Influence of strong π-acceptor ligands on Cr-K-edge X-ray absorption spectral signatures and consequences for the interpretation of surface sites in the Phillips catalyst

X-ray absorption spectroscopy (XAS) has been central to the study of the Phillips polymerization catalyst (CrO3/SiO2). As Cr K-edge XAS signatures are sensitive to the oxidation state, geometry and types of ligands on surface (active) sites, the superposition of these effects makes their interpretation challenging. Notably, CO has been particularly used as a reductant to generate low valent Cr sites from CrO3/SiO2 and as a structural IR probe for analysing reduced Cr surface sites. Hence, it is essential to establish a solid understanding of the spectroscopic impact of CO on low-valent Cr sites. We thus built a series of fully characterized low-valent Cr molecular compounds bearing isoelectronic isocyanide ligands in place of CO, with the goal of understanding the effect of the coordination of π-acceptor ligands on the XANES signature of Cr sites. Cr K-edge spectra supplemented with DFT calculations elucidate the effect of the coordination of π-acceptor ligands on XAS signatures, giving a sharp resonance at the white line while modifying the fine structure due to short Cr-C distances and stability of low-spin Cr(ii/iii) species. The isocyanide references allow the deconvolution of the XAS spectra of the reduced CrO3/SiO2 catalyst by evaluating the types of surface species and relative amounts of bound CO at different CO pressures and temperatures.

Reduction of Cofed Carbon Dioxide Modifies the Local Coordination Environment of Zeolite-Supported, Atomically Dispersed Chromium to Promote Ethane Dehydrogenation

The reduction of CO2 is known to promote increased alkene yields from alkane dehydrogenations when the reactions are cocatalyzed. The mechanism of this promotion is not understood in the context of catalyst active-site environments because CO2 is amphoteric, and even general aspects of the chemistry, including the significance of competing side reactions, differ significantly across catalysts. Atomically dispersed chromium cations stabilized in highly siliceous MFI zeolite are shown here to enable the study of the role of parallel CO2 reduction during ethylene-selective ethane dehydrogenation. Based on infrared spectroscopy and X-ray absorption spectroscopy data interpreted through calculations using density functional theory (DFT), the synthesized catalyst contains atomically dispersed Cr cations stabilized by silanol nests in micropores. Reactor studies show that cofeeding CO2 increases stable ethylene-selective ethane dehydrogenation rates over a wide range of partial pressures. Operando X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine-structure (EXAFS) spectra indicate that during reaction at 650 °C the Cr cations maintain a nominal 2+ charge and a total Cr-O coordination number of approximately 2. However, CO2 reduction induces a change, correlated with the CO2 partial pressure, in the population of two distinct Cr-O scattering paths. This indicates that the promotional effect of parallel CO2 reduction can be attributed to a subtle change in Cr-O bond lengths in the local coordination environment of the active site. These insights are made possible by simultaneously fitting multiple EXAFS spectra recorded in different reaction conditions; this novel procedure is expected to be generally applicable for interpreting operando catalysis EXAFS data.

Ethane and Propane Dehydrogenation on Small Platinum Clusters Supported on Silica: An Ab Initio Molecular Dynamics and DFT Study

The size-dependent activity of catalysts has been researched for a long time in the field of catalysis. Positively charged small Pt clusters enhance catalytic activity than bigger clusters and bulk for propane dehydrogenation. We performed DFT calculations on small Pt clusters adsorbed on silica support. The planar structure of Pt clusters is present till 4 Pt atoms, after which three-dimensional structures are observed. AIMD and DFT calculations for silica showed that it has a high surface area and thermal stability suitable to conduct dehydrogenation reactions. The adsorption of Pt cluster on silica results in the formation of directional bonds which affects the properties of the adsorbed Pt catalysts by changing the redox properties. In the bulk phase, ethane and propane molecules undergo dehydrogenation reactions with 0.133 eV atom-1 and 0.244 eV atom-1 energies, respectively. NEB calculations showed that except for Pt-2/SiO2 , all the even Pt clusters require less activation energy than the neighboring odd Pt clusters. Ethane molecule interacting with Pt-4/SiO2 , Pt-5/SiO2 , Pt-6/SiO2 , and propane with Pt-3/SiO2, Pt-4/SiO2 , Pt-5/SiO2 , Pt-6/SiO2 , follows the reverse Horiuti-Polanyi mechanism during dehydrogenation, whereas non-reverse Horiuti-Polanyi mechanism (which requires comparatively lower activation energy) is followed for smaller Pt clusters.

