Optical control of surface forces and instabilities in foam films using photosurfactants

Interfacial Flows and Interfacial Shape Modulation Controlled by the Thermal Action of Light Energy

The review covers the research on thermocapillary convection caused by the thermal action of laser radiation in single-layer and bilayer liquid systems of capillary thickness. The advantages of using optical radiation are the instantaneous delivery of thermal energy to a place on demand (a bulk phase, interfaces); low radiation power required; concentrating heat flux on a spot of a few micrometers; the production of arbitrary spatial distributions of radiation intensity; and, as a result, corresponding thermal fields at a liquid interface and their fast reconfiguration. Thermocapillary stresses at the liquid interfaces lead to the transfer of the liquid and a change in the shape of the interface, in accordance with the distribution of the light-induced thermal field. Studies concerned with the methods of non-destructive testing of liquid media and solids, which are based on a photothermocapillary signal emitted by a laser-induced concave deformation of a thin layer, are considered. Features of thermocapillary deformation of a liquid–air interface caused by local heating of thin and thick (exceeding the capillary length) layers are demonstrated. A part of the review addresses the results of the study of thermocapillary rupture of films in the heating zone and the application of this effect in semiconductor electronics and high-resolution lithography. The works on the light-induced thermocapillary effect in bilayer (multilayer) liquid systems are analyzed, including early works on image recording liquid layer systems, liquid IR transducers, and nonlinear optical media.

Influence of Polarity Change and Photophysical Effects on Photosurfactant-Driven Wetting

Photosurfactants have shown considerable promise for enabling stimuli-responsive control of the properties and motion of fluid interfaces. Recently, a number of photoswitch chemistries have emerged to tailor the photoresponsive properties of photosurfactants. However, systematic studies investigating how photoresponsive surfactant behavior depends on the photochemical and photophysical properties of the switch remain scarce. In this work, we develop synthetic schemes and surfactant designs to produce a well-controlled library of photosurfactants to comparatively assess the behavior of photoswitch chemistry on interfacial behavior. We employ photoinduced spreading of droplets at fluid interfaces as a model for such studies. We show that although photosurfactant response is largely guided by expected trends with changes in polarity of the photoswitch, interfacial behavior also depends nontrivially and sometimes counter-intuitively on the kinetics and mechanisms of photoswitching, particularly at the interface of two solvents, as well as on complex interactions with other surfactants. Understanding these complexities enables the design of new photosurfactant systems and their optimization toward responsive functions including triggered spreading, dewetting, and destabilization of droplets on solid and fluid surfaces.

Self-Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Amphiphilic molecules, comprising hydrophobic and hydrophilic moieties and the intrinsic propensity to self-assemble in aqueous environment, sustain a fascinating spectrum of structures and functions ranging from biological membranes to ordinary soap. Facing the challenge to design responsive, adaptive, and out-of-equilibrium systems in water, the incorporation of photoresponsive motifs in amphiphilic molecular structures offers ample opportunity to design supramolecular systems that enables functional responses in water in a non-invasive way using light. Here, we discuss the design of photoresponsive molecular amphiphiles, their self-assembled structures in aqueous media and at air-water interfaces, and various approaches to arrive at adaptive and dynamic functions in isotropic and anisotropic systems, including motion at the air-water interface, foam formation, reversible nanoscale assembly, and artificial muscle function. Controlling the delicate interplay of structural design, self-assembling conditions and external stimuli, these responsive amphiphiles open several avenues towards application such as soft adaptive materials, controlled delivery or soft actuators, bridging a gap between artificial and natural dynamic systems.

Wet-etched asymmetric spherical nanoparticles with controllable pit structures and application in non-aqueous foams

The structure of colloidal particles is one of the factors that significantly affect their properties. Asymmetrical spherical particles with pit structures were prepared by using NH₄F to perform wet chemical etching on the designated positions of the partially masked particles. The depth and effectiveness of the pits were adjusted by varying the etching time. By changing the properties of the oil mixture, the oil repellency and foaming ability of the etched particles were characterized and compared. By controlling the wet etching time, the effective pit structures were etched on the particles. Within 10 d of being etched, the particles with pit geometry showed better foam properties than the original unetched particles. The pit structure on the particles improves the oil repellency of the particles in a series of oil mixtures with relatively lower surface tension. No significant difference was observed between the under-etched (18 h) particles and the non-etched particles. The ineffective geometry of the over-etched (15 d) particles results in insufficient robustness of the Cassie-Baxter state of the particles and reduces the volume of the generated foam.

