Assembly of Dynamic Gated and Cascaded Transient DNAzyme Networks

The dynamic transient formation and depletion of G-quadruplexes regulate gene replication and transcription. This process was found to be related to various diseases such as cancer and premature aging. We report on the engineering of nucleic acid modules revealing dynamic, transient assembly and disassembly of G-quadruplex structures and G-quadruplex-based DNAzymes, gated transient processes, and cascaded dynamic transient reactions that involve G-quadruplex and DNAzyme structures. The dynamic transient processes are driven by functional DNA reaction modules activated by a fuel strand and guided toward dissipative operation by a nicking enzyme (Nt.BbvCI). The dynamic networks were further characterized by computational simulation of the experiments using kinetic models, allowing us to predict the dynamic performance of the networks under different auxiliary conditions applied to the systems. The systems reported herein could provide functional DNA machineries for the spatiotemporal control of G-quadruplex structures perturbing gene expression and thus provide a therapeutic means for related emergent diseases.

Photoswitchable Binary Nanopore Conductance and Selective Electronic Detection of Single Biomolecules under Wavelength and Voltage Polarity Control

We fabricated photoregulated thin-film nanopores by covalently linking azobenzene photoswitches to silicon nitride pores with ∼10 nm diameters. The photoresponsive coatings could be repeatedly optically switched with deterministic ∼6 nm changes to the effective nanopore diameter and of ∼3× to the nanopore ionic conductance. The sensitivity to anionic DNA and a neutral complex carbohydrate biopolymer (maltodextrin) could be photoswitched "on" and "off" with an analyte selectivity set by applied voltage polarity. Photocontrol of nanopore state and mass transport characteristics is important for their use as ionic circuit elements (e.g., resistors and binary bits) and as chemically tuned filters. It expands single-molecule sensing capabilities in personalized medicine, genomics, glycomics, and, augmented by voltage polarity selectivity, especially in multiplexed biopolymer information storage schemes. We demonstrate repeatedly photocontrolled stable nanopore size, polarity, conductance, and sensing selectivity, by illumination wavelength and voltage polarity, with broad utility including single-molecule sensing of biologically and technologically important polymers.

Photosensitive and Photoswitchable TRPA1 Agonists Optically Control Pain through Channel Desensitization

Transient receptor potential ankyrin 1 (TRPA1) channel, as a nonselective ligand-gated cation channel robustly in dorsal root ganglion sensory neurons, is implicated in sensing noxious stimuli and nociceptive signaling. However, small-molecule tools targeting TRPA1 lack temporal and spatial resolution, limiting their use for validation of TRPA1 as a therapeutic target for pain. In our previous work, we found that 4,4'-(diazene-1,2-diyl)dianiline (AB1) is a photoswitchable TRPA1 agonist, but the poor water solubility and activity hinder its further development. Here, we report a series of specific and potent azobenzene-derived photoswitchable TRPA1 agonists (series 1 and 2) that enable optical control of the TRPA1 channel. Two representative compounds 1g and 2c can alleviate capsaicin-induced pain in the cheek model of mice through channel desensitization but not in TRPA1 knockout mice. Taken together, our findings demonstrate that photoswitchable TRPA1 agonists can be used as pharmacological tools for study of pain signaling.

The structure and unzipping behavior of dumbbell and hairpin DNA revealed by real-time nanopore sensing

Hairpin structures play an essential role in DNA replication, transcription, and recombination. Single-molecule studies enable the real-time measurement and observation of the energetics and dynamics of hairpin structures, including folding and DNA-protein interactions. Nanopore sensing is emerging as a powerful tool for DNA sensing and sequencing, and previous research into hairpins using an α-hemolysin (α-HL) nanopore suggested that hairpin DNA enters from its stem side. In this work, the translocation and interaction of hairpin and dumbbell DNA samples with varying stems, loops, and toeholds were investigated systematically using a Mycobacterium smegmatis porin A (MspA) nanopore. It was found that these DNA constructs could translocate through the pore under a bias voltage above +80 mV, and blockage events with two conductance states could be observed. The events of the lower blockage were correlated with the loop size of the hairpin or dumbbell DNA (7 nt to 25 nt), which could be attributed to non-specific collisions with the pore, whereas the dwell time of events with the higher blockage were correlated with the stem length, thus indicating effective translocation. Furthermore, dumbbell DNA with and without a stem opening generated different dwell times when driven through the MspA nanopore. Finally, a new strategy based on the dwell time difference was developed to detect single nucleotide polymorphisms (SNPs). These results demonstrated that the unzipping behaviors and DNA-protein interactions of hairpin and dumbbell DNA could be revealed using nanopore technology, and this could be further developed to create sensors for the secondary structures of nucleic acids.

