Recent progress on polymeric probes for formaldehyde sensing: a comprehensive review

Formaldehyde (FA) is a reactive toxic volatile organic compound (VOC), produced both exogenously from the environment and endogenously within most organisms, and poses significant health risks to humans at elevated concentrations. Consequently, the development of reliable and sensitive FA sensing technologies is crucial for environmental monitoring, industrial safety, and public health protection. This review will provide a concise overview of FA sensing methodologies, highlighting key principles, sensing mechanisms, and recent advancements. The main aim of this review article is to comprehensively discuss recent advancements in FA sensors utilizing small molecules, nanoparticles, organic materials, and polymers, along with their successful applications across various fields, with particular emphasis on in situ FA sensing using polymeric probes due to their advantages over small molecular probes. Additionally, it will discuss prospects for future design and research in this area. We anticipate that this article will aid in the development of next-generation polymeric FA sensing probed with improved physicochemical properties.

Synthesis and optimization of chitosan-incorporated semisynthetic polymer/α-Fe2O3 nanoparticle hybrid polymer to explore optimal efficacy of fluorescence resonance energy transfer/charge transfer for Co(II) and Ni(II) sensing

Initially, four synthetic fluorescent polymers (SFPs) are synthesized from α-methacrylic acid and methanolacrylamide monomers carrying -C(=O)OH and -C(=O)NH subfluorophores, respectively. Among SFPs, ∼1:1 incorporation of subfluorophores in the optimum SFP3 is explored by spectroscopic analyses. Subsequently, chitosan is incorporated in SFP3 to produce five semi-synthetic fluorescent polymers (SSFPs). The maximum incorporation of chitosan in SSFP4 is supported by different spectroscopies. In SSFP4, strong electrostatic interactions among polar functionalities of chitosan and synthetic polymer favor resonance-associated charge transfer (RCT) from SSFP4-(amide) to SSFP4-(canonical). Finally, three hybrid fluorescent polymers (HFPs) are fabricated encapsulating iron-oxide nanoparticle within SSFP4. The maximum proportion of hematite (α-Fe2O3) phase in HFPs is explored by spectroscopic, magnetometric, microscopic, and light scattering studies. HFP2 shows local/RCT/fluorescence resonance energy transfer (FRET) emission at 393/460/570 nm. In HFP2, FRET, RCT, and ratiometric pH-sensing within 3.0-6.5 phenomena are explored by solvent polarity effects, time-correlated single photon counting, quantum yield measurements, alongside I431/I460 vs pH plots. RCT and FRET emissions of HFP2 are utilized for selective sensing of Co(II)/Ni(II) with limits of detection of 4.990 ppb (460 nm)/4.353 ppb (570 nm) and 45.041 ppb (428 nm)/29.617 ppb (527 nm) in organic and aqueous solutions, respectively.

Tellurium Containing Long Lived Emissive Fluorophore for Selective and Visual Detection of Picric Acid through Photo-Induced Electron Transfer

A novel tellurium (Te) containing fluorophore, 1 and its nickel (2) and copper (3) containing metal organic complex (MOC) have been synthesized to exploit their structural and optical properties and to deploy these molecules as fluorescent probes for the selective and sensitive detection of picric acid (PA) over other commonly available nitro-explosives. Furthermore, density functional theory (DFT) and single crystal X-ray diffraction (SCXRD) techniques revealed the inclusion of "soft" Tellurium (Te) and "hard" Nitrogen (N), Oxygen (O) atoms in the molecular frameworks. Owing to the presence of electron rich "N" and "O" atoms along with "Te" in the molecular framework, 1 could efficiently and selectively sense PA with more than 80 % fluorescence quenching efficiency in organic medium and having detection limit of 4.60 μM. The selective detection of PA compared to other nitro-explosives follows a multi-mechanism based "turn-off" sensing which includes photo-induced electron transfer (PET), electrostatic (π-π stacking and π-anion/cation) interaction, intermolecular hydrogen bonding and inner filter effect (IFE). The test strip study also establishes the sensitivity of 1 for detection of PA.

