Comparison of Structural, Water-Retaining and Sorption Properties of Acrylamide-Based Hydrogels Cross-Linked by Physical and Chemical Methods

Two series of hydrogels based on acrylamide and its copolymers with acrylonitrile and acrylic acid were synthesized by two cross-linking methods - chemical (using N,N'-methylene bis-acrylamide) and physical (using montmorillonite (MMT)) ones. The structure of the gels was characterized by Fourier Transform Infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The swelling and sorption properties were analyzed as a function of both the monomer composition and the cross-linking method. The shift of the band corresponding to Si-O (995-1030 cm-1 ) confirmed the formation of intercalation structures for MMT-cross-linked gels. Moreover, physically cross-linked gels demonstrated a non-monotonic dependence of the swelling degree on the MMT concentration, and acrylamide-acrylic acid copolymer MMT-cross-linked gels showed pH sensitivity and the highest swelling degree of 150 g/g. The highest sorption capacity towards cadmium(II) ions was demonstrated by acrylamide-acrylic acid copolymer gels, both covalently cross-linked (30 mg/g) and MMT-cross-linked (8.9 mg/g).

Valorizing industrial tobacco wastes within natural clays and chitosan nanocomposites for an ecofriendly insecticide

We report the engineering of insecticide films based on two mineral clays, montmorillonite and kaolinite, combined to chitosan and/or cellulose acetate originating from cigarette filter and subsequently impregnated with tobacco essential oil extracted from tobacco dust. Both binary composites, i.e. clay and chitosan or clay and cellulose acetate, and ternary composites containing clay, chitosan and cellulose acetate were prepared and characterized by XRD, DLS, ELS, and IR to investigate the nature of interactions within the composites. The two clay minerals showed different kinds of interaction with chitosan: intercalation in the case of Montmorillonite vs adsorption on the external surface for kaolinite. Secondly, the nicotine release from the composites films at different temperatures was studied by in-situ IR. The Montmorillonite composites, particularly the ternary one, showed a better encapsulation of nicotine which release was limited. Finally, the insecticidal activity of the composites was evaluated against the Tribolium castaneum a common wheat pest. The differences observed between montmorillonite and kaolinite composites were rationalized in relation to the nature of interaction between the components. The fumigant bioassay showed promising insecticidal effects in the case of the ternary composite cellulose acetate/chitosan/montmorillonite. Therefore, these eco-friendly nanocomposites can be used efficiently for the sustainable protection of stored cereals.

Preparation of an Aminated Lignin/Fe(III)/Polyvinyl Alcohol Film: A Packaging Material with UV Resistance and Slow-Release Function

To reduce the usage of petroleum-based plastic products, a lignin-based film material named aminated lignin/Fe(III)/PVA was developed. The mixture of 8 g lignin, 12 mL diethylenetriamine, 200 mL NaOH solution (0.4 mol·L^-1), and 8 mL formaldehyde was heated at 85 °C for 4 h; after the aminated lignin was impregnated in the Fe(NO₃)₃ solution, a mixture of 3 g aminated lignin/Fe(III), 7 g PVA, and 200 mL NaOH solution (pH 8) was heated at 85 °C for 60 min; after 2 mL of glycerin was added, the mixture was spread on a glass plate to obtain the aminated lignin/Fe(III)/PVA film. This film demonstrated hydrophobicity, an UV-blocking function, and a good slow-release performance. Due to the formation of hydrogen bonds between the hydroxyl groups of lignin and PVA, the tensile strength, the elongation at break, and the fracture resistance of the film were 9.1%, 107.8%, and 21.9% higher than that of pure PVA film, respectively. The iron content of aminated lignin/Fe(III)/PVA was 1.06 wt%, which mainly existed in a trivalent form. The aminated lignin/Fe(III)/PVA film has the potential to be used as a food packaging material with anti-ultraviolet light function and can also be developed as other packaging materials, such as seedling bowls, pots for transplanting, and coating films during transport.

Environmentally friendly hydrogel: A review of classification, preparation and application in agriculture

Superabsorbent hydrogel (SH) is three-dimensional (3D) cross-linked hydrophilic polymer that can absorb and retain large quantities of water or other aqueous solutions. SH is made of water-affinity monomers and is widely used in biomedicine, wastewater treatment, hygiene and slow-release fertilizers (SRFs). This article focused on the preparation methods of SH, superabsorbent hydrogel composite and the application of SH in agriculture. By selecting various synthetic technologies and cross-linking agents, a series of chemical cross-linking or physical networks can be designed and tailored to meet specific applications. In view of the excellent characteristics of water absorption, biodegradability, water retention and slow-release capacity, SH occupies a dominant position in the SRFs market. In this work, the agricultural application of SH in double coated SRFs and nutrients carriers is also discussed. Some mechanisms related to the nutrient release were analyzed by mathematical models. In addition, some agronomic benefits of using superabsorbent hydrogels in improving water absorption, water holding capacity and increasing crop yields were also discussed. Although SH has certain shortcomings, from the perspective of long-term development, it will further show great potential in sustainable agriculture.

