A molecular-scale portrait of domain imaging in organic surfaces

Shear Anisotropy Domains on Graphene Revealed by In-Plane Elastic Imaging

Anisotropic domains with 180° periodicity are known to be universally present on graphene as well as on other two-dimensional (2D) crystals. The physical origin of the domains and the mechanism of its anisotropy are, however, still unclear. Here, by employing in-plane elastic imaging by torsional resonance atomic force microscopy (TR-AFM), we demonstrate that the observed domains on graphene are of in-plane elastic (shear) anisotropy but not of friction anisotropy as commonly believed. Our results also support that the anisotropic domains originate from self-assembled environmental adsorbates on graphene surfaces. The more densely packed backbone of the highly ordered molecules within a domain defines the major axis of the shear anisotropy of the latter. This work suggests a quantitative understanding of the characteristics of anisotropic domains on 2D materials. It also demonstrates TR-AFM as a powerful tool to study the in-plane elastic anisotropy of materials, including organic molecular crystals.

Friction Force Mapping of Molecular Ordering and Mesoscopic Phase Transformations in Layered-Crystalline Organic Semiconductor Films

It is critical to understand molecular ordering processes in small-molecule organic semiconductor (OSC) films in optimizing electronic device applications, although it is difficult to observe and investigate the ordering characteristics at a mesoscopic or device scale. Here, we report that friction force microscopy (FFM) allows visualizing the ordering transformation process from a thermodynamically metastable phase to a stable phase at a mesoscopic scale. We utilized 2-octyl-benzothieno[3,2-b]naphtho[2,3-b]thiophene (2-C8-BTNT) as a typical highly layered-crystalline OSC. We found that the friction force between an AFM tip and spin-coated OSC films significantly depends on whether local film states are in metastable monolayer phase or stable bilayer-type herringbone (b-LHB) phase that exhibits high carrier mobility. The formation of the stable b-LHB phase leads to lower friction than the metastable monolayer phase, clearly visualizing the molecular order. Force map (Fmap) analysis indicates that the lower friction in the b-LHB phase should be associated with the reduction of interfacial adhesion force. Notably, the observed results demonstrate that the spin-coated thin film changes from continuous film with the monolayer phase to rugged microcrystal grains with the b-LHB phase when left at ambient conditions. By contrast, an appropriate post-thermal annealing process facilitates the phase transformation without inducing such morphological changes. The technique provides a unique and effective tool for revealing the relationship between processing conditions and device performance in polycrystalline OSC films.

Correlating Nanoscale Optical Coherence Length and Microscale Topography in Organic Materials by Coherent Two-Dimensional Microspectroscopy

Many nanotechnology materials rely on a hierarchical structure ranging from the nanometer scale to the micrometer scale. Their interplay determines the nanoscale optical coherence length, which plays a key role in energy transport and radiative decay and, thus, the optoelectronic applications. However, it is challenging to detect optical coherence length in multiscale structures with existing methods. Techniques such as atomic force microscopy and transmission electron microscopy are not sensitive to optical coherence length. Linear absorption and fluorescence spectroscopy methods, on the other hand, were generally limited by inhomogeneous broadening, which often obstructs the determination of nanoscale coherence length. Here, we carry out coherent two-dimensional microspectroscopy to obtain a map of the local optical coherence length within a hierarchically structured molecular film. Interestingly, the nanoscale coherence length is found to correlate with microscale topography, suggesting a perspective for controlling structural coherence on molecular length scales by appropriate microscopic growth conditions.