Pyrazoline-Based Fluorescent Probe: Synthesis, Characterization, Theoretical Simulation, and Detection of Picric Acid

2-Pyrazoline containing benzothiazole ring 2-[1-(1,3-benzothiazol-2-yl)-5-(4-methoxyphenyl)-4,5-dihydro-1H-pyrazol-3-yl]phenol (BP) have been synthesized for the effective identification of picric acid over other competing nitro compounds using fluorescence technique. The pyrazoline BP showed quenching efficiency as high as 82% comparative to other nitro aromatics. The limit of detection and limit of quantification were found to be 1.1 μM and 3.3 μM. The possible mechanism with the quenched PA detection efficiency was based on fluorescence energy transfer and photoinduced electron transfer. Moreover, the observed results were supported by the optimized structures of the compounds using the DFT/B3LYP/6-311G/LanL2DZ method. Eventually, the pyrazoline derivative BP was further utilized for natural water samples, showing recoveries in the 87.62-101.09% and RSD was less than 3%.

Antibacterial activity of hydrophobicity modulated cationic polymers with enzyme and pH-responsiveness

The membrane lipid compositions of prokaryotic and eukaryotic cells are inherently different in many aspects, although some similarities exist in their structure and composition. Therefore, selective targeting of membrane lipids with a compound of therapeutic value, such as an antibacterial copolymer, is often challenging. Hence, developing an ideal copolymer with antibacterial properties demands hydrophobicity/hydrophilicity balance with a high biosafety profile. To integrate hydrophobic/hydrophilic balance and cationic charge in an alternating antibacterial copolymer with enzyme and pH-responsiveness, a lysine appended styrenic monomer was copolymerized with a fatty acid (octanoic acid (OA) or myristic acid (MA)) tethered maleimide monomer via reversible addition-fragmentation chain transfer (RAFT) polymerization. A range of microscopic analyses, including dynamic light scattering (DLS), confirmed the formation of nanoaggregates (size ∼30-40 nm) by these polymers in aqueous solution with positive zeta potential (cationic surface charge). Hydrophobic Nile red (NR) dye was successfully encapsulated in the nanoaggregates, and the in vitro release kinetics of the NR dye were monitored at different pHs and in the presence or absence of esterase/lipase. The in vitro release kinetics of NR revealed ∼85% dye release in the presence of pH 5.5 and lipase, suggesting their suitability for pH/enzyme-triggered therapeutic payload delivery. The standard broth microdilution assay showed significant bactericidal activity against both Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria with an MIC50 value <30 μg mL-1. The effect of polymeric nanoaggregates on bacterial morphology and in vitro survival was further confirmed by field emission scanning electron microscopy (FESEM), agar gel disk diffusion assay, and bacterial live/dead cell count. The significantly low hemolytic activity against red blood cells (RBCs) (HC50 >103 μg mL-1) and nontoxic effect on human intestinal epithelial cells (INT 407) (EC50 >500 μg mL-1) ensure that the polymer nanoaggregates are safe for in vivo use and can serve as a potent antibacterial polymer.

Thin colorimetric film array for rapid and selective detection of v-type nerve agent mimic in potentially contaminated areas

The expeditious detection and quantification of V-series nerve agents (VX) on potentially contaminated surfaces are crucial for the prevention of regional conflict incidents, acts of terrorism, or illicit activities. However, the low volatility and high toxicity of VX make these tasks challenging. Herein, we designed two novel colorimetric thin polymeric films to rapidly and sensitively detect demeton-S, a VX mimic, in contaminated areas. The polymeric films were specifically engineered to include a coordination site for Au (III) ions. Initially, these films were coordinated with Au (III), causing a discernible alteration in color due to enhancement in intramolecular charge transfer process. In the presence of demeton-S, the Au (III) ligands in the films are displaced with demeton-S, resulting in the restoration of the original color of the film, as the enhanced intramolecular charge transfer process is inhibited and thereby serving as an indicator of the presence of demeton-S. The polymeric films exhibit remarkable selectivity toward demeton-S compared to G-type nerve agents and other interference. The reusability of the polymeric films for demeton-S detection was achieved owing to the reversibility of the films during the alternative exposure of Au (III) and demeton-S. The polymeric films demonstrated their applicability for demeton-S detection and quantification in several contaminated areas, including different water, soil, and skin, rendering them highly suitable for on-site measurements.

