3D measurement and simulation of surface acoustic wave driven fluid motion: a comparison

Analyzing the effects of helical flow in blood vessels using acoustofluidic-based dynamic flow generator

The effects of helical flow in a blood vessel are investigated in a dynamic flow generator using surface acoustic wave (SAW) in the microfluidic device. The SAW, generated by an interdigital transducer (IDT), induces acoustic streaming, resulting in a stable and consistent helical flow pattern in microscale channels. This approach allows rapid development of helical flow within the channel without directly contacting the medium. The precise design of the window enables the creation of distinct unidirectional vortices, which can be controlled by adjusting the amplitude of the SAW. Within this device, optimal operational parameters of the dynamic flow generator to preserve the integrity of endothelial cells are found, and in such settings, the actin filaments within the cells are aligned to the desired state. Our findings reveal that intracellular Ca2+ concentrations vary in response to flow conditions. Specifically, comparable maximum intensity and graphical patterns were observed between low-flow rate helical flow and high-flow rate Hagen-Poiseuille flow. These suggest that the cells respond to the helical flow through mechanosensitive ion channels. Finally, adherence of monocytes is effectively reduced under helical flow conditions in an inflammatory environment, highlighting the atheroprotective role of helical flow. STATEMENT OF SIGNIFICANCE: Helical flow in blood vessels is well known to prevent atherosclerosis. However, despite efforts to replicate helical flow in microscale channels, there is still a lack of in vitro models which can generate helical flow for analyzing its effects on the vascular system. In this study, we developed a method for generating steady and constant helical flow in microfluidic channel using acoustofluidic techniques. By utilizing this dynamic flow generator, we were able to observe the atheroprotective aspects of helical flow in vitro, including the enhancement of calcium ion flux and reduction of monocyte adhesion. This study paves the way for an in vitro model of dynamic cell culture and offers advanced investigation into helical flow in our circulatory system.

Cell-Based Micro/Nano-Robots for Biomedical Applications: A Review

Micro/nano-robots are powerful tools for biomedical applications and are applied in disease diagnosis, tumor imaging, drug delivery, and targeted therapy. Among the various types of micro-robots, cell-based micro-robots exhibit unique properties because of their different cell sources. In combination with various actuation methods, particularly externally propelled methods, cell-based microrobots have enormous potential for biomedical applications. This review introduces recent progress and applications of cell-based micro/nano-robots. Different actuation methods for micro/nano-robots are summarized, and cell-based micro-robots with different cell templates are introduced. Furthermore, the review focuses on the combination of cell-based micro/nano-robots with precise control using different external fields. Potential challenges, further prospects, and clinical translations are also discussed.

Acoustic Atomization-Induced Pumping Based on a Vibrating Sharp-Tip Capillary

Pumping is an essential component in many microfluidic applications. Developing simple, small-footprint, and flexible pumping methods is of great importance to achieve truly lab-on-a-chip systems. Here, we report a novel acoustic pump based on the atomization effect induced by a vibrating sharp-tip capillary. As the liquid is atomized by the vibrating capillary, negative pressure is generated to drive the movement of fluid without the need to fabricate special microstructures or use special channel materials. We studied the influence of the frequency, input power, internal diameter (ID) of the capillary tip, and liquid viscosity on the pumping flow rate. By adjusting the ID of the capillary from 30 µm to 80 µm and the power input from 1 V_pp to 5 V_pp, a flow rate range of 3 to 520 µL/min can be achieved. We also demonstrated the simultaneous operation of two pumps to generate parallel flow with a tunable flow rate ratio. Finally, the capability of performing complex pumping sequences was demonstrated by performing a bead-based ELISA in a 3D-printed microdevice.

Residue-free acoustofluidic manipulation of microparticles via removal of microchannel anechoic corner

