Advancing CEA quantification: Designing a sensitive electrochemical immunosenor using MWCNT/Ni(OH)2 nanocomposite

An ultra-sensitive immunosensor was designed for the accurate determination of Carcinoembryonic Antigen (CEA). To enhance the performance of immunosensor, an MWCNT/Ni(OH)2 nanocomposite was utilized as the electrochemical interface and modifier of the electrode surface. The simple preparation procedures for MWCNT/Ni(OH)2 composite were provided. Its characteristics and properties were investigated by HRTEM, FESEM, XRD, and FTIR techniques. Leveraging the unique electrochemical characteristics shown by the MWCNT/Ni(OH)2 nanocomposite and its correlation with CEA, high accuracy in CEA detection was achieved. Experimental findings provide evidence that the proposed immunosensor has the ability to detect CEA in laboratory samples. This research contributes towards achieving precise and rapid CEA detection in cancer diagnosis and prognosis. Across a wide concentration range of CEA, the designed immunosensor demonstrated a linear response from 0.0001 ng/mL to 2 ng/mL, and its limit of detection (LOD) was just 0.076 pg/mL. To evaluate the practical applicability of the electrochemical immunosensor, blood serum samples were examined, revealing the immunosensor's remarkable specificity and longevity. Its high accuracy and stability make it a valuable tool in clinical settings and biomedical research, paving the way for improved cancer management and patient outcomes.

Biomedical Applications of CNT-Based Fibers

Carbon nanotubes (CNTs) have been regarded as emerging materials in various applications. However, the range of biomedical applications is limited due to the aggregation and potential toxicity of powder-type CNTs. To overcome these issues, techniques to assemble them into various macroscopic structures, such as one-dimensional fibers, two-dimensional films, and three-dimensional aerogels, have been developed. Among them, carbon nanotube fiber (CNTF) is a one-dimensional aggregate of CNTs, which can be used to solve the potential toxicity problem of individual CNTs. Furthermore, since it has unique properties due to the one-dimensional nature of CNTs, CNTF has beneficial potential for biomedical applications. This review summarizes the biomedical applications using CNTF, such as the detection of biomolecules or signals for biosensors, strain sensors for wearable healthcare devices, and tissue engineering for regenerating human tissues. In addition, by considering the challenges and perspectives of CNTF for biomedical applications, the feasibility of CNTF in biomedical applications is discussed.

A Review on Carbon Nanotubes Family of Nanomaterials and Their Health Field

The use of carbon nanotubes (CNTs), which are nanometric materials, in pathogen detection, protection of environments, food safety, and in the diagnosis and treatment of diseases, as efficient drug delivery systems, is relevant for the improvement and advancement of pharmacological profiles of many molecules employed in therapeutics and in tissue bioengineering. It has contributed to the advancement of science due to the development of new tools and devices in the field of medicine. CNTs have versatile mechanical, physical, and chemical properties, in addition to their great potential for association with other materials to contribute to applications in different fields of medicine. As, for example, photothermal therapy, due to the ability to convert infrared light into heat, in tissue engineering, due to the mechanical resistance, flexibility, elasticity, and low density, in addition to many other possible applications, and as biomarkers, where the electronic and optics properties enable the transduction of their signals. This review aims to describe the state of the art and the perspectives and challenges of applying CNTs in the medical field. A systematic search was carried out in the indexes Medline, Lilacs, SciELO, and Web of Science using the descriptors "carbon nanotubes", "tissue regeneration", "electrical interface (biosensors and chemical sensors)", "photosensitizers", "photothermal", "drug delivery", "biocompatibility" and "nanotechnology", and "Prodrug design" and appropriately grouped. The literature reviewed showed great applicability, but more studies are needed regarding the biocompatibility of CNTs. The data obtained point to the need for standardized studies on the applications and interactions of these nanostructures with biological systems.