Simultaneous detection and removal of mercury (II) using multifunctional fluorescent materials

Environmental problems caused by mercury ions are increasing due to growing industrialization, poor enforcement, and inefficient pollutant treatment. Therefore, detecting and removing mercury from the ecological chain is of utmost significance. Currently, a wide range of small molecules and nanomaterials have made remarkable progress in the detection, detoxification, adsorption, and removal of mercury. In this review, we summarized the recent advances in the design and construction of multifunctional materials, detailed their sensing and removing mechanisms, and discussed with emphasis the advantages and disadvantages of different types of sensors. Finally, we elucidated the problems and challenges of current multifunctional materials and further pointed out the direction for the future development of related materials. This review is expected to provide a guideline for researchers to establish a robust strategy for the detection and removal of mercury ionsin the environment.

Heteroatom-Doped Carbon Quantum Dots and Polymer Composite as Dual-Mode Nanoprobe for Fluorometric and Colorimetric Determination of Picric Acid

Oxygen- and nitrogen-heteroatom-doped, water-dispersible, and bright blue-fluorescent carbon dots (ON-CDs) were prepared for the selective and sensitive determination of 2,4,6-trinitrophenol (picric acid, PA). ON-CDs with 49.7% quantum yield were one-pot manufactured by the reflux method using citric acid, d-glucose, and ethylenediamine precursors. The surface morphology of ON-CDs was determined by scanning transmission electron microscopy, high-resolution transmission electron microscopy, dynamic light scattering, Raman, infrared, and X-ray photoelectron spectroscopy techniques, and their photophysical properties were estimated by fluorescence spectroscopy, UV-vis spectroscopy, fluorescence lifetime measurement, and 3D-fluorescence excitation-emission matrix analysis. ON-CDs at an average particle size of 3.0 nm had excitation/emission wavelengths of 355 and 455 nm, respectively. With the dominant inner-filter effect- and hydrogen-bonding interaction-based static fluorescence quenching phenomena supported by ground-state charge-transfer complexation (CTC), the fluorescence of ON-CDs was selectively quenched with PA in the presence of various types of explosives (i.e., 2,4,6-trinitrotoluene, tetryl, 1,3,5-trinitroperhydro-1,3,5-triazine, 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane, pentaerythritol tetranitrate, 3-nitro-1,2,4-triazole-5-one, and TATP-hydrolyzed H2O2). The analytical results showed that the emission intensity varied linearly with a correlation coefficient of 0.9987 over a PA concentration range from 1.0 × 10-9 to 11.0 × 10-9 M. As a result of ground-state interaction (H-bonding and CTC) of ON-CDs with PA, an orange-colored complex was formed different from the characteristic yellow color of PA in an aqueous medium, allowing naked-eye detection of PA. The detection limits for PA with ON-CDs were 12.5 × 10-12 M (12.5 pM) by emission measurement and 9.0 × 10-10 M (0.9 nM) by absorption measurement. In the presence of synthetic explosive mixtures, common soil cations/anions, and camouflage materials, PA was recovered in the range of 95.2 and 102.5%. The developed method was statistically validated against a reference liquid chromatography coupled to tandem mass spectrometry method applied to PA-contaminated soil. In addition, a poly(vinyl alcohol)-based polymer composite film {PF(ON-CDs)} was prepared by incorporating ON-CDs, enabling the smartphone-assisted fluorometric detection of PA.