Surface acoustic wave (SAW)-based acoustofluidics has shown significant promise to manipulate micro/nanoscale objects for biomedical applications, e.g. cell separation, enrichment, and sorting. A majority of the acoustofluidic devices utilize microchannels with rectangular cross-section where the acoustic waves propagate in the direction perpendicular to the sample flow. A region with weak acoustic wave intensity, termed microchannel anechoic corner (MAC), is formed inside a rectangular microchannel of the acoustofluidic devices where the ultrasonic waves refract into the fluid at the Rayleigh angle with respect to the normal to the substrate. Due to the absence of a strong acoustic field within the MAC, the microparticles flowing adjacent to the microchannel wall remain unaffected by a direct SAW-induced acoustic radiation force (ARF). Moreover, an acoustic streaming flow (ASF) vortex produced within the MAC pulls the particles further into the corner and away from the direct ARF influence. Therefore, a residue of particles continues to flow past the SAWs without intended deflection, causing a decrease in microparticle manipulation efficiency. In this work, we introduce a cross-type acoustofluidic device composed of a half-circular microchannel, fabricated through a thermal reflow of a positive photoresist mold, to overcome the limitations associated with rectangular microchannels, prone to the MAC formation. We investigated the effects of different microchannel cross-sectional shapes with varying contact angles on the microparticle deflection in a continuous flow and found three distinct regimes of particle deflection. By systematically removing the MAC out of the microchannel cross-section, we achieved residue-free acoustofluidic microparticle manipulation via SAW-induced ARF inside a half-circular microchannel. The proposed method was applied to efficient fluorescent coating of the microparticles in a size-selective manner without any residue particles left undeflected in the MAC.

Three-dimensional heating and patterning dynamics of particles in microscale acoustic tweezers

Acoustic tweezers facilitate a noninvasive, contactless, and label-free method for the precise manipulation of micro objects, including biological cells. Although cells are exposed to mechanical and thermal stress, acoustic tweezers are usually considered as biocompatible. Here, we present a holistic experimental approach to reveal the correlation between acoustic fields, acoustophoretic motion and heating effects of particles induced by an acoustic tweezer setup. The system is based on surface acoustic waves and was characterized by applying laser Doppler vibrometry, astigmatism particle tracking velocimetry and luminescence lifetime imaging. In situ measurements with high spatial and temporal resolution reveal a three-dimensional particle patterning coinciding with the experimentally assisted numerical result of the acoustic radiation force distribution. In addition, a considerable and rapid heating up to 55 °C depending on specific parameters was observed. Although these temperatures may be harmful to living cells, counter-measures can be found as the time scales of patterning and heating are shown to be different.

Acoustofluidic Stimulation of Functional Immune Cells in a Microreactor

The cytotoxic response of natural killer (NK) cells in a microreactor to surface acoustic waves (SAWs) is investigated, where the SAWs produce an acoustic streaming flow. The Rayleigh-type SAWs form by an interdigital transducer propagated along the surface of a piezoelectric substrate in order to allow the dynamic stimulation of functional immune cells in a noncontact and rotor-free manner. The developed acoustofluidic microreactor enables a dynamic cell culture to be set up in a miniaturized system while maintaining the performance of agitating media. The present SAW system creates acoustic streaming flow in the cylindrical microreactor and applies flow-induced shear stress to the cells. The suspended NK cells are found to not be damaged by the SAW operation of the adjusted experimental setup. Suspended NK cell aggregates subjected to an SAW treatment show increased intracellular Ca2+ concentrations. Simultaneously treating the NK cells with SAWs and protein kinase C activator enhances the lysosomal protein expressions of the cells and the cell-mediated cytotoxicity against target tumor cells. These have important implications by showing that acoustically actuated system allows dynamic cell culture without cell damages and further alters cytotoxicity-related cellular activities.

On the acoustically induced fluid flow in particle separation systems employing standing surface acoustic waves - Part I

By integrating surface acoustic waves (SAW) into microfluidic devices, microparticle systems can be fractionated precisely in flexible and easily scalable Lab-on-a-Chip platforms. The widely adopted driving mechanism behind this principle is the acoustic radiation force, which depends on the size and acoustic properties of the suspended particles. Superimposed fluid motion caused by the acoustic streaming effect can further manipulate particle trajectories and might have a negative influence on the fractionation result. A characterization of the crucial parameters that affect the pattern and scaling of the acoustically induced flow is thus essential for the design of acoustofluidic separation systems. For the first time, the fluid flow induced by pseudo-standing acoustic wave fields with a wavelength much smaller than the width of the confined microchannel is experimentally revealed in detail, using quantitative three-dimensional measurements of all three velocity components (3D3C). In Part I of this study, we focus on the fluid flow close to the center of the surface acoustic wave field, while in Part II the outer regions with strong acoustic gradients are investigated. By systematic variations of the SAW-wavelength λ_SAW and channel height H, a transition from vortex pairs extending over the entire channel width W to periodic flows resembling the pseudo-standing wave field is revealed. An adaptation of the electrical power, however, only affects the velocity scaling. Based on the experimental data, a validated numerical model was developed in which critical material parameters and boundary conditions were systematically adjusted. Considering a Navier slip length at the substrate-fluid interface, the simulations provide a strong agreement with the measured velocity data over a large frequency range and enable an energetic consideration of the first and second-order fields. Based on the results of this study, critical parameters were identified for the particle size as well as for channel height and width. Progress for the research on SAW-based separation systems is obtained not only by these findings but also by providing all experimental velocity data to allow for further developments on other sites.

