Characterization of critical parameters using an air-liquid interface model with RPMI 2650 cells for permeability studies of small molecules

The field of nasal drug delivery gained enormously on interest over the past decade. Performing nasal in vivo studies is expensive and time-consuming, but also unfeasible for an initial high-throughput compound and formulation screening. Therefore, the development of fast and high-throughput in vitro models to screen compounds for their permeability through the nasal epithelium and mucosa is constantly expanding. Yet, the protocols used for nasal in vitro permeability studies are varying, which limits the comparability and reproducibility of generated data. This project aimed to elucidate the influence of different culture and assay parameters of RPMI 2650 cells grown under air-liquid interface (ALI) conditions on the transepithelial electrical resistance (TEER) and apparent permeability (Papp) values of five selected reference compounds, covering the range of low to moderate to high permeability. The influence of the passage number, seeding density, and timepoint of airlift was minimal in our approach, while the substrate pore density had a significant influence on the Papp values of carbamazepine, propranolol, and metoprolol, classified as highly permeable compounds, but not on atenolol and aciclovir. Elevation of the experimental concentration of carbamazepine, propranolol, and metoprolol in the donor compartment had an increasing effect on the Papp values, while prolonging the assay time did not have a significant influence. Based on the results reported here, RPMI 2650 cells cultured under ALI conditions offer the possibility of a standardized high-throughput screening model for small molecules and their formulations for in vitro drug permeation studies to predict and select optimal conditions for their nasal delivery.

Intranasal delivery of herbal medicine for disease treatment: A systematic review

BACKGROUND

Intranasal administration has been adopted in traditional medicine to facilitate access to the bloodstream and central nervous system (CNS). In modern medicine, nasal drug delivery systems are valuable for disease treatment because of their noninvasiveness, good absorption, and fast-acting effects.

OBJECTIVE

This study aimed to systematically organize preclinical and clinical studies on intranasal herbal medicines to highlight their potential in drug development.

METHODS

A comprehensive search for literature until February 2023 was conducted on PubMed and the Web of Science. From the selected publications, we extracted key information, including the types of herbal materials, target diseases, intranasal conditions, methods of toxicity evaluation, main outcomes, and mechanisms of action, and performed quality assessments for each study.

RESULTS

Of the 45 studies, 13 were clinical and 32 were preclinical; 28 studies used herbal extracts, 9 used prescriptions, and 8 used natural compounds. The target diseases were rhinosinusitis, influenza, fever, stroke, migraine, insomnia, depression, memory disorders, and lung cancer. The common intranasal volumes were 8-50 µl in mice, 20-100 µl in rats, and 100-500 µl in rabbits. Peppermint oil, Ribes nigrum folium, Melia azedarach L., Elaeocarpus sylvestris, Radix Bupleuri, Da Chuan Xiong Fang, Xingnaojing microemulsion, and Ginsenoside Rb1 emerged as potential candidates for rapid intranasal therapy. The in vivo toxicity assessments were based on mortality, body weight, behavioral changes, mucociliary activity, histopathology, and blood tests. Most intranasal treatments were safe, except for Cyclamen europaeum, Jasminum sambac, Punica granatum L., and violet oil, which caused mild adverse effects. At lower doses, intranasal herbal treatments often show greater effects than oral administration. The actions of intranasal herbal medicine mainly involve regulating inflammation and neurotransmission, with the olfactory bulb and anterior cingulate cortex to be relevant brain regions.

CONCLUSION

Intranasal delivery of herbal materials holds promise for enhancing drug delivery efficacy and reducing treatment duration, offering a potential future perspective for developing intranasal therapies for various diseases.

Nasal delivery of encapsulated recombinant ACE2 as a prophylactic drug for SARS-CoV-2

Angiotensin-converting enzyme 2 (ACE2) is responsible for cell fusion with SARS-CoV viruses. ACE2 is contained in different areas of the human body, including the nasal cavity, which is considered the main entrance for different types of airborne viruses. We took advantage of the roles of ACE2 and the nasal cavity in SARS-CoV-2 replication and transmission to develop a nasal dry powder. Recombinant ACE2 (rhACE2), after a proper encapsulation achieved via spray freeze drying, shows a binding efficiency with spike proteins of SARS-CoV-2 higher than 77 % at quantities lower than 5 µg/ml. Once delivered to the nose, encapsulated rhACE2 led to viability and permeability of RPMI 2650 cells of at least 90.20 ± 0.67 % and 47.96 ± 4.46 %, respectively, for concentrations lower than 1 mg/ml. These results were validated using nasal dry powder containing rhACE2 to prevent or treat infections derived from SARS-CoV-2.

Facile fabrication of diatomite biosilica-based nasal drug delivery vehicle for enhanced treatment of allergic rhinitis

Nanostructured silica-based materials have great potential as drug delivery vehicles for precise and personalized medical applications. As natural nanostructured silica, diatomite biosilica (DB) is recognized as a novel carrier to construct oral/parenteral smart drug delivery systems due to high surface area, biocompatibility, and applicability at low cost, yet the related studies on its use in local delivery routes are still scarce. Herein, we proposed a novel strategy to develop multifunctional nasal drug delivery vehicles based on DB, and demonstrated their versatile performance for enhanced treatment of allergic rhinitis (AR). As a proof of concept, the purified DB microparticles were loaded with budesonide as an anti-inflammatory model drug, and further processed via surface modification to graft polydopamine and carboxymethyl chitosan layers. The synthesized microcapsules exhibited remarkable mucin binding capacity and antibacterial activity against Staphylococcus aureus. Besides, toxicity evaluation with human skin fibroblast cells and hemolysis tests indicated their high biocompatibility. Moreover, in vitro drug release results demonstrated pH-responsive release performance of the microcapsules under simulated AR environment (pH 5.0, 35 °C). Hence, this study provides a facile and reliable approach to construct DB-based mucoadhesive nasal drug delivery vehicles, showing great potential for treatment of allergic airway inflammatory diseases.