Stimuli-Responsive Aggregation-Induced Emission (AIE)-Active Polymers for Biomedical Applications

At high concentration or in the aggregated state, most of the traditional luminophores suffer from the general aggregation-caused quenching (ACQ) effect, which significantly limits their biomedical applications. On the contrary, a few fluorophores exhibit an aggregation-induced emission (AIE) feature which is just the opposite of ACQ. The luminophores with aggregation-induced emission (AIEgens) have exhibited noteworthy advantages to get tunable emission, excellent photostability, and biocompatibility. Incorporating AIEgens into polymer design has yielded diversified polymer systems with fascinating photophysical characteristics. Again, stimuli-responsive polymers are capable of undergoing chemical and/or physical property changes on receiving signals from single or multiple stimuli. The combination of the AIE property and stimuli responses in a single polymer platform provides a feasible and effective strategy for the development of smart polymers with promising biomedical applications. Herein, the advancements in stimuli-responsive polymers with AIE characteristics for biomedical applications are summarized. AIE-active polymers are first categorized into conventional π-π conjugated and nonconventional fluorophore systems and then subdivided based on various stimuli, such as pH, redox, enzyme, reactive oxygen species (ROS), and temperature. In each section, the design strategies of the smart polymers and their biomedical applications, including bioimaging, cancer theranostics, gene delivery, and antimicrobial examples, are introduced. The current challenges and future perspectives of this field are also stated at the end of this review article.

Nontraditional Redox Active Aliphatic Luminescent Polymer for Ratiometric pH Sensing and Sensing-Removal-Reduction of Cu(II): Strategic Optimization of Composition

Here, redox active aliphatic luminescent polymers (ALPs) are synthesized via polymerization of N,N-dimethyl-2-propenamide (DMPA) and 2-methyl-2-propenoic acid (MPA). The structures and properties of the optimum ALP3, ALP3-aggregate and Cu(I)-ALP3, ratiometric pH sensing, redox activity, aggregation enhanced emission (AEE), Stokes shift, and oxygen-donor selective coordination-reduction of Cu(II) to Cu(I) are explored via spectroscopic, microscopic, density functional theory-reduced density gradient (DFT-RDG), fluorescence quenching, adsorption isotherm-thermodynamics, and electrochemical methods. The intense blue and green fluorescence of ALP3 emerges at pH = 7.0 and 9.0, respectively, due to alteration of fluorophores from -C(═O)N(CH₃ )₂ / -C(═O)OH to -C(O^- )═N⁺ (CH₃ )₂ / -C(═O)O^- , inferred from binding energies at 401.32 eV (-C(O^- )═N⁺ (CH₃ )₂ ) and 533.08 eV (-C(═O)O^- ), significant red shifting in absorption and emission spectra, and peak at 2154 cm^-1 . The n-π* communications in ALP3-aggregate, hydrogen bondings within 2.34-2.93 Å (intramolecular) in ALP3 and within 1.66-2.89 Å (intermolecular) in ALP3-aggregate, respectively, contribute significantly in fluorescence, confirmed from NMR titration, ratiometric pH sensing, AEE, excitation dependent emission, and Stokes shift and DFT-RDG analyses. For ALP3, Stokes shift, excellent limit of detection, adsorption capacity, and redox potentials are 13561 cm^-1 /1.68 eV, 0.137 ppb, 122.93 mg g^-1 , and 0.33/-1.04 V at pH 7.0, respectively.

From small molecules to polymeric probes: recent advancements of formaldehyde sensors

Formaldehyde is a well-known industrial material regularly used in fishery, vegetable markets, and fruit shops for maintaining their freshness. But due to its carcinogenic nature and other toxic effects, it is very important to detect it in very low concentrations. In recent years, amine-containing fluorescent probes have gained significant attention for designing formaldehyde sensors. However, the major drawbacks of these small molecular probes are low sensitivity and long exposure time, which limits their real-life applications. In this regard, polymeric probes have gained significant attention to overcome the aforementioned problems. Several polymeric probes have been utilized as a coating material, nanoparticle, quartz crystal microbalance (QCM), etc., for the selective and sensitive detection of formaldehyde. The main objective of this review article is to comprehensively describe the recent advancements in formaldehyde sensors based on small molecules and polymers, and their successful applications in various fields, especially in situ formaldehyde sensing in biological systems.