On the acoustically induced fluid flow in particle separation systems employing standing surface acoustic waves - Part II

Particle separation using surface acoustic waves (SAWs) has been a focus of ongoing research for several years, leading to promising technologies based on Lab-on-a-Chip devices. In many of them, scattering effects of acoustic waves on suspended particles are utilized to manipulate their motion by means of the acoustic radiation force (F_ARF). Due to viscous damping of radiated waves within a fluid, known as the acoustic streaming effect, a superimposed fluid flow is generated, which additionally affects the trajectories of the particles by drag forces. To evaluate the influence of this acoustically induced flow on the fractionation of suspended particles, the present study gives a deep insight into the pattern and scaling of the resulting vortex structures by quantitative three-dimensional, three component (3D3C) velocity measurements. Following the analysis of translationally invariant structures at the center of a pseudo-standing surface acoustic wave (sSAW) in Part I, the focus in Part II turns to the outer regions of acoustic actuation. The impact of key parameters on the formation of the outer vortices, such as the wavelength of the SAW λ_SAW, the channel height H and electrical power P_el, is investigated with respect to the design of corresponding separation systems. As a result of large gradients in the acoustic fields, broadly extended vortices are formed, which can cause a lateral displacement of particles and are thus essential for a holistic analysis of the flow phenomena. The interaction with an externally imposed main flow reveals local recirculation regions, while the extent of the vortices is quantified based on the displacement of the main flow.

Periodic Rayleigh streaming vortices and Eckart flow arising from traveling-wave-based diffractive acoustic fields

Recent studies have demonstrated that periodic time-averaged acoustic fields can be produced from traveling surface acoustic waves (SAWs) in microfluidic devices. This is caused by diffractive effects arising from a spatially limited transducer. This permits the generation of acoustic patterns evocative of those produced from standing waves, but instead with the application of a traveling wave. While acoustic pressure fields in such systems have been investigated, acoustic streaming from diffractive fields has not. In this work we examine this phenomenon and demonstrate the appearance of geometry-dependent acoustic vortices, and demonstrate that periodic, identically rotating Rayleigh streaming vortices result from the imposition of a traveling SAW. This is also characterized by a channel-spanning flow that bridges between adjacent vortices along the channel top and bottom. We find that the channel dimensions determine the types of streaming that develops; while Eckart streaming has been previously presumed to be a distinguishing feature of traveling-wave actuation, we show that Rayleigh streaming vortices also results. This has implications for microfluidic actuation, where traveling acoustic waves have applications in microscale mixing, separation, and patterning.

Deterministic Sorting of Submicrometer Particles and Extracellular Vesicles Using a Combined Electric and Acoustic Field

Sorting of extracellular vesicles has important applications in early stage diagnostics. Current exosome isolation techniques, however, suffer from being costly, having long processing times, and producing low purities. Recent work has shown that active sorting via acoustic and electric fields are useful techniques for microscale separation activities, where combining these has the potential to take advantage of multiple force mechanisms simultaneously. In this work, we demonstrate an approach using both electrical and acoustic forces to manipulate bioparticles and submicrometer particles for deterministic sorting, where we find that the concurrent application of dielectrophoretic (DEP) and acoustophoretic forces decreases the critical diameter at which particles can be separated. We subsequently utilize this approach to sort subpopulations of extracellular vesicles, specifically exosomes (<200 nm) and microvesicles (>300 nm). Using our combined acoustic/electric approach, we demonstrate exosome purification with more than 95% purity and 81% recovery, well above comparable approaches.

