Maleimide-bearing nanogels as novel mucoadhesive materials for drug delivery

Functionalisation of chitosan with methacryloyl and crotonoyl groups as a strategy to enhance its mucoadhesive properties

Mucoadhesive polymers are crucial for prolonging drug retention on mucosal surfaces. This study focuses on synthesising and characterising novel derivatives by reacting chitosan with crotonic and methacrylic anhydrides. The structure of the resulting derivatives was confirmed using proton-nuclear magnetic resonance spectroscopy and Fourier-transform infrared spectroscopy. It was established that the degree of substitution plays a crucial role in the pH-dependent solubility profiles and electrophoretic mobility of the chitosan derivatives. Spray-drying chitosan solutions enabled preparation of microparticles, whose mucoadhesive properties were evaluated using fluorescence flow-through studies and tensile test, demonstrating improved retention on sheep nasal mucosa for modified derivatives. Acute toxicity studies conducted in vivo using planaria and in vitro using MTT assay with the Caco-2 cell line, a model of the mucosal epithelium in vitro, showed that the novel derivatives are not cytotoxic. These findings emphasise the potential of tailored chitosan chemical modifications for enhancing transmucosal drug delivery.

Development of FK506-loaded maleimide-functionalized cationic niosomes for prolonged retention and therapeutic efficacy in dry eye disease

Tacrolimus (FK506) is widely used in ocular diseases such as corneal transplantation-host disease, uveitis, conjunctivitis, and dry eye disease (DED). However, its low aqueous solubility and poor ocular retention pose challenges for its application in the eye diseases. This study developed a novel FK506-loaded maleimide-functionalized cationic niosomes (FK506 M-CNS), aiming to prolong the retention time of FK506 in the eye and enhance its therapeutic efficacy. FK506 M-CNS had a particle size of 87.69 ± 1.05 nm and zeta potential of 22.06 ± 1.01 mV. Results of histological evaluation through H&E staining and in vitro cytotoxicity of human corneal epithelial cells consistently revealed the excellent biocompatibility of FK506 M-CNS. FK506 M-CNS exhibited superior ocular retention compared to the market product Talymus®. FK506 M-CNS significantly alleviated the symptoms of DED and promoted the recovery of corneal epithelia. FK506 M-CNS group had the lowest expression levels of inflammatory factors associated with DED. These superiorities might be due to the electrostatic interaction between cationic niosomes and negatively charged mucin in the eye, and the covalent binding of maleimide with the thiol group in the mucin. The maleimide group improved the ocular retention and efficacy of FK506, but did not increase the toxicity. Results indicated that FK506 M-CNS had great potential as a nanopharmaceutical in the treatment of ocular diseases, and M-CNS could be a promising drug carrier for ophthalmic drug delivery systems.

Recent advances in modified chitosan-based drug delivery systems for transmucosal applications: A comprehensive review

Recently, transmucosal drug delivery systems (TDDSs) have been extensively studied because they protect therapeutic agents from degradation; improve drug residence time at the mucosal membranes; and facilitate sustained drug release for a prolonged period. Chitosan is a well-researched polymeric excipient due to its biocompatibility, non-toxicity, biodegradability, mucoadhesive, antimicrobial, and low immunogenicity. Its limited mucoadhesiveness in the physiological environment necessitated its chemical modification. This review highlights the recent advances in the chemical modification of chitosan with various chemical groups to generate various functionalized chitosan derivatives, such as thiolated, acrylated, methacrylated, boronated, catechol, and maleimide-functionalized chitosans with superior mucoadhesive capabilities compared to the parent chitosan. Moreover, it presents the different prepared dosage forms, such as tablets, hydrogels, films, micro/nanoparticles, and liposomes/niosomes for drug administration within various mucosal routes including oral, buccal, nasal, ocular, colonic, intravesical, and vaginal routes. The reported data from preclinical studies of these pharmaceutical formulations have revealed the controlled and target-specific delivery of therapeutics because of their formation of covalent bonds with thiol groups on the mucosal surface. All functionalized chitosan derivatives exhibited long drug residence time on mucosal surfaces and sustainable drug release with excellent cellular permeability, drug efficacy, and biocompatibility. These promising data could be translated from the research laboratories to the clinics with consistent and intensive research effort.

Enhancing Mucoadhesive Properties of Gelatin through Chemical Modification with Unsaturated Anhydrides

Gelatin is a water-soluble natural polyampholyte with poor mucoadhesive properties. It has traditionally been used as a major ingredient in many pharmaceuticals, including soft and hard capsules, suppositories, tissue engineering, and regenerative medicine. The mucoadhesive properties of gelatin can be improved by modifying it through conjugation with specific adhesive unsaturated groups. In this study, gelatin was modified by reacting with crotonic, itaconic, and methacrylic anhydrides in varying molar ratios to yield crotonoylated-, itaconoylated-, and methacryloylated gelatins (abbreviated as Gel-CA, Gel-IA, and Gel-MA, respectively). The successful synthesis was confirmed using 1H NMR, FTIR spectroscopies, and colorimetric TNBSA assay. The effect of chemical modification on the isoelectric point was studied through viscosity and electrophoretic mobility measurements. The evolution of the storage (G') and loss (G'') moduli was employed to determine thermoreversible gelation points of modified and unmodified gelatins. The safety of modified gelatin derivatives was assessed with an in vivo slug mucosal irritation test (SMIT) and an in vitro MTT assay utilizing human pulmonary fibroblasts cell line. Two different model dosage forms, such as physical gels and spray-dried microparticles, were prepared and their mucoadhesive properties were evaluated using a flow-through technique with fluorescent detection and a tensile test with ex vivo porcine vaginal tissues and sheep nasal mucosa. Gelatins modified with unsaturated groups exhibited superior mucoadhesive properties compared to native gelatin. The enhanced ability of gelatin modified with these unsaturated functional groups is due to the formation of covalent bonds with cysteine-rich subdomains present in the mucin via thiol-ene click Michael-type addition reactions occurring under physiologically relevant conditions.

