Highly oriented Langmuir-Blodgett film of silver cuboctahedra as an effective matrix-free sample plate for surface-assisted laser desorption/ionization mass spectrometry

Recent Progress in the Applications of Langmuir-Blodgett Film Technology

Langmuir-Blodgett (LB) film technology is an advanced technique for the preparation of ordered molecular ultra-thin films at the molecular level, which transfers a single layer of film from the air/water interface to a solid substrate for the controlled assembly of molecules. LB technology has continually evolved over the past century, revealing its potential applications across diverse fields. In this study, the latest research progress of LB film technology is reviewed, with emphasis on its latest applications in gas sensors, electrochemical devices, and bionic films. Additionally, this review evaluates the strengths and weaknesses of LB technology in the application processes and discusses the promising prospects for future application of LB technology.

Direct detection of dithiocarbamate fungicides by SALDI/MS using porous TiC ceramic powder as a substrate

Dithiocarbamate fungicides (DTCs) have been widely used all over the world. Some of them show toxicities, such as growth toxicity and teratogenicity. Therefore, the analysis of DTCs in environments or crops is very significant. However, their direct and individual analysis was difficult, because most of them are metal complex compounds and have macromolecular properties and a low solubility in water or organic solvents. In the conventional analytical methods for DTCs, the total amount of DTCs was obtained by the quantification of the derivatives of the ligand or by measuring the carbon disulfide formed by the decomposition of the fungicides. Surface assisted laser desorption (SALDI)/MS can detect various compounds, such as metal complexes and macromolecules, present in a nanostructured substrate. The porous titanium carbide (TiC) ceramic powder shows adsorptive properties to various substances and can be used as a substrate for SALDI/MS. In this study, a method for the individual and direct detection of dithiocarbamate pesticides by SALDI/MS using porous TiC ceramics as a substrate has been developed. The dithiocarbamate fungicide was mixed with the porous TiC powder in a mortar, and the mixture was analyzed by SALDI/MS. The deprotonated ion of the ethylene-bis-dithiocarbamate complex, mancozeb or zineb, was detected in the negative ion mode. For the dimethyldithiocarbamate complexes, ferbam and ziram, the ion of the eliminated dithiocarbamate ligand was detected in the positive ion mode. Calibration curves by the present method for Manzeb showed good linearity by using an internal standard material. Based on these results, we concluded that this method is useful for the analysis of DTCs.

Plasmonic Au@Ag Core-Shell Nanoisland Film for Photothermal Inactivation and Surface-Enhanced Raman Scattering Detection of Bacteria

Plasmonic metal nanomaterials have been extensively investigated for their utilizations in biomedical sensing and treatment. In this study, plasmonic Au@Ag core-shell nanoisland films (Au@AgNIFs) were successfully grown onto a glass substrate using a seed-mediated growth procedure. The nanostructure of the Au@AgNIFs was confirmed through scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and atomic force microscopy (AFM). The UV-Vis spectra of the Au@AgNIFs exhibited a broad absorption in the visible range from 300 to 800 nm because of the surface plasmon absorption. Under simulated sunlight exposure, the temperature of optimal Au@AgNIF was increased to be 66.9 °C to meet the requirement for photothermal bacterial eradication. Furthermore, the Au@AgNIFs demonstrated a consistent photothermal effect during the cyclic on/off exposure to light. For photothermal therapy, the Au@AgNIFs revealed superior efficiency in the photothermal eradication of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). With their unique nanoisland nanostructure, the Au@AgNIFs exhibited excellent growth efficiency of bacteria in comparison with that of the bare glass substrate. The Au@AgNIFs were also validated as a surface-enhanced Raman scattering (SERS) substrate to amplify the Raman signals of E. coli and S. aureus. By integrating photothermal therapy and SERS detection, the Au@AgNIFs were revealed to be a potential platform for bacterial theranostics.