W/O/W Microemulsions for Nasal Delivery of Hydrophilic Compounds: A Preliminary Study

The administration of hydrophilic therapeutics has always been a great challenge because of their low bioavailability after administration. For this purpose, W/O/W microemulsion resulted to be a potential successful strategy for the delivery of hydrophilic compounds, interesting for the nasal mucosal therapy. Herein, an optimized biphasic W/O microemulsion was designed, through a preliminary screening, and it was inverted in a triphasic W/O/W microemulsion, intended for the nasal administration. In order to enhance the mucosal retention, surface modification of the biphasic W/O microemulsion was performed adding didodecyldimethylammonium bromide, and then converting the system into a cationic triphasic W/O/W microemulsion. The developed samples were characterized in terms of droplet size, polydispersity, zeta potential, pH and osmolality. The physical long-term stability was analyzed storing samples at accelerated conditions (40 ± 2 °C and 75 ± 5 % RH) for 6 months in a constant climate chamber, following ICH guidelines Q1A (R2). In order to verify the potential retention on the nasal mucosa, the two triphasic systems were analyzed in terms of mucoadhesive properties, measuring the in vitro interaction with mucin over time. Furthermore, fluorescein sodium salt was selected as a model hydrophilic drug to be encapsulated into the inner core of the two triphasic W/O/W microemulsions, and its release was analyzed compared to the free probe solution. The cytocompatibility of the two platforms was assessed on two cell lines, human fibroblasts HFF1 and Calu-3 cell lines, chosen as pre-clinical models for nasal and bronchial/tracheal airway epithelium.

Visualization of nasal powder distribution using biomimetic human nasal cavity model

Nasal drug delivery efficiency is highly dependent on the position in which the drug is deposited in the nasal cavity. However, no reliable method is currently available to assess its impact on delivery performance. In this study, a biomimetic nasal model based on three-dimensional (3D) reconstruction and three-dimensional printing (3DP) technology was developed for visualizing the deposition of drug powders in the nasal cavity. The results showed significant differences in cavity area and volume and powder distribution in the anterior part of the biomimetic nasal model of Chinese males and females. The nasal cavity model was modified with dimethicone and validated to be suitable for the deposition test. The experimental device produced the most satisfactory results with five spray times. Furthermore, particle sizes and spray angles were found to significantly affect the experimental device's performance and alter drug distribution, respectively. Additionally, mometasone furoate (MF) nasal spray (NS) distribution patterns were investigated in a goat nasal cavity model and three male goat noses, confirming the in vitro and in vivo correlation. In conclusion, the developed human nasal structure biomimetic device has the potential to be a valuable tool for assessing nasal drug delivery system deposition and distribution.

Preparation of Tamsulosin Hydrochloride-Loaded Mucoadhesive In Situ Gelling Polymeric Formulation for Nasal Delivery in Geriatrics

This study aimed to prepare tamsulosin hydrochloride (HCl)-loaded in situ gelling formulation by using hydroxypropyl methylcellulose (HPMC), gellan gum, poloxamer 188, and benzalkonium chloride. Physicochemical evaluation of formulations included determination of pH, viscosity, gelation time, gel strength, drug content, and sterility. In silico study was performed to analyze interactions between polymers, drug, and mucin glycoprotein. In vitro degradation time, drug release, ex vivo mucoadhesion time, permeation, in vivo pharmacokinetics, and stability studies were performed to assess the formulation. Formulations were transparent and displayed acceptable physicochemical attributes. Tamsulosin HCl and polymers interacted via non-covalent interactions. HPMC formed hydrogen bonds, hydrophobic and van der Waals interactions with mucin protein while the drug formed hydrogen bonds only. Gel formulation degraded in simulated nasal fluid within 24 h. In situ gelling formulation showed 83.8 ± 1.7% drug release and remained adhered to the mucosa for 24.5 ± 1 h. A higher (~ 1.85 times) drug permeation was recorded through mucosa within 6 h by in situ gelling formulation when compared to control counterparts (aqueous solution of drug and in situ gelling formulation without poloxamer 188). Nasal administration of tamsulosin HCl by using in situ gelling formulation led to a ~ 3.3 and ~ 3.5 times, respectively, higher Cmax (maximum plasma concentration) and AUCtotal (total area under the curve) than the orally administered aqueous solution. Relative bioavailability of drug delivered by nasal in situ gelling formulation was 3.5 times the oral counterpart. These results indicated that the prepared in situ gelling formulation can act as a promising candidate for systemic administration of tamsulosin HCl.

Nasal-PAMPA: A novel non-cell-based high throughput screening assay for prediction of nasal drug permeability

In nasal drug product development, screening studies are vital to select promising compounds or formulations. The Parallel Artificial Membrane Permeability Assay (PAMPA), a high throughput screening tool, has been applied to evaluate drug permeability across several barriers such as the skin or blood-brain barrier. Herein, a new nasal-PAMPA model was optimized to predict nasal permeability, using a biorelevant donor medium containing mucin. The apparent permeability (Papp) of 15 reference compounds was assessed in six different experimental conditions, and the most discriminating and predictive model was applied to a test drug (piroxicam) and mucoadhesive powder formulations loading the same drug. The model with 0.5% (w/v) mucin in the donor compartment and 2% (w/v) phosphatidylcholine in the lipid membrane accurately distinguished high and low permeable compounds. Additionally, it exhibited the highest correlation with permeation across human nasal epithelial cells, RPMI 2650 (R2 = 0.93). When applied to powder formulations, this model was sensitive to the presence of mucoadhesive excipients and the drug solid state. Overall, the nasal-PAMPA model was more rapid than cell-based assays, without requiring specialized training or equipment, showing to be a promising in vitro tool that can be applied in drug and formulation screening for nasal delivery.

