Facile synthesis of double-cross-linked alginate-based hydrogel: Characterization and use in a context of circular economy for cationic dye removal

Hydrogels based on natural polysaccharides have received special attention in the last decade due to their interesting features, such as availability, biocompatibility, biodegradability and safety. Such characteristics may make them sustainable and eco-friendly materials for water and wastewater treatment, meeting the concept of circular economy. In this study, a novel double-cross-linked alginate-based hydrogel has been successfully synthesized using epichlorhydrin and sodium trimetaphosphate (STMP) as cross-linker agents and then used for the removal of methylene blue (MB) dye under different operating conditions. The obtained hydrogel was deeply characterized by using various analytical techniques, namely Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and differential scanning calorimetry. Experimental results showed that the synthesized double cross-linked hydrogel with relatively high STMP concentration (0.26 M) has promising structural and textural properties. This material exhibited excellent removal ability towards MB with a maximum adsorption capacity of about 992 mg/g for an initial pH of 10. The kinetic and isotherm modeling study revealed that the pseudo-second-order and Freundlich models fitted well the measured adsorption experimental data. The MB adsorption process onto the synthesized hydrogel is exothermic, feasible and spontaneous. It mainly includes electrostatic interaction and hydrogen bonds. These findings suggest that double-cross-linked alginate-based hydrogel can be considered as an attractive and potential adsorbent for an effective cationic dye removal from aqueous environments. The use of such a green adsorbent for the treatment of organic-pollutants-rich industrial wastewaters promotes sustainability and circular economy concepts.

Performance evaluation of facile synthesized CA-PVA-GO composite for the mitigation of Cr(Ⅲ) and C.I. acid violet 54 dye from tannery wastewater

Untreated tannery wastewater contains a large amount of toxic metals, dyes, and other pollutants, which pose adverse effects on the ecosystem and public health. In this work, a calcium alginate-poly vinyl alcohol-graphene oxide (CA-PVA-GO) composite was prepared to remove metals and dyes, particularly Cr(Ⅲ) and CI acid violet 54 (AV54) dye, from tannery wastewater. FESEM, FTIR, and XRD analyses were applied to characterize the GO and CA-PVA-GO. Different operational variables, viz. pH (3.0-5.5 for Cr(III) and 2-7 for dye), dosage (0.164-2.46 g/L), contact time (10-60 min), initial concentration (39, 65, 98, and 201 ppm for Cr(III) and 21.5, 38.5, 54.5, and 61.75 ppm for dye), and temperature (298, 308, 318, and 328 K) were studied to evaluate the efficiency of the CA-PVA-GO composite. The optimum conditions for Cr(Ⅲ) and AV54 dye adsorption were found to be pH (5.0 and 3.0), dosage (0.82 g/L for both), and time (45 and 60 min), respectively, with 35.35 ± 1.43% and 84.63 ± 2.54% removal efficiency. The experimental data was analyzed through the Langmuir and Freundlich isotherms. The maximum adsorption capacity (qm) was observed at 173.01 and 74.68 mg/g for Cr(Ⅲ) and AV54 dye, respectively. The pseudo-second-order kinetic model was fitted better (R2 = 0.981, 0.995, 0.92, and 0.995) than first-order for AV54 dye adsorption. Thermodynamic analyses revealed that the Cr(Ⅲ) and AV54 dye adsorption processes were spontaneous and exothermic. The value of Gibbs free energy (ΔG) for Cr(III) adsorption was obtained at -7.433, -4.508, -2.626, and -1.311 kJ/mol, whereas it was -5.178, -4.867, -4.628, and -4.555 kJ/mol for dye. The values of ΔH and ΔS were -67.257 and -0.198 kJ/mol for Cr(III) and -10.852 and -0.019 kJ/mol for the dye removal. The regenerated CA-PVA-GO composite was reused successfully. Different physicochemical parameters, viz., concentration, pH, TDS, EC, BOD5, and COD of chrome tanning and dyeing effluents, were analyzed before and after the adsorption. The results of chromium and dye removal from tannery wastewater were 53.18% and 93.91%, revealing that the developed eco-friendly CA-PVA-GO composite could be an operative adsorbent for tannery wastewater treatment and possibly scaled up to an industrial level.

Hierarchical Porous Aerogels With Multiple Adsorptive Interactions for Dye Wastewater Purification

Aerogels present a huge potential for removing organic dyes from printing and dyeing wastewater (PDW). However, the preparation of aerogels with multiple dye adsorption capabilities remains a challenge, as many existing aerogels are limited to adsorbing only a single type of dye. Herein, a composite aerogel (CG/T-rGO) with the addition of carboxymethyl chitosan, gelatin and tannic acid reduced graphene oxide (T-rGO) was synthesized by freeze-drying technology. The electrostatic interactions between dye molecular and GEL/CMCS (CG) networks, as well as the supramolecular interactions (H-bonds, electrostatic interactions and π-π stacks) between T-rGO, have endowed the aerogel with the ability to adsorb multiple types of dye, such as methylene blue (MB) and methyl orange (MO). Results exhibited that the prepared CG/T-rGO aerogel possessed strong mechanical strength and a porous 3D network structure with a porosity of 96.33 %. Using MB and MO as adsorbates, the adsorption capacity (88.2 mg/g and 66.6 mg/g, respectively) and the mechanism of the CG/T-rGO aerogel were investigated. The adsorption processes of aerogel for MB and MO were shown to follow the pseudo-second-order kinetic model and Langmuir isotherm model, indicating the chemical adsorption of a monolayer. The proposed aerogel in this work has promising prospects for dye removal from PDW.