Quantitative assessment of parallel acoustofluidic device

The advantage of ultrasonic fields in harmless and label-free applications intrigued researchers to develop this technology. The capability of acoustofluidic technology for medical applications has not been thoroughly analyzed and visualized. Toward efficient design, in this research, flowing fluid in a microchannel excited by acoustic waves is fully investigated. To study the behavior of acoustic streaming, the main interfering parameters such as inlet velocity, working frequency, displacement amplitude, fluid buffer material, and hybrid effect in a rectangular water-filled microchannel actuated by standing surface acoustic waves are studied. Governing equations for acoustic field and laminar flow are derived employing perturbation theory. For each set of equations, appropriate boundary conditions are applied. Results demonstrate a parallel device is capable of increasing the inlet flow for rapid operations. Frequency increment raises the acoustic streaming velocity magnitude. Displacement amplitude amplification increases the acoustic streaming velocity and helps the streaming flow dominate over the incoming flow. The qualitative analysis of the hybrid effect shows using hard walls can significantly increase the streaming power without depleting excessive energy. A combination of several effective parameters provides an energy-efficient and fully controllable device for biomedical applications such as fluid mixing and cell lysis.

Acoustic streaming of microparticles using graphene-based interdigital transducers

Surface acoustic wave (SAW) devices offer many benefits in chemistry and biomedicine, enabling precise manipulation of micro-droplets, mixing of liquids by acoustic streaming and pumping of liquids in enclosed channels, while presenting a cost-effective and easy fabrication and integration with electronic devices. In this work, we present microfluidic devices which use graphene-based interdigital transducers (IDTs) to generate SAWs with a frequency of 100 MHz and an amplitude of up to 200 pm, which allow us to manipulate microparticle solutions by acoustic streaming. Due to the negligible mass loading of the piezoelectric surface by graphene, the SAWs generated by these devices have no frequency shift, typically observed when metal IDTs are used.

Manipulation of self-assembled three-dimensional architecture in reusable acoustofluidic device

Reconstructing of cell architecture plays a vital role in tissue engineering. Recent developments of self-assembling of cells into three-dimensional (3D) matrix pattern using surface acoustic waves have paved a way for a better tissue engineering platform thanks to its unique properties such as nature of noninvasive and noncontact, high biocompatibility, low-power consumption, automation capability, and fast actuation. This article discloses a method to manipulate the orientation and curvature of 3D matrix pattern by redesigning the top wall of microfluidic chamber and the technique to create a 3D longitudinal pattern along preinserted polydimethylsiloxane (PDMS) rods. Experimental results showed a good agreement with model predictions. This research can actively contribute to the development of better organs-on-chips platforms with capability of controlling cell architecture and density. Meanwhile, the 3D longitudinal pattern is suitable for self-assembling of microvasculatures.

Comparison of Acoustic Streaming Flow Patterns Induced by Solid, Liquid and Gas Obstructions

In this study, acoustic streaming flows inside micro-channels induced by three different types of obstruction—gaseous bubble, liquid droplet and solid bulge—are compared and investigated experimentally by particle tracking velocimetry (PTV) and numerically using the finite element method (FEM). The micro-channels are made by poly(dimethylsiloxane) (PDMS) using soft lithography with low-cost micro-machined mold. The characteristic dimensions of the media are 0.2 mm in diameter, and the oscillation generated by piezoelectric actuators has frequency of 12 kHz and input voltages of 40 V. The experimental results show that in all three obstruction types, a pair of counter-rotating vortical patterns were observed around the semi-circular obstructions. The gaseous bubble creates the strongest vortical streaming flow, which can reach a maximum of 21 mm/s, and the largest u component happens at Y/D = 0. The solid case is the weakest of the three, which can only reach 2 mm/s. The liquid droplet has the largest v components and speed at Y/D = 0.5 and Y/D = 0.6. Because of the higher density and incompressibility of liquid droplet compared to the gaseous bubble, the liquid droplet obstruction transfers the oscillation of the piezo plate most efficiently, and the induced streaming flow region and average speed are both the largest of the three. An investigation using numerical simulation shows that the differing interfacial conditions between the varying types of obstruction boundaries to the fluid may be the key factor to these differences. These results suggest that it might be more energy-efficient to design an acoustofluidic device using a liquid droplet obstruction to induce the stronger streaming flow.

Experimental and numerical investigations of mechanical displacements in surface acoustic wave bounded beams

The present paper studies experimentally and numerically the surface acoustic wave (SAW) field on a piezoelectric substrate generated by interdigital transducers (IDT). On the one hand, mechanical displacements produced by the SAW are measured with the help of a laser Doppler vibrometer. On the other hand, mechanical displacements are computed by the two-dimensional finite element method in frequency domain followed by the spatial Fourier transform. Combining these two steps of computations results in the intended two-dimensional distribution of mechanical displacements on the substrate surface. The comparison of experimental and numerical data obtained for a series of different IDTs reveals that it is possible to estimate the shape of the SAW beam and the absolute value of mechanical displacement amplitude using only the basic parameters of the IDT and its electrical admittance measured by a network analyzer.

