Thermoresponsive Lamellar Hydrogels with Tunable Turbidity, Structural Color, and Anisotropic Swelling

We report a thermoresponsive anisotropic photonic hydrogel: poly(dodecyl glyceryl itaconate)/polyacrylamide-poly(N-isopropylacrylamide) hydrogel (PDGI/PAAm-PNIPAM hydrogel). Hydrogels with uniaxially aligned lamellar bilayers possess bright structural color and swelling anisotropy, while PNIPAM-based hydrogels exhibit distinct thermoresponsive properties around a lower critical solution temperature (LCST). Hybridization of thermoresponsive PNIPAM with the lamellar hydrogel can give the anisotropic photonic hydrogel various fascinating thermoresponsive properties, such as structural color/turbid transition, thermoresponsive structural color, and anisotropic deswelling/reswelling behavior by temperature stimuli. The temperature-induced changes in turbidity, structural color, and anisotropic swelling of the gel around the LCST can be tuned by controlling the incorporated PNIPAM density. PNIPAM can be regioselectively incorporated into the specific region of the lamellar hydrogels by photomasking during UV polymerization. The PDGI/PAAm-PNIPAM hydrogel can find diverse promising applications such as smart windows and smart displays.

A review of electrophoretic separations in temperature-responsive Pluronic thermal gels

Gel electrophoresis is a ubiquitous bioanalytical technique used in research laboratories to validate protein and nucleic acid samples. Polyacrylamide and agarose have been the gold standard gel materials for decades, but an alternative class of polymer has emerged with potentially superior performance. Pluronic thermal gels are water-soluble polymers that possess the unique ability to undergo a change in viscosity in response to changing temperature. Thermal gels can reversibly convert between low-viscosity liquids and high-viscosity solid gels using temperature as an adjustable parameter. The properties of thermal gels provide unmatched flexibility as a dynamic separations matrix to measure analytes ranging from small molecules to cells. This review article describes the physical and chemical properties of Pluronic thermal gels to provide a fundamental overview of polymer behavior. The performance of thermal gels is then reviewed to highlight their applications as a gel matrix for electrokinetic separations in capillary, microfluidic, and slab gel formats. The use of dynamic temperature-responsive gels in bioanalytical separations is an underexplored area of research but one that holds exciting potential to achieve performance unattainable with conventional static polymers.

Temperature-Sensitive Hydrogels as Carriers for Modulated Delivery of Acetaminophen

The purposes of this study are the polymerization of temperature-sensitive copolymers based on N-isopropyl acrylamide and 10 mol % of 2-hydroxypropylmethacrylate, characterisations of their thermal, morphological and swelling properties, as well as the analysis of potential application in drug-delivery systems. Acetaminophen, the representative of non-steroidal anti-inflammatory drugs, was used as a model drug in this study. It is a common pain relief drug, which is also used for fever treatment. However, oral administration comes with certain health risks, mainly the overdose and frequent administration of up to four times a day. The goal of applying temperature-sensitive hydrogel is to enable extended administration once a day, depending on the body temperature. The swelling behavior of the obtained poly(N-isopropyl acrylamide-co-2-hydroxypropylmethacrylate) (p(NIPA/HPMA)) hydrogels and their temperature-sensitivity, kinetics and order of swelling processes at 18 and 38 °C were analyzed. The thermal properties of these hydrogels were observed by the DSC method, and the obtained thermograms showed both melting and glass transitions. The drug delivery system of p(NIPA/HPMA) hydrogels with loaded acetaminophen was analyzed using scanning electron microscopy and Fourier transform infrared spectroscopy methods. Structural analysis of FTIR spectra indicates that non-covalent intermolecular interactions of the type of hydrogen bonds were formed among functional groups of acetaminophen and side-chains of p(NIPA/HPMA) hydrogels. The surface structure of p(NIPA/HPMA) hydrogels after drug loading indicates the acetaminophen presence into the pores of the hydrogel network, and their loading efficiency was higher than 92%. Qualitative and quantitative analysis of acetaminophen, determined by the high-pressure liquid chromatography method, showed that about 90-99% of the loaded amount was released from p(NIPA/HPMA) hydrogels within 24 h. Kinetic parameters of the acetaminophen release under simulated gastrointestinal conditions were determined. Based on obtained results, the drug delivery system of temperature-sensitive p(NIPA/HPMA) hydrogels with loaded acetaminophen could be suitable for additional investigation for modulated drug administration, e.g., for extended drug administration.