Host-Guest Self-Assembled Interfacial Nanoarrays for Precise Metabolic Profiling

Accurate and rapid metabolic profiling of cerebrospinal fluid (CSF) is urgently needed but remains challenging for clinical diagnosis of central nervous system diseases and biomarker discovery. Matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) holds promise for metabolic analysis. Its low signal reproducibility, however, severely restricts acquisition of quantitative MS data in clinical practice. Herein, a multifunctional self-assembled AuNPs array (MSANA)-based LDI-MS platform for direct amino acids analysis and metabolic profiling in patient CSF samples is developed. MSANA featuring a highly ordered and closely packed two-dimensional nanostructure permits capture and direct analysis of aromatic amino acids by LDI-MS with high selectivity and micromolar sensitivity. Meanwhile, the MSANA-based LDI-MS platform exhibits excellent reproducibility (RSD < 10%), largely outperforming the direct matrix spotting approach widely used now (RSD < 44%). The platform is successfully used in metabolic profiling of CSF (1 µL) within minutes for discrimination of medulloblastoma patients from non-tumor controls. Taken together, the MSANA-based LDI-MS platform shows potential clinical values toward large-scale metabolic diagnostics and pathogenic mechanism study.

In Situ Self-Assembled Formation of Nitrogen-Rich Ag@Ti3C2 Film for Sensitive Detection and Spatial Imaging of Pesticides with Laser Desorption/Ionization Mass Spectrometry (LDI-MS)

Pesticide residues are hazardous to human health; thus, developing a rapid and sensitive method for pesticide detection is an urgent need. Herein, novel nitrogen-rich Ag@Ti₃C₂ (Ag@N-Ti₃C₂) was synthesized via an ecofriendly, ultraviolet-assisted strategy, followed by in situ formation of a highly homogeneous film on target carriers via a facile water evaporation-induced self-assembly process. Ag@N-Ti₃C₂ shows greater surface area, electrical conductivity, and thermal conductivity than Ti₃C₂. This Ag@N-Ti₃C₂ film overcomes the limitations of conventional matrixes and allows laser desorption/ionization mass spectrometry (LDI-MS) to provide fast and high-throughput analysis of pesticides (e.g., carbendazim, thiamethoxam, propoxur, dimethoate, malathion, and cypermethrin) with ultrahigh sensitivity (detection limits of 0.5-200 ng/L), enhanced reproducibility, extremely low background, and good salt tolerance. Furthermore, the levels of pesticides were quantified with a linear range of 0-4 μg/L (R² > 0.99). This Ag@N-Ti₃C₂ film was used for high-throughput analysis of pesticides spiked in traditional Chinese herbs and soft drink samples. Meanwhile, high-resolution Ag@N-Ti₃C₂ film-assisted LDI-MS imaging (LDI MSI) was used to successfully explore spatial distributions of xenobiotic pesticides and other endogenous small molecules (e.g., amino acids, saccharides, hormones, and saponin) in the roots of plants. This study presents the new Ag@N-Ti₃C₂ self-assembled film equably deposits on the ITO slides and provides a dual platform for pesticide monitoring and has the advantages of high conductivity, accuracy, simplicity, rapid analysis, minimal sample volume requirement, and an imaging function.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2017-2018

This review is the tenth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2018. Also included are papers that describe methods appropriate to glycan and glycoprotein analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, new methods, matrices, derivatization, MALDI imaging, fragmentation and the use of arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides, and biopharmaceuticals. Most of the applications are presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions, and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and highlights the impact that MALDI imaging is having across a range of diciplines. MALDI is still an ideal technique for carbohydrate analysis and advancements in the technique and the range of applications continue steady progress.

Calcium Phosphate Nanoclusters for the Repair of Tooth Enamel Erosion

The artificial repair of tooth enamel is still an urgent requirement because it has a complicated and well-arranged structure. Herein, calcium phosphate nanoclusters (CaP NCs) were synthesized, via a facile approach, for application in the repair of tooth enamel erosion. Structural and optical characterizations validated the successful preparation of spherical CaP NCs, with an average size of 2.1 ± 0.11 nm. By evaporating the ethanol and triethylamine (TEA) solvents, pure CaP was produced, which was further used to repair the tooth enamel. Simulated caries lesions were achieved via phosphoric acid etching to cause damage to enamel rods. After repair, the damaged enamel rods were directly covered with CaP. According to microhardness testing, after repair with CaP NCs, the hardness value of the tooth enamel with acid etching increased to a similar level to that of normal tooth enamel. The results of the microhardness test indicated that CaP NCs revealed great potential for repairing tooth enamel erosion. Our work demonstrates a promising potential for treating the early stage of tooth erosion with CaP NCs. Based on these findings, we believe that stable CaP NCs can be employed as a precursor for the tunable, effective repair of tooth enamel in the near future.