Facile Synthesis of MOFs-Templated Carbon Aerogels with Enhanced Tetracycline Adsorption Performance

Three-dimensional aerogels have great potential for antibiotic removal from aqueous solution due to their excellent solution mass transfer channels and special morphology. Herein, the metal ions were bound with alginate to form alginate-Fe, alginate-Cu, and alginate-Fe-Cu hydrogels, then they were used as nucleation sites for metal organic framework (MOF) growth to obtain MAlgs gels, respectively. Considering the aqueous environmental stability of MOFs particles, the alginate and MOF particles in MAlgs aerogels were pyrolyzed as templates to obtain the derived carbon aerogel CMAlgs. The results showed that the adsorption capacity of MAlgs-Fe-Cu aerogel was higher than that of MAlg-Cu and MAlg-Fe aerogels, up to ~130 mg·g−1. The adsorption performance of carbon aerogel CMAlg-Cu decreased obviously because of the decrease of pore size and oxygen-containing functional groups. The adsorption process is a combination of physical adsorption and chemical adsorption. In addition, CMAlgs aerogels exhibit better recyclability than MAlgs aerogels. This work provides a new strategy for fabricating MOFs-templated in-situ grown carbon aerogels for water purification.

Adsorptive seawater desalination using MOF-incorporated Cu-alginate/PVA beads: Ion removal efficiency and durability

With the worsening water scarcity problem, seawater desalination has been receiving gradually increasing attention. Ion adsorptive desalination was introduced as one of the seawater desalination techniques. In our previous study, metal-organic framework (MOF)-incorporated single-network alginate (MOF-Alg(Cu)) beads were used to adsorb ions in seawater. In the present study, MOF-incorporated Cu-based alginate/PVA hydrogel (MOF-Alg(Cu)/PVA) beads were fabricated to enhance the ion adsorption desalination technique. Cu-based MOFs were successfully synthesized in situ on an interpenetrating polymer network (IPN). Given that the IPN hydrogel beads have high stability, the amount of MOF particles extracted during the adsorption of ions is reduced. The fabricated MOF-Alg(Cu)/PVA beads exhibit efficient removal of dissolved ions in artificial seawater and NaCl solution with varied concentrations. The ion adsorption characteristics were evaluated on the basis of adsorption kinetics, adsorption isotherms, and dosage of adsorbent. The repeat cycle tests show that more than half of the ion removal efficiency was maintained after 10 cycle tests. The concentration of artificial seawater was reduced to 1500 ppm by employing MOF-Alg(Cu)/PVA beads through a multistage experiment. Compared with other seawater desalination techniques, the proposed adsorptive desalination technique using MOF-Alg(Cu)/PVA beads will pave the way for developing a new ecofriendly and energy-saving approach.

Hydroxypropyl cellulose enhanced ionic conductive double-network hydrogels

Ionic conductive hydrogels with both high-performance in conductivity and mechanical properties have received increasing attention due to their unique potential in artificial soft electronics. Here, a dual physically cross-linked double network (DN) hydrogel with high ionic conductivity and tensile strength was fabricated by a facile approach. Hydroxypropyl cellulose (HPC) biopolymer fibers were embedded in a poly (vinyl alcohol)‑sodium alginate (PVA/SA) hydrogel, and then the prestretched PVA-HPC/SA composite hydrogel was immersed in a CaCl₂ solution to prepare PVA-HPC_T/SA-Ca DN hydrogels. The obtained composite hydrogel has an excellent tensile strength up to 1.4 MPa. Importantly, the synergistic effect of hydroxypropyl cellulose (HPC) and prestretching reduces the migration resistance of ions in the hydrogel, and the conductivity reaches 3.49 S/ m. In addition, these composite hydrogels are noncytotoxic, and they have a low friction coefficient and an excellent wear resistance. Therefore, PVA-HPC_T/SA-Ca DN hydrogels have potential applications in nerve replacement materials and biosensors.

