprehensive understanding of the different mechanisms responsible for this type of pain is paramount. In this work, we study the tearing of porcine skin in front of an infrared camera, and show that mechanical injuries in biological tissues can generate enough heat to stimulate the neural network. In particular, we report local temperature elevations of up to 24°C around fast cutaneous ruptures, which shall exceed the threshold of the neural nociceptors usually involved in thermal pain. Slower fractures exhibit lower temperature elevations, and we characterise such dependency to the damaging rate. Overall, we bring experimental evidence of a novel—thermal—pathway for direct mechanical algesia. In addition, the implications of this pathway are discussed for mechanical hyperalgesia, in which a role of the cutaneous thermal sensors has priorly been suspected. We also show that thermal dissipation shall actually account for a significant portion of the total skin's fracture energy, making temperature monitoring an efficient way to detect biological damages.

Thermally activated intermittent dynamics of creeping crack fronts along disordered interfaces

We present a subcritical fracture growth model, coupled with the elastic redistribution of the acting mechanical stress along rugous rupture fronts. We show the ability of this model to quantitatively reproduce the intermittent dynamics of cracks propagating along weak disordered interfaces. To this end, we assume that the fracture energy of such interfaces (in the sense of a critical energy release rate) follows a spatially correlated normal distribution. We compare various statistical features from the obtained fracture dynamics to that from cracks propagating in sintered polymethylmethacrylate (PMMA) interfaces. In previous works, it has been demonstrated that such an approach could reproduce the mean advance of fractures and their local front velocity distribution. Here, we go further by showing that the proposed model also quantitatively accounts for the complex self-affine scaling morphology of crack fronts and their temporal evolution, for the spatial and temporal correlations of the local velocity fields and for the avalanches size distribution of the intermittent growth dynamics. We thus provide new evidence that an Arrhenius-like subcritical growth is particularly suitable for the description of creeping cracks.

Thermal dissipation as both the strength and weakness of matter. A material failure prediction by monitoring creep

In any domain involving some stressed solids, that is, from seismology to general engineering, the strength of matter is a paramount feature to understand. We here discuss the ability of a simple thermally activated sub-critical model, which includes the auto-induced thermal evolution of cracks tips, to predict the catastrophic failure of a vast range of materials. It is in particular shown that the intrinsic surface energy barrier, for breaking the atomic bonds of many solids, can be easily deduced from the slow creeping dynamics of a crack. This intrinsic barrier is however higher than the macroscopic load threshold at which brittle matter brutally fails, possibly as a result of thermal activation and of a thermal weakening mechanism. We propose a novel method to compute this macroscopic energy release rate of rupture, Ga, solely from monitoring slow creep, and we show that this reproduces the experimental values within 50% accuracy over twenty different materials, and over more than four decades of fracture energy.

How heat controls fracture: the thermodynamics of creeping and avalanching cracks

While of paramount importance in material science, the dynamics of cracks still lacks a complete physical explanation. The transition from their slow creep behavior to a fast propagation regime is a notable key, as it leads to full material failure if the size of a fast avalanche reaches that of the system. We here show that a simple thermodynamics approach can actually account for such complex crack dynamics, and in particular for the non-monotonic force-velocity curves commonly observed in mechanical tests on various materials. We consider a thermally activated failure process that is coupled with the production and the diffusion of heat at the fracture tip. In this framework, the rise in temperature only affects the sub-critical crack dynamics and not the mechanical properties of the material. We show that this description can quantitatively reproduce the rupture of two different polymeric materials (namely, the mode I opening of polymethylmethacrylate (PMMA) plates, and the peeling of pressure sensitive adhesive (PSA) tapes), from the very slow to the very fast fracturing regimes, over seven to nine decades of crack propagation velocities. In particular, the fastest regime is obtained with an increase of temperature of thousands of Kelvins, on the molecular scale around the crack tip. Although surprising, such an extreme temperature is actually consistent with different experimental observations that accompany the fast propagation of cracks, namely, fractoluminescence (i.e., the emission of visible light during rupture) and a complex morphology of post-mortem fracture surfaces, which could be due to the sublimation of bubbles.

Crack growth and energy dissipation in paper

Here, we follow the stable propagation of a roughening crack using simultaneously Digital Image Correlation and Infra-Red imaging. In a quasi-two-dimensional paper sample, the crack tip and ahead of that the fracture process zone follow the slowly, diffusively moving “hot spot” ahead of the tip. This also holds when the crack starts to roughen during propagation. The well-established intermittency of the crack advancement and the roughening of the crack in paper are thus subject to the dissipation and decohesion in the hot spot zone. They are therefore not only a result of the depinning of the crack in a heterogeneous material.