Methylcellulose/lignin biocomposite as an eco-friendly and multifunctional coating material for slow-release fertilizers: Effect on nutrients management and wheat growth

To obviate adverse effects from the non-biodegradability of certain polymer-based slow-release fertilizers (SRFs) and to offset higher operational costs, the use of biopolymers as coating material has recently caught interest in the research circles. The present work aims to design a sustainable coating material based on biodegradable polymers. To this end, Alfa plant was initially exploited as a viable sustainable source for the extraction of lignin (LGe), which was in turn integrated into the development of a three-dimensional cross-linked network, including methylcellulose (MC) as a matrix and citric acid (CA) as a cross-linking agent. Then, the designed coating material was applied onto Di-ammonium Phosphate (DAP) and Triple Superphosphate (TSP) water-soluble fertilizers in a rotating pan machine. Chemical, physical, and biodegradation studies have confirmed that the coating material is environmentally-friendly. Nutrients release experiments in water as well as in soil environments have proved the effectiveness of the MC and MC/LGe coating layers in delaying the nutrients discharge. Besides, the nutrients release from coated DAP and TSP lasted longer than 30 days. Furthermore, the coating film enhanced the fertilizers mechanical resistance and boosted the soil water retention capacity. The agronomic evaluation has also confirmed their remarkable potential in enhancing wheat leaf area, chlorophyll content and biomass, in addition to the roots architecture and the final fruiting efficiency. These results showed that this hybrid composite could be used as an efficient coating material to produce slow-release fertilizers with multifunctional performances.

Modified gelatin/iron- based metal-organic framework nanocomposite hydrogel as wound dressing: Synthesis, antibacterial activity, and Camellia sinensis release

A new kind of Camellia sinensis-loaded nanocomposite hydrogel based on modified gelatin/iron-metal-organic framework was developed as an antibacterial wound dressing. Gelatin as a biocompatible natural polymer was modified with methacrylate anhydride to produce gelatin methacrylate. Thereafter, acrylic acid and acrylamide were grafted on gelatin methacrylate during an aqueous polymerization process. To enhance the porosity, mechanical strength, and drug loading capability of the hydrogel and reduce its toxicity, iron- based metal-organic framework was incorporated within the hydrogel. To add more functionality to the final wound dressing, Camellia sinensis, an antibacterial herbal drug was loaded on the hydrogel. The structural and chemical properties of prepared nanocomposite hydrogel were investigated by FTIR, XRD, SEM, and TGA techniques. The incorporation of iron-based metal-organic framework within the hydrogel matrix led to an increase in its water absorption value from 400.10 to 547.96 (g/g). The release study of Camellia sinensis (CS) extract from the prepared nanocomposite hydrogel exhibited a sustained release manner. The antibacterial test revealed the nanocomposite hydrogel contain extract has an effective antibacterial function against "Bacillus serous", "Staphylococcus aureus", "Streptococcus mutans"," Escherichia coli", "Klebsiella pneumoniae", and "Pseudomonas aeruginosa" bacteria. Therefore, the synthesized nanocomposite is a good candidate as an antibacterial hydrogel wound dressing. .

Hydrogel Application in Urban Farming: Potentials and Limitations—A Review

Urban agriculture plays a vital role in ensuring the self-sufficiency of a great variety of fresh vegetables and nutrients. It promotes a sustainable food system as well as reducing the dependency on imports for the growing population. Urban farming has made it possible for agriculture practices to be implemented anywhere at any time in a sophisticated way. Hydrogel has been introduced in urban agriculture in the past few decades. However, the application of hydrogel in urban agriculture is still being explored in terms of hydrogel types, structure, physical and chemical properties, change due to external factors, and its suitability for different plant species. This review discusses the potentials and limitations of hydrogel in different application conditions. We present the state of knowledge on hydrogel production and crosslinking methods, hydrogel characteristics, water absorption and release mechanisms of hydrogel, hydrogel advantages and limitations, and current and future applications in urban farming.