Engineered dry powders for the nose-to-brain delivery of transforming growth factor-beta

Nose-to-brain delivery is increasing in popularity as an alternative to other invasive delivery routes. However, targeting the drugs and bypassing the central nervous system are challenging. We aim to develop dry powders composed of nanoparticles-in-microparticles for high efficiency of nose-to-brain delivery. The size of microparticles (between 250 and 350 µm), is desired for reaching the olfactory area, located below the nose-to-brain barrier. Moreover, nanoparticles with a diameter between 150 and 200 nm are desired for traveling through the nose-to-brain barrier. The materials of PLGA or lecithin were used in this study for nanoencapsulation. Both types of capsules showed no toxicology on nasal (RPMI 2650) cells and a similar permeability coefficient (P_app) of Flu-Na, which was about 3.69 ± 0.47 × 10^-6 and 3.88 ± 0.43 × 10^-6 cm/s for TGF-β-Lecithin and PLGA, respectively. The main difference was related to the location of deposition; the TGF-β-PLGA showed a higher drug deposition in the nasopharynx (49.89 ± 25.90 %), but the TGF-β-Lecithin formulation mostly placed in the nostril (41.71 ± 13.35 %).

Establishing quantitative relationships between changes in nasal spray in vitro metrics and drug delivery to the posterior nasal region

Nasal sprays are typically characterized using in vitro spray metrics such as spray cone angle and droplet size distribution. It is currently not clear how these in vitro metrics correlate with regional nasal deposition, and these relationships could help explain the impact of product differences. In this study, the effects of changes in spray cone angle, spray velocity, spray ovality and droplet size distribution on regional nasal deposition were analyzed using a validated computational fluid dynamics model in recently developed adult characteristic nasal airway anatomies. The impact of the spray on the surrounding air phase was included. Results indicated that changes in spray cone angle largely influenced the nasal posterior deposition (PD) of the drug. Changes in the plume ovality and characteristic droplet size moderately influenced PD, but the results were dependent on the insertion conditions and nasal geometry. Changes in spray velocity and uniformity constant of the droplet size distribution had only minimal influence on PD. The rank order of metrics having the greatest to least impact on PD was cone angle ≫ plume ovality ≫ characteristic droplet size ≫ velocity ≫ size distribution uniformity constant. Overall, results from this study established quantitative relationships for predicting expected changes in PD.

In vitro interactions of aerosol formulations with human nasal epithelium using real-time monitoring of drug transport in a nasal mucosa-on-a-chip

The current organ-on-chip platforms used for studying respiratory drug delivery are limited to the administration of drug solutions and suspensions, lacking the in vivo aerosol drug administration and aerosol interaction with the respiratory tract barrier. Moreover, they mostly rely on conventional assays that require sample collection and 'off the chip' analyses, which can be labor-intensive and costly. In this study, a human nasal epithelial mucosa (NEM)-on-a-chip is developed that enables the deposition of aerosolized nasal formulations while emulating realistic shear stresses (0.23 and 0.78 Pa), exerted to the inferior and middle turbinate of the human nasal cavity. Under these different dynamic conditions in the donor channel of the NEM-on-a-chip, the deposited dose of aerosols and particle size distributions varied. In addition, the increase in the shear stress to 0.78 Pa adversely affected the cells' viability, reflected by a 36.9 ± 5.4% reduction in the transepithelial electrical resistance. The epithelial transport profiles of aerosolized ibuprofen formulations under 0.23 Pa shear stress were successfully monitored in real-time by an electrochemical sensor embedded in the acceptor channel, where the NEM-on-a-chip was able to monitor the effect of permeation enhancer in the test formulation on the rate of drug transport. The novel NEM-on-a-chip can potentially be a promising physiologically relevant tool for reliable nasal aerosol testing in vitro.

Validation and Sensitivity analysis for a nasal spray deposition computational model

Validating numerical models against experimental models of nasal spray deposition is challenging since many aspects must be considered. That being said, it is a critical step in the product development process of nasal spray devices. This work presents the validation process of a nasal deposition model, which demonstrates a high degree of consistency of the numerical model with experimental data when the nasal cavity is segmented into two regions but not into three. Furthermore, by modelling the flow as stationary, the computational cost is drastically reduced while maintaining quality of particle deposition results. Thanks to this reduction, a sensitivity analysis of the numerical model could be performed, consisting of 96 simulations. The objective was to quantify the impact of four inputs: the spray half cone angle, mean spray exit velocity, breakup length from the nozzle exit and the diameter of the nozzle spray device, on the three quantities of interest: the percentage of the accumulated number of particles deposited on the anterior, middle and posterior sections of the nasal cavity. The results of the sensitivity analysis demonstrated that the deposition on anterior and middle sections are sensitive to injection angle and breakup length, and the deposition on posterior section is only, but highly, sensitive to the injection velocity.

