Solar Photocatalytic Activity of Ba-Doped ZnO Nanoparticles: The Role of Surface Hydrophilicity

Bare zinc oxide (ZnO) and Ba-doped ZnO (BZO) samples were prepared by using a simple precipitation method. The effects of Barium doping on the structural, morphological, and optoelectronic properties, as well as on the physico-chemical features of the surface were investigated and correlated with the observed photocatalytic activity under natural solar irradiation. The incorporation of Ba2+ ions into the ZnO structure increased the surface area by ca. 14 times and enhanced the hydrophilicity with respect to the bare sample, as demonstrated by infrared spectroscopy and contact angle measurements. The surface hydrophilicity was correlated with the enhanced defectivity of the doped sample, as indicated by X-ray diffraction, Raman, and fluorescence spectroscopies. The resulting higher affinity with water was, for the first time, invoked as an important factor justifying the superior photocatalytic performance of BZO compared to the undoped one, in addition to the slightly higher separation of the photoproduced pairs, an effect that has already been reported in literature. In particular, observed kinetic constants values of 8∙10-3 and 11.3∙10-3 min-1 were determined for the ZnO and BZO samples, respectively, by assuming first order kinetics. Importantly, Ba doping suppressed photocorrosion and increased the stability of the BZO sample under irradiation, making it a promising photocatalyst for the abatement of toxic species.

Insight into nanocrystal synthesis: from precursor decomposition to combustion

Nanotechnology-based synthesis of nanoscale materials has appealed to the attention of scientists in the modern scientific community. In the bottom-up approach, atoms start to aggregate/agglomerate and form nuclei within the minimum and maximum supersaturation range. Once nuclei are generated above the critical-free energy/radius, the growth is initiated by obeying the LaMar model with a slight extra simple growth by diffusion advancement. The in situ real-time liquid phase analysis using STEM, AFM, and XAS techniques is used to control precursor decomposition to the nanocrystal formation process and should be a non-stoppable technique. Solution combustion synthesis (SCS) is a time-/energy-efficient self-sustained process that produces mass-/ion transport active porous materials. SCS also permits the synthesis of evenly distributed-doped and hybrid-nanomaterials, which are beneficial in tuning crucial properties of the materials. The growth and development of nanocrystals, dehydrating the sol in the presence of a surfactant or/and fuel results in combustion once it arrives at the ignition temperature. Besides, the kinetic and thermodynamics controlled architecture-directing agent-assisted SCS offers colloidal nanocrystal framework formation, which is currently highly applicable for energy devices. This short review provides insightful information that adds to the existing nanocrystal synthesis process and solution combustion synthesis and recommends future directions in the field.

The LaMar model visualizes the process of nanocrystal formation. The solution combustion synthesis approach is a noble methodology resulting in highly stable and ordered porous nanomaterials.

MOFs Derived Hetero-ZnO/Fe2O3 Nanoflowers with Enhanced Photocatalytic Performance towards Efficient Degradation of Organic Dyes

It is still a challenge for wastewater treatment to develop efficient yet low-cost photocatalysts on a large scale. Herein, a facile yet efficient method was devised to successfully synthesize ZnO/Fe₂O₃ nanoflowers (NFs) by using metal organic framework ZIF-8 as the precursor. The photocatalytic activities of the as-prepared hetero-ZnO/Fe₂O₃ NFs are purposefully evaluated by photocatalytic degradation of methylene blue (MB) and methyl orange (MO) under UV light irradiation. The resulting ZnO/Fe₂O₃ NFs display even higher photocatalytic activities than those of single-phase ZnO and Fe₂O₃ as a photocatalyst for the degradation of both MB ad MO. Particularly, nearly 100% MB can be photocatalytically degraded in 90 min under UV light irradiation using the hetero-NFs photocatalyst. The enhanced photocatalytic properties are probably ascribed to the synergistic contributions from the suitable band alignment of ZnO and Fe₂O₃, large surface area, and strong light absorption property. Radical scavenger experiments prove that the photogenerated holes, ·OH and ·O₂-, play key roles in photocatalytic degradation process of organic dyes. Accordingly, the photocatalytic degradation mechanism of hetero-ZnO/Fe₂O₃ NFs towards dyes is tentatively proposed. The work contributes an effective way to rationally design and fabricate advanced photocatalysts with heterojunction structures for photocatalytic applications.

