The confined surface C2N/Pt(111) as a highly efficient catalyst for CO oxidation

The problem of poisoning on the surface of catalysts used in CO oxidation reactions, such as Pt, needs to be solved. In this work, we constructed lattice-matched C2N/Pt(111) catalysts with different configurations (top/fcc/hcp) and found that, within the confined space between the cover and the substrate, the adsorption energy of CO is reduced by 0.35 eV to 0.43 eV, while the adsorption of other reactants O/O2 is strengthened and the adsorption energy of the product CO2 is positive, indicating that the constraint effect produced by C2N and Pt(111) is beneficial to CO oxidation, when compared to the pure Pt(111). Our work suggests that the C2N cover not only protects the Pt surface under harsh conditions but also allows gaseous molecules CO and O2 to approach the Pt surface through a facile intercalation process, with enhanced surface reactivity for CO oxidation and reduced catalyst poisoning.

Highly Reliable 3D Channel Memory and Its Application in a Neuromorphic Sensory System for Hand Gesture Recognition

Brain-inspired neuromorphic computing systems, based on a crossbar array of two-terminal multilevel resistive random-access memory (RRAM), have attracted attention as promising technologies for processing large amounts of unstructured data. However, the low reliability and inferior conductance tunability of RRAM, caused by uncontrollable metal filament formation in the uneven switching medium, result in lower accuracy compared to the software neural network (SW-NN). In this work, we present a highly reliable CoOx-based multilevel RRAM with an optimized crystal size and density in the switching medium, providing a three-dimensional (3D) grain boundary (GB) network. This design enhances the reliability of the RRAM by improving the cycle-to-cycle endurance and device-to-device stability of the I-V characteristics with minimal variation. Furthermore, the designed 3D GB-channel RRAM (3D GB-RRAM) exhibits excellent conductance tunability, demonstrating high symmetricity (624), low nonlinearity (βLTP/βLTD ∼ 0.20/0.39), and a large dynamic range (Gmax/Gmin ∼ 31.1). The cyclic stability of long-term potentiation and depression also exceeds 100 cycles (105 voltage pulses), and the relative standard deviation of Gmax/Gmin is only 2.9%. Leveraging these superior reliability and performance attributes, we propose a neuromorphic sensory system for finger motion tracking and hand gesture recognition as a potential elemental technology for the metaverse. This system consists of a stretchable double-layered photoacoustic strain sensor and a crossbar array neural network. We perform training and recognition tasks on ultrasonic patterns associated with finger motion and hand gestures, attaining a recognition accuracy of 97.9% and 97.4%, comparable to that of SW-NN (99.8% and 98.7%).

Co3 O4 -CeO2 Nanocomposites for Low-Temperature CO Oxidation

In an effort to combine the favorable catalytic properties of Co₃ O₄ and CeO₂ , nanocomposites with different phase distribution and Co₃ O₄ loading were prepared and employed for CO oxidation. Synthesizing Co₃ O₄ -modified CeO₂ via three different sol-gel based routes, each with 10.4 wt % Co₃ O₄ loading, yielded three different nanocomposite morphologies: CeO₂ -supported Co₃ O₄ layers, intermixed oxides, and homogeneously dispersed Co. The reactivity of the resulting surface oxygen species towards CO were examined by temperature programmed reduction (CO-TPR) and flow reactor kinetic tests. The first morphology exhibited the best performance due to its active Co₃ O₄ surface layer, reducing the light-off temperature of CeO₂ by about 200 °C. In contrast, intermixed oxides and Co-doped CeO₂ suffered from lower dispersion and organic residues, respectively. The performance of Co₃ O₄ -CeO₂ nanocomposites was optimized by varying the Co₃ O₄ loading, characterized by X-ray diffraction (XRD) and N₂ sorption (BET). The 16-65 wt % Co₃ O₄ -CeO₂ catalysts approached the conversion of 1 wt % Pt/CeO₂ , rendering them interesting candidates for low-temperature CO oxidation.