Thermoresponsive bio-affinity interfaces for temperature-modulated selective capture and release of targeted exosomes

The existing methods for exosome isolation, such as ultracentrifugation, size exclusion, and affinity separation, suffer from some limitations. Herein, we aimed to develop temperature-modulated exosome-capturing materials using thermoresponsive polymers and peptides with affinity for exosomes. Poly(2-hydroxyethyl methacrylate-co-propargyl acrylate)-b-poly(N-isopropylacrylamide) (P(HEMA-co-PgA)-b-PNIPAAm) was grafted on silica beads via a two-step process of activator regenerated by electron transfer atom transfer radical polymerization. Peptides with affinity for exosomes were conjugated to the propargyl group of the bottom P(HEMA-co-PgA) segment of the copolymer via a click reaction. The prepared copolymer-grafted beads were characterized by elemental analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, gel permeation chromatography, and the turbidity of the polymer solution. Results indicated that the copolymer and peptide were successfully modified on the silica beads. Exosomes from SK-BR-3 ​cells, a human breast cancer cell line, were selectively captured on the prepared beads at 37 ​°C, as the upper PNIPAAm segment shrank and the affinity between the peptide and exosome was enhanced. Upon lowering the temperature to 4 ​°C, the captured exosomes were released from the copolymer brush because of the extension of the PNIPAAm segment that reduced the affinity between peptides and exosomes. These findings demonstrated that the prepared copolymer brush-grafted silica beads can capture and release targeted exosomes via temperature modulation. Taken together, the developed copolymer brush-grafted silica beads would be useful for the separation of exosomes using simple procedures such as temperature modulation.

Thermoresponsive block copolymer brush for temperature-modulated hepatocyte separation

Hepatic tissue engineering may be an effective approach for the treatment of liver disease; however, its practical application requires hepatic cell separation technologies that do not involve cell surface modification and maintain cell activity. In this study, we developed hepatocyte cell separation materials using a thermoresponsive polymer and a polymer with high affinity to hepatocytes. A block copolymer of poly(N-p-vinylbenzyl-O-β-D-galactopyranosyl-(1→4)-D-gluconamide) (PVLA) and poly(N-isopropylacrylamide) (PNIPAAm) [PVLA-b-PNIPAAm] was prepared through two steps of atom transfer radical polymerization. On the prepared PVLA-b-PNIPAAm brush, HepG2 cells (model hepatocytes) adhered at 37 °C and detached at 20 °C, attributed to the temperature-modulated affinity between PVLA and HepG2. Cells from the immortalized human hepatic stellate cell line (TWNT-1) did not adhere to the copolymer brush, and RAW264.7 cells (mouse macrophage; model Kupffer cells) adhered to the copolymer brush, regardless of temperature. Using the difference in cell adhesion properties on the copolymer brush, temperature-modulated cell separation was successfully demonstrated. A mixture of HepG2, RAW264.7, and TWNT-1 cells was seeded on the copolymer brush at 37 °C for adherence. By reducing the temperature to 20 °C, adhered HepG2 cells were selectively recovered with a purity of approximately 85% and normal activity. In addition, induced pluripotent stem (iPS) cell-derived hepatocytes adhered on the PVLA-b-PNIPAAm brush at 37 °C and detached from the copolymer brush at 20 °C, whereas the undifferentiated iPS cells did not adhere, indicating that the prepared PVLA-b-PNIPAAm brush could be utilized to separate hepatocyte differentiated and undifferentiated cells. These results indicated that the newly developed PVLA-b-PNIPAAm brush can separate hepatic cells from contaminant cells by temperature modulation, without affecting cell activity or modifying the cell surface. Thus, the copolymer brush is expected to be a useful separation tool for cell therapy and tissue engineering using hepatocytes.

Temperature-Responsive Polymer Brush Coatings for Advanced Biomedical Applications

Modern biomedical technologies predict the application of materials and devices that not only can comply effectively with specific requirements, but also enable remote control of their functions. One of the most prospective materials for these advanced biomedical applications are materials based on temperature-responsive polymer brush coatings (TRPBCs). In this review, methods for the fabrication and characterization of TRPBCs are summarized, and possibilities for their application, as well as the advantages and disadvantages of the TRPBCs, are presented in detail. Special attention is paid to the mechanisms of thermo-responsibility of the TRPBCs. Applications of TRPBCs for temperature-switchable bacteria killing, temperature-controlled protein adsorption, cell culture, and temperature-controlled adhesion/detachment of cells and tissues are considered. The specific criteria required for the desired biomedical applications of TRPBCs are presented and discussed.

Programed Thermoresponsive Polymers with Cleavage-Induced Phase Transition

A new programed upper critical solution temperature-type thermoresponsive polymer was developed using water-soluble anionic polymer conjugates derived from polyallylamine and phthalic acid with cleavage-induced phase transition property. Intrinsic charge inversion from anion to cation of the polymer side chain is induced through a side chain cleavage reaction in acidic aqueous media. With the progress of side chain cleavage under fixed external conditions, the polymer conjugates express a thermoresponsive property, followed by shifting a phase boundary due to the change in polymer composition. When the phase transition boundary eventually reached the examined temperature, phase transition occurs under fixed external conditions. Such new insight obtained in this study opens up the new concept of time-programed stimuli-responsive polymer possessing a cleavage-induced phase transition.

