Electro-oxidation of a cobalt based steel in LiOH: a non-noble metal based electro-catalyst suitable for durable water-splitting in an acidic milieu

Increased Readiness for Water Splitting: NiO-Induced Weakening of Bonds in Water Molecules as Possible Cause of Ultra-Low Oxygen Evolution Potential

The development of non-precious metal-based electrodes that actively and stably support the oxygen evolution reaction (OER) in water electrolysis systems remains a challenge, especially at low pH levels. The recently published study has conclusively shown that the addition of haematite to H2SO4 is a highly effective method of significantly reducing oxygen evolution overpotential and extending anode life. The far superior result is achieved by concentrating oxygen evolution centres on the oxide particles rather than on the electrode. However, unsatisfactory Faradaic efficiencies of the OER and hydrogen evolution reaction (HER) parts as well as the required high haematite load impede applicability and upscaling of this process. Here it is shown that the same performance is achieved with three times less metal oxide powder if NiO/H2SO4 suspensions are used along with stainless steel anodes. The reason for the enormous improvement in OER performance by adding NiO to the electrolyte is the weakening of the intramolecular O─H bond in the water molecules, which is under the direct influence of the nickel oxide suspended in the electrolyte. The manipulation of bonds in water molecules to increase the tendency of the water to split is a ground-breaking development, as shown in this first example.

Recent advances in the role of MXene based hybrid architectures as electrocatalysts for water splitting

The development of non-noble metal based and cost-effective electrocatalysts for water splitting has attracted significant attention due to their potential in production of clean and green hydrogen fuel. Discovered in 2011, a family of two-dimensional transition metal carbides, nitrides, and carbonitrides, have demonstrated promising performance as electro catalysts in the water splitting process due to their high electrical conductivity, very large surface area and abundant catalytic active sites. However, their-long term stability and recyclability are limited due to restacking and agglomeration of MXene flakes. This problem can be solved by combining MXene with other materials to create their hybrid architectures which have demonstrated higher electrocatalytic performance than pristine MXenes. Electrolysis of water encompasses two half-cell reactions, hydrogen evolution reaction (HER) at the cathode and oxygen evolution reaction (OER) at the anode. Firstly, this concise review explains the mechanism of water splitting. Then it provides an overview of the recent advances about applications of MXenes and their hybrid architectures as HER, OER and bifunctional electrocatalysts for overall water splitting. Finally, the recent challenges and potential outlook in the field have been presented. This concise review may provide further understanding about the role of MXene-based hybrid architectures to develop efficient electrocatalysts for water splitting.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Free-Sustaining Three-Dimensional S235 Steel-Based Porous Electrocatalyst for Highly Efficient and Durable Oxygen Evolution

A novel oxygen evolution reaction (OER) catalyst (3 D S235-P steel) based on a steel S235 substrate was successfully prepared by facile one-step surface modification. The standard carbon-manganese steel was phosphorized superficially, which led to the formation of a unique 3 D interconnected nanoporous surface with a high specific area that facilitated the electrocatalytically initiated oxygen evolution reaction. The prepared 3 D S235-P steel exhibited enhanced electrocatalytic OER activities in the alkaline regime, as confirmed by a low overpotential (326 mV at a 10 mA cm^-2 ) and a small Tafel slope of 68.7 mV dec^-1 . Moreover, the catalyst was found to be stable under long-term usage conditions, functioning as an oxygen-evolving electrode at pH 13, as evidenced by the sufficient charge-to-oxygen conversion rate (faradaic efficiency: 82.11 and 88.34 % at 10 and 5 mA cm^-2 , respectively). In addition, it turned out that the chosen surface modification delivered steel S235 as an OER electrocatalyst that was stable under neutral pH conditions. Our investigation revealed that the high catalytic activities likely stemmed from the generated Fe/(Mn) hydroxide/oxohydroxides generated during the OER process. Phosphorization treatment therefore not only is an efficient way to optimize the electrocatalytic performance of standard carbon-manganese steel but also enables for the development of low-costing and abundant steels in the field of energy conversion.

Steel-based electrocatalysts for efficient and durable oxygen evolution in acidic media

Upon electro-oxidation in LiOH, Ni42 alloy was rendered in an OER electrocatalyst that efficiently and durably works in the acidic regime.