Thermally activated crack fronts propagating in pinning disorder: simultaneous brittle/creep behaviour depending on scale

We study theoretically the propagation of a crack front in mode I along an interface in a disordered elastic medium, with a numerical model considering a thermally activated rheology, toughness disorder and long-range elastic interactions. This model reproduces not only the large-scale dynamics of the crack front position in fast or creep loading regimes, but also the small-scale self-affine behaviour of the front. Two different scaling laws are predicted for the front morphology, with a Hurst exponent of 0.5 at small scales and a logarithmic scaling law at large scales, consistently with experiments. The prefactor of these scaling laws is expressed as a function of the temperature, and of the quenched disorder characteristics. The cross-over between these regimes is expressed as a function of the quenched disorder amplitude, and is proportional to the average energy release rate, and to the inverse of temperature. This model captures as well the experimentally observed local velocity fluctuation probability distribution, with a high-velocity tail P(v)∼v -2.6 This feature is shown to arise when the quenched disorder is sufficiently large, whereas smaller toughness fluctuations lead to a lognormal-like velocity distribution. Overall, the system is shown to obey a scaling determined by two distinct mechanisms as a function of scale: namely, the large scales display fluctuations similar to an elastic line in an annealed noise excited as the average front travels through the pinning landscape, while small scales display a balance between thresholds in possible elastic forces and quenched disorder.This article is part of the theme issue 'Statistical physics of fracture and earthquakes'.

Three-dimensional visualization and quantification of the fracture mechanisms in sparse fibre networks using multiscale X-ray microtomography

The structural changes that are induced by the initiation and the propagation of a crack in a low-density paper (LDP) were studied using single edge-notched fracture tests that were imaged under an optical microscope or in laboratory or synchrotron X-ray microtomographs. The two-dimensional optical images were used to analyse the links between the mesoscale structural variations of LDP and the crack path. Medium-resolution X-ray three-dimensional images were used to analyse the variations in the thickness and local porosity of samples as well as their displacement field that were induced by the LDP fracture. High-resolution three-dimensional images showed that these mesostructural variations were accompanied by complex fibre and bond deformation mechanisms that were, for the first time, in situ imaged. These mechanisms occurred in the fracture process zone that developed ahead of the crack tip before the crack path became distinct and visible. They were at the origin of the aforementioned thickness variations that developed more particularly along the crack path. They eventually led to fibre–fibre bond detachment phenomena and crack propagation through the fibrous network. These results can be used to enhance the current structural and mechanical models for the prediction of the fracture behaviour of papers.

Non-equilibrium cytoquake dynamics in cytoskeletal remodeling and stabilization

The cytoskeleton (CSK) is a tensed fiber framework that supports, shapes and stabilizes the cell. The CSK is in a constant state of remodeling, moreover, which is an active non-equilibrium thermodynamic process. We report here that cytoskeletal remodeling involves reconfigurations that are not only sudden but also are transmitted to great distances within the cell in a fashion reminiscent of quakes in the Earth's crust. Remarkably, these events in the cell conform both qualitatively and quantitatively to empirical laws typical of earthquakes, including hierarchical fault structures, cumulative energy distributions following the Gutenberg-Richter law, and rate of after-shocks following Omori's law. While it is well-established that remodeling and stabilization of the cytoskeleton are non-equilibrium process, these new unanticipated observations establish that these processes are also remarkably non-local and strongly cooperative.

Predicting sample lifetimes in creep fracture of heterogeneous materials

Materials flow-under creep or constant loads-and, finally, fail. The prediction of sample lifetimes is an important and highly challenging problem because of the inherently heterogeneous nature of most materials that results in large sample-to-sample lifetime fluctuations, even under the same conditions. We study creep deformation of paper sheets as one heterogeneous material and thus show how to predict lifetimes of individual samples by exploiting the "universal" features in the sample-inherent creep curves, particularly the passage to an accelerating creep rate. Using simulations of a viscoelastic fiber bundle model, we illustrate how deformation localization controls the shape of the creep curve and thus the degree of lifetime predictability.

Note: Localization based on estimated source energy homogeneity

Acoustic signal localization is a complex problem with a wide range of industrial and academic applications. Herein, we propose a localization method based on energy attenuation and inverted source amplitude comparison (termed estimated source energy homogeneity, or ESEH). This inversion is tested on both synthetic (numerical) data using a Lamb wave propagation model and experimental 2D plate data (recorded with 4 accelerometers sensitive up to 26 kHz). We compare the performance of this technique with classic source localization algorithms: arrival time localization, time reversal localization, and localization based on energy amplitude. Our technique is highly versatile and out-performs the conventional techniques in terms of error minimization and cost (both computational and financial).