Monolithic Gold Nanoparticles/Thiol-β-cyclodextrin-Functionalized TiO2 Nanowires for Enhanced SALDI MS Detection and Imaging of Natural Products

Surface-assisted laser desorption/ionization mass spectrometry (SALDI MS) has been successfully applied in the analysis of various small molecules. In this work, gold nanoparticles/thiol-β-cyclodextrin-functionalized TiO₂ nanowires (AuNPs/SH-β-CD-TiO₂ NWs) were prepared to enhance the performance of SALDI MS and mass spectrometry imaging (MSI). A monolithic TiO₂ film was first grown on an indium tin oxide (ITO) glass slide via a modified sol-gel method and treated in an alkaline environment to form nanowires. TiO₂ NWs were chemically modified by SH-β-CD for immobilizing AuNPs densely and strongly. Compared with the conventional organic matrix 2,5-dihydroxybenzoic acid (DHB), the prepared AuNPs/SH-β-CD-TiO₂ NWs showed superior performances on detection sensitivity, repeatability, and analyte coverage. Analytes typically detectable with negative-ion matrix-assisted laser desorption/ionization (MALDI) MS could also be observed using AuNPs/SH-β-CD-TiO₂ NWs in the positive ion mode. Its successful usage efficiently enhanced the SALDI MS detection of various small molecules such as carbohydrates, fatty acids, and bile acids in the positive ion mode. The developed SALDI substrate was further used to characterize and discriminate the natural and in vitro cultured Calculus Bovis, as well as natural and artificial Moschus. Furthermore, the spatial distribution of several natural products in spearmint leaves and potato tubers was explored by tissue imprinting and deposition on the AuNPs/SH-β-CD-TiO₂ NW surface for SALDI MSI in dual-polarity mode, respectively. The wide application and satisfied detection sensitivity make AuNPs/SH-β-CD-TiO₂ NWs ideal for SALDI MS and MSI of various natural products.

Nanostructured Substrates as Matrices for Surface Assisted Laser Desorption/Ionization Mass Spectrometry: A Progress Report from Material Research to Biomedical Applications

Within the past two decades, the escalation of research output in nanotechnology fields has boosted the development of novel nanoparticles and nanostructured substrates for use as matrices in surface assisted laser desorption/ionization mass spectrometry (SALDI-MS). The application of nanomaterials as matrices, rather than organic matrices, offers remarkable characteristics that allow the analysis of small molecules with fewer matrix interfering peaks, and share higher detection sensitivity, specificity, and reproducibility. The technological advancement of SALDI-MS has in turn, propelled the application of the analytical technique in the field of biomedical analysis. In this review, the properties and fabrication methods of nanostructured substrates in SALDI-MS such as metallic-, carbon-, and silicon-based nanostructures, quantum dots, metal-organic frameworks, and covalent-organic frameworks are described. Additionally, the latest progress (most within 5 years) of biomedical applications in small molecule, large biomolecule, and MS imaging analysis including metabolite profiling, drug monitoring, bacteria identification, disease diagnosis, and therapeutic evaluation are demonstrated. Key parameters that govern nanomaterial's SALDI efficiency in biomolecule analysis are also discussed. Finally, perspectives of the future development are given to provide a better advancement and promote practical application in clinical MS.

Engineering of nanomaterials for mass spectrometry analysis of biomolecules

Mass spectrometry (MS) based analysis has received intense attention in diverse biological fields. However, direct MS interrogation of target biomolecules in complex biological samples is still challenging, due to the extremely low abundance and poor ionization potency of target biological species. Innovations in nanomaterials create new auxiliary tools for deep and comprehensive MS characterization of biomolecules. More recently, growing research interest has been directed to the compositional and structural engineering of nanomaterials for enriching target biomolecules prior to MS analysis, enhancing the ionization efficiency in MS detection and designing biosensing nanoprobes in sensitive MS readout. In this review, we mainly focus on the recent advances in the engineering of nanomaterials towards their applications in sample pre-treatment, desorption/ionization matrices and ion signal amplification for MS profiling of biomolecules. This review will provide a toolbox of nanomaterials for researchers devoted to developing analytical methods and practical applications in the biological MS field.