Atomically Dispersed Co2+ Sites Incorporated into a Silicalite-1 Zeolite Framework as a High-Performance and Coking-Resistant Catalyst for Propane Nonoxidative Dehydrogenation to Propylene

Propane nonoxidative dehydrogenation (PDH) is a promising route to produce propylene with the development of shale gas exploration technology. Co-based catalysts with low cost and low toxicity could activate C-H effectively, but they suffer from deactivation with coke formation. In this work, a catalyst formed by incorporating highly dispersed Co sites into a Silicalite-1 zeolite framework (Co-Silicalite-1) is synthesized by a hydrothermal protocol in the presence of ammonia, which exhibits superior propane dehydrogenation catalytic performance with 0.0946 mmol C₃H₆·s^-1·g_Co^-1 and propylene selectivity higher than 98.5%. It also shows outstanding catalytic stability and coking resistance in a 3560 min time-on-stream. Combined characterization results demonstrate that the tetrahedrally coordinated Co²⁺ site serves as the PDH catalytic active site, which is stabilized by Si-O units of the zeolite framework. Incorporation of Co sites into the zeolite framework could avoid the reduction of Co species to metallic Co. Moreover, the catalytic performance is improved by the enhanced propane adsorption and propylene desorption.

Engineering Nanoscale Interfaces of Metal/Oxide Nanowires to Control Catalytic Activity

The interfacial effect between a metal catalyst and its various supporting transition metal oxides on the catalytic activity of heterogeneous catalysis has been extensively explored; engineering interfacial sites of metal supported on metal oxide has been found to influence catalytic performance. Here, we investigate the interfacial effect of Pt nanowires (NWs) vertically and alternatingly stacked with titanium dioxide (TiO₂) or cobalt monoxide (CoO) NWs, which exhibit a strong metal-support interaction under carbon monoxide (CO) oxidation. High-resolution nanotransfer printing based on nanoscale pattern replication and e-beam evaporation were utilized to obtain the Pt NWs cross-stacked on the CoO or TiO₂ NW on the silicon dioxide (SiO₂) substrate with varying numbers of nanowires. The morphology and interfacial area were precisely determined by means of atomic force microscopy and scanning electron microscopy. The cross-stacked Pt/TiO₂ NW and Pt/CoO NW catalysts were estimated with CO oxidation under 40 Torr CO and 100 Torr O₂ from 200 to 240 °C. Higher catalytic activity was found on the Pt/CoO NW catalyst than on Pt/TiO₂ NWs and Pt NWs, which indicates the significance of nanoscale metal-oxide interfaces. As the number of nanowire layers increased, the catalytic activity became saturated. Our study demonstrates the interfacial role of nanoscale metal-oxide interfaces under CO oxidation, which has intriguing applications in the smart design of catalytic materials.

Present and new frontiers in materials research by ambient pressure x-ray photoelectron spectroscopy

In this topical review we catagorise all ambient pressure x-ray photoelectron spectroscopy publications that have appeared between the 1970s and the end of 2018 according to their scientific field. We find that catalysis, surface science and materials science are predominant, while, for example, electrocatalysis and thin film growth are emerging. All catalysis publications that we could identify are cited, and selected case stories with increasing complexity in terms of surface structure or chemical reaction are discussed. For thin film growth we discuss recent examples from chemical vapour deposition and atomic layer deposition. Finally, we also discuss current frontiers of ambient pressure x-ray photoelectron spectroscopy research, indicating some directions of future development of the field.

Effect of Hydrazine Pretreatment on the Activity, Stability and Active Sites of Cobalt Species for Preferential Oxidation (PROX) of CO in H2-Rich Stream

The as-prepared (Co3O4) and hydrazine-treated (Co3O4(H)) cobalt catalysts were prepared using the precipitation method and evaluated at a temperature range of 40–220 °C for preferential oxidation (PROX) of CO in excess hydrogen. An improved surface reducibility with smaller crystallite size was noted on hydrazine-treated cobalt species (i.e., Co3O4(H) catalyst), which indicates some surface transformation. This finding correlates with the surface roughness formation (as depicted by scanning electron microscope (SEM) and transmission electron microscope (TEM) data), which was further confirmed by an increase in the Brunauer–Emmett–Teller (BET) surface area. The mesoporous structure of the Co3O4(H) catalyst remained intact, as compared to that of the Co3O4 catalyst. Interestingly, the in situ treatment of the standalone Co3O4(H) catalyst decreased the maximum CO conversion temperature (T100%) from 160 °C (over Co3O4) to 100 °C, with good selectivity. The Co3O4(H) catalyst showed good stability, with approximately 85% CO conversion at 100 °C for 21 h, as compared to a faster deactivation of the Co3O4 catalyst. However, the Co3O4(H) catalyst was unstable in both CO2 and the moisture environment. Based on the evaluation of spent hydrazine-treated (CoO(H)) cobalt catalyst, the high PROX activity is associated with the formation of Co3+ species as confirmed by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), and temperature-programmed reduction (TPR) data.