Recent Advances in the Applications of Mesoporous Silica in Heterogenous Catalysis

Mesoporous silica is a class of silica material with a large specific surface area, high specific pore volume and meso-sized pores. These properties make mesoporous silica a good choice of...

Propane to olefins tandem catalysis: a selective route towards light olefins production

On-purpose synthetic routes for propylene production have emerged in the last couple of decades in response to the increasing demand for plastics and a shift to shale gas feedstocks for ethylene production. Propane dehydrogenation (PDH), an efficient and selective route to produce propylene, saw booming investments to fill the so-called propylene gap. In the coming years, however, a fluctuating light olefins market will call for flexibility in end-product of PDH plants. This can be achieved by combining PDH with propylene metathesis in a single step, propane to olefins (PTO), which allows production of mixtures of propylene, ethylene and butenes, which are important chemical building blocks for a.o. thermoplastics. The metathesis technology introduced by Phillips in the 1960s and mostly operated in reverse to produce propylene, is thus undergoing a renaissance of scientific and technological interest in the context of the PTO reaction. In this review, we will describe the state-of-the-art of PDH, propylene metathesis and PTO reactions, highlighting the open challenges and opportunities in the field. While the separate PDH and metathesis reactions have been extensively studied in the literature, understanding the whole PTO tandem-catalysis system will require new efforts in theoretical modelling and operando spectroscopy experiments, to gain mechanistic insights into the combined reactions and finally improve catalytic selectivity and stability for on-purpose olefins production.

Flowing-Air-Induced Transformation to Promote the Dispersion of the CrOx Catalyst for Propane Dehydrogenation

Highly dispersed chromium (Cr)-based catalysts are promising candidates for the catalytic dehydrogenation of propane (DHP). However, the easier aggregation of Cr species into crystalline Cr₂O₃ at the high-temperature calcination and reaction process is a big challenge, which severely restricts the improvement of activity and stability of the DHP reaction. Herein, a flowing-air-induced transformation method was first proposed, and the catalytic performance of the prepared Cr/MCM-41 catalysts was found to be significantly improved compared to that of the Cr-based catalyst prepared by the traditional calcination method, even better than that of most of the reported Cr-based catalysts and some noble metal-based catalysts. X-ray absorption spectroscopy and in situ Raman spectroscopy as well as other characterization techniques demonstrated that the in situ calcination in flowing air could not only effectively restrain the conversion of Cr(VI) into Cr(III) but also largely improve the dispersion of Cr species. Furthermore, DHP activity is found to have a positive correlation with the amount of monomeric Cr(VI) species, which is proved to be the precursor of active coordinatively unsaturated Cr sites. Our proposed flowing-air-induced transformation method provides a general strategy for preparing the highly dispersed Cr-based catalysts and other metal oxide materials with varied valence and exhibits potential application prospects in industry.

Recent progress in heterogeneous metal and metal oxide catalysts for direct dehydrogenation of ethane and propane

Metal and metal oxide catalysts for non-oxidative ethane/propane dehydrogenation are outlined with respect to catalyst synthesis, structure–property relationship and catalytic mechanism.

Catalytic conversion of ethane to valuable products through non-oxidative dehydrogenation and dehydroaromatization

Chemical utilization of ethane to produce valuable chemicals has become especially attractive since the expanded utilization of shale gas in the United States and associated petroleum gas in the Middle East. Catalytic conversion to ethylene and aromatic hydrocarbons through non-oxidative dehydrogenation and dehydroaromatization of ethane (EDH and EDA) are potentially beneficial technologies because of their high selectivity to products. The former represents an attractive alternative to conventional thermal cracking of ethane. The latter can produce valuable aromatic hydrocarbons from a cheap feedstock. Nevertheless, further progress in catalytic science and technology is indispensable to implement these processes beneficially. This review summarizes progress that has been achieved with non-oxidative EDH and EDA in terms of the nature of active sites and reaction mechanisms. Briefly, platinum-, chromium- and gallium-based catalysts have been introduced mainly for EDH, including effects of carbon dioxide co-feeding. Efforts to use EDA have emphasized zinc-modified MFI zeolite catalysts. Finally, some avenues for development of catalytic science and technology for ethane conversion are summarized.

Catalytic performance and stability of Fe-doped CeO2 in propane oxidative dehydrogenation using carbon dioxide as an oxidant

Propane oxidative dehydrogenation (ODH) in the presence of CO₂ was investigated over a series of Fe-doped CeO₂ catalysts.

Ethane dehydrogenation over Cr/ZSM-5: characterization of active sites through probe molecule adsorption FTIR

Dispersed Cr species supported on zeolite ZSM-5 were investigated in the context of catalytic ethane dehydrogenation.