Reversible photo-regulation on the folding/unfolding of telomere G-quadruplexes with solid-state nanopores

The formation of G-quadruplexes (G4) in human telomere and other important biological regions inhibits the replication and transcription of DNA, thereby influencing further cell proliferation. The investigation of G4 formation and unfolding is vital for understanding their modulation in biological processes and life science. Photo regulation is a facile and sensitive approach for monitoring the structures of biomacromolecules and material surface properties. The nanopore-based technique is also prevalent for label-free single-molecule characterization with high accuracy. This study provides a combination of solid-state nanopore technology with light-switch as a platform for the modulation of human telomere G4 formation and splitting under switchable light exposure. The introduction of molecular switch, namely azobenzene moiety at different positions of the DNA sequence influences the formation and stability of G4. Three azobenzenes immobilized on each of the G-quartet plane (hTelo-3azo-p) or four azobenzenes on the same plane (hTelo-4azo-4p) of the human telomere G4 sequence realized the reversible control of G4 folding/unfolding at the temporal scale upon photo regulation, and the formation and splitting of G4 with hTelo-4azo-4p is slower and not thorough compared to that with hTelo-3azo-p due to the coplanar steric hindrance. Moreover, the G4 formation recorded with the combined nanopore and photo-responsive approach was also characterized with fluorescence, and the variation in the fluorescence intensity of the NMM and G4 complex exhibited a different tendency under reverse light irradiation due to the distinct interactions of NMM with the azobenzene-modified G4. Our study demonstrated a controllable and sensitive way for the manipulation of G4 structures, which will be inspiring for the intervention of G4-related cell senescence, cancer diagnosis and drug exploration.

Precise Cross-Dimensional Regulation of the Structure of a Photoreversible DNA Nanoswitch

In this study, an accurately and digitally regulated allosteric nanoswitch based on the conformational control of two DNA hairpins was developed. By switching between UV irradiation and blue light conditions, the second molecular beacon (H#2) would bind/separate with a repression sequence (RES) via the introduced PTG molecules (a photosensitive azobenzene derivative), resulting in the target aptamer sequence in the first molecular beacon (H#1) not being able/being able to hold the stem-loop configuration, hence losing/regaining the ability to bind with the target. Importantly, we successfully monitor conformation changes of the nanoswitch by an elegant mathematical model for connecting K_i (the dissociation constant between RES and H#2) with K_d (the overall equilibrium constant of the nanoswitch binding the target), hence realizing "observing" DNA structure across dimensions from "structural visualization" to digitization and, accurately, digitally regulating DNA structure from digitization to "structural visualization".

Photoregulation between small DNAs and reversible photochromic molecules

Oligonucleotides are widely used biological materials in the fields of biomedicine, nanotechnology, and materials science. Due to the demands for the photoregulation of DNA activities, scientists are placing more and more research interest in the interactions between reversible photochromic molecules and DNAs. Photochromic molecules can work as switches for regulating the DNAs' behavior under light irradiation; meanwhile, DNAs also exert influence over the photochromic molecules. The photochromic molecules can be attached to DNAs either by covalent bonds or by noncovalent forces, which results in different regulative functions. Azobenzenes, spiropyrans, diarylethenes, and stilbene-like compounds are important photochromic molecules working as photoswitches. By summarizing their interactions with oligonucleotides, this review intends to facilitate the relevant research on oligonucleotides/photochromic molecules in the biological and medicinal fields and in materials science.

Reversible Photocontrolled Nanopore Assembly

Self-assembly is a fundamental feature of biological systems, and control of such processes offers fascinating opportunities to regulate function. Fragaceatoxin C (FraC) is a toxin that upon binding to the surface of sphingomyelin-rich cells undergoes a structural metamorphosis, leading to the assembly of nanopores at the cell membrane and causing cell death. In this study we attached photoswitchable azobenzene pendants to various locations near the sphingomyelin binding pocket of FraC with the aim of remote controlling the nanopore assembly using light. We found several constructs in which the affinity of the toxin for biological membranes could be activated or deactivated by irradiation, thus enabling reversible photocontrol of pore formation. Notably, one construct was completely inactive in the thermally adapted state; it however induced full lysis of cultured cancer cells upon light irradiation. Selective irradiation also allowed isolation of individual nanopores in artificial lipid membranes. Photocontrolled FraC might find applications in photopharmacology for cancer therapeutics and has potential to be used for the fabrication of nanopore arrays in nanopore sensing devices, where the reconstitution, with high spatiotemporal precision, of single nanopores must be controlled.

