Visualizing and quantifying the nanoscale hydrophobicity and chemical distribution of surface modified polyethersulfone (PES) membranes

Antifouling modification for high-performance isolation of circulating tumor cells

Circulating tumor cells (CTCs), which shed from solid tumor tissue into blood circulatory system, have attracted wide attention as a biomarker in the early diagnosis and prognosis of cancer. Given their potential significance in clinics, many platforms have been developed to separate CTCs. However, the high-performance isolation of CTCs remains significant challenges including achieving the sensitivity and specificity necessary due to their extreme rarity and severe biofouling in blood, such as billions of background cells and various proteins. With the advancement of CTCs detection technologies in recent years, the highly efficient and highly specific detection platforms for CTCs have gradually been developed, resulting in improving CTC capture efficiency, purity and sensitivity. In this review, we systematically describe the current strategies with surface modifications by utilizing the antifouling property of polymer, peptide, protein and cell membrane for high-performance enrichment of CTCs. To wrap up, we discuss the substantial challenges facing by current technologies and the potential directions for future research and development.

Molecular Dynamics Investigation of Nanoscale Hydrophobicity of Polymer Surfaces: What Makes Water Wet?

The wettability of a polymer surface─related to its hydrophobicity or tendency to repel water─can be crucial for determining its utility, such as for a coating or a purification membrane. While wettability is commonly associated with the macroscopic measurement of a contact angle between surface, water, and air, the molecular physics that underlie these macroscopic observations are not fully known, and anticipating the relative behavior of different polymers is challenging. To address this gap in molecular-level understanding, we use molecular dynamics simulations to investigate and contrast interactions of water with six chemically distinct polymers: polytetrafluoroethylene, polyethylene, polyvinyl chloride, poly(methyl methacrylate), Nylon-66, and poly(vinyl alcohol). We show that several prospective quantitative metrics for hydrophobicity agree well with experimental contact angles. Moreover, the behavior of water in proximity to these polymer surfaces can be distinguished with analysis of interfacial water dynamics, extent of hydrogen bonding, and molecular orientation─even when macroscopic measures of hydrophobicity are similar. The predominant factor dictating wettability is found to be the extent of hydrogen bonding between polymer and water, but the precise manifestation of hydrogen bonding and its impact on surface water structure varies. In the absence of hydrogen bonding, other molecular interactions and polymer mechanics control hydrophobic ordering. These results provide new insights into how polymer chemistry specifically impacts water-polymer interactions and translates to surface hydrophobicity. Such factors may facilitate the design or processing of polymer surfaces to achieve targeted wetting behavior, and presented analyses can be useful in studying the interfacial physics of other systems.

Nanoscale Hydrophobicity and Electrochemical Mapping Provides Insights into Facet Dependent Silver Nanoparticle Dissolution

Metal or metallic nanoparticle dissolution influences particle stability, reactivity, potential fate, and transport. This work investigated the dissolution behavior of silver nanoparticles (Ag NPs) in three different shapes (nanocube, nanorod, and octahedron). The hydrophobicity and electrochemical activity at the local surfaces of Ag NPs were both examined using atomic force microscopy (AFM) coupled with scanning electrochemical microscopy (AFM-SECM). The surface electrochemical activity of Ag NPs more significantly affected the dissolution than the local surface hydrophobicity did. Octahedron Ag NPs with dominant surface exposed facets of {111} dissolved faster than the other two kinds of Ag NPs. Density functional theory (DFT) calculation revealed that the {100} facet elicited greater affinities toward H₂O than the {111} facet. Thus, poly(vinylpyrrolidone) or PVP coating on the {100} facet is critical for stabilizing and prevent the {100} facet from dissolution. Finally, COMSOL simulations demonstrated consistent shape dependent dissolution as we observed experimentally.