Ultrasensitive Picomolar Detection of Aqueous Acids in Microscale Fluorescent Droplets

We report on a fluorescent-droplet-based acid-sensing scheme that allows limits of detection below 100 pM for weak acids. The concept is based on a strong partitioning of acid from an aqueous phase into octanol droplets. Using salicylic acid as a demonstration, we show that at a high concentration, the acid partitions into the organic phase by a factor of 260, which is approximately consistent with literature values. However, at lower concentrations, we obtain a partition coefficient as high as 10⁶, which is partly responsible for the excellent sensing performance. The enhanced equilibrium partitioning is likely due to the interaction of the dissociated acid phase with the sensor dye employed for this work. The effect of droplet size was determined, after which we derived a simple model to predict the time dependence of the color change as a function of droplet size. This work shows that color-change fluorescent-droplet-based detection is a promising avenue that can lead to exceptional sensing performance from an aqueous analyte.

A facile and economical method to synthesize a novel wide gamut fluorescent copolyester with outstanding properties

A series of high molecular weight copolyesters PExBTyAm were synthesized by a simple and economical two-step polycondensation method, and for the first time we found that the copolyesters exhibited an green fluorescence under 365 nm UV light.

Styrene-Maleimide/Maleic Anhydride Alternating Copolymers: Recent Advances and Future Perspectives

Alternating sequencing of styrene-maleimide/maleic anhydride (S-MI/MA) in the copolymer chain is known for a long time. But since early 2000, this class of copolymers has been extensively studied using various living/controlled polymerization techniques to design S-MI/MA alternating copolymers with tunable molecular weight, narrow dispersity (Ð), and precise chain-end functionality. The widespread diverse applications of this polymeric backbone are due to its ease of synthesis, cheap starting materials, high precision in alternating sequencing, and facile post-polymerization functionalization with simple organic reactions. Recently, S-MI/MA alternating copolymers have been rediscovered as novel polymers with unprecedented emissive behavior. It outperforms the traditional fluorophores with no aggregation caused quenching (ACQ), aqueous solubility, and greater cell viability. Herein, the origin of alternating sequence, synthesis, and recent (2010-Present) developments in applications of these polymers in different fields are elaborately discussed, including the advantages of the unconventional luminogenic property. This review article also highlights the future research directions of the versatile S-MI/MA copolymers.

Nonconjugated Biocompatible Macromolecular Luminogens for Sensing and Removals of Fe(III) and Cu(II): DFT Studies on Selective Coordination(s) and On-Off Sensing

This work reports the design and synthesis of two nonaromatic biocompatible macromolecular luminogens, i.e., 2-(dimethylamino)ethyl methacrylate-co-2-(dimethylamino)ethyl 3-(N-(methylol)acrylamido)-2-methylpropanoate-co-N-(methylol)acrylamide/DMAEMA-co-DMAENMAMP-co-NMA (P1) and methacrylic acid-co-3-(N-(methylol)acrylamido)-2-methylpropanoic acid-co-N-(methylol)acrylamide/MEA-co-NMAMPA-co-NMA (P2), prepared through in situ anchored acrylamido-ester/DMAENMAMP and acrylamido-acid/NMAMPA third comonomers, respectively, in a facile polymerization of two non-luminous monomers in water medium to circumvent the drawbacks related to aggregation-caused quenching of aromatic luminogens. The structures of P1/P2, in situ anchored comonomers, fluorophores, N-branching associated n-π* interactions, and hydrogen bonding assisted aggregation-enhanced emissions are comprehended by nuclear magnetic resonance, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible, thermogravimetric analysis (TGA), dynamic light scattering (DLS), transmission electron microscopy (TEM), fluorescence lifetime, and fluorescence imaging. P1 and P2 are appropriate for sensitive detections/exclusions of Fe(III)/Cu(II) and cell-imaging. The intrinsic fluorescence, on-off sensing, selective coordinations of Fe(III) and Cu(II) with fluorophores, emission quenching mechanisms, and removals of Fe(III) and Cu(II) are investigated by DFT/NTO analyses of P1/P2 and Fe(III)-P1 and Cu(II)-P2 complexes, XPS, and isotherms and kinetics parameters. The excellent biocompatibilities, comparable limit of detections, i.e., 1.70 × 10^-7 and 1.59 × 10^-7 [m], and higher adsorption capacities, i.e., 77.25 and 154.13 mg g^-1 , at low ppm; 303 K; and pH = 7 compel P1/P2 to be acceptable for multipurpose applications.