Effect of Thermal Stimulus on Kinetic Rehydration of Thermoresponsive Poly(diethylene glycol monomethyl ether methacrylate)-block-poly(poly(ethylene glycol) methyl ether methacrylate) Thin Films Probed by In Situ Neutron Reflectivity

The kinetic rehydration of thin di-block copolymer poly(diethylene glycol monomethyl ether methacrylate)-block-poly(poly(ethylene glycol) methyl ether methacrylate) (PO₂-b-PO₃₀₀) films containing two thermoresponsive components is probed by in situ neutron reflectivity (NR) with different thermal stimuli in the D₂O vapor atmosphere. The transition temperatures (TTs) of PO₂ and PO₃₀₀ blocks are 25 and 60 °C, respectively. After the one-step stimulus (rapid decrease in temperature from 60 to 20 °C), the film directly switches from a collapsed to a fully swollen state. The rehydration process is divided into four steps: (a) D₂O condensation, (b) D₂O absorption, (c) D₂O evaporation, and (d) film reswelling. However, the film presents a different rehydration behavior when the thermal stimulus is separated into two smaller steps (first decrease from 60 to 40 °C and then to 20 °C). The film first switches from a collapsed to a semiswollen state caused by the rehydrated PO₃₀₀ blocks after the first step of thermal stimulus (60 to 40 °C) and then to a swollen state induced by the rehydrated PO₂ blocks after the second step (40 to 20 °C). Thus, the kinetic responses are distinct from that after the one-step thermal stimulus. Both the time and extent of condensation as well as evaporation processes are significantly reduced in these two smaller steps. However, the final states of the rehydrated PO₂-b-PO₃₀₀ films are basically identical irrespective of the applied thermal stimulus. Thus, the final state of thermoresponsive di-block copolymer films is not affected by the external thermal stimuli, which is beneficial for the design and preparation of sensors or switches based on thermoresponsive polymer films.

Heat-Induced Flower Nanogels of Both Cholesterol End-Capped Poly(N-isopropylacrylamide)s in Water

Thermoresponsive self-assembled nanogels were conveniently prepared by cholesterol end-capped poly(N-isopropylacrylamide) (PNIPAM) in water. Both cholesterol end-capped PNIPAMs (telelchelic cholesterol PNIPAM, tCH-PNIPAM) formed flower-like nanogels by the self-assembling of four to five polymer chains with multiple domains of cholesterol in water at 20 °C. Meanwhile, one end-group cholesterol-capped PNIPAM (semitelechelic cholesterol PNIPAM, stCH-PNIPAM) was also formed as a nanogel by the self-assembling of 15-20 polymer chains with 3 to 4 cholesterol domains. The hydrophobic cholesterol domains of tCH-PNIPAM nanogels were maintained above the lower critical solution temperature (LCST) of PNIPAM (>32 °C). Differently, the hydrophobic domains of stCH-PNIPAM were disrupted by cholesterol-free PNIPAM chain ends and formed large mesoglobules above the LCST. These transition controls of hydrophilic end-capped smart polymers may open new methodologies to design thermoresponsive nanosystems.

Temperature-responsive mixed-mode column for the modulation of multiple interactions

In this study, mixed-mode chromatography columns have been investigated using multiple analyte interactions. A mixed-mode chromatography column was developed using poly(N-isopropylacrylamide) (PNIPAAm) brush-modified silica beads and poly(3-acrylamidopropyl trimethylammonium chloride) (PAPTAC) brush-modified silica beads. PNIPAAm brush-modified silica beads and PAPTAC brush-modified silica beads were prepared by atom transfer radical polymerization. The beads were then packed into a stainless-steel column in arbitrary compositions. The elution studies evaluated the column performance on hydrophobic, electrostatic, and therapeutic drug samples using steroids, adenosine nucleotide, and antiepileptic drugs as analytes, respectively. Steroids exhibited an increased retention time when the column temperature was increased. The retention of adenosine nucleotides increased with the increasing composition of the PAPTAC-modified beads in the column. The antiepileptic drugs were separated using the prepared mixed-mode columns. An effective separation of antiepileptic drugs was observed on a 10:1 PNIPAAm:PAPTAC column because the balance between the hydrophobic and electrostatic interactions with antiepileptic drugs was optimized for the bead composition. Oligonucleotides were also separated using mixed-mode columns through multiple hydrophobic and electrostatic interactions. These results demonstrate that the developed mixed-mode column can modulate multiple hydrophobic and electrostatic interactions by changing the column temperature and composition of the packed PNIPAAm and PAPTAC beads.

Two-dimensional temperature-responsive chromatography using a poly(N-isopropylacrylamide) brush-modified stationary phase for effective therapeutic drug monitoring

Therapeutic drug monitoring (TDM) is an effective pharmacological approach for controlling drug concentration in a patient's serum. Herein, a new two-dimensional chromatography system was developed using two poly(N-isopropylacrylamide) (PNIPAAm)-modified bead-packed columns for effective and safe drug monitoring. PNIPAAm-modified silica beads were prepared as packing materials using atom transfer radical polymerization of NIPAAm. The increase in the retention times of the drugs requiring TDM with increasing temperature, was attributed to enhanced hydrophobic interactions at elevated temperatures. The drugs and serum proteins were separated on the prepared column at 40 °C using an all-aqueous mobile phase. Differences in the hydrophobic interactions accounted for the elution of the serum proteins and drugs at short and long retention times, respectively, and a primary column was employed to separate the serum proteins and drugs. After eluting the serum proteins from the column, the drug was introduced into the secondary column, leading to a peak of its purified form and enabling determination of the drug concentration. Two-dimensional temperature-responsive chromatography can benefit TDM by allowing the drug concentration in the serum to be measured in all-aqueous mobile phases without sample preparation.

