From synthesis to applications of biomolecule-protected luminescent gold nanoclusters

Gold nanoclusters (AuNCs) are a class of novel luminescent nanomaterials that exhibit unique properties of ultra-small size, featuring strong anti-photo-bleaching ability, substantial Stokes shift, good biocompatibility, and low toxicity. Various biomolecules have been developed as templates or ligands to protect AuNCs with enhanced stability and luminescent properties for biomedical applications. In this review, the synthesis of AuNCs based on biomolecules including amino acids, peptides, proteins and DNA are summarized. Owing to the advantages of biomolecule-protected AuNCs, they have been employed extensively for diverse applications. The biological applications, particularly in bioimaging, biosensing, disease therapy and biocatalysis have been described in detail herein. Finally, current challenges and future potential prospects of bio-templated AuNCs in biological research are briefly discussed.

Synthesis of copper nanoclusters from Bacopa monnieri leaves for fluorescence sensing of dichlorvos

In this work, a facile one-step green synthesis was developed for the fabrication of blue fluorescent copper nanocluster (Brahmi-CuNCs) from the extract of Bacopa monnieri (common name is Brahmi) via a microwave method. The as-prepared Brahmi-CuNCs emitted blue fluorescence at 452 nm when excited at 352 nm and showed a quantum yield of 31.32%. Brahmi-derived blue fluorescent CuNCs acted as a probe for fluorescence sensing of dichlorvos. Upon the addition of dichlorvos, the blue emission for Brahmi-CuNCs was gradually turned off, favouring establishment of a calibration graph in the range 0.5-100 μM with a detection limit of 0.23 μM. The as-synthesized Brahmi-CuNCs exhibited marked sensitivity and selectivity towards dichlorvos, favourable for assaying dichlorvos in various samples (cabbage, apple juice, and rice).

Towards Green Synthesis of Fluorescent Metal Nanoclusters

In the modern development of nanoscience and nanotechnology, metal nanoclusters have emerged as a foremost category of nanomaterials exhibiting remarkable biocompatibility and photo-stability having dramatically distinctive optical, electronic, and chemical properties. This review focuses on synthesizing fluorescent metal nanoclusters in a greener way to make them suitable for biological imaging and drug delivery application. The green methodology is the desired route for sustainable chemical production and should be utilized for any form of chemical synthesis including nanomaterials. It aims to eliminate harmful waste, uses non-toxic solvents, and employs energy-efficient processes for the synthesis. This article provides an overview of conventional synthesis methods, including stabilizing nanoclusters by small organic molecules in organic solvents. Then we focus on the improvement of properties, applications of green synthesized metal nanoclusters, challenges involved, and further advancement required in the direction of green synthesis of MNCs. There are plenty of problems for scientists to solve to make nanoclusters suitable for bio-applications, chemical sensing, and catalysis synthesized by green methods. Using bio-compatible and electron-rich ligands, understanding ligand-metal interfacial interactions, employing more energy-efficient processes, and utilizing bio-inspired templates for synthesis are some immediate problems worth solving in this field that requires continued efforts and interdisciplinary knowledge and collaboration.

Synthesis of Greenish-Yellow Fluorescent Copper Nanocluster for the Selective and Sensitive Detection of Fipronil Pesticide in Vegetables and Grain Samples

In this paper, a new synthetic route is introduced for the synthesis of high-luminescent greenish-yellow fluorescent copper nanoclusters (PVP@A. senna-Cu NCs) using Avaram senna (A. senna) and polyvinylpyrrolidone (PVP) as templates. A. senna plant extract mainly contains variety of phytochemicals including glycosides, sugars, saponins, phenols, and terpenoids that show good pharmacological activities such as anti-inflammatory, antioxidant, and antidiabetic. PVP is a stable and biocompatible polymer that is used as a stabilizing agent for the synthesis of PVP@A. senna-Cu NCs. The size, surface functionality, and element composition of the fabricated Cu NCs were confirmed by various analytical techniques. The as-prepared greenish-yellow fluorescent Cu NCs exhibit significant selectivity towards fipronil, thereby favoring to assay fipronil pesticide with good linearity in the range of 3.0-30 μM with a detection limit of 65.19 nM. More importantly, PVP@A. senna-Cu NCs are successfully applied to assay fipronil in vegetable and grain samples.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Highly Sensitive Detection of Chymotrypsin Based on Metal Organic Frameworks with Peptides Sensors