Tetracycline removal by double-metal-crosslinked alginate/graphene hydrogels through an enhanced Fenton reaction

Polymer hydrogel usually has limited catalytic activity and stability in Fenton catalysis. Here, we presented for the first time the preparation of a novel double-metal-crosslinked alginate hydrogel using graphene oxide to facilitate the Fe(II)/Fe(III) redox cycles. Five multivalent metal cations were used as crosslinkers to prepare different alginate-GO-M (Fe(III), Fe(II), La(III), Ce(III), and Co(II)), and the effects of assisted metal cations (La(III), Ce(III), and Co(II)) on different Fe(II) bimetallic alginate-GO-Fe-M(AG-Fe-M) complexes were investigated. Double-metal-crosslinked alginate-GO hydrogels can degrade tetracycline much faster during the initial 10 min than single-metal-crosslinked hydrogels. In addition, the release of iron from AG-Fe-Ce (10.59 ppm) was less than that from AG-Fe-Co (21.57 ppm) and AG-Fe-La (25.6 ppm) during the Fenton reaction. More importantly, the AG-Fe-Ce did not release TOC and maintained most of the catalytic activity after four reuse cycles, confirmed its excellent stability. For the treatment of raw water containing a high proportion of proteinaceous matter and tetracycline, the AG-Fe-Ce significantly reduced the molecular weight of the dissolved organic matter. We deduced that the humic acid and protein show good complexation ability to tetracycline, thereby reduced its bioavailability. This study provides new insights into the synthesis of polymer catalysts for water treatment.

Effects of surfactant and ionic concentration on properties of dual physical crosslinking self-healing hydrogels by hydrophobic association and ionic interactions

Two kinds of dual crosslinking hydrogels have adjustable mechanical properties, self-healing and self-recovery performances.

Polymer hydrogels with enhanced stability and heterogeneous Fenton activity in organic pollutant removal

Polymer hydrogel-based materials have been shown to act as novel Fenton catalysts for water treatment, but the rational design of hydrogel-based catalysts with good stability has been a great challenge. To increase the stability and activity of polymer-based Fenton catalysts, uniform urchin-like α-Fe₂O₃ was grown in situ in a PVA carrier matrix here. PVA molecules promoted the growth of urchin-like α-Fe₂O₃, and then the PVA hydrogel acted as a barrier and carrier to reduce agglomeration. Through coordination by hydroxyl groups, PVA had good combination with Fe ions and α-Fe₂O₃. The formation of Fe-O-C bonds between iron oxides and polymers was reported for the first time, enhancing the material stability during catalysis. Under higher PVA concentrations, the resulting composite hydrogel could generate more ˙OH due to the increase in the number of active sites because of the hairy urchin-like structure. In tetracycline degradation through a heterogeneous Fenton reaction, the resulting material had good catalytic activity from pH 2 to pH 10 with low iron leaching, good reusability and remained at a level of nearly 90% after five consecutive cycles. Density functional theory calculations were used to further prove the mechanism of structural change of the iron oxides. The HOMO and LUMO energies of the iron oxides changed from 5.428 and 4.899 eV to 5.926 and 5.310 eV, indicating that the presence of PVA could influence the charge of the iron atom. The results provide new insights into the preparation of polymer hydrogel-based heterogeneous Fenton catalysts with enhanced stability for water treatment.

Dye removal by eco-friendly physically cross-linked double network polymer hydrogel beads and their functionalized composites

Hydrogels have attracted large attention in wastewater treatment fields due to their low-cost and good interaction with pollutants, among which novel double network hydrogel is an outstanding class. To expand the application of double network hydrogel in water treatment, in this study, eco-friendly physically cross-linked double network polymer hydrogel beads (DAP) are prepared and studied in depth on the mechanism of Methylene Blue (MB) adsorption; and then the polymer hydrogels are further functionalized by inorganic materials. MB adsorption on DAP favors alkaline condition which is due to the increase of electrostatic attraction and adsorption site, and it reaches equilibrium within 10 hr, which is faster than that of the single network hydrogel beads (SAP). Through thermodynamics study, the process shows to be an exothermic and spontaneous process. The adsorption isotherms are well fitted by Langmuir model, with a maximum monolayer adsorption capacity of 1437.48 mg/g, which is larger than SAP (1255.75 mg/g). After being functionalized with common inorganic materials including activated carbon, Fe₃O₄ and graphene oxide (GO), the composites show to have larger pore sizes and have obvious increases in adsorption capacity especially the one contains GO. Then the composites contains Fe₃O₄ are used as heterogeneous Fenton catalyst which shows to have excellent performance in MB degradation. The results indicate the potential of polymer double network to be functionalized in environmental areas.

Self-healing and tough GO-supported hydrogels preparedviasurface-initiated ATRP and photocatalytic modification

Hydrogels with the properties of self-healing, toughness, stiffness and strength have great potential for use in smart materials.

Novel one step preparation of a 3D alginate based MOF hydrogel for water treatment

We propose a novel one-step method for the preparation of a novel 3D alginate based MOF hydrogel and use it for tetracycline removal.

Dynamically crosslinked carbon dots/biopolymer hydrogels exhibiting fluorescence and multi-stimuli logic-gate responses

Herein, nanocomposite hydrogels are constructed for detection of multiple external stimuli by the naked-eye.