Mucoadhesive meloxicam-loaded nanoemulsions: Development, characterization and nasal applicability studies

Intranasally administered non-steroidal anti-inflammatory drugs (NSAIDs) offer an innovative opportunity in the field of pain management. Combination of the nasal physiological advantages such as the rich vascularization and large absorption area along with novel nanomedical formulations can fulfill all the necessary criteria of an advanced drug delivery system. Nanoemulsions represent a versatile formulation approach suitable for nasal drug delivery by increasing the absorption and the bioavailability of many drugs for systemic and nose-to-brain delivery due to their stability, small droplet size and optimal solubilization properties. In this study we aimed to develop meloxicam (MX)-loaded mucoadhesive nanoemulsions and to investigate the nasal applicability of the optimized formulations. Our results indicated the optimized nanoemulsion formulation (MX-NE3) had a droplet size of 158.5 nm in monodisperse droplet size distribution (polydispersity index of 0.211). The surface charge was -11.2 mV, which helped with the colloidal stability upon dilution at simulated nasal conditions and storage. The high encapsulation efficiency (79.2%) mediated a 15-fold drug release and a 3-fold permeability increase at nasal conditions compared to the initial MX. Proper wetting properties associated with high mucoadhesion prosper the increased residence time on the surface of the nasal mucosa. No cytotoxic effect of the formulations was observed on NIH/3T3 mouse embryonic fibroblast cell lines, which supports the safe nasal applicability.

The effect of ingredients commonly used in nasal and inhaled solutions on the secretion of mucus in vitro

Hypersecretion of mucus is associated with impaired mucociliary clearance that can influence the retention of active pharmaceutical ingredients in the airway but is also linked with recurrent airway disease. Therefore, the effect on mucin secretion of a range of ingredients used in solutions delivered to the nose and lung was studied. Mucin secretion from explants of ovine epithelium was quantified using an enzyme-linked lectin assay (ELLA) or sandwich ELLA depending on the compatibility of the ingredients with the assay. Benzalkonium chloride (0.015% w/w), Methocel™ E50 premium LV (1.0% w/w), propylene glycol (1.5% w/w), potassium sorbate + propylene glycol (0.3% w/w + 1.5% w/w) and polysorbate 80 (0.025% w/w), used at common working concentrations, all increased the secretion of mucin from the explants (P < 0.05). Ethylenediamine tetraacetic acid-disodium salt (EDTA) (0.015% w/w), Avicel® RC591 (1.5% w/w), fluticasone furoate (0.0004% w/w, concentration in solution) and dimethyl sulfoxide (DMSO) (0.2% w/w) did not affect mucin secretion. Compounds increasing mucin secretion could alter the rate of mucociliary clearance and the mucus could provide a barrier to drug absorption. This could predispose patients to disease and affect the activity of delivered drugs, decreasing or increasing their clinical efficacy.

A comparison of three mucus-secreting airway cell lines (Calu-3, SPOC1 and UNCN3T) for use as biopharmaceutical models of the nose and lung

The aim of this work was to compare three existing mucus-secreting airway cell lines for use as models of the airways to study drug transport in the presence of mucus. Each cell line secreted mature, glycosylated mucins, evidenced by the enzyme-linked lectin assay. The secretagogue, adenylyl-imidodiphosphate, increased mucin secretion in SPOC1 (3.5-fold) and UNCN3T (1.5-fold) cells but not in Calu-3 cells. In a novel mucus-depleted (MD) model the amount of mucus in the non-depleted wells was 3-, 8- and 4-fold higher than in the mucus-depleted wells of the Calu-3, SPOC1 and UNCN3T cells respectively. The permeability of 'high mucus' cells to testosterone was significantly less in SPOC1 and UNCN3T cells (P < 0.05) but not Calu-3 cells. Mucin secretion and cytokine release were investigated as indicators of drug irritancy in the SPOC1 and UNCN3T cell lines. A number of inhaled drugs significantly increased mucin secretion at high concentrations and the release of IL-6 and IL-8 from SPOC1 or UNCN3T cells (P < 0.05). SPOC1 and UNCN3T cell lines are better able to model the effect of mucus on drug absorption than the Calu-3 cell line and are proposed for use in assessing drug-mucus interactions in inhaled drug and formulation development.

Mucoadhesive and mucus-penetrating interpolyelectrolyte complexes for nose-to-brain drug delivery

Nasal administration offers a possibility of delivering drugs to the brain. In the present work, nasal drug delivery systems were designed based on cationic Eudragit® EPO (EPO) and anionic Eudragit® L100-55 (L100-55) methacrylate copolymers. Two types of nanocarriers were prepared using interpolyelectrolyte complexation between these polymers. The first type of nanoparticles was prepared by forming interpolyelectrolyte complexes between unmodified EPO and L100-55. The second type of nanoparticles was formed through the complexation between PEGylated L100-55 and EPO. For this purpose, PEGylated L100-55 was synthesized by chemical conjugation of L100-55 with O-(2-aminoethyl)polyethylene glycol. The mucoadhesive properties of these nanoparticles were evaluated ex vivo using sheep nasal mucosa. Nanoparticles based on EPO and L100-55 exhibited mucoadhesive properties towards nasal mucosa, whereas PEGylated nanoparticles were non-mucoadhesive hence displayed mucus-penetrating properties. Both types of nanoparticles were used to formulate haloperidol and their ability to deliver the drug to the brain was evaluated in rats in vivo.