Synthesis of Poly(vinyl alcohol)-Aided ZnO/Mn2O3 Nanocomposites for Acid Orange-8 Dye Degradation: Mechanism and Antibacterial Activity

Zinc oxide is one of the novel metal oxides utilized for diverse applications. The sol-gel and unintended self-propagation procedures were applied to synthesize the porous and high surface area ZnO-based metal oxide nanocomposite. The p-type manganese(III) oxide was successfully coupled with n-type ZnO. The physical property characterization results revealed the surface area, porosity, and charge transfer capability improvement on the poly(vinyl alcohol) (PVA)-aided binary nanocomposite (PVA-ZnO/Mn2O3), compared to ZnO. The XRD patterns and TEM image analysis validated the nanometer size range for the materials (15-60 nm). The SEM micrographs and BET spectral details have confirmed the porous nature of the PVA-ZnO/Mn2O3 nanocomposite. The supporting results were obtained from the HRTEM (IFFT) and SAED pattern analyses. The EDX and HRTEM analyses were used for the confirmation of elemental composition and reality of the PVA-ZnO/Mn2O3 composite, respectively. The presence of the improved charge transfer property for PVA-ZnO/Mn2O3, compared to ZnO, was evidenced from acid orange-8 dye degradation. The highest zone of inhibition (14 mm) was recorded on Escherichia coli bacteria for the uncalcined PVA-ZnO/Mn2O3 nanocomposite compared to PVA, yet, less zone of inhibition compared to the calcined PVA-ZnO/Mn2O3 nanocomposite. The authors recommend the formation of the couple between metal oxides by electrochemical technique analyses as a future work.

Multifunctional application of PVA-aided Zn-Fe-Mn coupled oxide nanocomposite

Zinc oxide (ZnO) is a fascinating semiconductor material with many applications such as adsorption, photocatalysis, sensor, and antibacterial activities. By using a poly (vinyl alcohol) (PVA) polymer as a capping agent and metal oxides (iron and manganese) as a couple, the porous PVA-aided Zn/Fe/Mn ternary oxide nanocomposite material (PTMO-NCM) was synthesized. The thermal, optical, crystallinity, chemical bonding, porosity, morphological, charge transfer properties of the synthesized materials were confirmed by DTG/DSC, UV-Vis-DRS, XRD, FT-IR, BET, SEM-EDAX/TEM-HRTEM-SAED, and CV/EIS/amperometric analytical techniques, respectively. The PTMO-NCM showed an enhanced surface area and charge transfer capability, compared to ZnO. Using the XRD pattern and TEM image analysis, the crystalline size of the materials was confirmed to be in the nanometer range. The porosity and superior charge transfer capabilities of the PTMO-NCM were confirmed from the BET, HRTEM (IFFT)/SAED, and CV/EIS analysis. The adsorption kinetics (adsorption reaction/adsorption diffusion) and adsorption isotherm test confirmed the presence of a chemisorption type of adsorbate/methylene blue dye-adsorbent/PTMO-NCM interaction. The photocatalytic performance was tested on the Congo red and Acid Orange-8 dyes. The superior ascorbic acid sensing capability of the material was understood from CV and amperometric analysis. The noble antibacterial activities of the material were also confirmed on both gram-negative and gram-positive bacteria.

Thermally Sensitized Membranes for Crude Oil-Water Remediation under Visible Light

Effective remediation of produced water requires separating crude oil-water mixture and removing the dissolved organic pollutants. Membranes with selective wettability for water over oil enable the gravity-driven separation of an oil-water mixture by allowing water to permeate through while repelling oil. However, these membranes are often limited by their inability to remove the dissolved organic pollutants. In this work, a membrane with in-air superhydrophilic and underwater superoleophobic wettability is fabricated by thermal annealing of a stainless steel mesh. The resulting membrane possesses a hierarchical surface texture covered with a photocatalytic oxide layer composed of iron oxide and chromium oxide. The membrane exhibits chemical and mechanical robustness, which makes it suitable for remediation of crude oil and water mixture. Further, after being fouled by crude oil, the membrane can recover its inherent water-rich permeate flux upon visible light irradiation. Finally, the membrane demonstrates that it can separate surfactant-stabilized crude oil-in-water emulsion under gravity and decontaminate water-rich permeate by photocatalytic degradation of dissolved organic pollutants upon continuous irradiation of visible light.