Ultra-low pressure PES ultrafiltration membrane with high-flux and enhanced anti-oil-fouling properties prepared via in-situ polycondensation of polyamic acid

Polyamic acid (PAA) is a flexible polymer and has abundant valuable hydrophilic groups. Herein, we developed an ultra-low pressure ultrafiltration (UF) membrane by integrating PAA into the polyethersulfone (PES) matrix via the "in-situ polycondensation" method. PAA was well compatible with PES and distributed uniformly in the membrane. The introduction of PAA improved membrane hydrophilicity. Meanwhile, the membrane pore structures were also refined. The membrane exhibited an excellent permeability under ultra-low pressure due to its improvement of hydrophilicity and pore structures. Under 0.3 bar, compare with the water flux of PES membrane, PES/PAA membrane improved nearly 2 times (571.05 L/(m²·h)), with a high BSA rejection (≥90%). Even under a lower pressure, 0.1 bar, >300 L/(m²·h) still can be achieved. Interestingly, the membrane we developed could maintain a high performance after drying, and then is very suitable for dry preservation. PES/PAA membrane showed a high oil removal (≥92%) and could remove oil from water effectively. Besides, the membrane exhibited excellent anti-oil-fouling properties. The flux recovery rate of PES/PAA (70.0%) far exceeds that of PES (37.9%) after three filtration and cleaning cycles. The membrane we developed is very valuable in oily wastewater treatment.

The micro-, submicron-, and nanoplastic hunt: A review of detection methods for plastic particles

Plastic particle pollution has been shown to be almost completely ubiquitous within our surrounding environment. This ubiquity in combination with a variety of unique properties (e.g. density, hydrophobicity, surface functionalization, particle shape and size, transition temperatures, and mechanical properties) and the ever-increasing levels of plastic production and use has begun to garner heightened levels of interest within the scientific community. However, as a result of these properties, plastic particles are often reported to be challenging to study in complex (i.e. real) environments. Therefore, this review aims to summarize research generated on multiple facets of the micro- and nanoplastics field; ranging from size and shape definitions to detection and characterization techniques to generating reference particles; in order to provide a more complete understanding of the current strategies for the analysis of plastic particles. This information is then used to provide generalized recommendations for researchers to consider as they attempt to study plastics in analytically complex environments; including method validation using reference particles obtained via the presented creation methods, encouraging efforts towards method standardization through the reporting of all technical details utilized in a study, and providing analytical pathway recommendations depending upon the exact knowledge desired and samples being studied.

Fabrication of Zwitterion TiO2 Nanomaterial-Based Nanocomposite Membranes for Improved Antifouling and Antibacterial Properties and Hemocompatibility and Reduced Cytotoxicity

Although zwitterion nanomaterials exhibit outstanding antifouling property, hemocompatibility, and antibacterial activity, their poor solubility in organic solvents limits their practical applications. In the present study, natural lysine (amino acids) was surface-grafted onto one-dimensional (1D) TiO2 nanofibers (NFs) through an epoxy ring opening in which the 3-glycidyloxypropyl (dimethoxy) methyl silane was used as a coupling agent. Chemical binding and morphological studies, such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy, were conducted to confirm the successful grafting of lysine onto the TiO2 NFs. The lysine-grafted TiO2 NF-polyethersulfone (PES) membrane induced electrostatic interactions and increased the surface charges from -28 to 16 mV in ζ-potential analysis. The lysine exhibited zwitterion characteristics owing to the presence of amino (cations) and carboxyl (anions) functional groups. Moreover, the modified TiO2-PES zwitterion membranes exhibited good water flux performances compared to the pristine membrane. ZT-4 membrane displayed the highest water fluxand bovine serum albumin (BSA) rejection of 137 ± 1.8 L m-2 h-1 and 94 ± 1%, respectively. The cell viability results revealed that the zwitterion PES membrane had excellent biocompatibility with peripheral blood mononuclear cells. The present work offers a convenient strategy to improve the hydrophilicity, antifouling property, and hemocompatibility of modified TiO2-PES zwitterion membranes for their biomedical and blood-contacting applications such as hemodialysis.