Leucine enhances the dispersibility of trehalose-containing spray-dried powders on exposure to a high-humidity environment

This study investigates the ability of various shell-forming excipients to preserve the dispersibility of dry powder dosage forms, e.g., nasally administered vaccines, upon exposure to a high-humidity environment. Trehalose combinations using leucine, pullulan, or trileucine were selected as the candidate excipient systems, and the powder dispersibility of these systems was compared with that of pure trehalose particles. Scaled-up monodisperse spray drying was used to produce sufficient quantities of uniform-sized particles for powder dispersibility analysis. Particle size, crystallinity, and morphology of the powders before and after exposure to moisture were characterized by an aerodynamic particle sizer, Raman spectroscopy, and scanning electron microscopy, respectively. Three two-component particle systems composed of trehalose/trileucine (97/3 w/w), trehalose/pullulan (70/30 w/w), and trehalose/leucine (70/30 w/w) were first formulated and their dispersibility, characterized as the emitted dose from dry powder inhalers, was then compared with that of trehalose particles. The formulation containing 30% leucine maintained the highest emitted dose (90.3 ± 10%) at a 60 L/min flow rate after 60 min exposure to 90% RH and 25 °C, showing its superior protection against exposure to humidity compared with the other systems. Further investigations under more challenging conditions at a 15 L/min flow rate on the trehalose/leucine system with various compositions (70/30, 80/20, 90/10 w/w) showed that a higher leucine concentration generally provided better protection against moisture and maintained higher powder dispersibility, probably due to higher surface coverage of crystalline leucine and a thicker leucine shell around the particle. The study concludes that leucine may be considered an appropriate shell-forming excipient in the development of dry powder formulations in order to protect the dosage forms against humidity during administration.

Evaluation of Systemic and Mucosal Immune Responses Induced by a Nasal Powder Delivery System in Conjunction with an OVA Antigen in Cynomolgus Monkeys

An immune response for a nasal ovalbumin (OVA) powder formulation with an applied nasal delivery platform technology, consisting of a powdery nasal carrier and a device, was evaluated in monkeys with similar upper respiratory tracts and immune systems to those of humans, in order to assess the applicability to a vaccine antigen. Nasal distribution and retention studies using a 3D nasal cavity model and manganese-enhanced MRI were conducted by administering nasal dye and manganese powder formulations with the applied technology. Systemic and mucosal immune responses for the nasal OVA powder formulation were evaluated by determining serum IgG and nasal wash IgA antibody titers. The nasal dye and manganese powder formulations showed wider distribution and longer retention time than did a nasal liquid formulation. The nasal OVA powder formulation also showed comparable and higher antigen-specific IgG antibody titer to an injection and nasal liquid formulation, respectively. Furthermore, antigen-specific IgA antibody response was detected only for the nasal OVA powder formulation. The present study suggests that the technology, originally designed for drug absorption, is promising for nasal vaccines, enabling both a mucosal immunity response as the first line of defense and systemic immunity response as a second line of defense against infection.

Nanomedicine strategies to target coronavirus

With the severe acute respiratory syndrome coronavirus (SARS-CoV) in 2002, the middle east respiratory syndrome CoV (MERS-CoV) in 2012 and the recently discovered SARS-CoV-2 in December 2019, the 21st first century has so far faced the outbreak of three major coronaviruses (CoVs). In particular, SARS-CoV-2 spread rapidly over the globe affecting nearly 25.000.000 people up to date. Recent evidences pointing towards mutations within the viral spike proteins of SARS-CoV-2 that are considered the cause for this rapid spread and currently around 300 clinical trials are running to find a treatment for SARS-CoV-2 infections. Nanomedicine, the application of nanocarriers to deliver drugs specifically to a target sites, has been applied for different diseases, such as cancer but also in viral infections. Nanocarriers can be designed to encapsulate vaccines and deliver them towards antigen presenting cells or function as antigen-presenting carriers themselves. Furthermore, drugs can be encapsulated into such carriers to directly target them to infected cells. In particular, virus-mimicking nanoparticles (NPs) such as self-assembled viral proteins, virus-like particles or liposomes, are able to replicate the infection mechanism and can not only be used as delivery system but also to study viral infections and related mechanisms. This review will provide a detailed description of the composition and replication strategy of CoVs, an overview of the therapeutics currently evaluated in clinical trials against SARS-CoV-2 and will discuss the potential of NP-based vaccines, targeted delivery of therapeutics using nanocarriers as well as using NPs to further investigate underlying biological processes in greater detail.

The uses of resveratrol for neurological diseases treatment and insights for nanotechnology based-drug delivery systems

Neurological disorders have been growing in recent years and are highly prevalent globally. Resveratrol (RES) is a natural product from plant sources such as grape skins. This compound has shown biological activity in many diseases, in particular, those that act on the central nervous system. The mechanism of action and the key points in neurological disorders were described and show the targeted mechanism of action. Due to the insolubility of this compound; the use of nanotechnology-based systems has been proposed for the incorporation of RES and RES-loaded nanocarriers have been designed for intranasal administration, oral or parenteral routes to deliver it to the brain. In general, these nanosystems have shown to be effective in many studies, pharmacological and pharmacokinetic assays, as well as some cell studies. The outcomes show that RES has been reported in human clinical trials for some neurological diseases, although no studies were performed in humans using nanocarriers, animal and/or cellular models have been reported to show good results regarding therapeutics on neurological diseases. Thus, the use of this nutraceutical has shown true for neurological diseases and its loading into nanocarriers displaying good results on the stability, delivery and targeting to the brain.