Liquid-cell transmission electron microscopy for imaging of thermosensitive recombinant polymers

Various polymers used in controlled release applications exhibit solution-based thermal responses. Unfortunately, very few characterization and imaging techniques permit resolution of individual polymers during their thermally-triggered phase transitions. Here, we demonstrate the use of temperature-ramp liquid-cell transmission electron microscopy (LCTEM) for real-time evaluation of the solution and interfacial behavior of elastinlike polypeptides (ELPs) and their self-assembled nanostructures over a temperature range incorporating their intrinsic lower critical solution temperatures (LCSTs). Individual polymers and supramolecular assemblies were discriminated dependent upon solubility states. The recombinant polymers were shown to adsorb to the silicon-nitride chip window from the buffered saline solution and desorb in a temperature-dependent manner. Silk-elastinlike protein block copolymers (SELPs) (composed of repeat peptide motifs of silk and elastin) differed from ELPs in thermal behavior. While both polymers were shown to cluster, only SELPs formed robust amyloid-like fibers upon heating.

Design of biointerfaces composed of soft materials using controlled radical polymerizations

Soft interface materials have an immense potential for the improvement of biointerfaces, which are the interface of biological and artificially designed materials. Controlling the chemical and physical structures of the interfaces at the nanometer level plays an important role in understanding the mechanism of the functioning and its applications. Controlled radical polymerization (CRP) techniques, including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, have been developed in the field of precision polymer chemistry. It allows the formation of well-defined surfaces such as densely packed polymer brushes and self-assembled nanostructures of block copolymers. More recently, a novel technique to prepare polymers containing biomolecules, called biohybrids, has also been developed, which is a consequence of the advancement of CRP so as to proceed in an aqueous media with oxygen. This review article summarizes recent advances in CRP for the design of biointerfaces.

Hydrogel Coating with Temperature Response Retention Behavior and Its Application in Selective Separation of Liquid Chromatography

We reporte the double-layer hydrogel-coated mesoporous silica material as a new stationary phase for liquid chromatography. The method of combining physical coating and chemical coating was to apply hydrogel coating on the surface of silica, and finally, a new type of liquid chromatography stationary phase with in situ coating of the functional hydrogel on silica was obtained. This hydrogel-functionalized liquid chromatography stationary phase also exhibits a certain temperature responsiveness. Experimental results show that this temperature response is mainly due to changes in the hydrogen bonding between the stationary phase and the analyte at different temperatures in the column oven, which leads to changes in retention behavior. The hydrogel-coated mesoporous silica microspheres showed excellent selectivity for many polar analytes. An excellent column efficiency was obtained (139 000 plates/m for terephthalic acid) after optimization of chromatographic conditions. In addition to rapid separation of some analytes, this new hydrogel stationary phase also has certain superiority in chromatographic performance compared with other new excellent liquid chromatography stationary phases functioned by three-dimensional cross-linking systems. The important thing is that this strategy is relatively easy to prepare a new stationary phase with different properties.

Temperature responsive chromatography for therapeutic drug monitoring with an aqueous mobile phase

Therapeutic drug monitoring is a key technology for effective pharmacological treatment. In the present study, a temperature-responsive chromatography column was developed for safe and simple therapeutic drug monitoring without the use of organic solvents. Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel-modified silica beads were prepared via a condensation reaction and radical polymerization. The temperature-dependent elution behavior of the drugs was observed using a PNIPAAm-modified silica-bead packed column and an all-aqueous mobile phase. Sharp peaks with reproducible retention times were observed at temperatures of 30 °C or 40 °C because the PNIPAAm hydrogel on the silica beads shrinks at these temperatures, limiting drug diffusion into the PNIPAAm hydrogel layer. The elution behavior of the sample from the prepared column was examined using a mixture of serum and model drugs. The serum and drugs were separated on the column at 30 °C or 40 °C, and the concentration of the eluted drug was obtained using the calibration curve. The results show that the prepared chromatography column would be useful for therapeutic drug monitoring because the drug concentration in serum can be measured without using organic solvents in the mobile phase and without any need for sample preparation.

Thermally-modulated cell separation columns using a thermoresponsive block copolymer brush as a packing material for the purification of mesenchymal stem cells

Cell therapy using mesenchymal stem cells (MSCs) is used as effective regenerative treatment. Cell therapy requires effective cell separation without cell modification and cellular activity reduction. In this study, we developed a temperature-modulated mesenchymal stem cell separation column. A temperature-responsive cationic block copolymer, poly(N,N-dimethylaminopropylacrylamide)-b-poly(N-isopropylacrylamide)(PDMAPAAm-b-PNIPAAm) brush with various cationic copolymer compositions, was grafted onto silica beads via two-step atom transfer radical polymerization. Using the packed beads, the elution behavior of the MSCs was observed. At 37 °C, the MSCs were adsorbed onto the column via both hydrophobic and electrostatic interactions with the PNIPAAm and PDMAPAAm segments of the copolymer brush, respectively. By reducing the temperature to 4 °C, the adsorbed MSCs were eluted from the column by reducing the hydrophobic and electrostatic interactions attributed to the hydration and extension of the PNIPAAm segment of the block copolymer brush. From the temperature-modulated adsorption and elution behavior of MSCs, a suitable DMAPAAm composition of the block copolymer brush was determined. Using the column, a mixture of MSC and BM-CD34⁺ cells was separated by simply changing the column temperature. The column was used to purify the MSCs, with purities of 78.2%, via a temperature change from 37 °C to 4 °C. Additionally, the cellular activity of the MSCs was retained throughout the column separation step. Overall, the obtained results show that the developed column is useful for MSC separation without cell modification and cellular activity reduction.