Facet-dependent gold nanocrystals for effective photothermal killing of bacteria

Gold-based plasmonic nanocrystals have been extensively developed for noninvasive photothermal therapy. In this study, gold nanorods (AuNRs) with (200) plane and gold nanobipyramids (AuNBPs) with (111) plane were utilized as photothermal agents for noninvasive photothermal therapy. With longitudinal surface plasma bands at ~808 nm, both of AuNRs and AuNBPs revealed photothermal capability and reversibility of laser response under 808-nm near-infrared (NIR) laser irradiation. Moreover, AuNBPs with (111) plane exhibited higher photothermal performance than that of AuNRs with (200) plane under NIR laser irradiation. Density function theory (DFT) simulations revealed that water adsorption energy followed the order Au(111) < Au(100), indicating that the water was easily desorbed on the Au(111) surface for photothermal heating. For the photothermal therapy against Escherichia coli (E. coli), AuNBPs also exhibited higher efficiency compared to that of AuNRs under NIR laser irradiation. Combination of experimental photothermal therapy and DFT simulations demonstrated that AuNBPs with (111) plane were better photothermal agents than that of AuNRs with (100) plane.

Self-Assembled Au Nanoparticle Arrays for Precise Metabolic Assay of Cerebrospinal Fluid

Precise and rapid monitoring of metabolites in biofluids is a desirable but unmet goal for disease diagnosis and management. Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) exhibits advantages in metabolite analysis. However, the low accuracy in quantification of the technique limits its transformation to clinical usage. We report herein the use of Au nanoparticle arrays self-assembled at liquid-liquid interfaces for mass spectrometry (MS)-based quantitative biofluids metabolic profiling. The two-dimensional arrays feature uniformly and closely packed Au nanoparticles with 3 nm interparticle gaps. The experimental study and theoretical simulation show that the arrays exhibit high photothermal conversion and heat confinement effects, which enhance the laser desorption/ionization efficacy. With the nanoscale roughness, the AuNP arrays as laser desorption/ionization substrates can interrupt the coffee-ring effect during droplet evaporation. Therefore, high reproducibility (RSD <5%) is obtained, enabling accurate quantitative analysis of diverse metabolites from 1 μL of biofluids in seconds. By quantifying glucose in the cerebrospinal fluid (CSF), it allows us to identify patients with brain infection and rapidly evaluate the clinical therapy response. Consequently, the method shows potential in advanced metabolite analysis and biomedical diagnostics.

Silver-109/Silver/Gold Nanoparticle-Enhanced Target Surface-Assisted Laser Desorption/Ionisation Mass Spectrometry-The New Methods for an Assessment of Mycotoxin Concentration on Building Materials

This study aimed to detect and quantify mycotoxins on building materials using innovative laser mass spectroscopy methods—silver-109/silver/gold nanoparticle-enhanced target surface-assisted laser desorption/ionisation mass spectrometry (¹⁰⁹AgNPs, AgNPs and AuNPs SALDI). Results from SALDI-type methods were also compared with commonly used matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. Standards of seven moulds mycotoxin in a final concentration of 100 µg/mL for patulin, citrinin, 3-nitropropionic acid, alternariol and 20 µg/mL for sterigmatocystin, cyclopiazonic acid, roquefortine C in the mixture were tested in pure solutions and after extraction from the plasterboards. Among the studied SALDI-type method, the lowest detection limits and the highest signal intensity of the mycotoxins tested were obtained with the use of ¹⁰⁹AgNPs SALDI MS. The ¹⁰⁹AgNPs method may be considered as an alternative to the currently most frequently used method MALDI MS and also liquid chromatography tandem mass spectrometry LC-MS/MS for mycotoxin determination. Future studies should attempt to use these methods for mass spectrometry imaging (MSI) to evaluate spatial distribution and depth of mycotoxin penetration into building materials.

Unidirectional Langmuir-Blodgett-Mediated Alignment of Polyaniline-Functionalized Multiwalled Carbon Nanotubes for NH3 Gas Sensor Applications