A gellan gum derivative as in-situ gelling cationic polymer for nasal drug delivery

The aim of the present study was the development of a novel gellan gum derivative exhibiting mucoadhesive properties for nasal application. Accomplishing this, amino groups have been introduced to the polymeric backbone. The resulting synthesis products were characterized in terms of the amount of attached amino groups, regarding hydration, zeta potential and gel characteristics. Mucoadhesiveness was assessed studying rheological synergism, by rotating cylinder and regarding tensile studies. Next to erythrocyte-/cytotoxicity evaluation, the impact on ciliary beat frequency of nasal epithelial cells was investigated. Results revealed coupling rates up to 1259.50 ± 75.98 μmol/g polymer as well as accelerated hydration of the derivatives. Comparing aminated with unmodified gellan, enhanced mucoadhesion was verified by a 32-fold increase in viscosity of polymer/mucus mixtures and by a 14-fold extended mucosal adhesion time. Tensile studies demonstrated a 9-fold higher total work of adhesion and a 3.75-fold elevated maximum detachment force. Cellular membrane was not seriously impaired. CBF studies proved a reversible inhibition due to the application of the novel derivative. According to the outlined findings, aminated gellan gum can be considered as a promising excipient for nasal dosage forms improving drug bioavailability by superior adhesive features.

In vitro and in vivo evaluation of levodopa-loaded nanoparticles for nose to brain delivery

Parkinson's disease (PD) is a neurodegenerative disease which is characterized by the loss of dopaminergic neurons in the brain. Levodopa is the drug of choice in the treatment of PD but it exhibits low oral bioavailability (30%) and very low brain uptake due to its extensive metabolism by aromatic amino acid decarboxylase in the peripheral circulation. Moreover, levodopa has psychic, gastrointestinal, and cardiovascular side effects, and most importantly, short and frequent stimulation of dopamine receptors lead to undesirable conditions such as dyskinesia over time. The challenges are to increase the therapeutic efficiency, the bioavailability and decreasing the unfavourable side effects of levodopa. Biocompatible nano-sized drug carriers could address these challenges at molecular level. For this purpose, levodopa-loaded Poly (lactide-co-glycolide) acid nanoparticles were prepared by double emulsion-solvent evaporation method for nose to brain drug delivery. Parameters such as homogenization speed, and external and internal phase content were modified to reach the highest loading efficiency. F1-1 coded formulation showed prolonged release up to 9 h. Carbodiimide method was used for surface modification studies of nanoparticles. The efficacy of the selected nanoparticle formulation has been demonstrated by in vivo experiments in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine induced PD model in mice.

Improving the hypoglycemic effect of insulin via the nasal administration of deep eutectic solvents

This study aimed to develop biocompatible deep eutectic solvents (DESs) as carriers for improving the nasal delivery of insulin. The DES was prepared from malic acid and choline chloride broadly used in foods, drugs, or cosmetics as biocompatible additives. The DES of choline chloride and malic acid (CM-DES) demonstrated lower melting point (-59.1 °C) and higher viscosity (120,000 cP) compared with hydrogels based on sodium carboxyl methyl cellulose (CMC-Na). The conformational structure of insulin does not change in CM-DES as characterized by circular dichroism. The in vitro results showed that CM-DES dissociated gradually but did not disintegrate immediately upon contact with water. CM-DES was able to improve the hypoglycemic effect of insulin significantly at different doses compared with hydrogels or solutions of insulin, which could be ascribed to facilitated penetration of insulin across the nasal epithelia by CM-DES. The hypoglycemic effect of CM-DES loading insulin at a dose of 25 IU/kg was similar to that of subcutaneous insulin at 1 IU/kg. In addition, no evident toxicity to nasal epithelia was observed after nasal administration to rats for seven consecutive days. In conclusion, CM-DES showed promising potential in enhancing the hypoglycemic effect of insulin via the nasal route.

Acrylated Eudragit® E PO as a novel polymeric excipient with enhanced mucoadhesive properties for application in nasal drug delivery

Eudragit® E PO (EPO) is a terpolymer based on N,N-dimethylaminoethyl methacrylate with methylmethacrylate and butylmethacrylate, produced by Evonik Industries AG as a pharmaceutical excipient. In this work, EPO was chemically modified through reaction with acryloyl chloride. The successful modification of EPO was confirmed by FTIR, NMR-spectroscopy, elemental and thermal analysis. The degree of acrylation was determined by permanganatometric titration. The slug mucosal irritation test was used to demonstrate non-irritant nature of EPO and its acrylated derivatives (AEPO). The mucoadhesive properties of EPO and AEPO were evaluated using freshly excised sheep nasal mucosa and it was demonstrated that acrylated polymers facilitated greater retention of sodium fluorescein on mucosal surfaces compared to solution mixture of this dye solution with EPO as well as free dye.

Updates on thermosensitive hydrogel for nasal, ocular and cutaneous delivery

Thermosensitive hydrogels are in situ gelling systems composed of hydrophilic homopolymers or block copolymers which remain as solutions at room temperature and form gels after administration into the body. Its application in advanced drug delivery has gained significant attention in recent years. The tunable characteristics of thermosensitive hydrogels make them versatile and capable of incorporating both hydrophilic and lipophilic compounds and macromolecules. The drug molecules can be included as free molecules or preformulated into nano- or micro-particles or liposomes. Although there were several reviews on the materials of thermosensitive hydrogels, the compatibility between the drug and thermosensitive material as well as its in vitro release mechanisms and in vivo performance have barely been investigated. The current review is proposed aiming to not only provide an update on the recent development in thermosensitive hydrogel formulations for nasal, ocular and cutaneous deliveries, but also identify the relationship between the drug characteristics and the loading strategies, and their impacts on the release mechanisms and the in vivo performance. Our current update for the first time highlights the essential features for successful development of in situ thermosensitive hydrogels to facilitate nasal, ocular or cutaneous drug deliveries.