Drug delivery methods based on nanotechnology for the treatment of eye diseases

One of the most difficult tasks among the numerous medication delivery methods is ocular drug delivery. Despite having effective medications for treating ocular illness, we have not yet managed to develop an appropriate drug delivery strategy with the fewest side effects. Nanotechnology has the potential to significantly address the drawbacks of current ocular delivery systems, such as their insufficient therapeutic effectiveness and unfavourable side effects from invasive surgery or systemic exposure. The objective of the current research is to highlight and update the most recent developments in nano-based technologies for the detection and treatment of ocular diseases. Even if more work has to be done, the advancements shown here might lead to brand-new, very practical ocular nanomedicines.

Mucoadhesive pickering nanoemulsions via dynamic covalent chemistry

HYPOTHESIS

Submicron oil droplets stabilized using aldehyde-functionalized nanoparticles should adhere to the primary amine groups present at the surface of sheep nasal mucosal tissue via Schiff base chemistry.

EXPERIMENTS

Well-defined sterically-stabilized diblock copolymer nanoparticles of 20 nm diameter were prepared in the form of concentrated aqueous dispersions via reversible addition-fragmentation chain transfer (RAFT) aqueous emulsion polymerization of 2,2,2-trifluoroethyl methacrylate (TFEMA) using a water-soluble methacrylic precursor bearing cis-diol groups. Some of these hydroxyl-functional nanoparticles were then selectively oxidized using an aqueous solution of sodium periodate to form a second batch of nanoparticles bearing pendent aldehyde groups within the steric stabilizer chains. Subjecting either hydroxyl- or aldehyde-functional nanoparticles to high-shear homogenization with a model oil (squalane) produced oil-in-water Pickering macroemulsions of 20-30 µm diameter. High-pressure microfluidization of such macroemulsions led to formation of the corresponding Pickering nanoemulsions with a mean droplet diameter of around 200 nm. Quartz crystal microbalance (QCM) experiments were used to examine adsorption of both nanoparticles and oil droplets onto a model planar substrate bearing primary amine groups, while a fluorescence microscopy-based mucoadhesion assay was developed to assess adsorption of the oil droplets onto sheep nasal mucosal tissue.

FINDINGS

Squalane droplets coated with aldehyde-functional nanoparticles adhered significantly more strongly to sheep nasal mucosal tissue than those coated with the corresponding hydroxyl-functional nanoparticles. This difference was attributed to the formation of surface imine bonds via Schiff base chemistry and was also observed for the two types of nanoparticles alone in QCM studies. Preliminary biocompatibility studies using planaria indicated only mild toxicity for these new mucoadhesive Pickering nanoemulsions, suggesting potential applications for the localized delivery of hydrophobic drugs.

Nanocarriers transport across the gastrointestinal barriers: The contribution to oral bioavailability via blood circulation and lymphatic pathway

Oral administration is the preferred route of drug delivery in clinical practice due to its noninvasiveness, safety, convenience, and high patient compliance. The gastrointestinal tract (GIT) plays a crucial role in facilitating the targeted delivery of oral drugs. However, the GIT presents multiple barriers that impede drug absorption, including the gastric barrier in the stomach and the mucus and epithelial barriers in the intestine. In recent decades, nanotechnology has emerged as a promising approach for overcoming these challenges by utilizing nanocarrier-based drug delivery systems such as liposomes, micelles, polymeric nanoparticles, solid lipid nanoparticles, and inorganic nanoparticles. Encapsulating drugs within nanocarriers not only protects them from degradation but also enhances their transport and absorption across the GIT, ultimately improving oral bioavailability. The aim of this review is to elucidate the mechanisms underlying nanocarrier-mediated transportation across the GIT into systemic circulation via both the blood circulation and lymphatic pathway.

Tannic acid-coated cellulose nanocrystals with enhanced mucoadhesive properties for aquaculture

Mucoadhesion can be exploited as a strategy to target drug and nutrient delivery to the outer mucosal layers of fish in aquaculture farms. Cellulose nanocrystals (CNC) derived from cellulose pulp fibers can interact with the mucosal membranes via hydrogen bonding, however, their mucoadhesive properties are weak and should be enhanced. In this study, CNC were coated with tannic acid (TA), a plant polyphenol with excellent wet-resistant bioadhesive properties, to strengthen their mucoadhesive capability. The optimal CNC:TA mass ratio was determined to be 20:1. The modified CNCs were 190 ± 40 nm in length and 21 ± 4 nm wide and displayed excellent colloidal stability, with a zeta potential of -35 mV. Turbidity titrations and rheological measurements revealed that the modified CNC possessed superior mucoadhesive properties compared to pristine CNC. Modification with tannic acid introduced additional functional groups for stronger hydrogen bond formation and hydrophobic interactions with mucin, which was confirmed by a large reduction in viscosity enhancement values in the presence of chemical blockers (urea and Tween80). The enhanced mucoadhesion of the modified CNC could be utilized for the fabrication of a mucoadhesive drug delivery system to promote sustainable aquaculture practices.

Nanogels for bone tissue engineering - from synthesis to application

Nanogels are cross-linked hydrogel nanoparticles with a three-dimensional, tunable porous structure that merges the best features of hydrogels and nanoparticles, including the ability to retain their hydrated nature and to swell and shrink in response to environmental changes. Nanogels have attracted increasing attention for use in bone tissue engineering as scaffolds for growth factor transport and cell adhesion. Their three-dimensional structures allow the encapsulation of a wide range of hydrophobic and hydrophilic drugs, enhance their half-life, and impede their enzymatic breakdown in vivo. Nanogel-based scaffolds are a viable treatment modality for enhanced bone regeneration. They act as carriers for cells and active ingredients capable of controlled release, enhanced mechanical support, and osteogenesis for enhanced bone tissue regeneration. However, the development of such nanogel constructs might involve combinations of several biomaterials to fabricate active ingredients that can control release, enhance mechanical support, and facilitate osteogenesis for more effective bone tissue regeneration. Hence, this review aims to highlight the potential of nanogel-based scaffolds to address the needs of bone tissue engineering.