Photo-Isomerization Kinetics of Azobenzene Containing Surfactant Conjugated with Polyelectrolyte

Ionic complexation of azobenzene-containing surfactants with any type of oppositely charged soft objects allows for making them photo-responsive in terms of their size, shape and surface energy. Investigation of the photo-isomerization kinetic and isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged objects is a necessary prerequisite for understanding the structural response of photo-sensitive complexes. Here, we report on photo-isomerization kinetics of a photo-sensitive surfactant in the presence of poly(acrylic acid, sodium salt). We show that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in aqueous solution. In a photo-stationary state, the ratio between the trans and cis isomers is shifted to a higher trans-isomer concentration for all irradiation wavelengths. This is explained by the formation of surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration and inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates.

Spiropyran Sulfonates for Photo- and pH-Responsive Air-Water Interfaces and Aqueous Foam

Responsive foams and interfaces are interesting building blocks for active materials that respond and adapt to external stimuli. We have used the photochromic reaction of a spiropyran sulfonate surfactant to render interfacial, rising bubbles as well as foaming properties active to light stimuli. In order to address the air-water interface on a molecular level, we have applied sum-frequency generation (SFG) spectroscopy which has provided qualitative information on the surface excess and the interfacial charging state as a function of light irradiation and solution pH. Under blue light irradiation, the surfactant forms a closed ring spiro form (SP), whereas under dark conditions the ring opens and the merocyanine (MC) form is generated. Using SFG spectroscopy, we show that at the interface, different pH conditions of the bulk solution lead to changes in the interfacial charging state. We have exploited the fact that the MC surfactant's O-H group can be deprotonated as a function of pH and used that to tune the molecules net charge at the interface. In fact, SFG spectroscopy shows that with increasing pH the intensity of the O-H stretching band from interfacial water molecules increases, which we associate to an increase in surface net charge. At a pH of 5.3, irradiation with blue light leads to a reversible decrease of O-H intensities, whereas the C-H intensities were unchanged compared to the corresponding intensities under dark conditions. These results are indicative of changes in the surface net charge with light irradiation, which are also expected to influence the foam stability via changes in the electrostatic disjoining pressure. In fact, measurements of the foam stabilities are consistent with this hypothesis and show higher foam stability under dark conditions. At pH 2.7 this behavior is reversed as far as the surface tension and surface charging as well as the foam stability are concerned. This is corroborated by rising bubble experiments, which demonstrated an unprecedented reduction of ∼30% in bubble velocity when the bubbles were irradiated with blue light compared to the velocity of bubbles with the surfactants in the dark state. Clearly, the light-triggered changes can be used to control foams, rising bubbles, and fluid interfaces on a molecular level which renders them active to light stimuli.

Dynamic Assemblies of Molecular Motor Amphiphiles Control Macroscopic Foam Properties

Stimuli-responsive supramolecular assemblies controlling macroscopic transformations with high structural fluidity, i.e., foam properties, have attractive prospects for applications in soft materials ranging from biomedical systems to industrial processes, e.g., textile coloring. However, identifying the key processes for the amplification of molecular motion to a macroscopic level response is of fundamental importance for exerting the full potential of macroscopic structural transformations by external stimuli. Herein, we demonstrate the control of dynamic supramolecular assemblies in aqueous media and as a consequence their macroscopic foam properties, e.g., foamability and foam stability, by large geometrical transformations of dual light/heat stimuli-responsive molecular motor amphiphiles. Detailed insight into the reversible photoisomerization and thermal helix inversion at the molecular level, supramolecular assembly transformations at the microscopic level, and the stimuli-responsive foam properties at the macroscopic level, as determined by UV-vis absorption and NMR spectroscopies, electron microscopy, and foamability and in situ surface tension measurements, is presented. By selective use of external stimuli, e.g., light or heat, multiple states and properties of macroscopic foams can be controlled with very dilute aqueous solutions of the motor amphiphiles (0.2 weight%), demonstrating the potential of multiple stimuli-responsive supramolecular systems based on an identical molecular amphiphile and providing opportunities for future soft materials.

Unexpected monolayer-to-bilayer transition of arylazopyrazole surfactants facilitates superior photo-control of fluid interfaces and colloids

Interfaces that can change their chemistry on demand have huge potential for applications and are prerequisites for responsive or adaptive materials. We report on the performance of a newly designed n-butyl-arylazopyrazole butyl sulfonate (butyl-AAP-C4S) surfactant that can change its structure at the air-water interface by E/Z photo-isomerization in an unprecedented way. Large and reversible changes in surface tension (Δγ = 27 mN m-1) and surface excess (ΔΓ > 2.9 μmol m-2) demonstrate superior performance of the butyl-AAP-C4S amphiphile to that of existing ionic surfactants. Neutron reflectometry and vibrational sum-frequency generation spectroscopy reveal that these large changes are caused by an unexpected monolayer-to-bilayer transition. This exceptional behavior is further shown to have dramatic consequences at larger length scales as highlighted by applications like the light-triggered collapse of aqueous foam which is tuned from high (>1 h) to low (<10 min) stabilities and light-actuated particle motion via Marangoni flows.