Non-enzymatic glucose detection with screen-printed chemiresistive sensor using green synthesised silver nanoparticle and multi-walled carbon nanotubes-zinc oxide nanofibers

Non-enzymatic screen-printed chemiresistive interdigitated electrodes (SPCIE) were designed and fabricated using a low-cost screen-printing method for detection of the glucose. The interdigitated electrodes (IDE) pattern was printed using conductive graphene ink on the glossy surface of the photo paper. The proposed glossy photo paper-based SPCIE are functionalized with multi-walled carbon nanotubes-zinc oxide (MWCNTs-ZnO) nanofibers to create the chemiresistive matrix. Further, to bind these nanofibers with the graphene electrode surface, we have used the green synthesized silver nanoparticles (AgNPs) with banana flower stem fluid (BFSF) as a binder solution. AgNPs with BFSF form the conductive porous natural binder layer (CPNBL). It does not allow to increase the resistivity of the deposited material on graphene electrodes and also keeps the nanofibers intact with paper-based SPCIE. The synthesized material of MWCNT-ZnO nanofibers and green synthesized AgNPs with BFSF as a binder were characterized by Ultraviolet-visible spectroscopy (UV-vis), scanning electron microscope (SEM), x-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). The amperometric measurements were performed on the proposed SPCIE sensor to detect the glucose sample directly. The innovative paper-based SPCIE glucose sensor exhibits a linear corelation between current measurements and glucose concentration in the range between 45.22μm and 20 mm, with a regression coefficient (R2) of 0.9902 and a lower limit of detection (LoD) of 45.22μm (n= 5). The sensitivity of the developed SPCIE sensor was 2178.57μAmM-1cm-2, and the sensor's response time determined was approximately equal to 18 s. The proposed sensor was also tested for real blood serum sample, and relative standard deviation (RSD) was found equal to 2.95%.

Nanotechnology-Based Strategies in Parasitic Disease Management: From Prevention to Diagnosis and Treatment

Parasitic infections are a major global health issue causing significant mortality and morbidity. Despite substantial advances in the diagnostics and treatment of these diseases, the currently available options fall far short of expectations. From diagnosis and treatment to prevention and control, nanotechnology-based techniques show promise as an alternative approach. Nanoparticles can be designed with specific properties to target parasites and deliver antiparasitic medications and vaccines. Nanoparticles such as liposomes, nanosuspensions, polymer-based nanoparticles, and solid lipid nanoparticles have been shown to overcome limitations such as limited bioavailability, poor cellular permeability, nonspecific distribution, and rapid drug elimination from the body. These nanoparticles also serve as nanobiosensors for the early detection and treatment of these diseases. This review aims to summarize the potential applications of nanoparticles in the prevention, diagnosis, and treatment of parasitic diseases such as leishmaniasis, malaria, and trypanosomiasis. It also discusses the advantages and disadvantages of these applications and their market values and highlights the need for further research in this field.

Device-Physics Realization of ZnO-MWCNT Nanostructure-Based Field-Effect Biosensor for Ultrasensitive Simultaneous Genomic Detection of Foodborne Pathogens

The complex and versatile interactions among the wide variety of the nanostructures and the target analytes have primarily limited the detailed investigation of the transduction mechanism of nanomaterial-assisted electrical signal-based biosensors despite their high sensitivity, low-cost, portability, and ease of deployment. Hence, no common ground is formed detailing the principle of operation, demanding a strong need for systematic examination instead of hit and trial. Therefore, a maiden mechanistic investigation has been carried out in this paper for a field-effect-based biosensor device relying on the energy band diagram and the surface potential profile. To demonstrate the experimental evidence and appreciate the importance of food safety, three hazardous foodborne pathogens (Proteus mirabilis, Escherichia coli, and Clostridium botulinum) have been detected herein. The biosensor device, built on a hydrothermally synthesized zinc oxide and MWCNT (ZnO-MWCNT) composite nanostructure, simultaneously incorporates three fairly specific ss-DNA probes. Furthermore, the unmet challenge of biosensor device variability is addressed through the optimum selection of operating voltage of the device via a unique "voltage-selection-algorithm". We believe that the rigorous experimentation and the insightful device-physics realization demonstrated in this work will pave the way for a future decisive biosensor platform.