Hydroxyethyl cellulose functionalised with maleimide groups as a new excipient with enhanced mucoadhesive properties

Hydroxyethylcellulose (HEC) is a non-ionic water-soluble polymer with poor mucoadhesive properties. The mucoadhesive properties of hydroxyethylcellulose can be improved by modifying it through conjugation with molecules containing maleimide groups. Maleimide groups interact with the thiol groups present in cysteine domains in the mucin via Michael addition reaction under physiological conditions to form a strong mucoadhesive bond. This will prolong the residence time of a dosage form containing this modified polymer and drug on mucosal surfaces. In this study HEC was modified by reaction with 4-bromophenyl maleimide in varying molar ratios and the successful synthesis was confirmed using ¹H NMR and FTIR spectroscopies. The safety of the newly synthesised polymer derivatives was assessed with in vivo planaria assays and in vitro MTT assay utilising Caco-2 cell line. The synthesized maleimide-functionalised HEC solutions were sprayed onto blank tablets to develop a model dosage form. The physical properties and mucoadhesive behavior of these tablets were evaluated using a tensile test with sheep buccal mucosa. The maleimide-functionalised HEC exhibited superior mucoadhesive properties compared to unmodified HEC.

Multiresponsive Keratin-Polysulfobetaine Conjugate-Based Micelles as Drug Carriers with a Prolonged Circulation Time

A protein-polymer conjugate combines the chemical properties of a synthetic polymer chain with the biological properties of a protein. In this study, the initiator terminated with furan-protected maleimide was first synthesized through three steps. Then, a series of zwitterionic poly[3-dimethyl(methacryloyloxyethyl)ammonium propanesulfonate] (PDMAPS) was synthesized via atom transfer radical polymerization (ATRP) and optimized. Subsequently, well-controlled PDMAPS was conjugated with keratin via thiol-maleimide Michael addition. The keratin-PDMAPS conjugate (KP) could self-assemble in an aqueous solution to form micelles with low critical micelle concentration (CMC) values and good blood compatibility. The drug-loaded micelles exhibited triple responsiveness to pH, glutathione (GSH), and trypsin under tumor microenvironments. In addition, these micelles showed high toxicity against A549 cells while low toxicity on normal cells. Furthermore, these micelles performed prolonged blood circulation.

Nanotechnology based drug delivery systems for the treatment of anterior segment eye diseases

Diseases affecting the anterior segment of the eye are the primary causes of vision impairment and blindness globally. Drug administration through the topical ocular route is widely accepted because of its user/patient friendliness - ease of administration and convenience. However, it remains a significant challenge to efficiently deliver drugs to the eye through this route because of various structural and physiological constraints that restrict the distribution of therapeutic molecules into the ocular tissues. The bioavailability of topically applied ocular medications such as eye drops is typically less than 5%. Developing novel delivery systems to increase the retention time on the ocular surfaces and permeation through the cornea is one of the approaches adopted to boost the bioavailability of topically administered medications. Drug delivery systems based on nanotechnology such as micelles, nanosuspensions, nanoparticles, nanoemulsions, liposomes, dendrimers, niosomes, cubosomes and nanowafers have been investigated as effective alternatives to conventional ocular delivery systems in treating diseases of the anterior segment of the eye. This review discussed different nanotechnology-based delivery systems that are currently investigated for treating and managing diseases affecting the anterior ocular tissues. We also looked at the challenges in translating these systems into clinical use and the prospects of nanocarriers as a vehicle for the delivery of phytoactive compounds to the anterior segment of the eye.

Surface Modification of Silica Particles with Adhesive Functional Groups or Their Coating with Chitosan to Improve the Retention of Toothpastes in the Mouth

Silica is widely used in the oral care formulations to act as an abrasive and to give the products its distinct physical properties. In this study, silica particles were synthesized using a co-condensation of tetraethyl orthosilicate with a series of functional silane compounds [(3-mercaptopropyl)trimethoxysilane, (3-glycidyloxypropyl)trimethoxysilane, and (3-acryloxypropyl)trimethoxysilane)]. The surface of the particles based on tetraethyl orthosilicate and (3-glycidyloxypropyl)trimethoxysilane was then further modified with 3-aminophenylboronic acid. Commercial Aerosil R972 Pharma silica particles were also coated with chitosan. Additionally, commercially available (3-maleimido)propyl-functionalized silica particles were used in this study. All these functionalized silica particles were incorporated into toothpaste formulations, and their retentive properties were tested on ex vivo sheep tongue mucosa models using fluorescent microscopy-based flow-through techniques. Those surfaces with chitosan, phenylboronic acid, and acryloyl groups were shown to provide a significant improvement in the retention of the oral care formulations during the retention testing. The retention of toothpastes containing silica functionalized with maleimide and thiol groups was also superior compared to that of unmodified silica particles. This study synthesized and tested a range of silica particles and demonstrated that the functionalized silica incorporated into toothpastes can significantly improve the retention of these formulations on oral mucosal surfaces.

Liposomes for Tumor Targeted Therapy: A Review

Liposomes, the most widely studied nano-drug carriers in drug delivery, are sphere-shaped vesicles consisting of one or more phospholipid bilayers. Compared with traditional drug delivery systems, liposomes exhibit prominent properties that include targeted delivery, high biocompatibility, biodegradability, easy functionalization, low toxicity, improvements in the sustained release of the drug it carries and improved therapeutic indices. In the wake of the rapid development of nanotechnology, the studies of liposome composition have become increasingly extensive. The molecular diversity of liposome composition, which includes long-circulating PEGylated liposomes, ligand-functionalized liposomes, stimuli-responsive liposomes, and advanced cell membrane-coated biomimetic nanocarriers, endows their drug delivery with unique physiological functions. This review describes the composition, types and preparation methods of liposomes, and discusses their targeting strategies in cancer therapy.