Friction Anisotropy of MoS2: Effect of Tip-Sample Contact Quality

Atomic-scale friction measured for a single asperity sliding on 2D materials depend on the direction of scanning relative to the material's crystal lattice. Here, nanoscale friction anisotropy of wrinkle-free bulk and monolayer MoS₂ is characterized using atomic force microscopy and molecular dynamics simulations. Both techniques show 180° periodicity (2-fold symmetry) of atomic-lattice stick-slip friction vs. the tip's scanning direction with respect to the MoS₂ surface. The 60° periodicity (6-fold symmetry) expected from the MoS₂ surface's symmetry is only recovered in simulations where the sample is rotated, as opposed to the scanning direction changed. All observations are explained by the potential energy landscape of the tip-sample contact, in contrast with nanoscale topographic wrinkles that have been proposed previously as the source of anisotropy. These results demonstrate the importance of the tip-sample contact quality in determining the potential energy landscape and, in turn, friction at the nanoscale.

Impact of Nanomorphology on Surface Doping of Organic Semiconductors: The Pentacene-C60F48 Interface

Establishing the rather complex correlation between the structure and the charge transfer in organic-organic heterostructures is of utmost importance for organic electronics and requires spatially resolved structural, chemical, and electronic details. Insight into this issue is provided here by combining atomic force microscopy, Kelvin probe force microscopy, photoemission electron microscopy, and low-energy electron microscopy for investigating a case study. We select the interface formed by pentacene (PEN), benchmark among the donor organic semiconductors, and a p-type dopant from the family of fluorinated fullerenes. As for Buckminsterfullerene (C₆₀), the growth of its fluorinated derivative C₆₀F₄₈ is influenced by the thickness and crystallinity of the PEN buffer layer, but the behavior is markedly different. We provide a microscopic description of the C₆₀F₄₈/PEN interface formation and analyze the consequences in the electronic properties of the final heterostructure. For just one single layer of PEN, a laterally complete but noncompact C₆₀F₄₈/PEN interface is created, importantly affecting the surface work function. Nonetheless, from the very beginning of the second layer formation, the presence of epitaxial and nonepitaxial PEN domains dramatically influences the growth dynamics and extremely well packed two-dimensional C₆₀F₄₈ islands develop. Insightful elemental maps of the C₆₀F₄₈/PEN surface spatially resolve the nonuniform distribution of the dopant molecules, which leads to a heterogeneous work function landscape.

Nanoconfinement and Sansetsukon-like Nanocrawling Govern Fibrinogen Dynamics and Self-Assembly on Nanostructured Polymeric Surfaces

Surface nanostructures are increasingly more employed for controlled protein assembly on functional nanodevices, in nanobiotechnology, and in nanobiomaterials. However, the mechanism and dynamics of how nanostructures induce order in the adsorbed protein assemblies are still enigmatic. Here, we use single-molecule mapping by accumulated probe trajectories and complementary atomic force microscopy to shed light on the dynamic of in situ assembly of human plasma fibrinogen (HPF) adsorbed on nanostructured polybutene-1 (PB-1) and nanostructured polyethylene (PE) surfaces. We found a distinct lateral heterogeneity of HPF-polymer nanostructure interface (surface occupancy, residence time, and diffusion coefficient) that allow identifying the interplay between protein topographical nanoconfinement, protein diffusion mechanism, and ordered protein self-assembly. The protein diffusion analysis revealed high-diffusion polarization without correlation to the anisotropic friction characteristic of the polymer surfaces. This suggests that HPF molecules confined on the nanosized PB-1 needle crystals and PE shish-kebab crystals, respectively, undergo partial detachment and diffuse via a Sansetsukon-like nanocrawling mechanism. This mechanism is based on the intrinsic flexibility of HPF in the coiled-coil regions. We conclude that nanostructured surfaces that encourage this characteristic surface mobility are more likely to lead to the formation of ordered protein assemblies and may be useful for advanced nanobiomaterials.