Herein, we report the formation of well-aligned ultrathin films of polyaniline-functionalized multiwalled carbon nanotubes (PANI@MWCNTs) with a high orientational order over a macroscopic area by Langmuir-Blodgett (LB) technique and its enhanced ammonia gas sensing properties. During the interfacial assembly process, the PANI@MWCNTs gradually align to form small ordered blocks at the air-water interface, which further organize as a well-defined oriented monolayer. The orientation and alignment of PANI@MWCNTs in Langmuir films at the air-water interface were systematically studied as a function of interface temperature using transmission electron microscopic analysis. Surface functionalization of MWCNTs with polyaniline was found to overcome the 3D aggregation of CNTs leading to an oriented assembly of PANI@MWCNTs. The formation and stability of the compact monolayer/multilayer structures of PANI@MWCNTs-based LB films have been extensively studied using a π-A isotherm analysis and thermodynamic approach. For the first time, such highly oriented LB films of PANI-functionalized MWCNTs have been employed for ammonia gas sensing applications at room temperature. The sensor was found to exhibit outstanding sensitivity toward NH₃ at room temperature compared to random networks, which is attributed to the directed electron transport through the aligned PANI@MWCNTs. The ultrathin LB film allows fast analyte diffusion due to the adequate molecular accommodation in the oriented assembly of the active sensing layer. The large-scale alignment of PANI@MWCNTs demonstrated in this investigation would enable the fabrication of high-density MEMS (micro-electromechanical system)-based nanoscale sensor arrays for high-performance NH₃ gas sensor applications.

Porous TiO2 Film Immobilized with Gold Nanoparticles for Dual-Polarity SALDI MS Detection and Imaging

Surface-assisted laser desorption/ionization (SALDI) mass spectrometry (MS) has become an attractive complementary approach to matrix-assisted laser desorption/ionization (MALDI) MS. SALDI MS has great potential for the detection of small molecules because of the absence of applied matrix. In this work, a functionalized porous TiO₂ film immobilized with gold nanoparticles (AuNPs-FPTDF) was prepared to enhance SALDI MS performance. The porous TiO₂ films were prepared by the facile sol-gel method and chemically functionalized for dense loading of AuNPs. The prepared AuNPs-FPTDF showed superior performance in the detection and imaging of small molecules in dual-polarity modes, with high detection sensitivity in the low pmol range, good repeatability, and low background noise compared to common organic MALDI matrixes. Its usage efficiently enhanced SALDI MS detection of various small molecules, such as amino acids and neurotransmitters, fatty acids, saccharides, alkaloids, and flavonoids, as compared with α-cyano-4-hydroxycinnamic acid, 9-aminoacridine, and the three precursor substrates of AuNPs-FPTDF. In addition, the blood glucose level in rats was successfully determined from a linearity concentration range of 0.5-9 mM, as well as other biomarkers in rat serum with SALDI MS. More importantly, the spatial distribution of metabolites from the intact flowers of the medicinal plant Catharanthus roseus was explored by using the AuNPs-FPTDF as an imprint SALDI MS substrate in dual-polarity modes. These results demonstrate wide applications and superior performances of the AuNPs-FPTDF as a multifunctional SALDI surface with enhanced detection sensitivity and imaging capabilities.

Surface-enhanced laser desorption/ionization mass spectrometry for rapid analysis of organic environmental pollutants by using polydopamine nanospheres as a substrate

Polydopamine nanospheres (PDA) were designed to serve as a new substrate for surface-enhanced desorption/ionization mass spectrometry (SELDI-MS). Compared with conventional organic matrices, the PDA substrate showed superior LDI performance for analyzing a wide variety of environmental pollutants, including polycyclic aromatic hydrocarbons, bisphenols, benzophenones, sulfonamides, perfluorinated compounds and estrogens. Benzoapyrene was used to evaluate the ability of quantitative analysis and its corresponding limit of detection (LOD) of as low as 0.1 ng was achieved. High sensitivity and good reproducibility of PDA-based SELDI-MS allowed us to determine ultratrace PAHs in airborne particulate matters (PM_2.5), and the corresponding concentration of BaP in different PM_2.5 were 5.32, 8.97 and 9.79 ng m^-3. Significantly, PDA exhibits the characteristics of simple synthesis, low cost, non-toxicity and less matrix interference, which provides the possibility for the sensitive analysis of organic small molecule pollutants at low concentrations in complex environmental samples.

Rapid Detection of Anabolic and Narcotic Doping Agents in Saliva and Urine By Means of Nanostructured Silicon SALDI Mass Spectrometry

Novel doping agents and doping strategies are continually entering the market, placing a burden on analytical methods to detect, adapt, and respond to subtle changes in the composition of biological samples. Therefore, there is a growing interest in rapid, adaptable, and ideally confirmatory analytical methods for the fight against doping. Nanostructured silicon (nano-Si)-based surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) can effectively address this need, allowing fast and sensitive detection of prohibited compounds used in sport doping. Here, we demonstrate the detection of growth hormone peptides, anabolic-androgenic steroids, and narcotics at low concentrations directly from biological matrices. Molecular confirmation was performed using the fragmentation data of the structures, obtained with the tandem mass spectrometry capabilities of the SALDI instrument. The obtained data were in excellent agreement with those obtained using leading triple quadrupole liquid chromatography-mass spectrometry instruments. Furthermore, nano-Si SALDI-MS has the capacity for high-throughput analysis of hundreds of biological samples, providing opportunities for real-time MS analysis at sporting events.