Maleimide-Decorated PEGylated Mucoadhesive Liposomes for Ocular Drug Delivery

Liposomes are promising spherical vesicles for topical drug delivery to the eye. Several types of vesicles were formulated in this study, including conventional, PEGylated, and maleimide-decorated PEGylated liposomes. The physicochemical characteristics of these liposomes, including their size, zeta potential, ciprofloxacin encapsulation efficiency, loading capacity, and release, were evaluated. The structure of these liposomes was examined using dynamic light scattering, transmission electron microscopy, and small angle neutron scattering. The ex vivo corneal and conjunctival retention of these liposomes were examined using the fluorescence flow-through method. Maleimide-decorated liposomes exhibited the best retention performance on bovine conjunctiva compared to other types of liposomes studied. Poor retention of all liposomal formulations was observed on bovine cornea.

Nano-Formulation Based Intravesical Drug Delivery Systems: An Overview of Versatile Approaches to Improve Urinary Bladder Diseases

Intravesical drug delivery is a direct drug delivery approach for the treatment of various bladder diseases. The human urinary bladder has distinctive anatomy, making it an effective barrier against any toxic agent seeking entry into the bloodstream. This screening function of the bladder derives from the structure of the urothelium, which acts as a semi-permeable barrier. However, various diseases related to the urinary bladder, such as hyperactive bladder syndrome, interstitial cystitis, cancer, urinary obstructions, or urinary tract infections, can alter the bladder’s natural function. Consequently, the intravesical route of drug delivery can effectively treat such diseases as it offers site-specific drug action with minimum side effects. Intravesical drug delivery is the direct instillation of medicinal drugs into the urinary bladder via a urethral catheter. However, there are some limitations to this method of drug delivery, including the risk of washout of the therapeutic agents with frequent urination. Moreover, due to the limited permeability of the urinary bladder walls, the therapeutic agents are diluted before the process of permeation, and consequently, their efficiency is compromised. Therefore, various types of nanomaterial-based delivery systems are being employed in intravesical drug delivery to enhance the drug penetration and retention at the targeted site. This review article covers the various nanomaterials used for intravesical drug delivery and future aspects of these nanomaterials for intravesical drug delivery.

Unexpected kinetically controlled organoselenium-based isomaleimide: X-ray structure, hirshfeld surface analysis, 3D energy framework approach, and density functional theory calculation

Reduction of 4,4′-diselanediyldianiline (1) followed by the reaction with bromo-4-(bromomethyl)benzene afforded the corresponding 4-((4-bromobenzyl)selanyl)aniline (2) in 85% yield. N-Maleanilic acid 3 was obtained in 94% yield via the reaction of selenoamine 2 with toxilic anhydride. Subsequent dehydration of N-maleanilic acid 3 using acetic anhydride furnished the unexpected isomaleimide 5-((4-((4-bromophenyl)selanyl)phenyl)imino)furan-2(5H)-one (4) instead of the maleimide 5. The molecular structure of compound 4 was confirmed by mass spectrometry, ¹H- and ¹³C-NMR spectroscopy, and X-ray diffraction analysis. Their cytotoxicity was assessed against two oligodendrocytes, and their respective redox properties were evaluated using 2′,7′-dichlorodihydrofluorescein diacetate (H2-DCFDA) assay. Furthermore, their antiapoptotic potential was also evaluated by flow cytometry. The compound crystallizes in triclinic P-1 space group with unit cell parameters a = 5.7880 (4) Å, b = 9.8913 (6) Å, c = 14.5951 (9) Å, V = 1731.0 (3) Å³ and Z = 2. The crystal packing is stabilized by intermolecular hydrogen bonding, π···π, C-Br···π stacking interactions, and other non-covalent interactions. The mapping of different Hirshfeld surfaces and 2D-fingerprint were used to investigate intermolecular interactions. The interaction energies that stabilize the crystal packing were calculated and graphically represented as framework energy diagrams. We present a computational investigation of compound 4’s molecular structure at the Density Functional Theory level using the B3LYP method and the 6-31G ++ basis set in this paper. The optimized structure matches the experimental outcome. The global reactivity descriptors and molecular electrostatic potential (M.E.P.) map emphasize the molecule’s reactive locations, allowing reactivity prediction. The charge transfer properties of molecules can be estimated by examining Frontier molecular orbitals.

Aldehyde-functional thermoresponsive diblock copolymer worm gels exhibit strong mucoadhesion

A series of thermoresponsive diblock copolymer worm gels is prepared via reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate using a water-soluble methacrylic precursor bearing pendent cis-diol groups. Selective oxidation using an aqueous solution of sodium periodate affords the corresponding aldehyde-functional worm gels. The aldehyde groups are located within the steric stabilizer chains and the aldehyde content can be adjusted by varying the periodate/cis-diol molar ratio. These aldehyde-functional worm gels are evaluated in terms of their mucoadhesion performance with the aid of a fluorescence microscopy-based assay. Using porcine urinary bladder mucosa as a model substrate, we demonstrate that these worm gels offer a comparable degree of mucoadhesion to that afforded by chitosan, which is widely regarded to be a 'gold standard' positive control in this context. The optimum degree of aldehyde functionality is approximately 30%: lower degrees of functionalization lead to weaker mucoadhesion, whereas higher values compromise the desirable thermoresponsive behavior of these worm gels.