Synthetically Diversified Protein Nanopores: Resolving Click Reaction Mechanisms

Nanopores are emerging as a powerful tool for the investigation of nanoscale processes at the single-molecule level. Here, we demonstrate the methionine-selective synthetic diversification of α-hemolysin (α-HL) protein nanopores and their exploitation as a platform for investigating reaction mechanisms. A wide range of functionalities, including azides, alkynes, nucleotides, and single-stranded DNA, were incorporated into individual pores in a divergent fashion. The ion currents flowing through the modified pores were used to observe the trajectory of a range of azide-alkyne click reactions and revealed several short-lived intermediates in Cu(I)-catalyzed azide-alkyne [3 + 2] cycloadditions (CuAAC) at the single-molecule level. Analysis of ion-current fluctuations enabled the populations of species involved in rapidly exchanging equilibria to be determined, facilitating the resolution of several transient intermediates in the CuAAC reaction mechanism. The versatile pore-modification chemistry offers a useful approach for enabling future physical organic investigations of reaction mechanisms at the single-molecule level.

Azologization of serotonin 5-HT3 receptor antagonists

The serotonin 5-hydroxytryptamine 3 receptor (5-HT3R) plays a unique role within the seven classes of the serotonin receptor family, as it represents the only ionotropic receptor, while the other six members are G protein-coupled receptors (GPCRs). The 5-HT3 receptor is related to chemo-/radiotherapy provoked emesis and dysfunction leads to neurodevelopmental disorders and psychopathologies. Since the development of the first serotonin receptor antagonist in the early 1990s, the range of highly selective and potent drugs expanded based on various chemical structures. Nevertheless, on-off-targeting of a pharmacophore's activity with high spatiotemporal resolution as provided by photopharmacology remains an unsolved challenge bearing additionally the opportunity for detailed receptor examination. In the presented work, we summarize the synthesis, photochromic properties and in vitro characterization of azobenzene-based photochromic derivatives of published 5-HT3R antagonists. Despite reported proof of principle of direct azologization, only one of the investigated derivatives showed antagonistic activity lacking isomer specificity.

Controlling the Catalytic and Optical Properties of Aggregated Nanoparticles or Semiconductor Quantum Dots Using DNA-Based Constitutional Dynamic Networks

Nucleic acid-based constitutional dynamic networks (CDNs) attract growing interest as a means to mimic complex biological networks. The triggered stabilization of the CDNs allows the dictated guided reversible reconfiguration and re-equilibration of the CDNs to other CDN configurations, where some of the constituents are up-regulated, while other constituents are down-regulated. Although substantial progress in controlling the adaptive dynamic control of the compositions of networks by means of auxiliary triggers was demonstrated, the use of CDNs as active ensembles for controlling chemical functionalities is still a challenge. We report on the assembly of signal-triggered CDN systems that guide the switchable aggregation of Au nanoparticles (NPs), thereby controlling their plasmonic properties and their catalytic functions (Au NPs-catalyzed oxidation of l-DOPA to dopachrome). In addition, we demonstrate that the triggered and orthogonal up-regulation and down-regulation of the constituents of the CDNs leads to the dictated aggregation of different-sized CdSe/ZnS quantum dots (QDs), cross-linked by K⁺-ion-stabilized G-quadruplex units. The incorporation of hemin into the G-quadruplex cross-linking units yields horseradish peroxidase-mimicking DNAzyme units that catalyze the generation of chemiluminescence via the oxidation of luminol by H₂O₂. The resulting chemiluminescence stimulates the chemiluminescence resonance energy transfer (CRET) process to the QDs, resulting in the luminescence of the two-sized QDs. By the application of appropriate triggers, the CDN-dictated up-regulation and down-regulation of the different-sized QDs aggregates are demonstrated, and the control over the photophysical functions of the different-sized QDs, by means of the CDNs, is highlighted.