Thermally tunable hydrogel crosslinking mediated by temperature sensitive liposome

Hydrogel crosslinking by external stimuli is a versatile strategy to control and modulate hydrogel properties. Besides photonic energy, thermal energy is one of the most accessible external stimuli and widely applicable for many biomedical applications. However, conventional thermal crosslinking systems require a relatively high temperature (over 100 °C) to initiate covalent bond formation. To our knowledge, there has not been a thermally tunable hydrogel crosslinking system suitable for biological applications. This work demonstrates a unique approach to utilize temperature sensitive liposomes to control and modulate hydrogel crosslinking over mild temperature range (below 50 °C). Temperature sensitive liposomes were used to control the release of chemical crosslinkers by moderate temperature changes. The thermally controlled crosslinker release resulted in tunable mechanical and transport properties of the hydrogel. No significant inflammable response observed in the histology results ensured the biocompatibility of the liposome-mediated crosslinkable hydrogel. This work opens new opportunities to implement thermal energy system for control and modulate hydrogel properties.

Temperature-responsive spin column for sample preparation using an all-aqueous eluent

We present a temperature-responsive spin column using an all-aqueous eluent. The method is intended as a simple sample preparation method for protein removal from serum, which is required for serum drug analysis. As packing materials for the spin column, we prepared two types of silica beads via surface-initiated radical polymerization. The large beads (diameter, 40-63 μm) were grafted with a temperature-responsive cationic copolymer, poly(N-isopropylacrylamide-co-N,N-dimethylaminopropyl acrylamide-co-n-butyl methacrylate) (P(NIPAAm-co-DMAPAAm-co-BMA)), and the small beads (diameter, 5 μm) were grafted with a temperature-responsive hydrophobic copolymer, P(NIPAAm-co-BMA). The beads were packed into the spin column as a double layer: P(NIPAAm-co-BMA) silica beads on the bottom and P(NIPAAm-co-DMAPAAm-co-BMA) silica beads on the top. The sample purification efficacy of the prepared spin column was evaluated on a model sample analyte (the antifungal drug voriconazole mixed with blood serum proteins). At 40 °C, the serum proteins and voriconazole were adsorbed on the prepared spin column via hydrophobic and electrostatic interactions. When the temperature was decreased to 4 °C, the adsorbed voriconazole was eluted from the column with the pure water eluent, while the serum proteins remained in the column. This temperature-responsive spin column realizes sample preparation simply by changing the temperature.

Fast Thermoresponsive Poly(oligoethylene glycol methacrylate) (POEGMA)-Based Nanostructured Hydrogels for Reversible Tuning of Cell Interactions

Reactive electrospinning is demonstrated as a viable method to create fast-responsive and degradable macroporous thermoresponsive hydrogels based on poly(oligoethylene glycol methacrylate) (POEGMA). Hydrazide- and aldehyde-functionalized POEGMA precursor polymers were coelectrospun to create hydrazone cross-linked nanostructured hydrogels in a single processing step that avoids the need for porogens, phase separation-driving additives, or scaffold postprocessing. The resulting nanostructured hydrogels can respond reversibly and repeatedly to changes in external temperature within seconds, in contrast to the minutes-to-hours response time observed with bulk hydrogels. Furthermore, nearly quantitative cell delamination can be achieved within 2 min of incubation at 4 °C, resulting in the recovery of as many or more (as well as more proliferatively active) cells from the substrate relative to the conventional trypsinization protocol. The combined macroporosity, nanoscale feature size, and interfacial switching potential of these nanostructured hydrogels thus offer promise for manipulating cell-hydrogel interactions as well as other applications in which rapid responses to external stimuli are desirable.

Thermoresponsive interfaces obtained using poly(N-isopropylacrylamide)-based copolymer for bioseparation and tissue engineering applications

Poly(N-isopropylacrylamide) (PNIPAAm) is the most well-known and widely used stimuli-responsive polymer in the biomedical field owing to its ability to undergo temperature-dependent hydration and dehydration with temperature variations, causing hydrophilic and hydrophobic alterations. This temperature-dependent property of PNIPAAm provides functionality to interfaces containing PNIPAAm. Notably, the hydrophilic and hydrophobic alterations caused by the change in the temperature-responsive property of PNIPAAm-modified interfaces induce temperature-modulated interactions with biomolecules, proteins, and cells. This intrinsic property of PNIPAAm can be effectively used in various biomedical applications, particularly in bioseparation and tissue engineering applications, owing to the functionality of PNIPAAm-modified interfaces based on the temperature modulation of the interaction between PNIPAAm-modified interfaces and biomolecules and cells. This review focuses on PNIPAAm-modified interfaces in terms of preparation method, properties, and their applications. Advances in PNIPAAm-modified interfaces for existing and developing applications are also summarized.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

A 'smart' aptamer-functionalized continuous label-free cell catch-transport-release system