Mucoadhesive phenylboronic acid conjugated chitosan oligosaccharide-vitamin E copolymer for topical ocular delivery of voriconazole: Synthesis, in vitro/vivo evaluation, and mechanism

Topical eye drops still face challenges of low-drug treatment effects and frequent dosing in ophthalmic applications due to the low preocular retention rate and low transcorneal permeability. Thus, we designed and synthesized a phenylboronic acid conjugated chitosan oligosaccharide-vitamin E copolymer (PBA-CS-VE) for use in mucoadhesive voriconazole (VRC)-loaded nanomicelles for fungal keratitis. In vitro mucin binding and ex vivo eyeball adhesion tests show that the copolymer has strong mucoadhesion. The transportation of coumarin-6 (C6) across a monolayer of HCE-T cells and 3D cell spheroids confirm the strong corneal penetration ability of PBA-CS-VE. The mechanism of promoting corneal penetration was studied in terms of intracellular calcium-ion concentration, cell membrane potential, cell membrane fluidity, and the tight junctions of cells. The pharmacokinetics in the aqueous humor were examined to evaluate the ability of nanomicelles in promoting corneal penetration and prolonging ocular retention. VRC-loaded PBA-CS-VE nanomicelles (PBA-CS-VE-VRC) yielded a very favorable therapeutic effect on a rabbit model of fungal keratitis in vivo as compared to the free drug. Overall, the results indicate that PBA-CS-VE nanomicelles are a mucoadhesive candidate with enhanced transcorneal permeability and prolonged preocular retention for efficient delivery of topical ocular drugs. STATEMENT OF SIGNIFICANCE: Although eye drops are widely used in ocular drug delivery, the disadvantages such as short retention time and weak corneal penetrating ability still seriously affect the therapeutic effect of the drug. Therefore, the mucoadhesive carrier seems to be an interesting strategy for ocular drug delivery. Herein, a novel phenylboronic acid conjugated chitosan oligosaccharide-vitamin E copolymer was designed and constructed as mucoadhesive nanomicelles loaded with voriconazole for fungal keratitis. These nanomicelles were able to improve the in vitro mucin binding and to prolong the residence time of the drug on the surface of the eyeball. Moreover, the nanomicelles exhibited an enhanced drug permeability in cell monolayer models and 3D cell culture models. This work provides a promising ocular drug delivery system.

Maleimide-functionalized phospholipid/Pluronic F127 mixed micelles for efficient ophthalmic delivery of voriconazole against Candida albicans

Drugs that are topically applied on the eyes have low bioavailability, which has always been an important problem. In this study, maleimide functionalized, voriconazole (VCZ) loaded mixed micelles (Mal-VCZ-MM) were designed. Pluronic F127 and phospholipid were used as materials, and maleimide was used as an adhesive. The prepared Mal-VCZ-MM was nearly spherical with a particle size of 84.45 ± 1.39 nm and a zeta potential of - 20.3 ± 0.29 mV. The encapsulation efficiency of Mal-VCZ-MM was 95.33 ± 0.06%, and it had high stability with a critical micelle concentration value of 1.28 × 10^-4 mg/mL. CCK-8 assay showed that its cytotoxicity was lower than that of free VCZ solution (VCZ-Sol). Both quantitative and qualitative analyses of the HCE-T cellular uptake showed that the cellular internalization of Mal-C6-MM was significantly stronger than that of C6-MM. The endocytosis pathway was macropinocytosis-mediated, cavernous-mediated, and energy-dependent. In vitro results against Candida albicans showed that the diameters of the antifungal inhibition zones of VCZ-Sol, VCZ-MM, and Mal-VCZ-MM were 15.5 ± 0.50 mm, 24.0 ± 0.71 mm, and 31.5 ± 1.12 mm, respectively. The antifungal effect of Mal-VCZ-MM was significantly higher than that of VCZ-Sol and VCZ-MM (P < 0.001). This study shows that Mal-VCZ-MM is a highly effective hydrophobic ophthalmic drug-delivery carrier that can improve the therapeutic effect of the drug.

A review: Gelatine as a bioadhesive material for medical and pharmaceutical applications

Bioadhesive polymers offer versatility to medical and pharmaceutical inventions. The incorporation of such materials to conventional dosage forms or medical devices may confer or improve the adhesivity of the bioadhesive systems, subsequently prolonging their residence time at the site of absorption or action and providing sustained release of actives with improved bioavailability and therapeutic outcomes. For decades, much focus has been put on scientific works to replace synthetic polymers with biopolymers with desirable functional properties. Gelatine has been considered one of the most promising biopolymers. Despite its biodegradability, biocompatibility and unique biological properties, gelatine exhibits poor mechanical and adhesive properties, limiting its end-use applications. The chemical modification and blending of gelatine with other biomaterials are strategies proposed to improve its bioadhesivity. Here we discuss the classical approaches involving a variety of polymer blends and composite systems containing gelatine, and gelatine modifications via thiolation, methacrylation, catechol conjugation, amination and other newly devised strategies. We highlight several of the latest studies on these strategies and their relevant findings.

Colloidal nanosystems with mucoadhesive properties designed for ocular topical delivery

Over the last years, the scientific interest about topical ocular delivery targeting the posterior segment of the eye has been increasing. This is probably due to the fact that this is a non-invasive administration route, well tolerated by patients and with fewer local and systemic side effects. However, it is a challenging task due to the external ocular barriers, tear film clearance, blood flow in the conjunctiva and choriocapillaris and due to the blood-retinal barriers, amongst other features. An enhanced intraocular bioavailability of drugs can be achieved by either improving corneal permeability or by improving precorneal retention time. Regarding this last option, increasing residence time in the precorneal area can be achieved using mucoadhesive polymers such as xyloglucan, poly(acrylate), hyaluronic acid, chitosan, and carbomers. On the other hand, colloidal particles can interact with the ocular mucosa and enhance corneal and conjunctival permeability. These nanosystems are able to deliver a wide range of drugs, including macromolecules, providing stability and improving ocular bioavailability. New pharmaceutical approaches based on nanotechnology associated to bioadhesive compounds have emerged as strategies for a more efficient treatment of ocular diseases. Bearing this in mind, this review provides an overview of the current mucoadhesive colloidal nanosystems developed for ocular topical administration, focusing on their advantages and limitations.