Preparation and comparison of Fe3O4@graphene oxide nanoclusters for analysis of glimepiride in urine by surface-assisted laser desorption/ionization time-of-flight mass spectrometry

Graphene oxide (GO) has the ability to absorb certain compounds, and it can be modified with functional groups for different purposes; for instance, iron oxide (IO) nanoparticles can be used to concentrate analyte by a magnet. Recently, many kinds of GO have been developed, such as single-layer GO (SLGO), two-to-four layers of GO (i.e., few-layer GO, FLGO^2-4), and four-to-eight layers of GO (i.e., multi-layer GO, MLGO^4-8). However, the abilities of these layered GO coated with IO nanoparticles have not been investigated. In this study, we conducted a novel analysis of glimepiride by using layered GO-coated magnetic clusters of IO nanoparticles that were synthesized through a simple and facile emulsion-solvent evaporation method. The methodology is based on (i) enrichment of glimepiride using the layered GO-coated magnetic clusters of IO nanoparticles (IO@SLGO, IO@FLGO^2-4, and IO@MLGO^4-8), and (ii) rapid determination using magnetic cluster-based surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOFMS). We found that IO@MLGO^4-8, the magnetic cluster with the greatest number of GO layers, had the best limit of detection (28.6 pmol/μL for glimepiride). The number of GO layers played a significant role in increasing the sensitivity of the SALDI-MS, indicating that the size of GO in the magnetic clusters contributed to the desorption/ionization efficiency. To the best of our knowledge, this is the first study to enrich glimepiride using magnetic clusters of different GO types and to show that the glimepiride in HLB purified urine adsorbed by magnetic clusters can be analyzed by SALDI-TOFMS.

Ultrathin Homogenous AuNP Monolayers as Tunable Functional Substrates for Surface-Assisted Laser Desorption/Ionization of Small Biomolecules

A series of ultrathin, homogenous gold nanoparticle (AuNP) substrates for surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) were prepared using a simple air/water interface approach. These SALDI substrates enabled soft ionization and provided significant improvements in terms of signal intensities and reduced background levels in comparison to other AuNP morphologies for different analytes such as fatty acids, peptides, amino acids, saccharides, and drugs. Through different microscopic and spectroscopic methods, we determined that the packing homogeneity of the [AuNP]_n substrates played a vital role in the efficiency of the SALDI process. We demonstrated that the signal intensities of the investigated analytes were readily optimized by manipulating the thickness of the [AuNP]_n substrates. The desorption/ionization efficiency increased as a function of the number of layers and then reached a saturation point. The optimized [AuNP]_n substrates not only exhibited high SALDI-MS desorption/ionization efficiencies but also showed excellent reproducibilities of the analyte signals.

High-Performance Sample Substrate of Gold Nanoparticle Multilayers for Surface-Assisted Laser Desorption/Ionization Mass Spectrometry

The development of a sample substrate with superior performance for desorption and ionization of analyte is the key issue to ameliorate the quality of mass spectra for measurements of small molecules in surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). Herein, the homogeneous sample substrate of gold nanoparticle multilayers (AuNPs-ML) with hexagonal lattice was successfully prepared by self-assembly technique. With strong surface plasmon resonance absorption and superior photothermal effect, the sample substrate of AuNPs-ML exhibited high signal sensitivity and low background noise for the detection of model analyte of glucose without additional matrixes in SALDI-MS. Furthermore, compared to merchant matrixes of α-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB), the sample substrate of AuNPs-ML was demonstrated to ameliorate the quality of mass spectra, including signal strength, background interference and signal/noise (S/N) ratio. The sucrose and tryptophan were also measured to show the extensive applications of AuNPs-ML sample substrate for the detections of small molecules in SALDI-MS. Most importantly, the remarkable reproducibility of glucose mass spectra with relative signal of 7.3% was obtained by the use of AuNPs-ML sample substrate for SALDI-MS. The homogeneous sample substrate of AuNPs-ML greatly improved the quality of mass spectra because of its strong absorption of laser energy, low specific heat, high heat conductivity and extraordinary homogeneity. We believe that AuNPs-ML could be a practical sample substrate for small molecule detection in SALDI-MS.