The complexity of surface acoustic wave fields used for microfluidic applications

Using surface acoustic waves (SAW) for the agitation and manipulation of fluids and immersed particles or cells in lab-on-a-chip systems has been state of the art for several years. Basic tasks comprise fluid mixing, atomization of liquids as well as sorting and separation (or trapping) of particles and cells, e.g. in so-called acoustic tweezers. Even though the fundamental principles governing SAW excitation and propagation on anisotropic, piezoelectric substrates are well-investigated, the complexity of wave field effects including SAW diffraction, refraction and interference cannot be comprehensively simulated at this point of time with sufficient accuracy. However, the design of microfluidic actuators relies on a profound knowledge of SAW propagation, including superposition of multiple SAWs, to achieve the predestined functionality of the devices. Here, we present extensive experimental results of high-resolution analysis of the lateral distribution of the complex displacement amplitude, i.e. the wave field, alongside with the electrical S-parameters of the generating transducers. These measurements were carried out and are compared in setups utilizing travelling SAW (tSAW) excited by single interdigital transducer (IDT), standing SAW generated between two IDTs (1DsSAW, 1D acoustic tweezers) and between two pairs of IDTs (2DsSAW, 2D acoustic tweezers) with different angular alignment in respect to pure Rayleigh mode propagation directions and other practically relevant orientations. For these basic configurations, typically used to drive SAW-based microfluidics, the influence of common SAW phenomena including beam steering, coupling coefficient dispersion and diffraction on the resultant wave field is investigated. The results show how tailoring of the acoustic conditions, based on profound knowledge of the physical effects, can be achieved to finally realize a desired behavior of a SAW-based microacoustic-fluidic system.

A deep learning approach for designed diffraction-based acoustic patterning in microchannels

Acoustic waves can be used to accurately position cells and particles and are appropriate for this activity owing to their biocompatibility and ability to generate microscale force gradients. Such fields, however, typically take the form of only periodic one or two-dimensional grids, limiting the scope of patterning activities that can be performed. Recent work has demonstrated that the interaction between microfluidic channel walls and travelling surface acoustic waves can generate spatially variable acoustic fields, opening the possibility that the channel geometry can be used to control the pressure field that develops. In this work we utilize this approach to create novel acoustic fields. Designing the channel that results in a desired acoustic field, however, is a non-trivial task. To rapidly generate designed acoustic fields from microchannel elements we utilize a deep learning approach based on a deep neural network (DNN) that is trained on images of pre-solved acoustic fields. We use then this trained DNN to create novel microchannel architectures for designed microparticle patterning.

Acoustic fields and microfluidic patterning around embedded micro-structures subject to surface acoustic waves

Recent research has shown that interactions between acoustic waves and microfluidic channels can generate microscale interference patterns with the application of a traveling surface acoustic wave (SAW), effectively creating standing wave patterns with a traveling wave. Forces arising from this interference can be utilized for precise manipulation of micron-sized particles and biological cells. The patterns that have been produced with this method, however, have been limited to straight lines and grids from flat channel walls, and where the spacing resulting from this interference has not previously been comprehensively explored. In this work we examine the interaction between both straight and curved channel interfaces with a SAW to derive geometrically deduced analytical models. These models predict the acoustic force-field periodicity near a channel interface as a function of its orientation to an underlying SAW, and are validated with experimental and simulation results. Notably, the spacing is larger for flat walls than for curved ones and is dependent on the ratio of sound speeds in the substrate and fluid. Generating these force-field gradients with only travelling waves has wide applications in acoustofluidic systems, where channel interfaces can potentially support a range of patterning, concentration, focusing and separation activities by creating locally defined acoustic forces.