Annulation of Enals with Carbamoylpropiolates via NHC-Catalyzed Enolate Pathway: Access to Functionalized Maleimides/Iso-maleimides and Synthesis of Aspergillus FH-X-213

Herein we report the N-heterocyclic carbene (NHC)-catalyzed [3 + 2] annulation of α,β-unsaturated aldehydes with carbamoylpropiolates via an unusual enolate pathway leading to the construction of highly functionalized maleimides or isomaleimides. The electronic effect imposed by the alkyl/aryl group present on the amide nitrogen of carbamoylpropiolates plays a crucial role in the selective formation of these important five-membered heterocyclic building blocks. The developed protocol is mild and tolerates a wide range of substituents on both substrates. The application of this protocol in the synthesis of the antibacterial natural product Aspergillus FH-X-213 has also been demonstrated.

A chitosan-based nanosystem as pneumococcal vaccine delivery platform

Chitosan-based nanosystems have been described as interesting tools for antigen delivery and for enhancing the immunogenicity of nasally administered vaccines. As a possible vaccine delivery method, the chemical conjugation of chitosan nanocapsules with the Streptococcus pneumoniae cell membrane protein PsaA (pneumococcal surface adhesin A) is suggested here. The antigen PsaA, common to all pneumococcus serotypes, is expected to improve its uptake by immune cells and to activate specific T cells, generating an adaptive immune response against pneumococcus. With this aim, chitosan nanocapsules with thiol-maleimide conjugation between the polymer (chitosan) and the antigen (PsaA) were designed to enable the surface presentation of PsaA for immune cell recognition. Spherical-shaped particles, with a size of 266 ± 32 nm, positive charge of +30 ± 1 mV, and good stability profiles in simulated nasal fluids (up to 24 h) were achieved. PsaA association rates were three times higher compared with nanocapsules without covalent polymer-protein conjugation. Cytotoxicity studies in cell culture media showed non-toxic effect under 150 µg/mL concentration of nanocapsules, and subsequent studies on the maturation of immature dendritic cells in the presence of antigen-conjugated nanocapsules displayed peripheral blood mononuclear cell activation and lymphocyte differentiation after their presentation by dendritic cells. Secretion of TNFα following exposure to nanocapsules and the ability of nanocapsules to activate CD4 and CD8 T lymphocytes had also been studied. Antigen loaded nanocarrier uptake and presentation by professional presenting cells.

Catechol-Functionalized Alginate Nanoparticles as Mucoadhesive Carriers for Intravesical Chemotherapy

This research aimed to synthesize and evaluate mucoadhesive catechol-functionalized alginate (Cat-Alg) nanoparticles (NPs) for bladder cancer. Cat-Alg was synthesized using coupling chemistry, and the structure was verified using NMR and FT-IR. Cat-Alg NPs were generated by ionic gelation between the synthesized Cat-Alg and calcium chloride. Garcinia mangostana L. extract (GM extract) was entrapped into the NPs during particle formation. The physical characteristics, mucoadhesive properties, drug loading and release, cellular uptake, and anticancer activity of the GM extract-loaded NPs were investigated. The Cat-Alg NPs were spherical with sizes in the range of 155-186 nm. The slightly negative surface charge of the NPs provided them with excellent stability. The Cat-Alg NPs could be retained on a porcine bladder mucosa to a greater extent compared with unmodified Alg NPs. High loading efficiency (71.6%) and loading capacity (292 μg/mg) of GM extract in the NPs were achieved, and a constant release of GM extract was obtained for up to 8 h with zero-order kinetics. Moreover, the GM extract-loaded NPs were deposited in bladder tissue and accumulated in MB49 cells at a higher rate compared with GM extract suspension. In addition, the NPs could kill a mouse urothelial carcinoma cell line with low IC₅₀. Therefore, these NPs have the potential to be a mucoadhesive drug delivery system for bladder cancer treatment. However, additional in vivo investigations are needed for clinical application in cancer treatment. Graphical abstract.

Recent Advancements in Using Polymers for Intestinal Mucoadhesion and Mucopenetration

Oral administration of actives is the most desired form of delivery, but the formulations need to overcome a variety of barriers including the intestinal mucus. This feature article summarizes the developments from the past 2-3 years in this context focusing on polymer-based formulations. The progress in assembling mucopenetrating nanoparticles is outlined considering coatings using noninteracting polymers as well as virus-like particles and charge-shifting particles. Next, polymers and their modification to enhance mucoadhesion are discussed, followed by providing examples of double-encapsulation systems that aim to combine mucopenetration with mucoadhesion in the same formulation. Finally, a short outlook is provided highlighting a few of the most pressing challenges to address.

Ocular penetration of fluorometholone-loaded PEG-PLGA nanoparticles functionalized with cell-penetrating peptides

Aim: Development of fluorometholone-loaded PEG-PLGA nanoparticles (NPs) functionalized with cell-penetrating peptides (CPPs) for the treatment of ocular inflammatory disorders. Materials & methods: Synthesized polymers and peptides were used for elaboration of functionalized NPs, which were characterized physicochemically. Cytotoxicity and ability to modulate the expression of proinflammatory cytokines were evaluated in vitro using human corneal epithelial cells (HCE-2). NPs uptake was assayed in both in vitro and in vivo models. Results: NPs showed physicochemical characteristics suitable for ocular administration without evidence of cytotoxicity. TAT-NPs and G2-NPs were internalized and displayed anti-inflammatory activity in both HCE-2 cells and mouse eye. Conclusion: TAT-NPs and G2-NPs could be considered a novel strategy for the treatment of ocular inflammatory diseases of the anterior and posterior segment.