Orally inhaled migraine therapy: Where are we now?

Migraine is a debilitating disease that affects 9% of men and 19% of women worldwide with high socio-economic and personal impact. Surveys indicate that migraineurs are among the most dissatisfied with available therapeutic options, predominantly given via oral or injectable routes, citing side effects as the primary complaint. Orally inhaled therapies have the potential to offer faster onset of action with fewer side effects compared to existing therapies, yet development has stalled. Despite emerging therapies such as calcitonin gene-related peptide antagonists, there are still good opportunities for repositioning migraine drugs via the inhaled route.

Freeze-Dried K-Carrageenan/Chitosan Polyelectrolyte Complex-Based Insert: A Novel Intranasal Delivery System for Sumatriptan Succinate

Intranasal route, ensuring suitable bioavailability of medicines under circumvention of the gastrointestinal degradation and hepatic first-pass elimination, has been a popular choice for drug delivery. Among nasal dosage forms, mucoadhesive solid inserts have been shown to resist mucociliary clearance and provide a prolonged nasal residence time. Hence, the purpose of this study was the preparation and characterization of nasal inserts composing of polyelectrolyte complexes (PECs) based on k-carrageenan (k-CA) and chitosan (CS) to boost therapeutic efficacy of sumatriptan succinate in the treatment of migraine headache. k-CA/CS PECs were developed in different molar ratios, subjected to lyophilization in small inserts in the presence of sumatriptan succinate, and finally investigated for water uptake ability, mucoadhesive potential, and drug release profile. The formation of PEC between the two polymers was affirmed by Fourier transform infrared spectroscopy (FTIR). Based on the results, it was revealed that the polyanion/polycation molar ratio plays a critical role in modulating the characteristics of the inserts, and among all the formulations, the one comprising k-CA/CS PEC with molar ratio of (4:1), (k-CA/CS _(4:1)), demonstrated the highest water uptake ability and mucoadhesive potential and provided a more controlled release of sumatriptan succinate. This study illustrates the potential of the lyophilized inserts based on the k-CA/CS PECs, especially k-CA/CS _(4:1), for efficient delivery of sumatriptan succinate via the nasal route of administration and suggests a potential therapeutic approach for the termination of migraine attacks.

Opportunity and challenges of nasal powders: Drug formulation and delivery

In the field of nasal drug delivery, among the preparations defined by the European Pharmacopoeia, nasal powders facilitate the formulation of poorly water-soluble active compounds. They often display a simple composition in excipients (if any), allow for the administration of larger drug doses and enhance drug diffusion and absorption across the mucosa, improving bioavailability compared to nasal liquids. Despite the positive features, however, nasal products in this form still struggle to enter the market: the few available on the market are Onzetra Xsail® (sumatriptan) for migraine relief and, for the treatment of rhinitis, Rhinocort® Turbuhaler® (budesonide), Teijin Rhinocort® (beclomethasone dipropionate) and Erizas® (dexamethasone cipecilate). Hence, this review tries to understand why nasal powder formulations are still less common than liquid ones by analyzing whether this depends on the lack of (i) real evidence of superior therapeutic benefit of powders, (ii) therapeutic and/or commercial interest, (iii) efficient manufacturing methods or (iv) availability of suitable and affordable delivery devices. To this purpose, the reader's attention will be guided through nasal powder formulation strategies and manufacturing techniques, eventually giving up-to-date evidences of therapeutic efficacy in vivo. Advancements in the technology of insufflation devices will also be provided as nasal drug products are typical drug-device combinations.

Intranasal administration of carbamazepine-loaded carboxymethyl chitosan nanoparticles for drug delivery to the brain

Epilepsy is considered as a common and diverse set of chronic neurological disorders and its symptoms can be controlled by antiepileptic drugs (AEDs). The presence of p-glycoprotein and multi-drug resistance transporters in the blood-brain barrier could prevent the entry of AEDs into the brain, causing drug resistant epilepsy. To overcome this problem, we propose using carboxymethyl chitosan nanoparticles as a carrier to deliver carbamazepine (CBZ) intra-nasally with the purpose to bypass the blood-brain barrier thus to enhance the brain drug concentration and the treatment efficacy. Results so far indicate that the developed CBZ-NPs have small particle size (218.76 ± 2.41 nm) with high drug loading (around 35%) and high entrapment efficiency (around 80%). The in vitro release profiles of CBZ from the NPs are in accordance with the Korsmeyer-peppas model. The in vivo results show that both encapsulation of CBZ in nanoparticles and the nasal route determined the enhancement of the drug bioavailability and brain targeting characteristics.

Resveratrol solid lipid microparticles as dry powder formulation for nasal delivery, characterization and in vitro deposition study

This study focuses on development and in vitro characterisation of a nasal delivery system based on uncoated or chitosan-coated solid lipid microparticles (SLMs) containing resveratrol, a natural anti-inflammatory molecule, as an effective alternative to the conventional steroidal drugs. The physico-chemical characteristics of the SLMs loaded with resveratrol were evaluated in terms of morphology, size, thermal behaviour and moisture sorption. The SLMs appeared as aggregates larger than 20 μm. In vitro nasal deposition was evaluated using a USP specification Apparatus E 7-stage cascade impactor equipped with a standard or a modified nasal deposition apparatus. More than 95% of resveratrol was recovered onto the nasal deposition chamber and stage 1 of impactor, suggesting that the SLMs mostly deposited in the nasal cavity. Additionally, the SLMs were not toxic on RPMI 2650 nasal cell line up to a concentration of approximately 40 μM of resveratrol.