Metal-Support Interactions in CeO2- and SiO2-Supported Cobalt Catalysts: Effect of Support Morphology, Reducibility, and Interfacial Configuration

With the increasing demand for highly efficient and durable catalysts, researchers have been doing extensive research to engineer the shape, size, and even phase (e.g., hcp or fcc Co) of individual catalyst nanoparticles, as well as the interface structure between the catalyst and support. In this work, cobalt oxides were deposited on ceria with rod-like morphology (CeO₂NR) and cube-like morphology (CeO₂NC) and silica with sphere-like morphology (SiO₂NS) via a precipitation-deposition method to investigate the effects of support morphology, surface defects, support reducibility, and the metal-support interactions on redox and catalytic properties. XRD, Raman, XPS, BET, H₂-TPR, O₂-TPD, CO-TPD, TEM, and TPR/TPO cycling measurements have been mainly employed for catalysts characterization. Compared with CeO₂NC and SiO₂NS supports, as well as CeO₂NC- and SiO₂NS-supported cobalt catalysts, CeO₂NR counterparts exhibited enhanced reducibility and CO oxidation performance at a lower temperature. Both the apparent activation energy and CO conversion demonstrated the following catalytic activity order: 10 wt % CoO _x/CeO₂NR > 10 wt % CoO _x/CeO₂NC > 10 wt % CoO _x/SiO₂NS. These results showed a strong support-dependent reducibility, CO oxidation, and redox cycling activity/stability of the as-prepared catalysts. Moreover, the significantly enhanced catalytic CO oxidation of the 10 wt % CoO _x/CeO₂NR catalyst indicated the vital role of CeO₂NR support with rich surface oxygen vacancies, superior oxygen storage capacity and mobility, and excellent adsorption/desorption behavior of CO and O₂ species.

The Preparation and Catalytic Properties of Nanoporous Pt/CeO2 Composites with Nanorod Framework Structures

Pt/CeO₂ catalysts with nanoporous structures were prepared by the facile dealloying of melt-spun Al_92-XCe₈Pt_X (X = 0.1; 0.3 and 0.5) ribbons followed by calcination. The phase compositions and structural parameters of the catalysts were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). The specific surface area and pore size distribution were characterized by N₂ adsorption-desorption tests. The catalytic properties were evaluated by a three-way catalyst (TWC) measurement system. The results revealed that the dealloyed samples exhibited a nanorod framework structure. The Pt nanoparticles that formed in situ were supported and highly dispersed on the CeO₂ nanorod surface and had sizes in the range of 2-5 nm. For the catalyst prepared from the melt-spun Al_91.7Ce₈Pt_0.3 ribbons, the 50% CO conversion temperature (T₅₀) was 91 °C, and total CO could be converted when the temperature was increased to 113 °C. An X-ray photoelectron spectroscopy (XPS) test showed that the Pt_0.3/CeO₂ sample had a slightly richer oxygen vacancy; and a H₂ temperature-programmed reduction (H₂-TPR) test demonstrated its superior adsorption ability for reduction gas and high content of active oxygen species. The experiments indicated that the catalytic performance could be retained without any attenuation after 130 h when water and CO₂ were present in the reaction gas. The favorable catalytic activities were attributed to the high specific areas and small pore and Pt particle sizes as well as the strong interactions between the CeO₂ and Pt nanoparticles. The Pt nanoparticles were embedded in the surface of the CeO₂ nanorods, inhibiting growth. Therefore, the catalytic stability and water resistance were excellent.

A mini review of in situ near-ambient pressure XPS studies on non-noble, late transition metal catalysts

The rich surface chemistry of Fe, Co, Ni and Cu during heterogeneous catalytic reactions from the perspective of NAP-XPS studies.