Recent advances in single-cell analysis by mass spectrometry

Cells are the most basic structural units that play vital roles in the functioning of living organisms. Analysis of the chemical composition and content of a single cell plays a vital role in ensuring precise investigations of cellular metabolism, and is a crucial aspect of lipidomic and proteomic studies. In addition, structural knowledge provides a better understanding of cell behavior as well as the cellular and subcellular mechanisms. However, single-cell analysis can be very challenging due to the very small size of each cell as well as the large variety and extremely low concentrations of substances found in individual cells. On account of its high sensitivity and selectivity, mass spectrometry holds great promise as an effective technique for single-cell analysis. Numerous mass spectrometric techniques have been developed to elucidate the molecular profiles at the cellular level, including electrospray ionization mass spectrometry (ESI-MS), secondary ion mass spectrometry (SIMS), laser-based mass spectrometry and inductively coupled plasma mass spectrometry (ICP-MS). In this review, the recent advances in single-cell analysis by mass spectrometry are summarized. The strategies of different ionization modes to achieve single-cell analysis are classified and discussed in detail.

Osteoporosis risk assessment using multilayered gold-nanoparticle thin film via SALDI-MS measurement

A powerful technique to detect bone biomarkers has been developed for assessment of osteoporosis at the early stage. Two-dimensional multilayered gold-nanoparticle thin film (MTF-AuNPs) was demonstrated as a promising test platform for detection of bone biomarker, hydroxyproline (HYP), measured by surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). With strong surface plasmon resonance and excellent homogeneity, facilely prepared, highly ordered, and large-scale MTF-AuNPs revealed high sensitivity of HYP in the SALDI-MS measurement without additional matrixes, such as α-cyano-4-hydroxycinnamic acid (CHCA) and 2,5-dihydroxybenzoic acid (DHB). Furthermore, the mass spectrum of HYP with MTF-AuNPs was significantly improved in signal intensity enhancement, background noise reduction, and signal-to-noise ratio amplification. The excellent reproducibility of HYP spectra with only 9.3% relative signal variation could be attributed to MTF-AuNPs' high absorbance at a wavelength of 337 nm, low heat capacity, superior thermal conductivity, and outstanding homogeneity. The calibration curve showed high linear correlation between mass spectrum intensity and HYP concentration in the range of 1 to 100 μM, covering the whole level in healthy people and osteoporosis patients. In particular, the serum sample was directly deposited onto the MTF-AuNP sample substrate without any pretreatment and its HYP concentration was then successfully determined. We believe that the combination of SALDI-MS and MTF-AuNP sample substrates would be a potential approach for bone biomarker detection in the osteoporosis risk assessment. Graphical abstract.

Disposable MoS2-Arrayed MALDI MS Chip for High-Throughput and Rapid Quantification of Sulfonamides in Multiple Real Samples

In this work, we demonstrate, for the first time, the development of a disposable MoS₂-arrayed matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) chip combined with an immunoaffinity enrichment method for high-throughput, rapid, and simultaneous quantitation of multiple sulfonamides (SAs). The disposable MALDI MS chip was designed and fabricated by MoS₂ array formation on a commercial indium tin oxide (ITO) glass slide. A series of SAs were analyzed, and clear deprotonated signals were obtained in negative-ion mode. Compared with MoS₂-arrayed commercial steel plate, the prepared MALDI MS chip exhibited comparable LDI efficiency, providing a good alternative and disposable substrate for MALDI MS analysis. Furthermore, internal standard (IS) was previously deposited onto the MoS₂ array to simplify the experimental process for MALDI MS quantitation. 96 sample spots could be analyzed within 10 min in one single chip to perform quantitative analysis, recovery studies, and real foodstuff detection. Upon targeted extraction and enrichment by antibody conjugated magnetic beads, five SAs were quantitatively determined by the IS-first method with the linear range of 0.5-10 ng/mL ( R² > 0.990). Good recoveries and repeatability were obtained for spiked pork, egg, and milk samples. SAs in several real foodstuffs were successfully identified and quantified. The developed method may provide a promising tool for the routine analysis of antibiotic residues in real samples.