Nasal drug delivery: Design of a novel mucoadhesive and in situ gelling polymer

The aim of the present study was to establish a novel polymeric excipient for liquid nasal dosage forms exhibiting viscosity increasing properties, improved mucoadhesion and stability towards oxidation in solution. In order to achieve this goal, 2-mercaptonicotinic acid was first coupled to l-cysteine by disulfide exchange reaction and after purification directly attached to the polymeric backbone of xanthan gum by carbodiimide mediated amide bond formation. The resulting conjugate was characterized with respect to the amount of coupled ligand, the in situ gelling behavior, mucoadhesive properties and stability towards oxidation. Furthermore, the influence of preactivated polymers on ciliary beat frequency (CBF) of porcine nasal epithelial cells was investigated. Results showed, that 252.52±20.54μmol of the ligand was attached per gram polymer. No free thiol groups could be detected on the polymeric backbone indicating entire preactivation. Rheological investigations of polymer mucus mixtures revealed a 1.7-fold and 2.5-fold enhanced mucoadhesion of entirely preactivated xanthan (Xan-Cys-MNA) compared to thiolated xanthan (Xan-Cys) and unmodified xanthan (Xan). Tensile force evaluation reported a 2.87 and 5.11-fold higher total work of adhesion (TWA) as well as a 1.63 and 2.41-fold higher maximum detachement force of Xan-Cys-MNA compared to Xan-Cys and Xan. In the presence of H₂O₂ as an oxidizing agent Xan-Cys-MNA showed unlike Xan-Cys no increase in viscosity, indicating high stability towards oxidation. Addition of CaCl₂ to Xan-Cys-MNA solutions caused a decrease in viscosity at nevertheless higher total viscosity. Results from CBF studies proved nasal safety for the novel conjugate. According to these results, entirely preactivated thiolated xanthan gum seems to be a promising excipient for nasal dosage forms in order to improve drug bioavailability.

Intranasal surfactant protein D as neuroprotective rescue in a neonatal rat model of periventricular leukomalacia

BACKGROUND

Periventricular leukomalacia (PVL) is the leading cause of neurocognitive deficits in children with prematurity. We previously hypothesized that surfactant protein D (SPD) with its ability to bind toll-like receptors may have a possible ameliorating effect in PVL.

METHODS

Three groups were defined as: LPS-administered and postnatal intranasal saline administered group, LPS-administered and postnatal intranasal SPD-treated group, and control group. Twenty-eight offspring rats were reared with their dams until their sacrifice for histological evaluation on day 7.

RESULTS

A significant loss of brain weight occurred in the LPS group compared with controls. The postnatal intranasal SPD treatment significantly reduced the number of TUNEL-positive cells in the periventricular white matter as compared with the LPS-treated group. Compared with the control group, LPS injection in the rat brain significantly reduced the MBP-positive staining. Postnatal SPD treatment greatly prevented LPS-stimulated loss of MBP staining.

CONCLUSIONS

Present study demonstrated a neuroprotective effect of SPD in a rat model of PVL. Our results offer future implications towards increasing our understanding about multifactorial mechanisms underlying periventricular leukomalacia and developing plausible therapeutic strategies in order to prevent neurocognitive deficits in preterm infants.

Smart Polymers in Nasal Drug Delivery

Nasal drug delivery has now been recognized as a promising route for drug delivery due to its capability of transporting a drug to systemic circulation and central nervous system. Though nasal mucosa offers improved bioavailability and quick onset of action of the drug, main disadvantage associated with nasal drug delivery is mucocilliary clearance due to which drug particles get cleared from the nose before complete absorption through nasal mucosa. Therefore, mucoadhesive polymeric approach can be successfully used to enhance the retention of the drug on nasal mucosal surface. Here, some of the aspects of the stimuli responsive polymers have been discussed which possess liquid state at the room temperature and in response to nasal temperature, pH and ions present in mucous, can undergo in situ gelation in nasal cavity. In this review, several temperature responsive, pH responsive and ion responsive polymers used in nasal delivery, their gelling mechanisms have been discussed. Smart polymers not only able to enhance the retention of the drug in nasal cavity but also provide controlled release, ease of administration, enhanced permeation of the drug and protection of the drug from mucosal enzymes. Thus smart polymeric approach can be effectively used for nasal delivery of peptide drugs, central nervous system dugs and hormones.

Optimization of combinational intranasal drug delivery system for the management of migraine by using statistical design

Migraine is a chronic disorder characterized by significant headache and various associated symptoms which worsen with exertion. Zolmitriptan approved for use in the acute treatment of migraine and related vascular headaches but are limited by high pain recurrence due to rapid drug elimination. Combinationalformulationof triptans and a nonsteroidal anti-inflammatory drug may provide a quicker and longer duration of relief from the subsequent pain during the attack. In this study, we formulate a Zolmitriptan (ZT) & ketorolac tromethamine (KT) loaded thermo reversible in-situ mucoadhesive intranasal gel (TMISG) formulation which gels at the nasal mucosal temperature and contains a bioadhesive polymer (Xyloglucan) that lengthens the residence time will enhance the bioavailability of the combinational drugs. This study uses Box-Behnken design for the first time to develop, optimize the TMISG and assess factors affecting the critical quality attributes. Histopathological study of the nasal mucosa suggested that the formulation was safe for nasal administration. The statistical difference in absolute bioavailability between oral and intranasal route suggested that intranasal route had almost 21% increases in bioavailability for ZT and for KT there was 16% increase over oral formulations. Optimized formulation would help mitigate migraine associated symptoms much better over the currently available formulations.