In this study, peptides and composite nanomaterials based on copper nanoclusters (CuNCs) were used to detect chymotrypsin. The peptide was a chymotrypsin-specific cleavage peptide. The amino end of the peptide was covalently bound to CuNCs. The sulfhydryl group at the other end of the peptide can covalently combine with the composite nanomaterials. The fluorescence was quenched by fluorescence resonance energy transfer. The specific site of the peptide was cleaved by chymotrypsin. Therefore, the CuNCs were far away from the surface of the composite nanomaterials, and the intensity of fluorescence was restored. The limit of detection (LOD) using Porous Coordination Network (PCN)@graphene oxide (GO) @ gold nanoparticle (AuNP) sensor was lower than that of using PCN@AuNPs. The LOD based on PCN@GO@AuNPs was reduced from 9.57 pg mL^-1 to 3.91 pg mL^-1. This method was also used in a real sample. Therefore, it is a promising method in the biomedical field.

Synthesis of blue fluorescent molybdenum nanoclusters with novel terephthaldehyde-cysteine Schiff base for detection of pyrophosphate

In this work, terephthaldehyde-cysteine-molybdenum nanoclusters (TPA-Cys-MoNCs) were synthesized by using terephthaldehyde-cysteine (TPA-Cys) Schiff base as a novel ligand. The as-synthesized TPA-Cys-MoNCs showed blue fluorescence under UV lamp at 365 nm, displaying emission peak at 455 nm when excited at 340 nm. The fluorescent TPA-Cys-MoNCs are used as a probe for sensitive assay of pyrophosphate (PPi) via fluorescence quenching mechanism. The emission peak intensity of TPA-Cys-MoNCs at 455 nm exhibited a linear quenching with increasing amount of PPi. As a result, quantitative assay was developed for the detection of PPi (0.01-200 µM) with the detection limit of 0.9 nM. The developed probe was successfully demonstrated for the detection of PPi in biofluids (urine and plasma).

Synthesis of metal nanoclusters and their application in Hg2+ ions detection: A review

Mercuric (Hg²⁺) ions released from human activities, natural phenomena, and industrial sources are regarded as the global pollutant of world's water. Hg²⁺ ions contaminated water has several adverse effects on human health and the environment even at low concentrations. Therefore, rapid and cost-effective method is urgently required for the detection of Hg²⁺ ions in water. Although, the current analytical methods applied for the detection of Hg²⁺ ions provide low detection limit, they are time consuming, require expensive equipment, and are not suitable for in-situ analysis. Metal nanoclusters (MNCs) consisting of several to ten metal atoms are important transition missing between single atoms and plasmonic metal nanoparticles. In addition, sub-nanometer sized MNCs possess unique electronic structures and the subsequent unusual optical, physical, and chemical properties. Because of these novel properties, MNCs as a promising material have attracted considerable attention for the construction of selective and sensitive sensors to monitor water quality. Hence this review is focused on recent advances on synthesis strategies, and optical and chemical properties of various MNCs including their applications to develop optical assay for Hg²⁺ ions in aqueous solutions.

Nucleoside-regulated catalytic activity of copper nanoclusters and their application for mercury ion detection

In this work, a novel method for the synthesis of copper nanoclusters is developed using nucleosides as templates and hydroxylamine hydrochloride as the reductant. Various nucleosides can regulate the catalytic activity of copper nanoclusters.

Synthesis of Copper Nanocluster and Its Application in Pollutant Analysis

Copper nanoclusters (Cu NCs) with their inherent optical and chemical advantages have gained increasing attention as a kind of novel material that possesses great potential, primarily in the use of contaminants sensing and bio-imaging. With a focus on environmental safety, this article comprehensively reviews the recent advances of Cu NCs in the application of various contaminants, including pesticide residues, heavy metal ions, sulfide ions and nitroaromatics. The common preparation methods and sensing mechanisms are summarized. The typical high-quality sensing probes based on Cu NCs towards various target contaminants are presented; additionally, the challenges and future perspectives in the development and application of Cu NCs in monitoring and analyzing environmental pollutants are discussed.

