A flavonol-labelled cellulose fluorescent probe combined with composite fluorescent film imaging and smartphone technology for the detection of Fe3

Fe3+ is one of the most widely distributed and abundant elements on earth. Realizing efficient and real-time monitoring of Fe3+ is of great significance for the natural environment and the health of living organisms. In this paper, a flavonol-labelled cellulose-based fluorescent probe (ACHM) was synthesized by using dialdehyde cellulose (DAC) as the backbone and combining with flavonol derivatives (AHM - 1). The mechanism of recognizing Fe3+ was verified by characterizing the structure of ACHM by NMR, HRMS (High Resolution Mass Spectrometry), FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-ray Diffraction), TG (Thermogravimetry) and SEM (Scanning Electron Microscopy). The H2O solution of the probe ACHM showed good fluorescence properties. It has quenching fluorescence properties for Fe3+, with a low limit of detection (LOD) of 0.10 μM and a fast response time of only 20 s. In addition, in order to expand the application range of the probe, ACHM was prepared as a fluorescent composite film with an average tensile strength of 32.9 MPa and an average elongation at break of 3.39 %. It shows its superiority in mechanical properties. The probe also demonstrated its practical application value for detecting Fe3+ in smartphone imaging applications.

Cellulose/amylose derivatives bearing bulky substituents as reversible fluorescent sensors for detection of Fe3

Two novel cellulose and amylose derivatives bearing bulky tris(2-benzothienylformate) pendants (Cel-3 and Amy-3) were expeditiously prepared by one-step esterification. The fluorescent sensing performance of six polysaccharide derivatives, including Cel-3/Amy-3, and other four previously prepared benzothienyl- or benzofuranyl-phenylcarbamates of cellulose and amylose (Cel-1/Amy-1, Cel-2/Amy-2), were carefully evaluated using eight metal ions, including Co2+, K+, Na+, Li+, Hg2+, Ni2+, Ca2+ and Fe3+. All six derivatives exhibited excellent fluorescence quenching property to Fe3+ ions with high sensitivity and selectivity. Especially, the limit of detection of Amy-2 with benzofuranylphenylcarbamates for Fe3+ was 3.0 μM, much lower than the maximum contaminant level for Fe3+ in the drinking water. Additionally, the six bulky derivatives displayed the interesting fluorescence "turn-off" and "turn-on" observation, indicating a desirable reversibility for Fe3+ detection. The high anti-interference ability was also observed for detection of Fe3+ on the benzothienyl/benzofuranyl derivatives of cellulose and amylose in the combined system containing Co2+, K+, Na+, Li+, Hg2+, Ni2+ and Ca2+. It suggested that the obtained polysaccharide derivatives with bulky chromophores possessed good potentials for detection of Fe3+ as high-efficient fluorescent sensors in diverse applications. The sensing mechanism for detection of Fe3+ was further proposed based on the Stern-Volmer plots and fluorescence titration analysis.

RhB-Embedded Mn-MOF with Cyclotriphosphazene Skeleton as Dual-Emission Sensor for Putrescine as well as Smart Fluorescent Response of Aromatic Diamines and Nitrophenol

Luminescent metal-organic framework composites with multiple luminescence emissions have been efficient sensing platforms. Herein, a fluorescent sensor (RhB@1-0.4) with dual-emission fluorescence properties was prepared by introducing rhodamine B (RhB) into the framework of complex 1, [Mn2.5(HCPCP)(H2O)4]·(CH3CN)0.5 [HCPCP = hexa-(4-carboxyl-phenoxy)-cyclotriphosphazene and CH3CN = acetonitrile), which is a novel crystalline two-dimensional (2D) coordinated organic framework material. It is a highly desirable material, realizing a ratiometric fluorescence response to putrescine with a high signal-to-noise ratio, and the detection limit can be as low as 6.8 μM. In addition, RhB@1-0.4 exhibited a better fluorescent sensing performance for aromatic diamines and nitrophenols compared with that of complex 1. It is a potential functionalized MOF material for the application of multichannel fluorescence sensing.

Synthesis of amylose and cellulose derivatives bearing bulky pendants for high-efficient chiral fluorescent sensing

Three novel amylose and cellulose phenylcarbamate derivatives bearing bulky para-substituted benzothienyl or benzofuranyl pendants were successfully synthesized as chiral fluorescent sensors through carbamoylation followed by Suzuki-Miyaura coupling reactions. The bulky derivatives showed good enantioselective fluorescent sensing properties toward a total of eight chiral quenchers in this study. Especially, a high enantiomeric fluorescence difference ratio (ef = 164.35) was achieved on amylose benzofuranylphenylcarbamates (Amy-2) to the 3-amino-3-phenylpropan-1-ol (Q5), an important chiral drug intermediate. It indicated that a favorable chiral environment was effectively constructed by arrangement of bulky π-conjugated benzothienyl or benzofuranyl pendants on the phenylcarbamate moieties surrounding the helical backbone, which is crucial for high-efficient chiral fluorescent sensing. As chiral stationary phases for high-performance liquid chromatography, the bulky benzothienylphenylcarbamates of amylose and cellulose also showed good resolution powers to thirteen racemates, including metal tris(acetylacetonate) complexes, chiral drugs, analytes with axial chirality and chiral aromatic amines, which were difficult to be efficiently separated even on the popular Chiralpak AD and Chiralcel OD. The excitation-dependent chiral fluorescent sensing probably followed different mechanisms from that for chromatographic enantioseparation relying on the dynamic collision of molecules in the ground state. The structure of the bulky derivatives was also investigated by CD spectra and POM microscopy.