Smartphone-powered, ultrasensitive, and selective, portable and stable multi-analyte chemiresistive immunosensing platform with PPY/COOH-MWCNT as bioelectrical transducer: Towards point-of-care TBI diagnosis

Traumatic Brain Injury, one of the significant causes of mortality and morbidity, affects worldwide and continues to be a diagnostic challenge. The most desirable and partially met clinical need is to simultaneously detect the disease-specific-biomarkers in a broad range of readily available body fluids on a single platform with a rapid, low-cost, ultrasensitive and selective device. Towards this, an array of interdigitated microelectrodes was fabricated on commercially existing low-cost single-side copper cladded printed-circuit-board substrate followed by the bioelectrodes preparation through covalent immobilization of brain injury specific biomarkers on carboxylic functionalized multi-walled carbon nanotubes embedded polypyrrole nanocomposite modified interdigitated microelectrodes. Subsequently, the immunological binding events were transduced as the normalized change in bioelectrode resistance with and without the target analyte via current-voltage analysis. As proof of concept, current-voltage responses were primarily recorded using a conventional probe station, and later, a portable handheld-electronic-readout was developed for the point-of-care application. The data compilation and analysis were carried out using the in-house developed android-based mobile app. Notably, the smartphone powered the readout through a PL-2303 serial connector, avoiding integrating power sources with the readout. Further, this technology can be adapted to other point-of-care biosensing applications.

Carbon Nanotube and Its Derived Nanomaterials Based High Performance Biosensing Platform

After the COVID-19 pandemic, the development of an accurate diagnosis and monitoring of diseases became a more important issue. In order to fabricate high-performance and sensitive biosensors, many researchers and scientists have used many kinds of nanomaterials such as metal nanoparticles (NPs), metal oxide NPs, quantum dots (QDs), and carbon nanomaterials including graphene and carbon nanotubes (CNTs). Among them, CNTs have been considered important biosensing channel candidates due to their excellent physical properties such as high electrical conductivity, strong mechanical properties, plasmonic properties, and so on. Thus, in this review, CNT-based biosensing systems are introduced and various sensing approaches such as electrochemical, optical, and electrical methods are reported. Moreover, such biosensing platforms showed excellent sensitivity and high selectivity against not only viruses but also virus DNA structures. So, based on the amazing potential of CNTs-based biosensing systems, healthcare and public health can be significantly improved.

Towards point-of-care diagnosis of Alzheimer's disease: Multi-analyte based portable chemiresistive platform for simultaneous detection of β-amyloid (1-40) and (1-42) in plasma

Label-free simultaneous detection of Alzheimer's disease (AD) specific biomarkers Aβ40 and Aβ42 peptides on a single platform using polypyrrole nanoparticle-based chemiresistive biosensors is reported here. The proposed interdigitated-microelectrode based inexpensive multisensor-platform can concurrently detect Aβ40 and Aβ42 in spiked-plasma in the range of 10-14 - 10-6 g/mL (with LoDs being 5.71 and 9.09 fg/mL, respectively), enabling the estimation of diagnostically significant Aβ42/Aβ40 ratio. A detailed study has been undertaken here to record the individual sensor responses against spiked-plasma samples with varying amounts and proportions of the two target peptides, towards enabling disease-progression monitoring using the Aβ-ratio. As compared to the existing cost-ineffective brain-imaging techniques such as PET and MRI, and the high-risk CSF based invasive AD biomarkers detecting procedures, the proposed approach offers a viable alternative for affordable point-of-care AD diagnostics, with possible usage in performance evaluation of therapeutic drugs. Towards point-of-care applications, the portable readout used in this work was conjugated with an android-based mobile app for data-acquisition and analysis.