Synthesis of water-soluble, ultrabright Cu nanoclusters with core-shell structure via facile reduction approach for determination of 4-nitrophenol

In this work, we reported a facile reduction approach for fabrication of water-soluble and ultrabright Cu nanoclusters with core-shell structure. A certain amount of reducing agent as NaBH₄was introduced into the polyethyleneimine-stabilized Cu nanoclusters (CuNCs@PEI) system, which exhibited 4-fold fluorescence enhancement along with a blue shift of the emission peak. The variations of morphology, valence states and functional groups demonstrated that a Cu shell was formed surround CuNCs (defined as CuNCs-Cu@PEI), attributable to metal complex (PEI-Cu⁺and PEI-Cu²⁺) reduction. The effect of core-shell morphology on luminous and electron relaxation mechanism of CuNCs-Cu@PEI was investigated via temperature-dependent steady and time-resolved fluorescence measurements. The CuNCs-Cu@PEI with a high fluorescence quantum yields of 22.59% were able to homogeneously disperse in aqueous phase, indicating their potential applications in biological labeling, sensing and invivoimaging. Finally, the CuNCs-Cu@PEI was employed as a fluorescence probe to determine 4-nitrophenol, of which the detection limit was much lower than initial CuNCs@PEI.

Synergistic integration of metal nanoclusters and biomolecules as hybrid systems for therapeutic applications

Therapeutic nanoparticles are designed to enhance efficacy, real-time monitoring, targeting accuracy, biocompatibility, biodegradability, safety, and the synergy of diagnosis and treatment of diseases by leveraging the unique physicochemical and biological properties of well-developed bio-nanomaterials. Recently, bio-inspired metal nanoclusters (NCs) consisting of several to roughly dozens of atoms (<2 nm) have attracted increasing research interest, owing to their ultrafine size, tunable fluorescent capability, good biocompatibility, variable metallic composition, and extensive surface bio-functionalization. Hybrid core-shell nanostructures that effectively incorporate unique fluorescent inorganic moieties with various biomolecules, such as proteins (enzymes, antigens, and antibodies), DNA, and specific cells, create fluorescently visualized molecular nanoparticle. The resultant nanoparticles possess combinatorial properties and synergistic efficacy, such as simplicity, active bio-responsiveness, improved applicability, and low cost, for combination therapy, such as accurate targeting, bioimaging, and enhanced therapeutic and biocatalytic effects. In contrast to larger nanoparticles, bio-inspired metal NCs allow rapid renal clearance and better pharmacokinetics in biological systems. Notably, advances in nanoscience, interfacial chemistry, and biotechnologies have further spurred researchers to explore bio-inspired metal NCs for therapeutic purposes. The current review presents a comprehensive and timely overview of various metal NCs for various therapeutic applications, with a special emphasis on the design rationale behind the use of biomolecules/cells as the main scaffolds. In the different hybrid platform, we summarize the current challenges and emerging perspectives, which are expected to offer in-depth insight into the rational design of bio-inspired metal NCs for personalized treatment and clinical translation.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

A novel"turn-off"fluorescence assay based on acid-copper nanoclusters in deep eutectic solvent micelles for co-aggregation inducing fluorescence enhancement and its application