Kinetics of photo-isomerization of azobenzene containing surfactants

We report on photoisomerization kinetics of azobenzene containing surfactants in aqueous solution. The surfactant molecule consists of a positively charged trimethylammonium bromide head group, a hydrophobic spacer connecting via 6 to 10 CH₂ groups to the azobenzene unit, and the hydrophobic tail of 1 and 3CH₂ groups. Under exposure to light, the azobenzene photoisomerizes from more stable trans- to metastable cis-state, which can be switched back either thermally in dark or by illumination with light of a longer wavelength. The surfactant isomerization is described by a kinetic model of a pseudo first order reaction approaching equilibrium, where the intensity controls the rate of isomerization until the equilibrated state. The rate constants of the trans-cis and cis-trans photoisomerization are calculated as a function of several parameters such as wavelength and intensity of light, the surfactant concentration, and the length of the hydrophobic tail. The thermal relaxation rate from cis- to trans-state is studied as well. The surfactant isomerization shows a different kinetic below and above the critical micellar concentration of the trans isomer due to steric hindrance within the densely packed micelle but does not depend on the spacer length.

Light and latex: advances in the photochemistry of polymer colloids

Unparalleled temporal and spatial control of colloidal chemical processes introduces immense potential for the manufacturing, modification, and manipulation of latex particles.

Tunable Spreading and Shrinking on Photocontrolled Liquid Substrate

Droplets of n-hexadecane were observed to shrink under ultraviolet (365 nm) and spread under blue light (475 nm) irradiation on an aqueous solution of photosensitive surfactant AzoTAB. We demonstrate that the change of wettability of n-hexadecane droplet on the solution depends on the change of oil-water interface tension. According to the addition of ethanol into the substrate, the change of relative diameter ΔD/D exceeds 20%, much larger than the system without ethanol. With light-emitting diode (LED) light as a sole power source, without any other triggers, we provide a contactless and isothermal method to realize photocontrolled alternative spreading and shrinking of a droplet on a liquid surface, which provides a basis for a chromocapillary-based optical zoom liquid lens.

Smart Air-Water Interfaces with Arylazopyrazole Surfactants and Their Role in Photoresponsive Aqueous Foam

A new light-switchable azo-surfactant arylazopyrazole tetraethylene glycol carboxylic acid (AAP-E₄) was used as a molecular building block to functionalize macroscopic foams. AAP-E₄ was studied in the bulk solution with UV/vis spectroscopy and at the interface with sum-frequency generation (SFG) as well as tensiometry. Additional foaming experiments were performed with a dynamic foam analyzer to study the role of AAP-E₄ surfactants at the ubiquitous air-water interface as well as within macroscopic foam. In the bulk, it is possible to switch the AAP-E₄ surfactant reversibly from trans to cis configurations and vice versa using 380 nm UV and 520 nm green light, respectively. At the interface, we demonstrate the excellent switching ability of AAP-E₄ surfactants and a substantial modification of the surface tension. In addition, we show that the response of the interface is strongly influenced by lateral electrostatic interactions, which can be tuned by the charging state of AAP-E₄. Consequently, the electrostatic disjoining pressure and thus the foam stability are highly dependent on the bulk pH and the charging state of the interface. For that reason, we have studied both the surface net charge (SFG) and the surface excess (tensiometry) as important parameters that determine foam stability in this system and show that neutral pH conditions lead to the optimal compromise between switching ability, surface excess, and surface charging. Measurements on the foam stability demonstrated that foams under irradiation with green light are more stable than foams irradiated with UV light.

Photosensitive Cationic Azobenzene Surfactants: Thermodynamics of Hydration and the Complex Formation with Poly(methacrylic acid)

In this computational work, we investigate the photosensitive cationic surfactants with the trimethylammonium or polyamine hydrophilic head and the azobenzene-containing hydrophobic tail. The azobenzene-based molecules are known to undergo a reversible trans-cis-trans isomerization reaction when subjected to UV-visible light irradiation. Combining the density functional theory and the all-atom molecular dynamics simulations, the structural and the hydration properties of the trans- and the cis-isomers and their interaction with the oppositely charged poly(methacrylic acid) in aqueous solution are investigated. We establish and quantify the correlations of the molecular structure and the isomerization state of the surfactants and their hydrophilicity/hydrophobicity and the self-assembling altered by light. For this reason, we compare the hydration free energies of the trans- and the cis-isomers. Moreover, the investigations of the interaction strength between the azobenzene molecules and the polyanion provide additional elucidations of the recent experimental and theoretical studies on the light triggered reversible deformation behavior of the microgels and the polymer brushes loaded with azobenzene surfactants.