Regenerated Cellulose Products for Agricultural and Their Potential: A Review

Cellulose is one of the most abundant natural polymers with excellent biocompatibility, non-toxicity, flexibility, and renewable source. Regenerated cellulose (RC) products result from the dissolution-regeneration process risen from solvent and anti-solvent reagents, respectively. The regeneration process changes the cellulose chain conformation from cellulose I to cellulose II, leads the structure to have more amorphous regions with improved crystallinity, and inclines towards extensive modification on the RC products such as hydrogel, aerogel, cryogel, xerogel, fibers, membrane, and thin film. Recently, RC products are accentuated to be used in the agriculture field to develop future sustainable agriculture as alternatives to conventional agriculture systems. However, different solvent types and production techniques have great influences on the end properties of RC products. Besides, the fabrication of RC products from solely RC lacks excellent mechanical characteristics. Thus, the flexibility of RC has allowed it to be homogenously blended with other materials to enhance the final products' properties. This review will summarize the properties and preparation of potential RC-based products that reflect its application to replace soil the plantation medium, govern the release of the fertilizer, provide protection on crops and act as biosensors.

Cellulose nanocrystals in cancer diagnostics and treatment

Cancer is currently a major threat to public health, being among the principal causes of death to the global population. With carcinogenesis mechanisms, cancer invasion, and metastasis remaining blurred, cancer diagnosis and novel drug delivery approaches should be developed urgently to enable management and treatment. A dream break-through would be a non-invasive instantaneous monitoring of cancer initiation and progression to fast-track diagnosis for timely specialist treatment decisions. These innovations would enhance the established treatment protocols, unlimited by evasive biological complexities during tumorigenesis. It is therefore contingent that emerging and future scientific technologies be equally biased towards such innovations by exploiting the apparent properties of new developments and materials especially nanomaterials. CNCs as nanomaterials have undisputable physical and excellent biological properties that enhanced their interest as biomedical materials. This article therefore highlights CNCs utility in cancer diagnosis and therapy. Their extraction, properties, modification, in-vivo/in-vitro medical applications, biocompatibility, challenges and future perspectives are precisely discussed.

Influences of cation valence on water absorbency of crosslinked carboxymethyl cellulose

Anti-drought is a global challenge. The addition of superabsorbent polymers (SAPs) in soil can lower down the water percolation and evaporation. However, the salt-tolerance and repeating water absorbency (RWA) of prepared SAPs have not satisfied the requirements for implementation. This research investigated the influence of cation valence (Na⁺, Ca²⁺ and Al³⁺) on the structural variations of a crosslinked carboxymethyl cellulose (CCMC) using carboxymethyl cellulose (CMC) cross linked by epichlorohydrin (ECH). The results showed that higher addition of NaOH resulted in higher water absorbency (WA) due to the existence of more carboxyl group. The prepared CCMC sample with 5% CMC and 3% NaOH (CCMC₅₃) was a qualified SAP with WA of 969.0 g/g in deionized water. The salt resistance and the hydrophilicity of sample CCMC₅₃ decreased with the increase of cation valence in the solution. The introduction of Na⁺ resulted in the replacement of H⁺ from carboxyl group in sample CCMC₅₃-Na. The coordination of carboxyl group and Ca²⁺ was bidentate chelating and tridentate bridging for carboxyl group and Al³⁺. The introduction polyvalent cations benefited the stabilization of carboxyl group, however, retarded the swelling ability of sample CCMC₅₃ and hence resulted in lower WA_CS. The RWA of sample CCMC₅₃ in deionized water and salt solution dropped the most in the first absorption cycle and then reached constant after a few more cycles. It was necessary to control the first swelling degree of SAP in order to keep the RWA at a higher level.

A review on cellulose nanocrystals as promising biocompounds for the synthesis of nanocomposite hydrogels

Hydrogels are hydrophilic cross-linked polymer networks formed via the simple reaction of one or more monomers with the ability to retain a significant extent of water. Owing to an increased demand for environmentally friendly, biodegradable, and biocompatible products, cellulose nanocrystals (CNCs) with high hydrophilicity have emerged as a promising sustainable material for the formation of hydrogels. The cytocompatibility, swellability, and non-toxicity make CNC hydrogels of great interest in biomedical, biosensing, and wastewater treatment applications. There has been a considerable progress in the research of CNC hydrogels, as the number of scientific publications has exponentially increased (>600%) in the last five years. In this paper, recent progress in CNC hydrogels with particular emphasis on design, materials, and fabrication techniques to control hydrogel architecture, and advanced applications are discussed.

Slow release fertilizer hydrogels: a review

Slow release fertilizer hydrogels combine fertilizer and hydrogel into one system.

Optimisation of phosphate loading on graphene oxide–Fe(iii) composites – possibilities for engineering slow release fertilisers

Engineering of a graphene-oxide based slow release P composite as an efficient, environmental friendly fertiliser.