As mixtures, deep eutectic solvent (DES) is designability. By adjusting the long alkyl chain hydrogen bond acceptors (HBAs) or hydrogen bond donors (HBDs), the DES displays surfactant characteristics and can form micelles. Hence, a novel, simple, facile and green natural organic acids capped copper nanoclusters (Aci-CuNCs) was synthesized and the spectrum behavior of Aci-CuNCs in DES micelles was researched. It was found that the surfactant-like DES can form micellar co-aggregation with Aci-CuNCs, resulting in the fluorescence (FL) intensive of Aci-CuNCs increase. Corresponding performance of spectral properties of Aci-CuNCs in DES medium were systematically studied by fourier transform infrared spectrometer, 3D FL spectroscopy, FL emission/excitation spectra, ultraviolet absorption spectroscopy. In the mechanism exploration part, on the one hand, the existence of micellar co-aggregation was confirmed by the conductivity, the mass effect of DES, dynamic light scattering and transmission electron microscopy. On the other hand, the influence of different kinds of DESs (types of HBAs/HBDs, molar ratio) and some possible factors (ionic strength and temperature) were discussed in detail to investigate the main driving forces for the formation of micellar co-aggregates. The results of mechanism exploration prove that the long alkyl chain of DES is amphiphilic which can form micellar co-aggregation with Aci-CuNCs through hydrogen bonding. The DES micelle provides Aci-CuNCs with a relatively stable and closed micro-environment which can effectively prevent collisions with water molecules and weakening of fluorescence intensity. On the basic of the above research, a "turn-off" fluorimetric method based on Aci-CuNCs in DES medium was applied for the determination of Fe³⁺. Under the optimum conditions, the assay worked in the Fe³⁺ concentration ranges from 1 to -20 μM and had a detection limit of 0.0374 μM. Method validation study illustrates the proposed system can provide a good accuracy, repeatability and stability conditions. Furthermore, the real sample analysis result demonstrates that no obvious matrix effect is found. As a consequence, the FL assays (Aci-CuNCs-based DES) composed of natural organic acid capped CuNCs and green solvent DES provides a simple, gentle and environmentally friendly method for the detection of iron ions.

Engineering amino-mediated copper nanoclusters with dual emission and assembly-to-monodispersion switching by pH-triggered surface modulation

We synthesized l-cysteine (Cys)-mediated copper nanoclusters (CuNCs) with assembly-to-monodispersion switching by pH-triggered surface modulation, where aggregated red emissive (R)-CuNCs@Cys at pH = 3 turns to monodispersed blue emissive (B)-CuNCs@Cys at pH = 10.

Functionalized Copper Nanoclusters-Based Fluorescent Probe with Aggregation-Induced Emission Property for Selective Detection of Sulfide Ions in Food Additives

In this paper, a novel and facile synthetic method of 3-mercaptopropionic acid functionalized copper nanoclusters with aggregation-induced emission (AIE) induced by Cu²⁺ (Cu²⁺@MPA-Cu NCs) was developed by a one-pot reaction as a fluorescent probe for the detection of sulfide ion (S^2-). The prepared Cu²⁺@MPA-Cu NCs behaved as aggregated clusters and had strong pink fluorescence under 365 nm UV light with excellent fluorescence emission at 610 nm. The quantum yield increased from 0.56% to 4.8% before and after Cu²⁺ added. The presence of S^2- would strongly bind to Cu²⁺, which caused the structure of the aggregated Cu²⁺@MPA-Cu NCs to be destroyed and then the fluorescence quenched. On the basis of this principle, a fluorescent probe was constructed for the detection of S^2- with a very good linearity in the range 0-600 μM (R² = 0.9843) and a detection limit of 26.3 nM. Finally, the nanohybrids were successfully demonstrated for the application in the selective detection of S^2- in food additives. This study essentially paved a new avenue for effectively developing an easy sensor platform for S^2- measurements in food additives.

Red-emitting GSH-Cu NCs as a triplet induced quenched fluorescent probe for fast detection of thiol pollutants

Thiol compounds exist widely on the Earth and have certain significance in the fields of the circulation of the sulfur element and industrial production. However, the odor and biological toxicity of thiol compounds make them pollutants that seriously threaten the environmental safety and the living quality of human. In this study, a novel triplet induced fluorescence "turn-off" strategy was designed for the detection of thiol pollutants via a glutathione-stabilized copper nanocluster (GSH-Cu NC) probe. The as-prepared GSH-Cu NCs not only have small size and good water-solubility, but also exhibit strong red-emitting fluorescence at 630 nm, which could be quenched quantitatively with the increase of the concentration of thiol pollutants. So they were employed to detect thioglycolic acid (TGA), 3-mercaptopropionic acid (MPA), 2-mercaptoethanol (ME) and 2-(diethylamino)ethanethiol (2-AT) in a wide linear range of 1-100 μM with detection limits of 0.73 μM, 0.43 μM, 0.37 μM, and 0.69 μM, respectively. This method was successfully applied to detect the above thiol pollutants in lake water with good recoveries. Moreover, their further application was also expanded as luminous test strips based on the excellent fluorescence characteristics of GSH-Cu NCs for fast real-time detection of thiol pollutants.