Electrochemical biosensors for neglected tropical diseases: A review

A group of infectious and parasitic diseases with prevalence in tropical and subtropical regions of the planet, especially in places with difficult access, internal conflicts, poverty, and low visibility from the government and health agencies are classified as neglected tropical diseases. While some well-intentioned isolated groups are making the difference on a global scale, the number of new cases and deaths is still alarming. The development and employment of low-cost, miniaturized, and easy-to-use devices as biosensors could be the key to fast diagnosis in such areas leading to a better treatment to further eradication of such diseases. Therefore, this review contains useful information regarding the development of such devices in the past ten years (2010-2020). Guided by the updated list from the World Health Organization, the work evaluated the new trends in the biosensor field applied to the early detection of neglected tropical diseases, the efficiencies of the devices compared to the traditional techniques, and the applicability on-site for local distribution. So, we focus on Malaria, Chagas, Leishmaniasis, Dengue, Zika, Chikungunya, Schistosomiasis, Leprosy, Human African trypanosomiasis (sleeping sickness), Lymphatic filariasis, and Rabies. Few papers were found concerning such diseases and there is no available commercial device in the market. The works contain information regarding the development of point-of-care devices, but there are only at proof of concepts stage so far. Details of electrode modification and construction of electrochemical biosensors were summarized in Tables. The demand for the eradication of neglected tropical diseases is increasing. The use of biosensors is pivotal for the cause, but appliable devices are scarce. The information present in this review can be useful for further development of biosensors in the hope of helping the world combat these deadly diseases.

Laboratory Detection of Malaria Antigens: a Strong Tool for Malaria Research, Diagnosis, and Epidemiology

The identification and characterization of proteins produced during human infection with Plasmodium spp. have guided the malaria community in research, diagnosis, epidemiology, and other efforts. Recently developed methods for the detection of these proteins (antigens) in the laboratory have provided new types of data that can inform the evaluation of malaria diagnostics, epidemiological investigations, and overall malaria control strategies. Here, the focus is primarily on antigens that are currently known to be detectable in human specimens and on their impact on the understanding of malaria in human populations. We highlight historical and contemporary laboratory assays for malaria antigen detection, the concept of an antigen profile for a biospecimen, and ways in which binary results for a panel of antigens could be interpreted and utilized for different analyses. Particular emphasis is given to the direct comparison of field-level malaria diagnostics and laboratory antigen detection for the development of an external evaluation scheme. The current limitations of laboratory antigen detection are considered, and the future of this developing field is discussed.

A facile, sensitive and rapid sensing platform based on CoZnO for detection of fipronil; an environmental toxin

A sensitive detection of extremely toxic phenylpyrazole insecticide, 'Fipronil' is presented. Currently, the advancement of approaches for the detection of insecticides at low concentrations with less time is important for environmental safety assurance. Considering this fact, an effort has been made to develop an electrospun CoZnO nanofiber (NF) based label-free electrochemical system for the detection of fipronil. The CoZnO NF were characterized using different techniques including field emission scanning electron microscopy (FE-SEM), Energy Dispersive X-Ray Analysis (EDX), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Raman Spectroscopy. Based on the experimental results, the proposed platform displayed a linear response for fipronil in the attogram/mL range despite the multiple interfering agents. The sensitivity of the device was found to be 3.99 Kῼ (g/ml)^-1 cm^-2. Limit of detection (LOD) and limit of quantification (LOQ) were calculated and found to be 112 ag mL^-1 and 340 ag mL^-1 respectively. Further, this proposed sensor will be implemented in the fields for the rapid and proficient detection of the real samples.