Label-free cell sorting devices are of great significance for biomedical research and clinical therapeutics. However, current platforms for label-free cell sorting cannot achieve continuity and selectivity simultaneously, resulting in complex steps and limited reliability. Here, an immunoaffinity-based cell catch-transport-release thermo-chemo-mechanical coupling hydrogel (iCatch) device is reported. It contains a temperature-responsive hydrogel that can generate spatial movement synergically with the reversible binding of affinity handle modified. The functionalized hydrogel is embedded inside a biphasic microfluidic platform to enable cell transportation between the flows. The cell sorting capability and biocompatibility of the iCatch device were validated with CCRF-CEM cells as a proof-of-concept, and CCRF-CEM-specific aptamers with thermo-responsive affinity as well as a hydrogel with temperature-dependent volume were employed accordingly. A cell catching efficiency of ∼40% and a recovery rate of ∼70% were achieved. The iCatch device provides a high-throughput (∼900 cells mm-1 s-1) platform for cell sorting and is ultimately valuable for downstream biomedical applications.

Effect of pore diameter on the elution behavior of analytes from thermoresponsive polymer grafted beads packed columns

Temperature-responsive chromatography using thermoresponsive polymers is innovative and can control analyte retention via column temperature. Analyte elution behavior in this type of chromatography depends on the modified thermoresponsive polymer and the structure of the base materials. In the present study, we examine the effect of the pore diameter of silica beads on analyte elution behavior in temperature-responsive chromatography. Poly(N-isopropylacrylamide-co-n-butyl methacrylate) hydrogel was applied to beads of various pore sizes: 7, 12, and 30 nm. Almost the same amount of copolymer hydrogel was applied to all beads, indicating that the efficiency of copolymer modification was independent of pore size. Analyte retention on prepared beads in a packed column was observed using steroids, benzodiazepines, and barbiturates as analytes. Analyte retention times increased with temperature on packed columns of 12- and 30-nm beads, whereas the column packed with 7-nm beads exhibited decreased retention times with increasing temperature. The difference in analyte elution behavior among the various pore sizes was attributed to analyte diffusion into the bead pores. These results demonstrate that bead pore diameter determines temperature-dependent elution behavior.

Design of an LCST-UCST-Like Thermoresponsive Zwitterionic Copolymer

Thermoresponsive polymers that possess both UCST- and LCST-like behaviors have generally been designed using diblock copolymers that are mostly composed of an LCST-like polymer and a UCST polymer. Herein, we prepared an LCST-UCST-type polymer composed of UCST-like thermoresponsive zwitterionic sulfabetaine methacrylate and nonthermoresponsive PEG methacrylate, ZB-PEG, by reversible addition-fragmentation chain transfer (RAFT) copolymerization. By adjusting the PEG composition, ZB-PEG formed a mesoglobule, a microglobule, and the dissociated states in phosphate-buffered saline (PBS). These states were found to be reversible via temperature control. Moreover, this behavior showed high reversibility and succeeded in stabilizing horseradish peroxidase (HRP) in the dilute condition. Such thermoresponsive ZB-PEG can be applied over a wide range of applications in biotechnology and other fields.

Selective capture and non-invasive release of cells using a thermoresponsive polymer brush with affinity peptides

Thermoresponsive block copolymer brush with cell affinity peptides was prepared via two steps of ATRP and subsequent click reaction. The prepared polymer brush can purify cells with high selectivity by simply changing temperature.

Synthesis of Photoreactive Poly(ethylene oxide)s for Surface Modification

Photoreactive polymers that generate active species upon irradiation with light are very useful for modifying the surfaces of substrates. However, water solubility decreases as the number of photoreactive functional groups on the polymer increases because most photoreactive functional groups are hydrophobic. In order to improve the hydrophilicity of the photoreactive polymer, we synthesized polyethylene glycol-based photoreactive polymers bearing hydrophobic azidophenyl groups on their side chains. Because of the hydrophilicity of the ethylene glycol main chain, polymers with large numbers of azidophenyl groups were solubilized in protic solvents compared to hydrophobic alkylene chain-based polymers prepared by radical polymerization of methacrylate monomers. Polymers were immobilized on various substrates by irradiation with ultraviolet light and were shown to suppress nonspecific interactions between proteins and cells on the substrate. We conclude that such polymers are useful, highly water soluble antifouling agents.

Antibody drug separation using thermoresponsive anionic polymer brush modified beads with optimised electrostatic and hydrophobic interactions

Antibody drugs play an important role in biopharmaceuticals, because of the specificity for target biomolecules and reduction of side effects. Thus, separation and analysis techniques for these antibody drugs have increased in importance. In the present study, we develop functional chromatography matrices for antibody drug separation and analysis. Three types of polymers, poly(N-isopropylacrylamide (NIPAAm)-co-2-acrylamido-2-methylpropanesulfonic acid (AMPS)-co-N-phenyl acrylamide (PhAAm)), P(NIPAAm-co-AMPS-co-n-butyl methacrylate (BMA)), and P(NIPAAm-co-AMPS-co-tert-butylacrylamide (tBAAm)), were modified on silica beads through atom transfer radical polymerisation. Rituximab elution profiles were observed using the prepared beads-packed column. Rituximab adsorption at high temperature and elution at low temperature from the column were observed, as a result of the temperature-modulated electrostatic and hydrophobic interactions. Using the column, rituximab purification from contaminants was performed simply by changing the temperature. Additionally, three types of antibody drugs were separated using the column through temperature-modulated hydrophobic and electrostatic interactions. These results demonstrate that the temperature-responsive column can be applied for the separation and analysis of biopharmaceuticals through a simple control of the column temperature.