Improving Immunoassay Performance with Cleavable Blocking of Microarrays

Among the key issues that are commonly associated with the development of microarray-based assays are nonspecific binding and diffusion constraints. Here we present a novel strategy addressing both of these challenges simultaneously. The essence of the method consists in blocking the microarray surface with a blocking agent containing a perfluoroalkyl chain and a disulfide linker. The resulting surface is hydrophobic, and no immiscible liquid layer remains on it upon cyclically draining and replenishing the sample solution, ensuring an efficient mass transfer of an analyte onto a microarray. Prior to the signal detection procedure, disulfide bonds are chemically cleaved, and the perfluoroalkyl chains are removed from the microarray surface along with nonspecifically adsorbed proteins, resulting in extremely low background. Using conventional fluorescent detection, we show a 30-fold increase in signal/background ratio compared to a common epoxy-modified glass substrate. The combination of this technique with magnetic beads detection results in a simple and ultrasensitive cholera toxin (CT) immunoassay. The limit of detection (LOD) is 1 fM, which is achieved with an analyte binding time of 1 h. Efficient mass transfer provides highly sensitive detection of whole virus particles despite their low diffusion coefficient. The achieved LOD for vaccinia virus is 10⁴ particles in 1 mL of sample. Finally, we have performed for the first time the simultaneous detection of whole virus and CT protein biomarker in a single assay. The developed technique can be used for multiplex detection of trace amounts of pathogens of various natures.

Impacts of microplastics on organotins' photodegradation in aquatic environments

Microplastics are ubiquitous in natural waters and affect the environmental fate of hydrophobic organic micropollutants. This study evaluated the impacts of four microplastics, polypropylene (PP), polyethylene (PE), polystyrene (PS) and polymethyl methacrylate (PMMA), on the photodegradation of organotin compounds (OTCs) under UV₃₆₅ irradiation (2.3 ± 0.1 W m^-2). The experiments were performed by mixing PP, PE, PS or PMMA microparticles with tri-organotins in artificial seawater. The photodegradation of OTCs in microplastic suspensions was influenced by the absorptivity onto microplastics. The decomposition rate of tributyltin (TBT) in UV-irradiated PP suspensions was greater than trimethyltin (TMT) and triphenyltin (TPhT) (p < 0.01). The adsorption capacities of OTCs (e.g., TBT) on PP particle surfaces were significantly lower than those on PE surfaces (p < 0.05) but similar with those on PMMA due to the different surface areas, shapes, and surface hydrophobicity of microplastics. TBT degraded faster (9.1%) in PS than in PMMA suspension (11.2%) within 240 min, respectively. However, only less than 5.4% was photodegraded in PP suspension due to the light scattering or absorption of the large sized PP particles. This study provided new insight into the impacts of microplastics on photodegradation of micropollutants in natural waters.

Separation, characterization and identification of microplastics and nanoplastics in the environment

Microplastics (MPs) have globally been detected in aquatic and marine environments, which has raised scientific interests and public health concerns during the past decade. MPs are those polymeric particles with at least one dimension <5 mm. MPs possess complex physicochemical properties that vary their mobility, bioavailability and toxicity toward organisms and interactions with their surrounding pollutants. Similar to nanomaterials and nanoparticles, accurate and reliable detection and measurement of MPs or nanoplastics and their characteristics are important to warrant a comprehensive understanding of their environmental and ecological impacts. This review elaborates the principles and applications of diverse analytical instruments or techniques for separation, characterization and quantification of MPs in the environment. The strength and weakness of different instrumental methods in separation, morphological, physical classification, chemical characterization and quantification for MPs are critically compared and analyzed. There is a demand for standardized experimental procedures and characterization analysis due to the complex transformation, cross-contamination and heterogeneous properties of MPs in size and chemical compositions. Moreover, this review highlights emerging and promising characterization techniques that may have been overlooked by research communities to study MPs. The future research efforts may need to develop and implement new analytical tools and combinations of hyphenated technologies to complement respective limitations of detection and yield reliable characterization information for MPs. The goal of this critical review is to facilitate the research of plastic particles and pollutants in the environment and understanding of their environmental and human health effects.

A bioinspired lubricant infused surface with transparency, hot liquid boiling resistance and long-term stability for food applications

Inspired by the Nepenthes pitcher plant, the HAP and oleic acid prepared Lubricant Infused Surface (LIS) that exhibits liquid repellency and slipperiness has huge potential in various fields.