An efficient ethylcellulose fluorescent probe for rapid detection of Fe3+ and its multi-functional applications

Fe³⁺ is the most abundant essential transition metal ion in the human body, plays a vital role in biological and environmental systems. Ethyl cellulose is one of the derivatives of cellulose. Herein, a novel ethylcellulose fluorescent probe EC-HPCB for detecting Fe³⁺ was prepared by grafting a flavonol derivative as both fluorophore and selective recognition group. The probe exhibited a highly specific "turn-off" fluorescence response to Fe³⁺, and the fluorescence color changed from yellow to colorless in the presence of Fe³⁺. The detection limit of EC-HPCB for Fe³⁺ was 2.65 × 10^-7 mol/L, and the response time was as quick as 2 min. The detection mechanism was confirmed by ¹H NMR and DFT calculations. Based on the good solubility and processability in organic solvent, EC-HPCB was made into coating and film with favorable fluorescent performances. Furthermore, EC-HPCB probe was successfully applied to monitor Fe³⁺ in real water samples, and the EC-HPCB-loaded filter paper provided a solid-state platform for detecting Fe³⁺ by naked eye and fluorescence method.

Preparation of cellulose derivative bearing bulky 4-(2-benzothienyl)phenylcarbamate substituents as chiral stationary phase for enantioseparation

A novel cellulose derivative bearing bulky 4-(2-benzothienyl)phenylcarbamate substituents (Cel-1) was readily synthesized by carbamoylation followed by Suzuki-Miyaura coupling reaction. The corresponding coated-type chiral stationary phase (CSP) was prepared on basis of the derivative, and its chiral recognition ability was then evaluated by high-performance liquid chromatography (HPLC). The chiral recognition ability of the cellulose derivative was greatly influenced by introduction of the bulky benzothienyl pendants on the aromatic moieties of phenylcarbamates, compared with its analog with smaller groups. Many racemates, including the metal tris(acetylacetonate) complexes, chiral drug, and the analyte with axial chirality, were sufficiently separated with good enantioselectivities on Cel-1. Some of them were even higher than those on the commercially powerful Chiralcel OD, which is also a coated-type CSP derived from cellulose phenylcarbamate derivative containing smaller 3,5-dimethyl pendants. The ¹ H NMR and circular dichroism (CD) spectra of Cel-1 indicated that the obtained derivative possessed a regular higher order structure, and a strong cotton effect was observed within the absorption range of π-conjugated pendant at 350-500 nm. Impressively, the cellulose derivative bearing the bulky 4-(2-benzothienyl)phenylcarbamates exhibited good enantioselective fluorescence quenching behavior to the enantiomer pair of 1-phenylethylamine, probably suggesting its potential for the application as a chiral fluorescent sensor with high efficiency. The combination of the arrangement of bulky π-conjugated benzothienyl pendants on the phenylcarbamate moieties surrounding the helical backbone and the regular higher order structure of the polymer itself probably played a key role for this high chiral fluorescent recognition ability of Cel-1. The interaction sites of bulky 4-(2-benzothienyl)phenylcarbamate pendants in its excited state can exhibit higher enantioselective discrimination via fluorescent response to the chiral compound Q1, whereas the chiral recognition ability of Cel-1 to the same compound in the ground state had no clear improvement.

Recent studies on cellulose-based fluorescent smart materials and their applications: A comprehensive review

The progress of bio-based fluorescent smart materials and their multifunctional applications have attained increasing interest in the recent decades. Cellulose is among the cheapest and widespread raw material on earth which can be modified into diverse useful materials. This review summarizes the chemical modification of cellulose into smart fluorescent materials. This further highlights on the fabrication of the prepared fluorescent materials into films, fibers, paper strips, carbon dots, hydrogels and solutions which are applied for the sensing of toxic metals and anions, pH, bioimaging, common organic solvents, aliphatic and aromatic amines, nitroaromatics, fluorescent printing, coating, and anti-counterfeiting applications. Finally, the discussion about the upcoming investigations, challenges, and options open for the cellulose-based luminescence sensors are communicated. We believe that this review will appeal more and more attention and curiosity for the chemists, biochemists, and chemical engineers working with the synthesis of cellulose-based fluorescent materials for widespread applications.

Helical Assemblies of One-Dimensional Supramolecular Polymers Composed of Helical Macromolecules: Generation of Circularly Polarized Light Using an Infinitesimal Chiral Source

We report the synthesis of one-dimensional supramolecular polymers composed of one-handed helical macromolecules bearing fluorescent pendant groups and the generation of circularly polarized light on the basis of hierarchical chiral amplification starting from a tiny amount of chiral substituent. Copolymerization of benzo[1,2-b:4,5-b']dithiophene-appended achiral/chiral isocyanides (99:1, mol/mol) with a solid-state photoluminescence feature afforded submicrometer supramolecular fibers, in which almost perfect single-handed helical polyisocyanides were noncovalently connected end to end. The resulting helical supramolecular polymers were further helically assembled to form a cholesteric liquid crystal film with an intense circularly polarized luminescence (CPL) signal. Surprisingly, the supramolecular system containing only 0.01 mol % of the chiral monomer unit also emitted the observable circularly polarized light owing to multiple chiral amplification from an infinitesimal point chirality to helical chirality and then to supramolecular chirality. Furthermore, chiral information was efficiently transferred from the helically assembled supramolecular system containing 1 mol % of the chiral unit to achiral dye molecules blended in the film, allowing full-color tunable induced CPL with luminescence dissymmetry factors greater than 1.0 × 10^-2. This unprecedentedly strong chiral amplification enables the creation of helical supramolecular polymers and chirally assembled systems with various chiral functions based solely on an infinitesimal chiral source.

Microscopic chiral pockets in a tris(chelated) iridium(iii) complex as sites for dynamic enantioselective quenching

A microscopic pocket surrounded by bulky ligands in Ir(iii) acted as a site discriminating the chirality of an approaching molecule.