One-step enzyme-free dual electrochemical immunosensor for histidine-rich protein 2 determination

In the present work, we describe a novel one-step enzyme-free dual electrochemical immunosensor for the determination of histidine-rich protein 2 (Ag-PfHRP2), a specific malaria biomarker. A gold electrode (GE) was functionalized with the PfHRP2 antibody (Ab-PfHRP2) using dihexadecyl phosphate (DHP) polymer as an immobilization platform. The Ab-PfHRP2/DHP/GE sensor was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy. The developed immunosensor was employed for indirect Ag-PfHRP2 determination by differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). The linear range was 10-400 ng mL-1 and 10-500 ng mL-1 for EIS and DPV, while the limit of detection was 3.3 ng mL-1 and 2.8 ng mL-1, respectively. The electrochemical immunosensor was successfully applied for Ag-PfHRP2 determination in human serum samples. Its performance was compared with an ELISA test, and good correspondence was achieved. The coefficients of intra- and inter-assay variations were less than 5%. The electrochemical immunosensor is a useful and straightforward tool for in situ malaria biomarker determination.

Recent Advances in Zinc Oxide Nanostructures with Antimicrobial Activities

This article reviews the recent developments in the synthesis, antibacterial activity, and visible-light photocatalytic bacterial inactivation of nano-zinc oxide. Polycrystalline wurtzite ZnO nanostructures with a hexagonal lattice having different shapes can be synthesized by means of vapor-, liquid-, and solid-phase processing techniques. Among these, ZnO hierarchical nanostructures prepared from the liquid phase route are commonly used for antimicrobial activity. In particular, plant extract-mediated biosynthesis is a single step process for preparing nano-ZnO without using surfactants and toxic chemicals. The phytochemical molecules of natural plant extracts are attractive agents for reducing and stabilizing zinc ions of zinc salt precursors to form green ZnO nanostructures. The peel extracts of certain citrus fruits like grapefruits, lemons and oranges, acting as excellent chelating agents for zinc ions. Furthermore, phytochemicals of the plant extracts capped on ZnO nanomaterials are very effective for killing various bacterial strains, leading to low minimum inhibitory concentration (MIC) values. Bioactive phytocompounds from green ZnO also inhibit hemolysis of Staphylococcus aureus infected red blood cells and inflammatory activity of mammalian immune system. In general, three mechanisms have been adopted to explain bactericidal activity of ZnO nanomaterials, including direct contact killing, reactive oxygen species (ROS) production, and released zinc ion inactivation. These toxic effects lead to the destruction of bacterial membrane, denaturation of enzyme, inhibition of cellular respiration and deoxyribonucleic acid replication, causing leakage of the cytoplasmic content and eventual cell death. Meanwhile, antimicrobial activity of doped and modified ZnO nanomaterials under visible light can be attributed to photogeneration of ROS on their surfaces. Thus particular attention is paid to the design and synthesis of visible light-activated ZnO photocatalysts with antibacterial properties.

Rapid Detection of Escherichia coli by β-Galactosidase Biosensor Based on ZnO NPs and MWCNTs: A Comparative Study

The need for alternative approaches for identifying pathogens has led researchers to focus on nanobiotechnology. In this study, zinc oxide nanoparticles (ZnO NPs) and multi-wall carbon nanotubes (MWCNTs) were used as marker molecules. After measuring the best concentration of these nanomaterials to inhibit the lactase activity of the beta-galactosidase enzymes by binding to them, different concentrations of Escherichia coli were added to the medium and their detection ability was finally compared with each other. Due to small size and high reactivity, these compounds are able to detect very low amount of bacteria in the ambient. In fact, the bacteria are attached to the nanoparticles and detach them from the enzyme and lead to substrate decomposition by the enzyme. MWCNTs exhibited better performance than ZnO NPs in detection of bacteria at very low concentration of 10¹ CFU/ml in 15 min. As a result, they are very appropriate to be utilized especially in the food industry.