Carbon dots as versatile nanoarchitectures for the treatment of neurological disorders and their theranostic applications: A review

The development of novel methods plays a fundamental role in early diagnosis and controlling of neurological disorders (NDs). Blood-brain barrier (BBB) is the most challenging barrier for the development of neuro drug delivery systems due to its inhibiting ability to enter drugs and agents into central nervous system (CNS). Carbon dots (CDs) have shown to be very promising and outstanding agents for various biomedical applications (bio imaging studies, treatment of NDs and brain tumors). They exhibit remarkable properties such as biocompatibility, small size (less than 10 nm, enabling penetration into BBB), tunable optical properties, photostability and simple synthetic procedures, allowing them to act as ideal candidates in various fields of science. Therefore, the objective of this review is to overview the recent studies on CDs for the development of neuro drug delivery systems to reach CNS via crossing of BBB. Primarily, this review briefly outlines the unique optical properties and toxicity of CDs. The development of novel neuro drug delivery systems for various neurological disorders using CDs as carriers is described. This review also covers the potential applications of CDs in brain tumors imaging and treatment of neurodegenerative diseases. Finally, the sensing applications and future prospects of CDs are summarized.

A novel nanosensor for detecting tetracycline based on fluorescent palladium nanoclusters

Tetracycline (TC) is considered one of the most widely used antibiotic medicines, and ranks the second highest in global production and usage among all antibiotics.

A Comparative Study of the Toxicity of Polyethylene Glycol-Coated Cobalt Ferrite Nanospheres and Nanoparticles

We present a comparative study of the toxicity of polyethylene glycol (PEG)-coated cobalt ferrite nanoparticles and nanospheres. Nanoparticles were prepared by hydrothermal method while nanospheres were prepared by solvothermal technique. The surface of nanomaterials was successfully modified with polyethylene glycol. To investigate the morphology of the prepared samples, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, thermogravimetric analysis (TGA), and electron microscopy techniques were employed. Structural analyses confirmed the formation of polycrystalline cobalt ferrite nanoparticles with diameters in the range 20-25 nm and nanospheres in the range 80-100 nm, respectively. Kunming SPF mice (female, 6-8 weeks old) were used to investigate the toxicity induced by cobalt ferrite nanoparticles and nanospheres in different organs of the mice. Biodistribution studies, biochemical indices, histopathological assessments, inflammatory factors, oxidation and antioxidant levels, and cytotoxicity tests were performed to assess the toxicity induced by cobalt ferrite nanoparticles and nanospheres in mice. Cobalt ferrite nanospheres were found to be more toxic than the nanoparticles and curcumin was proved to be a good healing agent for the toxicity induced by PEG-coated cobalt ferrite nanomaterials in mice.

Acid Oxidation of Muskmelon Fruit for the Fabrication of Carbon Dots with Specific Emission Colors for Recognition of Hg2+ Ions and Cell Imaging

In this study, water-soluble emissive carbon dots (CDs) are effectively fabricated with specific optical properties and colors by acid oxidation of muskmelon (Cucumis melo) fruit, which are termed as C. melo CDs (CMCDs). The fluorescence properties of CMCDs were tuned by controlling the experimental conditions that allow them to emit different colors, that is, blue (B-), green (G-), and yellow (Y-) CMCDs, with different emission wavelengths at 432, 515, and 554 nm when excited at 342, 415, and 425 nm, respectively. The fabricated multicolor-emissive CDs were confirmed by various analytical techniques. The sizes of B-, G-, and Y-CMCDs were found to be ∼3.5, ∼4.3, and ∼5.8 nm, respectively. The as-prepared CMCDs display stable emissions with quantum yields of 7.07, 26.9, and 14.3% for the three CMCDs, which could act as a promising probe for the selective detection of Hg²⁺ ions. Upon the addition of Hg²⁺ ions, the fluorescence intensity of G-CMCDs at 515 nm was quenched largely than that of B- and Y-CMCDs. The spectroscopic results display that the G-CMCDs acted as a sensor for the detection of Hg²⁺ ions with a wide linear range from 1.0 to 25 μM (R ² = 0.9855) with a detection limit of 0.33 μM. This method was successfully applied to detect Hg²⁺ ions in biological and water samples. The fabricated multicolor-emissive CMCDs possess the cell (Cunninghamella elegans, Aspergillus flavus, and Rhizoctonia solani) imaging property, suggesting the biocompatible nature for multicolor imaging of various cells.