Maleimide-functionalised PLGA-PEG nanoparticles as mucoadhesive carriers for intravesical drug delivery

Low permeability of the urinary bladder epithelium, poor retention of the chemotherapeutic agents due to dilution and periodic urine voiding as well as intermittent catheterisations are the major limitations of intravesical drug delivery used in the treatment of bladder cancer. In this work, maleimide-functionalised poly(lactide-co-glycolide)-block-poly(ethylene glycol) (PLGA-PEG-Mal) nanoparticles were developed. Their physicochemical characteristics, including morphology, architecture and molecular parameters have been investigated by means of dynamic light scattering, transmission electron microscopy and small-angle neutron scattering techniques. It was established that the size of nanoparticles was dependent on the solvent used in their preparation and molecular weight of PEG, for example, 105 ± 1 nm and 68 ± 1 nm particles were formed from PLGA_20K-PEG_5K in dimethyl sulfoxide and acetone, respectively. PLGA-PEG-Mal nanoparticles were explored as mucoadhesive formulations for drug delivery to the urinary bladder. The retention of fluorescein-loaded nanoparticles on freshly excised lamb bladder mucosa in vitro was evaluated and assessed using a flow-through fluorescence technique and Wash Out₅₀ (WO₅₀) quantitative method. PLGA-PEG-Mal nanoparticles (NPs) exhibited greater retention on urinary bladder mucosa (WO₅₀ = 15 mL) compared to maleimide-free NPs (WO₅₀ = 5 mL). The assessment of the biocompatibility of PEG-Mal using the slug mucosal irritation test revealed that these materials are non-irritant to mucosal surfaces.

Catechol-Functionalized Succinyl Chitosan for Novel Mucoadhesive Drug Delivery

The objective of this research was to synthesized and evaluated a mucoadhesive catechol-bearing succinyl chitosan (Cat-SCS) as an innovative mucoadhesive substance for a mucoadhesive drug delivery system. Succinyl chitosan (SCS) was synthesized via ring-opening reactions with succinic anhydride. The Cat-SCS was then synthesized by reacting SCS with dopamine with the existence of N-(3-Dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride (EDAC) and N-hydroxysulfosuccinimide (NHS). The successful functionalization of catechol onto chitosan backbone was verified using nuclear magnetic resonance spectroscopy (NMR) and Fourier transform infrared spectroscopy (FT-IR). Mucoadhesion studies were performed using rheology measurement and ex-vivo mucoadhesion test. The findings exposed that the synthesized Cat-SCS exhibited excellent mucoadhesive properties which was better than the intact CS. Further indirect studies verified the occurrence of polymer-mucin glycoproteins interactions. The catechol content of catechol moiety on the Cat-SCS was determined to be 0.377 using the 1H NMR. The cytotoxicity test indicated the biocompatibility of the obtained polymer on human gingival fibroblast cells (HGF cells). Therefore, these results could advocate the capacity to use of Cat-SCS as an innovative mucoadhesive platform for mucoadhesive drug delivery.

Progress and Current Trends in the Synthesis of Novel Polymers with Enhanced Mucoadhesive Properties

Mucoadhesion is defined as the adherence of a synthetic or natural polymer to a mucosal membrane via physical or chemical interactions. Mucoadhesive materials are widely used to develop dosage forms for transmucosal drug delivery via ocular, nasal, esophageal, oral, vaginal, rectal, and intravesical routes of administration. This review will discuss some of the most prominent and recent synthetic methodologies employed to modify polymeric materials in order to enhance their mucoadhesive properties. This includes chemical conjugation of polymers with molecules bearing thiol-, catechol-, boronate-, acrylate-, methacrylate-, maleimide-, and N-hydroxy(sulfo)succinimide ester- groups.

Crossing biological barriers with nanogels to improve drug delivery performance

The current limitations in the use of nanocarriers to treat constantly evolving diseases call for the design of novel and smarter drug delivery systems (DDS). Nanogels (NGs) are three-dimensional crosslinked polymers with dimensions on the nanoscale and with a great potential for use in the biomedical field. Particular interest focuses on their application as DDS to minimize severe toxic effects and increase the therapeutic index of drugs. They have recently gained attention, since they can include responsive modalities within their structure, which enable them to excerpt a therapeutic function on demand. Their bigger sizes and controlled architecture and functionality, when compared to non-crosslinked polymers, make them particularly interesting to explore novel modalities to cross biological barriers. The present review summarizes the most significant developments of NGs as smart carriers, with focus on smart modalities to cross biological barriers such as cellular membrane, tumor stroma, mucose, skin, and blood brain barrier. We discuss the properties of each barrier and highlight the importance that the NG design has on their capability to overcome them and deliver the cargo at the site of action.

Acrylated Eudragit® E PO as a novel polymeric excipient with enhanced mucoadhesive properties for application in nasal drug delivery

Eudragit® E PO (EPO) is a terpolymer based on N,N-dimethylaminoethyl methacrylate with methylmethacrylate and butylmethacrylate, produced by Evonik Industries AG as a pharmaceutical excipient. In this work, EPO was chemically modified through reaction with acryloyl chloride. The successful modification of EPO was confirmed by FTIR, NMR-spectroscopy, elemental and thermal analysis. The degree of acrylation was determined by permanganatometric titration. The slug mucosal irritation test was used to demonstrate non-irritant nature of EPO and its acrylated derivatives (AEPO). The mucoadhesive properties of EPO and AEPO were evaluated using freshly excised sheep nasal mucosa and it was demonstrated that acrylated polymers facilitated greater retention of sodium fluorescein on mucosal surfaces compared to solution mixture of this dye solution with EPO as well as free dye.