Label-Free Detection of DNA Mutations by Nanopore Analysis

Cancers are caused by mutations to genes that regulate cell normal functions. The capability to rapid and reliable detection of specific target gene variations can facilitate early disease detection and diagnosis and also enables personalized treatment of cancer. Most of the currently available methods for DNA mutation detection are time-consuming and/or require the use of labels or sophisticated instruments. In this work, we reported a label-free enzymatic reaction-based nanopore sensing strategy to detect DNA mutations, including base substitution, deletion, and insertion. The method was rapid and highly sensitive with a detection limit of 4.8 nM in a 10 min electrical recording. Furthermore, the nanopore assay could differentiate among perfect match, one mismatch, and two mismatches. In addition, simulated serum samples were successfully analyzed. Our developed nanopore-based DNA mutation detection strategy should find useful application in genetic diagnosis.

Real-Time and Accurate Identification of Single Oligonucleotide Photoisomers via an Aerolysin Nanopore

Identification of the configuration for the photoresponsive oligonucleotide plays an important role in the ingenious design of DNA nanomolecules and nanodevices. Due to the limited resolution and sensitivity of present methods, it remains a challenge to determine the accurate configuration of photoresponsive oligonucleotides, much less a precise description of their photoconversion process. Here, we used an aerolysin (AeL) nanopore-based confined space for real-time determination and quantification of the absolute cis/ trans configuration of each azobenzene-modified oligonucleotide (Azo-ODN) with a single molecule resolution. The two completely separated current distributions with narrow peak widths at half height (<0.62 pA) are assigned to cis/ trans-Azo-ODN isomers, respectively. Due to the high current sensitivity, each isomer of Azo-ODN could be undoubtedly identified, which gives the accurate photostationary conversion values of 82.7% for trans-to- cis under UV irradiation and 82.5% for cis-to- trans under vis irradiation. Further real-time kinetic evaluation reveals that the photoresponsive rate constants of Azo-ODN from trans-to- cis and cis-to -trans are 0.43 and 0.20 min^-1, respectively. This study will promote the sophisticated design of photoresponsive ODN to achieve an efficient and applicable photocontrollable process.

Biological Nanopores: Confined Spaces for Electrochemical Single-Molecule Analysis

Nanopore sensing is developing into a powerful single-molecule approach to investigate the features of biomolecules that are not accessible by studying ensemble systems. When a target molecule is transported through a nanopore, the ions occupying the pore are excluded, resulting in an electrical signal from the intermittent ionic blockade event. By statistical analysis of the amplitudes, duration, frequencies, and shapes of the blockade events, many properties of the target molecule can be obtained in real time at the single-molecule level, including its size, conformation, structure, charge, geometry, and interactions with other molecules. With the development of the use of α-hemolysin to characterize individual polynucleotides, nanopore technology has attracted a wide range of research interest in the fields of biology, physics, chemistry, and nanoscience. As a powerful single-molecule analytical method, nanopore technology has been applied for the detection of various biomolecules, including oligonucleotides, peptides, oligosaccharides, organic molecules, and disease-related proteins. In this Account, we highlight recent developments of biological nanopores in DNA-based sensing and in studying the conformational structures of DNA and RNA. Furthermore, we introduce the application of biological nanopores to investigate the conformations of peptides affected by charge, length, and dipole moment and to study disease-related proteins' structures and aggregation transitions influenced by an inhibitor, a promoter, or an applied voltage. To improve the sensing ability of biological nanopores and further extend their application to a wider range of molecular sensing, we focus on exploring novel biological nanopores, such as aerolysin and Stable Protein 1. Aerolysin exhibits an especially high sensitivity for the detection of single oligonucleotides both in current separation and duration. Finally, to facilitate the use of nanopore measurements and statistical analysis, we develop an integrated current measurement system and an accurate data processing method for nanopore sensing. The unique geometric structure of a biological nanopore offers a distinct advantage as a nanosensor for single-molecule sensing. The construction of the pore entrance is responsible for capturing the target molecule, while the lumen region determines the translocation process of the single molecule. Since the capture of the target molecule is predominantly diffusion-limited, it is expected that the capture ability of the nanopore toward the target analyte could be effectively enhanced by site-directed mutations of key amino acids with desirable groups. Additionally, changing the side chains inside the wall of the biological nanopore could optimize the geometry of the pore and realize an optimal interaction between the single-molecule interface and the analyte. These improvements would allow for high spatial and current resolution of nanopore sensors, which would ensure the possibility of dynamic study of single biomolecules, including their metastable conformations, charge distributions, and interactions. In the future, data analysis with powerful algorithms will make it possible to automatically and statistically extract detailed information while an analyte translocates through the pore. We conclude that these improvements could have tremendous potential applications for nanopore sensing in the near future.