Molecules on rails: friction anisotropy and preferential sliding directions of organic nanocrystallites on two-dimensional materials

Two-dimensional (2D) materials are envisaged as ultra-thin solid lubricants for nanomechanical systems. So far, their frictional properties at the nanoscale have been studied by standard friction force microscopy. However, lateral manipulation of nanoparticles is a more suitable method to study the dependence of friction on the crystallography of two contacting surfaces. Still, such experiments are lacking. In this study, we combine atomic force microscopy (AFM) based lateral manipulation and molecular dynamics simulations in order to investigate the movements of organic needle-like nanocrystallites grown by van der Waals epitaxy on graphene and hexagonal boron nitride. We observe that nanoneedle fragments - when pushed by an AFM tip - do not move along the original pushing directions. Instead, they slide on the 2D materials preferentially along the needles' growth directions, which act as invisible rails along commensurate directions. Further, when the nanocrystallites were rotated by applying a torque with the AFM tip across the preferential sliding directions, we find an increase of the torsional signal of the AFM cantilever. We demonstrate in conjunction with simulations that both, the significant friction anisotropy and preferential sliding directions are determined by the complex epitaxial relation and arise from the commensurate and incommensurate states between the organic nanocrystallites and the 2D materials.

Subnanometer Resolution and Enhanced Friction Contrast at the Surface of Perylene Diimide PDI8-CN2 Thin Films in Ambient Conditions

We report high-resolution surface morphology and friction force maps of polycrystalline organic thin films derived by deposition of the n-type perylene diimide semiconductor PDI8-CN₂. We show that the in-plane molecular arrangement into ordered, cofacial slip-stacked rows results in a largely anisotropic surface structure, with a characteristic sawtooth corrugation of a few Ångstroms wavelength and height. Load-controlled experiments reveal different types of friction contrast between the alternating sloped and stepped regions, with transitions from atomic-scale dissipative stick-slip to smooth sliding with ultralow friction within the surface unit cell. Notably, such a rich phenomenology is captured under ambient conditions. We demonstrate that friction contrast is well reproduced by numerical simulations assuming a reduced corrugation of the tip-molecule potential nearby the step edges. We propose that the side alkyl chains pack into a compact low-surface-energy overlayer, and friction modulation reflects periodic heterogeneity of chains bending properties and subsurface anchoring to the perylene cores.

Decoding the Vertical Phase Separation and Its Impact on C8-BTBT/PS Transistor Properties

Disentangling the details of the vertical distribution of small semiconductor molecules blended with polystyrene (PS) and the contact properties are issues of fundamental value for designing strategies to optimize small-molecule:polymer blend organic transistors. These questions are addressed here for ultrathin blends of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) and PS processed by a solution-shearing technique using three different blend composition ratios. We show that friction force microscopy (FFM) allows the determination of the lateral and vertical distribution of the two materials at the nanoscale. Our results demonstrate a three-layer stratification of the blend: a film of C8-BTBT of few molecular layers with crystalline order sandwiched between a PS-rich layer at the bottom (a few nm thick) acting as a passivating dielectric layer and a PS-rich skin layer on the top (∼1 nm) conferring stability to the devices. Kelvin probe force microscopy (KPFM) measurements performed in operating organic field-effect transistors (OFETs) reveal that the devices are strongly contact-limited and suggest contact doping as a route for device optimization. By excluding the effect of the contacts, field-effect mobility values in the channel as high as 10 cm² V^-1 s^-1 are obtained. Our findings, obtained via a combination of FFM and KPFM, provide a satisfactory explanation of the different electrical performances of the OFETs as a function of the blend composition ratio and by doping the contacts.

Real Space Demonstration of Induced Crystalline 3D Nanostructuration of Organic Layers

The controlled 3D nanostructuration of molecular layers of the semiconducting molecules C₂₂H₁₄ (pentacene) and N,N'-dioctyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C8) is addressed. A tip-assisted method using atomic force microscopy (AFM) is developed for removing part of the organic material and relocating it in up to six layer thick nanostructures. Moreover, unconventional molecular scale imaging combining diverse friction force microscopy modes reveals the stacking sequence of the piled layers. In particular, we unambiguously achieve epitaxial growth, an issue of fundamental importance in thin film strategies for the nanostructuration of more efficient organic nanodevices.