Enhanced Solar Light Photocatalytic Activity of Ag Doped TiO2-Ag3PO4 Composites

Composites comprised of Ag₃PO₄ and bare TiO₂ (TiO₂@Ag₃PO₄) or silver doped TiO₂ (Ag@TiO₂–Ag₃PO₄) have been synthesized by coupling sol–gel and precipitation methods. For the sake of comparison, also the bare components have been similarly prepared. All the samples have been characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), photoelectrochemical measurements, and specific surface area (SSA) analysis. The optoelectronic and structural features of the samples have been related to their photocatalytic activity for the degradation of 4–nitrophenol under solar and UV light irradiation. Coupling Ag₃PO₄ with silver doped TiO₂ mitigates photocorrosion of the Ag₃PO₄ counterpart, and remarkably improves the photocatalytic activity under solar light irradiation with respect to the components, to the TiO₂–Ag₃PO₄ sample, and to the benchmark TiO₂ Evonik P25. These features open the route to future applications of this material in the field of environmental remediation.

The antibacterial and anticancer properties of zinc oxide coated iron oxide nanotextured composites

Core-shell α-Fe₂O₃-ZnO structures of different nanotextured morphology were synthesized through wet chemical routes using different solvents like ethanol, ethanolamine, water and acetaldehyde. Morphological tuning using different solvents resulted in the formation of different shapes, such as disc, spindle, rod and sphere (abbreviated as FZ-ND, FZ-NSP, FZ-NR and FZ-NS, respectively). Structural, morphological and compositional characterization of these nanoparticles (NPs) has been carried out. Antibacterial efficacy of the synthesized NPs was checked against Gram negative V. cholerae N16961 (VcN16961) and Gram positive S. aureus bacteria by recording optical density (OD) at different time points. Among the NPs tested, FZ-NSP was found to be the most effective against VcN16961, while FZ-NR showed maximum efficacy against S. aureus, implying the importance of nanotextured surface as well as the morphology in the manifestation of antibacterial activity. The kinetics of growth for both the bacteria has been modelled using logistic approach. Cytotoxicity was evaluated through MTT (3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazolium bromide) assay against human breast adenocarcinoma cell line (MCF-7), human hepatocarcinoma cell line (HepG2) and against normal human embryonic kidney cell line (HEK-293). The lesser toxicity of α-Fe₂O₃-ZnO towards HEK-293 and the potent anticancer activity against MCF-7 and HepG2 cells underline its applicability as anticancer agent. With continued improvement of nanotechnology, this study may pave the way for designing and construction of various morphologically diverse, nanotextured materials with desired functional attributes.

Influence of Surface-Related Phenomena on Mechanism, Selectivity, and Conversion of TiO2 -Induced Photocatalytic Reactions

Heterogeneous photocatalysis is the result of an inextricable connection of several factors differently contributing to the overall process. Photon absorption is the "sine qua non" condition for the reaction to occur. In fact, photons can be considered as immaterial reactants, and all of the phenomena related to the interaction of light-matter play a prominent role. However, other factors contribute in a concerted way to address the reaction, so that the relative contribution of each of them is often difficult to evaluate. In this framework, the present paper highlights some aspects of the interaction of TiO₂ surface-adsorbate species that could be underestimated and their influence on the conversion, selectivity, and mechanisms of photocatalytic reactions. To this aim, some paradigmatic examples on the adsorption of water and organics on TiO₂ are reported.

Improved photo-dechlorination at polar photocatalysts K3B6O10X (X = Cl, Br) by halogen atoms-modulated polarization

The material with larger distortion ability has better photocatalytic activity during the dechlorination of CPs.