A Reusable Polymeric Film for the Alternating Colorimetric Detection of a Nerve Agent Mimic and Ammonia Vapor with Sub-Parts-per-Million Sensitivity

Thin polymeric films were developed for the vapor-phase sequential colorimetric detection of a nerve agent mimic and ammonia with high sensitivity. N-(4-Benzoylphenyl)acrylamide (BPAm), N,N-dimethylacrylamide (DMA), and (E)-2-(methyl(4-(pyridine-4yldiazenyl)phenyl)amino)ethyl acrylate (MPDEA, M1) were copolymerized via free radical polymerization (FRP) to yield p(BPAm-co-DMA-co-MPDEA), hereafter referred to as P1. P1 exhibits selective sensing properties toward diethyl chlorophosphate (DCP), a nerve agent mimic, in pure aqueous media. Upon the addition of DCP, the pyridine groups of P1 were quaternized with DCP, accompanied by a color change from yellow to pink due to the enhancement of the intramolecular charge transfer (ICT) effect. In situ generated quaternized P1, hereafter referred to as P2, after DCP sensing was used to selectively detect ammonia via dequaternization in an aqueous medium. Ammonia detection was indicated by a color change in the solution from pink back to yellow. A surface-immobilized P1 film was prepared and employed for the vapor-phase detection of DCP, demonstrating that an amount of as low as 2 ppm was detectable. Ammonia vapor was also successfully detected by the P2 film via the ammonia-triggered removal of the quaternized phosphates. Alternating exposure of the film to DCP and ammonia resulted in the corresponding color changes, thereby demonstrating the reversibility of the system. The reusability of the polymeric film for detecting DCP and ammonia in the vapor phase was confirmed by performing four sequential colorimetric detection cycles.

Light-Emitting Multifunctional Maleic Acid-co-2-(N-(hydroxymethyl)acrylamido)succinic Acid-co-N-(hydroxymethyl)acrylamide for Fe(III) Sensing, Removal, and Cell Imaging

The intrinsically fluorescent highly hydrophilic multifunctional aliphatic terpolymer, maleic acid (MA)-co-2-(N-(hydroxymethyl)acrylamido)succinic acid (NHASA)-co-N-(hydroxymethyl)acrylamide (NHMA), that is, 1, was designed and synthesized via C-C/N-C-coupled in situ allocation of a fluorophore monomer, that is, NHASA, composed of amido and carboxylic acid functionalities in the polymerization of two nonemissive MA and NHMA. The scalable and reusable intrinsically fluorescent biocompatible 1 was suitable for sensing and high-performance adsorptive exclusion of Fe(III), along with the imaging of Madin-Darby canine kidney cells. The structure of 1, in situ fluorophore monomer, aggregation-induced enhanced emission, cell-imaging ability, and superadsorption mechanism were studied via microstructural analyses using 1H/13C NMR, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, atomic absorption spectroscopy, ultraviolet-visible spectroscopy, thermogravimetric analysis, dynamic light scattering, high-resolution transmission electron microscopy, solid-state fluorescence, fluorescence lifetime, and fluorescence imaging, along with measuring kinetics, isotherms, and thermodynamic parameters. The location, electronic structures, and geometries of the fluorophore and absorption and emission properties of 1 were investigated using density functional theory and natural transition orbital analyses. The limit of detection and the maximum adsorption capacity were 2.45 × 10-7 M and 542.81 mg g-1, respectively.