Recent Advances in the Development of Biosensors for Malaria Diagnosis

The impact of malaria on global health has continually prompted the need to develop more effective diagnostic strategies that could overcome deficiencies in accurate and early detection. In this review, we examine the various biosensor-based methods for malaria diagnostic biomarkers, namely; Plasmodium falciparum histidine-rich protein 2 (PfHRP-2), parasite lactate dehydrogenase (pLDH), aldolase, glutamate dehydrogenase (GDH), and the biocrystal hemozoin. The models that demonstrate a potential for field application have been discussed, looking at the fabrication and analytical performance characteristics, including (but not exclusively limited to): response time, sensitivity, detection limit, linear range, and storage stability, which are first summarized in a tabular form and then described in detail. The conclusion summarizes the state-of-the-art technologies applied in the field, the current challenges and the emerging prospects for malaria biosensors.

Electrospun CNT embedded ZnO nanofiber based biosensor for electrochemical detection of Atrazine: a step closure to single molecule detection

In this study we have reported the design and development of a facile, sensitive, selective, and label-free electrochemical sensing platform for the detection of atrazine based on MWCNT-embedded ZnO nanofibers. Electrospun nanofibers were characterized using scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS), UV-Visible spectroscope (UV-VIS), and Fourier-transform infrared spectroscope (FTIR). Electrochemical properties of MWCNT-ZnO nanofiber-modified electrodes were assessed using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Binding event of atrazine to anti-atrazine antibody, which immobilized on nanofiber-modified electrode via EDC and NHS chemistry, was transduced with EIS. Due to high conductivity, surface area, and low bandgap of MWCNT-ZnO nanofibers, we have achieved the sensitivity and limit of detection (LoD) of sensor as 21.61 (KΩ μg^-1 mL^-1) cm^-2 and 5.368 zM for a wide detection range of 10 zM-1 µM. The proposed immunosensing platform has good stability, selectivity, repeatability, and reproducibility, and are less prone to interference.

Synthesis of Ni2+ ion doped ZnO–MWCNTs nanocomposites using an in situ sol–gel method: an ultra sensitive non-enzymatic uric acid sensing electrode material

Nickel (Ni²⁺) ion doped zinc oxide-multi-wall carbon nanotubes (NZC) with different composition ratios of MWCNTs (from 0.01 to 0.1 wt%) are synthesized through an in situ sol–gel method. The synthesized NZC nanocomposites (NCs) are used as electrode materials with glassy carbon electrodes (GCEs) for electrochemical detection of uric acid (UA). The cyclic voltammogram of the representative NZC 0.1 modified GCE (NZC 0.1/GCE) revealed the highest electrochemical sensing activity towards the oxidation of UA at 0.37 V in 0.2 M phosphate buffer solution (PBS) having pH 7.4 ± 0.02. The limit of detection (LOD) and limit of quantification (LOQ) for the NZC 0.1/GCE are determined to be 5.72 nM and 19.00 nM (S/N = 3) respectively, which is the lowest compared to the literature values reported for enzymatic and non-enzymatic detection techniques. The synergistic effect of NZC 0.1 NCs is proposed as one of the factors for the enhanced electrochemical oxidation of UA complemented by the phase, lattice parameters, functional groups, morphology, elemental compositions, types of bonding and specific surface area with pore size ascertained using various techniques. The synthesized NZC 0.1 NCs are further proposed as selective electrode materials for the electrochemical detection of UA as authenticated further by performing interference tests with other metabolites such as ascorbic acid (AA), dopamine (DA) and d-glucose. The optimized electrochemical studies are further adopted for sensing of UA from human excretion samples using NZC 0.1 NCs.

Nickel (Ni²⁺) ion doped zinc oxide-multi-wall carbon nanotubes (NZC) with different composition ratios of MWCNTs (from 0.01 to 0.1 wt%) are synthesized through an in situ sol–gel method.

ZnO-based nanostructured electrodes for electrochemical sensors and biosensors in biomedical applications

Fascinating properties of ZnO nanostructures have created much interest due to their importance in health care and environmental monitoring. Current worldwide production and their wide range of applications signify ZnO to be a representative of multi-functional oxide material. Recent nanotechnological developments have stimulated the production of various forms of ZnO nanostructures such as nano-layers, nanoparticles, nanowires, etc. Due to their enhanced sensing properties, improved binding ability with biomolecules as well as biological activities have enabled them as suitable candidates for the fabrication of biosensor devices in the biomedical arena. In this review, the synthesis of ZnO nanostructures, mechanism of their interaction with biomolecules and their applications as sensors in health care area are discussed considering the biosensors for molecules with small molecular weight, infectious diseases, and pharmaceutical compounds.