Modelling of SAW-PDMS acoustofluidics: physical fields and particle motions influenced by different descriptions of the PDMS domain

In modelling acoustofluidic chips actuated by surface acoustic waves (SAWs) and using polydimethylsilane (PDMS) as a channel material, reduced models are often adopted to describe the acoustic behaviors of PDMS. Here, based on a standing SAW (SSAW) acoustophoresis chip, we compared three different descriptions of a PDMS chamber and looked into in-chamber physical fields and ensuing particle motion processes through finite element (FE) simulations. Specifically, the PDMS domain was considered as an elastic solid material, a non-flow fluid, and a lossy wall, respectively. The major findings include: (a) the shear waves that propagated in a solid PDMS wall did not influence the in-chamber pressure and ARF fields severely, but induced an observable difference in the acoustic streaming (AS) patterns, and distinctly changed the trajectories of polystyrene particles, especially those whose radii were below 1.5 μm; and (b) the equivalent damping coefficients were linearly dependent on the SAW frequency, characterized by a fixed loss per wavelength, indicating the wave leakage at the interface being the main source of the transmission loss of SAWs. Meanwhile, the acoustic radiation force (ARF) can be overestimated when describing PDMS as a lossy wall, especially at the bottom corners of the chamber, which could cause inaccurate predictions of the motion of big particles. Based on the damping mechanism, a rough protocol is provided for scaling of pressure fields between different models. Some suggestions for device designs and operations are also given based on the obtained findings.

Three-dimensional numerical simulation and experimental investigation of boundary-driven streaming in surface acoustic wave microfluidics

Acoustic streaming has been widely used in microfluidics to manipulate various micro-/nano-objects. In this work, acoustic streaming activated by interdigital transducers (IDT) immersed in highly viscous oil is studied numerically and experimentally. In particular, we developed a modeling strategy termed the "slip velocity method" that enables a 3D simulation of surface acoustic wave microfluidics in a large domain (4 × 4 × 2 mm3) and at a high frequency (23.9 MHz). The experimental and numerical results both show that on top of the oil, all the acoustic streamlines converge at two horizontal stagnation points above the two symmetric sides of the IDT. At these two stagnation points, water droplets floating on the oil can be trapped. Based on these characteristics of the acoustic streaming field, we designed a surface acoustic wave microfluidic device with an integrated IDT array fabricated on a 128°YX LiNbO3 substrate to perform programmable, contactless droplet manipulation. By activating IDTs accordingly, the water droplets on the oil can be moved to the corresponding traps. With its excellent capability for manipulating droplets in a highly programmable, controllable manner, our surface acoustic wave microfluidic devices are valuable for on-chip contactless sample handling and chemical reactions.

Surface acoustic wave diffraction driven mechanisms in microfluidic systems

Acoustic forces arising from high-frequency surface acoustic waves (SAW) underpin an exciting range of promising techniques for non-contact manipulation of fluid and objects at micron scale. Despite increasing significance of SAW-driven technologies in microfluidics, the understanding of a broad range of phenomena occurring within an individual SAW system is limited. Acoustic effects including streaming and radiation force fields are often assumed to result from wave propagation in a simple planar fashion. The propagation patterns of a single SAW emanating from a finite-width source, however, cause a far richer range of physical effects. In this work, we seek a better understanding of the various effects arising from the incidence of a finite-width SAW beam propagating into a quiescent fluid. Through numerical and experimental verification, we present five distinct mechanisms within an individual system. These cause fluid swirling in two orthogonal planes, and particle trapping in two directions, as well as migration of particles in the direction of wave propagation. For a range of IDT aperture and channel dimensions, the relative importance of these mechanisms is evaluated.

Microfluidic flow switching via localized acoustic streaming controlled by surface acoustic waves

Acoustic streaming flow induced by high-frequency surface acoustic waves has been used to switch streams of two immiscible fluids flowing in parallel through a bifurcating microchannel with an H-shaped junction at the centre.

Fluorescence activated cell sorting via a focused traveling surface acoustic beam

Fluorescence activated cell sorting (FACS) has become an essential technique widely exploited in biological studies and clinical applications. However, current FACS systems are quite complex, expensive, bulky, and pose potential sample contamination and biosafety issues due to the generation of aerosols in an open environment. Microfluidic technology capable of precise cell manipulation has great potential to reinvent and miniaturize conventional FACS systems. In this work, we demonstrate a benchtop scale FACS system that makes use of a highly focused traveling surface acoustic wave beam to sort out micron-sized particles and biological cells upon fluorescence interrogation at ∼kHz rates. The highly focused acoustic wave beam has a width of ∼50 μm that enables highly accurate sorting of individual particles and cells. We have applied our acoustic FACS system to isolate fluorescently labeled MCF-7 breast cancer cells from diluted whole blood samples with the purity of sorted MCF-7 cells higher than 86%. The cell viability before and after acoustic sorting is higher than 95%, indicating excellent biocompatibility that should enable a variety of cell sorting applications in biomedical research.