Methacrylated chitosan as a polymer with enhanced mucoadhesive properties for transmucosal drug delivery

Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties which allow it to adhere to mucosal tissues. In this work, we explored chemical modification of chitosan through its reaction with methacrylic anhydride to synthesise methacrylated derivative with the aim to improve its mucoadhesive properties. The reaction products were characterised using ¹H NMR, FTIR and UV-Vis spectroscopy. ¹H NMR and ninhydrin test were used to quantify the degree of methacrylation of chitosan. Turbidimetric analysis of the effect of pH on aqueous solubility of the polymers revealed that the highly methacrylated derivative remained turbid and its turbidity did not change from pH 3 to 9. However, solutions of native chitosan and its derivative with low methacrylation remained transparent at pH 6.5 and exhibited a rapid increase in turbidity at pH > 6.5. The mucoadhesive properties of chitosan and its methacrylated derivatives were evaluated using flow-through method combined with fluorescent microscopy with fluorescein sodium as a model drug. The retention of these polymers was evaluated on porcine bladder mucosa in vitro. The methacrylated derivatives exhibited greater ability to retain fluorescein sodium on the bladder mucosa compared to the parent chitosan. Toxicological studies using MTT assay with UMUC3 bladder cells show no significant differences in toxicity between chitosan and its methacrylated derivatives suggesting good biocompatibility of these novel mucoadhesive polymers.

Synthesis of thiolated, PEGylated and POZylated silica nanoparticles and evaluation of their retention on rat intestinal mucosa in vitro

In this study, we synthesised thiolated silica nanoparticles using 3-mercaptopropyltrimethoxysilane and functionalised them with either 5 kDa methoxy polyethylene glycol maleimide (PEG) or 5 kDa alkyne-terminated poly(2-ethyl-2-oxazoline) (POZ). The main objectives of this study are to investigate the effects of pH on the size and ξ-potential of these nanoparticles and evaluate their mucoadhesive properties ex vivo using rat intestinal mucosa. The sizes of thiolated, PEGylated and POZylated silica nanoparticles were 53 ± 1, 68 ± 1 and 59 ± 1 nm, respectively. The size of both thiolated and POZylated nanoparticles significantly increased at pH ≤ 2, whereas no size change was observed at pH 2.5-9 for both these two types of nanoparticles. On the other hand, the size of PEGylated nanoparticles did not change over the studied pH range (1.5-9). Moreover, thiolated nanoparticles were more mucoadhesive in the rat small intestine than both PEGylated and POZylated nanoparticles. After 12 cycles of washing (with a total of 20 mL of phosphate buffer solution pH 6.8), a significantly greater amount of thiolated nanoparticles remained on the intestinal mucosa than FITC-dextran (non-mucoadhesive polymer, p < 0.005) and both PEGylated and POZylated nanoparticles (p < 0.05 both). However, both PEGylated and POZylated nanoparticles showed similar retention to FITC-dextran (p > 0.1 for both). Thus, this study indicates that thiolated nanoparticles are mucoadhesive, whereas PEGylated and POZylated nanoparticles are non-mucoadhesive in the ex vivo rat intestinal mucosa model. Each of these nanoparticles has potential applications in mucosal drug delivery.

Chitosan and Its Derivatives for Application in Mucoadhesive Drug Delivery Systems

Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major drawbacks of its use. Chemical modification of chitosan has been exploited to tackle these two issues. In this review, we highlight the up-to-date studies involving the synthetic approaches and description of mucoadhesive properties of chitosan and chitosan derivatives. These derivatives include trimethyl chitosan, carboxymethyl chitosan, thiolated chitosan, chitosan-enzyme inhibitors, chitosan-ethylenediaminetetraacetic acid (chitosan-EDTA), half-acetylated chitosan, acrylated chitosan, glycol chitosan, chitosan-catechol, methyl pyrrolidinone-chitosan, cyclodextrin-chitosan and oleoyl-quaternised chitosan. We have particularly focused on the effect of chemical derivatization on the mucoadhesive properties of chitosan. Additionally, other important properties including water-solubility, stability, controlled release, permeation enhancing effect, and in vivo performance are also described.

Beyond PEGylation: Alternative surface-modification of nanoparticles with mucus-inert biomaterials

Mucus is a highly hydrated viscoelastic gel present on various moist surfaces in our body including the eyes, nasal cavity, mouth, gastrointestinal, respiratory and reproductive tracts. It serves as a very efficient barrier that prevents harmful particles, viruses and bacteria from entering the human body. However, the protective function of the mucus also hampers the diffusion of drugs and nanomedicines, which dramatically reduces their efficiency. Functionalisation of nanoparticles with low molecular weight poly(ethylene glycol) (PEGylation) is one of the strategies to enhance their penetration through mucus. Recently a number of other polymers were explored as alternatives to PEGylation. These alternatives include poly(2-alkyl-2-oxazolines), polysarcosine, poly(vinyl alcohol), other hydroxyl-containing non-ionic water-soluble polymers, zwitterionic polymers (polybetaines) and mucolytic enzymes. This review discusses the studies reporting the use of these polymers or potential application to facilitate mucus permeation of nanoparticles.

Alginate modified with maleimide-terminated PEG as drug carriers with enhanced mucoadhesion

The goal of this study was to generate a new mucoadhesive carbohydrate-based delivery system composed of alginate (Alg) backbone covalently attached to polyethylene glycol (PEG) modified with a unique functional end-group (maleimide). The immobilization of PEG-maleimide chains significantly improved the mucoadhesion properties attributed to thioether bonds creation via Michael-type addition and hydrogen bonding with the mucus glycoproteins. Mucoadhesion studies using tensile and rotating cylinder assays revealed a 3.6-fold enhanced detachment force and a 2.8-fold enhanced retention time compared to the unmodified polymer, respectively. Additional indirect studies confirmed the presence of polymer-mucus glycoproteins interactions. Drug release experiments were used to evaluate the release profiles from Alg-PEG-maleimide tablets in comparison to Alg and Alg-SH tablets. Viability studies of normal human dermal fibroblasts cells depicted the non-toxic nature of Alg-PEG-maleimide. Overall, our studies disclose that PEG-maleimide substitutions on other biocompatible polymers can lead to the development of useful biomaterials for diverse biomedical applications.