Recent progress in copper nanocluster-based fluorescent probing: a review

Copper nanoclusters (CuNCs) are an attractive alternative to other metal nanoclusters. The synthesis of CuNCs is highly efficient and fast, with low-cost and without any complicated manipulation. Because of their tunable fluorescence and low toxicity, CuNCs have been highly exploited for biochemical sensing. This review (with 172 refs.) summarizes the progress that has been made in the field in the past years. Following an introduction into the fundamentals of CuNCs, the review first focuses on synthetic methods and the fluorescence properties of CuNCs (with subsections on the use of proteins, peptides, DNA and other molecules as templates). This is followed by a section on the use of CuNCs in fluorometric assays, with subsections on the detection of small molecules, proteins, nucleic acids, various other biomolecules including drugs, and of pH values. A further large chapter summarizes the work related to environmental analyses, specifically on determination of metal ions, anions and pollutants. Graphical abstract Schematic representation of the synthesis and potential applications of copper nanocluster (CuNCs) in biochemical analysis, emphatically reflected in some vital areas such as small molecule analysis, biomacromolecule monitoring, cell imaging, ions detection, toxic pollutant, etc.

Strategic Approaches for Highly Selective and Sensitive Detection of Hg2+ Ion Using Mass Sensitive Sensors

Here we present a quartz crystal microbalance (QCM) sensor for the highly selective and sensitive detection of Hg²⁺ ion, a toxic chemical species and a hazardous environmental contaminant. Hg²⁺ ion can be quantitatively measured based on changes in the resonance frequency of QCM following mass changes on the QCM sensor surface. The high selectivity for Hg²⁺ ion in this study can be obtained using a thymine-Hg²⁺-thymine pair, which is more stable than the adenine-thymine base pair in DNA. On the other hand, gold nanoparticles (AuNPs) and their size-enhancement techniques were used to amplify the QCM signals to increase the sensitivity for Hg²⁺ ion. With this strategic approach, the proposed QCM sensor can be used to quantitatively analyze Hg²⁺ ion with high selectivity and sensitivity. The detection limit was as low as 98.7 pM. The sensor failed to work with other metal ions at concentrations 1000-times higher than that of the Hg²⁺ ion. Finally, the recovery does not exceed 10% of the original value for the detection of Hg²⁺ ion in tap and bottled water. The results indicate acceptable accuracy and precision for practical applications.

Fluorescence-tunable copper nanoclusters and their application in hexavalent chromium sensing

Generally, metal nanoclusters are synthesized using only a single ligand. Thus, the properties and applications of these nanomaterials are limited by the nature of the ligand used. In this study, we have developed a new synthetic strategy to prepare bi-ligand copper nanoclusters (Cu NCs). These bi-ligand Cu NCs are synthesized from copper ions, thiosalicylic acid, and cysteamine by a simple one-pot method, and they exhibit high quantum yields (>18.9%) and good photostability. Most interestingly, the fluorescence intensities and surface properties of the Cu NCs can be tailored by changing the ratio of the two ligands. Consequently, the bi-ligand Cu NCs show great promise as fluorescent probes. Accordingly, the Cu NCs were applied to the inner-filter-effect-based detection of hexavalent chromium in water. A wide linear range of 0.1–1000 μM and a low detection limit (signal-to-noise ratio = 3) of 0.03 μM was obtained. The recoveries for the real sample analysis were between 98.3 and 105.0% and the relative standard deviations were below 4.54%, demonstrating the repeatability and practical utility of this assay.

Generally, metal nanoclusters are synthesized using only a single ligand.