Exploration of the Selectivity and Retention Behavior of Alternative Polyacrylamides in Temperature Responsive Liquid Chromatography

Temperature responsive liquid chromatography (TRLC) allows for separation of organic solutes in purely aqueous mobile phases whereby retention is controlled through temperature. The vast majority of the work has thus far been performed on poly[N-isopropylacrylamide] (PNIPAAm)-based columns, while the performance of other temperature responsive polymers has rarely been compared under identical conditions. Therefore, in this work, two novel TRLC phases based on poly[N-n-propylacrylamide] (PNNPAAm) and poly[N,N-diethylacrylamide] (PDEAAm) are reported and compared to the state of the art PNIPAAm based column. Optimal comparison is thereby obtained by the use of controlled radical polymerizations, identical molecular weights, and by maximizing carbon loads on the silica supporting material. Analysis of identical test mixtures of homologue series and pharmaceutical samples revealed that PNNPAAm performs in a similar way as PNIPAAm while offering enhanced retention and a shift of the useable temperature range toward lower temperatures. PDEAAm offers a range of novel possibilities as it depicts a different selectivity, allowing for enhanced resolution in TRLC in, for example, coupled column systems. Reduced plate heights of 3 could be obtained on the homemade columns, offering the promise for reasonable column efficiencies in TRLC despite the use of bulky polymers as stationary phases in HPLC.

Molecular recognition with soft biomaterials

Biomacromolecules and engineered materials can achieve molecular recognition if they engage their ligand with properly oriented and chemically complementary moieties. Recently, there has been significant interest in fabricating recognitive soft materials, which possess specific affinity for biological analytes. We present a summary and evaluation of current recognitive materials for biosensing, drug delivery, and regenerative medicine applications. We highlight the impact of material composition on the extent and specificity of ligand adsorption, citing new theoretical and empirical evidence. We conclude with a guide for synthesizing and characterizing novel recognitive materials, as well as recommendations for ligand selection and experimental design.

Thermoresponsive chiral stationary phase functionalized with the copolymer of β-cyclodextrin and N-isopropylacrylamide for high performance liquid chromatography

A novel chiral stationary phase (CSP) was prepared through the reaction of surface-initiated atom transfer radical polymerization (ATRP) by the copolymerization of thermoresponsive N-isopropylacrylamide (NIPAM) and β-cyclodextrin (β-CD) on the silica beads for high performance liquid chromatography (HPLC). X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), Fourier transform infrared spectrometry (FT-IR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were applied to characterize the surface property of modified silica. Thermoresponsive modulation for the effect on enantioselectivity were investigated with chiral reagents including 1-phenyl-1-propanol, styrene oxide, 2-phenylpropionic acid and commercial chiral drugs comprising ibuprofen and labetalol hydrochloride. The column efficiency was evaluated by chromatographic parameters including retention factor (k), selective factor (α), resolution (R_s), plate number (N) and peak tailing factor (T_f). The results showed that five chiral solutes could be separated on the prepared smart column. And the selectivity of these compounds could be modulated by regulating the column temperature. It was contributed to the thermoresponsive NIPAM assisting β-CD to separate these chiral compounds. These results indicated that the thermoresponsive CSP would be a potential tool for separation of hydrophilic and hydrophobic chiral drugs and this paper provided a novel method for chiral separation in the future.

Rapid Photoinduced Single Cell Detachment from Gold Nanoparticle-Embedded Collagen Gels with Low Denaturation Temperature

Cell Separation is important in various biomedical fields. We have prepared gold nanoparticle (AuNP)-embedded collagen gels as a visible-light-responsive cell scaffold in which photoinduced single cell detachment occurs through local thermal denaturation of the collagen gel via the photothermal effect of AuNP. Physicochemical properties of collagen materials depend on the origin of the collagen and the presence of telopeptides. In this study, we prepared various AuNP-embedded collagen gels by using different collagen materials with and without the telopeptides to compare their thermal denaturation properties and photoinduced single cell detachment behaviors. Cellmatrix type I-C without telopeptides exhibited a lower denaturation temperature than Cellmatrix type I-A and Atelocell IAC, as examined by Fourier transform infrared (FTIR) spectroscopy, rheological analysis, and sol-gel transition observation. Three-dimensional (3D) laser microscopic imaging revealed that collagen fibers shrank in Cellmatrix type I-A upon heating, but collagen fibers disappeared in Cellmatrix type I-C upon heating. Cells cultured on the Cellmatrix type I-C-based AuNP-embedded collagen gel detached with shorter photoirradiation than on the Cellmatrix type I-A-based AuNP-embedded collagen gel, suggesting that collagen gels without telopeptides are suitable for a photoinduced single cell detachment system.