The Advances in Biomedical Applications of Carbon Nanotubes

Unique chemical, physical, and biological features of carbon nanotubes make them an ideal candidate for myriad applications in industry and biomedicine. Carbon nanotubes have excellent electrical and thermal conductivity, high biocompatibility, flexibility, resistance to corrosion, nano-size, and a high surface area, which can be tailored and functionalized on demand. This review discusses the progress and main fields of bio-medical applications of carbon nanotubes based on recently-published reports. It encompasses the synthesis of carbon nanotubes and their application for bio-sensing, cancer treatment, hyperthermia induction, antibacterial therapy, and tissue engineering. Other areas of carbon nanotube applications were out of the scope of this review. Special attention has been paid to the problem of the toxicity of carbon nanotubes.

All-carbon suspended nanowire sensors as a rapid highly-sensitive label-free chemiresistive biosensing platform

Nanowire sensors offer great potential as highly sensitive electrochemical and electronic biosensors because of their small size, high aspect ratios, and electronic properties. Nevertheless, the available methods to fabricate carbon nanowires in a controlled manner remain limited to expensive techniques. This paper presents a simple fabrication technique for sub-100 nm suspended carbon nanowire sensors by integrating electrospinning and photolithography techniques. Carbon Microelectromechanical Systems (C-MEMS) fabrication techniques allow fabrication of high aspect ratio carbon structures by patterning photoresist polymers into desired shapes and subsequent carbonization of resultant structures by pyrolysis. In our sensor platform, suspended nanowires were deposited by electrospinning while photolithography was used to fabricate support structures. We have achieved suspended carbon nanowires with sub-100 nm diameters in this study. The sensor platform was then integrated with a microfluidic chip to form a lab-on-chip device for label-free chemiresistive biosensing. We have investigated this nanoelectronics label-free biosensor's performance towards bacterial sensing by functionalization with Salmonella-specific aptamer probes. The device was tested with varying concentrations of Salmonella Typhimurium to evaluate sensitivity and various other bacteria to investigate specificity. The results showed that the sensor is highly specific and sensitive in detection of Salmonella with a detection limit of 10 CFU mL^-1. Moreover, this proposed chemiresistive assay has a reduced turnaround time of 5 min and sample volume requirement of 5 µL which are much less than reported in the literature.

Nonlithographic Fabrication of Plastic-Based Nanofibers Integrated Microfluidic Biochip for Sensitive Detection of Infectious Biomarker

We report fabrication of a fully integrated plastic based microfluidic biochip for biosensing application. The microfluidic channels were fabricated by tune transfer method and integrated with the prefunctionalized sensing platform. This approach to assembling microchannels into prefunctionalized sensing substrate facilitates controlled functionalization and prevents damages on the functionalized surface. The sensing platform comprised a three-electrode system, in which the sensing electrode was integrated with antibody immobilized carbon nanotubes-zinc oxide (C-ZnO) nanofibers. Electrospinning technique was used to synthesize C-ZnO nanofibers and the surface of the nanofibers was covalently conjugated with histidine rich protein II antibodies (AntiHRP II) toward detection of infectious malarial specific antigen, namely histidine-rich protein II (HRP II). The analytical performance of the fabricated biochip was evaluated by differential pulse voltammetry method. The device exhibited a high sensitivity of 1.19 mA/((g mL^-1)/cm²) over a wide detection range (10 fg/mL to 100 μg/mL) with a low detection limit of 7.5 fg/mL toward HRP II detection. This fully integrated biochip offers a promising cost-effective approach for detection of several other infectious disease biomarkers.