Visualization of the Stimuli-responsive Surface Behavior of Functionalized Wood Material by Chemical Force Microscopy

The hierarchical and porous wood structure provides a stable scaffold to design functionalized lignocellulosic materials with extended properties by chemical modification techniques. However, proper nanoscale characterization methods for these novel materials are needed to confirm the presence of the added functionality and to locate the introduced functional groups with high spatial resolution. Chemical force microscopy is a suitable characterization method to distinguish chemical surface characteristics by scanning the samples surface with a functionalized tip. We report the application of this nanotechnology method on both, unmodified and functionalized wood samples to confirm the thermo-responsive behavior of poly(N-isopropylacrylamide) (PNIPAM) modified spruce wood. By performing force measurements on ultra-microtomed surfaces, adhesion force differences on the analysed structure are monitored and reveal the location and functionality of introduced functional groups. The modified samples are scanned below and above their lower critical solution temperature with a hydrophobic tip in aqueous media to observe adhesion changes. Additionally, confocal Raman microscopy support the chemical force microscopy measurements by revealing the success of the modification and the distribution of PNIPAM across the sample cross-sections. The results show that PNIPAM is mainly located in wood cell wall areas close to the lumen in early- and transitionwood.

Manipulation of Grafting Location via Photografting To Fabricate High-Performance Ethylene Vinyl Alcohol Copolymer Membrane for Protein Separation

Ethylene vinyl alcohol copolymer (EVAL) membrane has great potential for applications in protein separation and purification, but the uncontrollable distribution of grafting location when membranes are modified by the grafting method limits the membrane performance. Herein, an effective strategy for controlling the distribution of grafting location was designed to fabricate a high-performance EVAL membrane via photografting. The UV intensity through the membranes was weakened when the local concentration of the photoinitiator benzophenone (BP) on the topside of the membrane increased; thus, the grafting location inside the EVAL membrane changed from homogenous to asymmetric distribution based on the UV absorbability of BP. The grafting inside the membrane pores can be promoted when the loose and porous surface of the EVAL membrane was used as the UV-facing side. More importantly, the varied distribution of grafting location played different roles on improving the membrane performance. For protein binding, the limited convection in the membrane bed was avoided, and the desorption efficiency could be improved when the grafting location enriched inside the membrane pores. For protein filtration, the antifouling properties of the EVAL membrane were enhanced when the grafting location enriched on the topside. This research offers a novel approach to achieve controllable grafting location distribution of membranes and provides a perspective to design the high-performance EVAL membranes for protein separation.

Bioinspired Edible Lubricant-Infused Surface with Liquid Residue Reduction Properties

Inspired by nature's water-repellent plants, the superhydrophobic surface (SHS) and the lubricant-infused surface (LIS) possess potentials in various fields of application. In particular, the edible SHS and the edible LIS (ELIS) are suitable for the role of high-valued liquid food residue reduction. In this study, the ELIS was introduced through a facile spray method and direct lubricant infusion. Four types of ELISs were fabricated: carnauba wax with ethyl oleate infusion, carnauba wax with cooking oil infusion, beeswax with ethyl oleate infusion, and beeswax with cooking oil infusion. The carnauba wax-coated ELIS has better slipperiness, while the beeswax-coated ELIS has better transparency. The ethyl oleate-infused ELIS possesses ELIS to SHS transformable ability, and the cooking oil-infused ELIS also possesses better slipperiness and has the affordable advantage. Moreover, the material selection of ELIS is accessible, renewable, green, recyclable, and edible. The results illustrated that ELIS has advantages of long-term effectiveness and impact resistance over edible SHS and indicated that the ELIS can be facilitated for the manufacture of a multifunctional liquid residue reduction surface with food safety assurance.

Measurement of the surface hydrophobicity of engineered nanoparticles using an atomic force microscope

A scanning probe method based on atomic force microscopy (AFM) was used to probe the nanoscale hydrophobicity of nanomaterials in liquid environments.