Cell adhesion control by photoinduced LCST shift of PNIPAAm-based brush scaffolds

Cell adhesion was markedly regulated on spiropyran-containing PNIPAAm-based brush scaffolds by photoinduced LCST shift across a standard culture temperature.

Enhanced mechanical properties and cell separation with thermal control of PIPAAm-brushed polymer-blend microfibers

Thermoresponsive microfibers with enhanced mechanical properties for temperature-modulated cell separation were developed by electrospinning of blending PVBC and PBMA, and by subsequently modifying the microfibers with PIPAAm via ATRP.

Controlled polymerization for the development of bioconjugate polymers and materials

Conjugates of various biopolymers with synthetic polymers were preparedvialiving radical polymerization. The conjugates have precise structures and potential for novel biofunctional materials.

Dual pH and thermoresponsive alternating polyampholytes in alcohol/water solvent mixtures

Polyampholytes consist of alternating opposite charges were synthesized by alternating RAFT (co)polymerization of cationic and anionic monomers and their pH dependent thermoresponsive behavior in water and alcohol/water solvent mixtures is reported.

Supramolecular Polymer Network-Mediated Structural Phase Transitions within Polymeric Micelles in Aliphatic Alcohols

Self-complementary supramolecular polymers (SCSPs), an efficient combination of sextuple hydrogen-bonded dimer moieties and a temperature-responsive polymer, can promote the construction of stable supramolecular polymer networks (SPNs) that enable the formation of well-defined nanospherical micelles in aliphatic alcohols. These micelles undergo tailorable, thermoresponsive phase transitions at the upper critical solution temperature (UCST) and have a desirable spherical morphology and size ranges, thus, are potential candidates for applications in interfacial engineering and biomedical fields. Moreover, concentration-dependent UCST measurements and variable-temperature experiments indicated that the hydrogen-bonded complexes are strong enough to form stable intermolecularly entangled SPNs within the micelles, even above the UCST or at low concentrations in solution, which enables the micelles to undergo reversible temperature-dependent conformational changes between insoluble and soluble globules without significant changes in particle size or size distribution. Thus, this newly discovered system offers a new approach toward the development of next-generation temperature-responsive SCSPs with the desired structural stability that undergoes UCST transitions.

Characteristic differences of cell sheets composed of mesenchymal stem cells with different tissue origins

INTRODUCTION

Stem cell therapy with mesenchymal stem cells (MSCs) has been widely used in many clinical trials, and therapy with MSC sheets shows promise for patients. However, there are few reports characterizing MSC sheets. In the present study, the properties of MSC sheets derived from bone marrow, adipose tissue, and umbilical cord were evaluated.

METHODS

Cell sheets were fabricated with MSCs from different tissue origins in temperature-responsive cell culture dishes with and without pre-coating of fetal bovine serum (FBS). MSC adhesion behavior in the culture dish was observed. Secretion of cytokines related to cell proliferation and immune regulation from MSC sheets was investigated by ELISA. The adhesion properties of the MSC sheets were investigated by time-lapse microscopy.

RESULTS

Different cell adhesion and proliferation rates in temperature-responsive cell culture dishes were observed among the three types of MSCs. FBS pre-coating of the dishes enhanced cell attachment and proliferation in all cell types. Harvested cell sheets showed high attachment capacity to tissue culture polystyrene dish surfaces.

CONCLUSIONS

MSC sheets can be fabricated from MSCs from different tissue origins using temperature-responsive cell culture dishes. The fabricated MSC sheets could be useful in cell transplantation therapies by choosing appropriate types of MSCs that secrete therapeutic cytokines for the targeted diseases.

Mixed polymer brush as a functional ligand of silica beads for temperature-modulated hydrophobic and electrostatic interactions

We developed a mixed polymer brush, which consists of temperature-responsive polymer and cationic polymer modified beads as functional chromatographic matrices, for temperature-modulated multiple hydrophobic and electrostatic interactions. The mixed polymer brush was modified on silica beads through the combination of reversible addition-fragmentation chain transfer (RAFT) polymerization of N,N-dimethylaminopropyl acrylamide (DMAPAAm) and surface initiated atom transfer radical polymerization (ATRP) of N-isopropylacrylamide (NIPAAm). Zeta potential measurement of the mixed polymer brush revealed that the zeta potential increased with increasing temperature, which was attributed to the exposed PDMAPAAm on the beads arising from the shrinking of PNIPAAm upon increasing the temperature. The prepared beads were used as the packing material of high performance liquid chromatography (HPLC) columns, and the elution behavior of steroids, adenosine nucleotides, and proteins through the column was observed. The retention time of steroids increased with increasing the column temperature because of the dehydration of PNIPAAm in the mixed polymer brush. Adenosine nucleotides were also retained by the columns, which was attributed to the electrostatic interaction with PDMAPAAm in the mixed polymer brush. Several proteins were adsorbed on the column at elevated temperatures because of the enhanced electrostatic interaction of exposed PDMAPAAm and the enhanced hydrophobic interaction resulting from the dehydration of PNIPAAm. By exploiting this unique property, mixtures of proteins could be separated by simply changing the column temperature. These results indicate that the developed mixed polymer brush modified beads would be useful as functional chromatographic packing matrices for thermally-modulated multiple hydrophobic and electrostatic interactions.