Multifunctional tryptophan-based fluorescent polymeric probes for sensing, bioimaging and removal of Cu2+ and Hg2+ ions

Fluorescent polymeric probes were synthesized by amalgamating tryptophan and pyridine side-chain moieties through an imine bond with the aim of selectively sense and remove both Cu²⁺ and Hg²⁺ ions from aqueous media.

A stilbazolium dye-based chromogenic and red-fluorescent probe for recognition of 2,4,6-trinitrophenol in water

Probe DMAS-DP in water shows highly selective decrease in absorbance (475 nm) and fluorescence intensity (615 nm) with 2,4,6-trinitrophenol and colour change from red to yellow (visible light) and red fluorescent to black (365 nm light).

Recent advances in the development and applications of nonconventional luminescent polymers

Recently, nonconventional luminescent polymers (NLPs) have emerged as the most sought-after alternative luminescent materials. This review provides a thorough description of the importance and applications of each class of state-of-the-art NLPs.

Syntheses, characterization, multi-acid fluorescence sensing and electroluminescence properties of Cr(ii)-based metallopolymers

Cr(ii)-Based multifunctional fluorescent metallopolymers with different degrees of backbone rigidity were synthesized and applied as multi-acid sensors and electroluminescent ON–OFF switches.

AB-alternating copolymers via chain-growth polymerization: synthesis, characterization, self-assembly, and functions

In this review, four topics on alternating copolymers synthesized via chain-growth polymerization are reviewed: (1) how to control the alternating sequence; (2) sequence analysis; (3) self-assembly; and (4) functions.

BODIPY-Derived Polymeric Chemosensor Appended with Thiosemicarbazone Units for the Simultaneous Detection and Separation of Hg(II) Ions in Pure Aqueous Media

Developing a simple and cheap analytical method for the selective detection and quantitative separation of toxic ions present in aqueous media is the biggest challenge faced by the chemosensing research community. Here, a 5,5-difluoro-1,3,7,9-tetramethyl-10-phenyl-5 H-dipyrrolo-diazaborinine-derived water-soluble polymer integrated with thiosemicarbazone units was rationally designed and synthesized for the simultaneous detection and separation of Hg(II) ions in pure aqueous solution. The water-soluble polymer scaffold poly( N, N'-dimethyl acrylamide- co-5,5-difluoro-1,3,7,9-tetramethyl-10-phenyl-5 H-dipyrrolo-diazaborinine-2-carbaldehyde) was synthesized by reversible addition-fragmentation chain transfer polymerization, followed by post-polymerization modification with thiosemicarbazide, leading to the formation of the target probe, P1. The nonemitting P1 exhibited bright yellow emission upon exposure to Hg(II) ions, with a limit of detection as low as 0.37 μM. This turn-on emission behavior triggered by Hg(II) ions might originate from the suppression of isomerization around the C═N bond of the thiosemicarbazone moiety caused by the formation of a coordination complex between P1 and Hg(II) ions. In addition, P1 displayed excellent selectivity toward Hg(II) ions over other metal cations. Finally, the selective removal of Hg(II) ions from an aqueous solution containing various metal ions was achieved by precipitation, which is probably caused by the fact that coordination complexes whereby Hg(II) ions acted as bridgeheads between P1 molecules had formed.

Rational molecular design: functional quinoline derivatives for PA detection, gaseous acid/base switching and anion-controlled fluorescence

D-π-A quinoline derivatives were applied in PA detection, gaseous acid/base switching and anions-controlled fluorescence.

Amino acid-derived alternating polyampholyte luminogens

A unique polyampholyte luminogen comprised of alternatively placed oppositely charged moieties onto the poly(styrene-alt-maleimide) skeleton was synthesized, and used for the specific detection of carbon disulfide (CS₂) in both solution and vapor phases.

A silicone polymer modified by fluoranthene groups as a new approach for detecting nitroaromatic compounds

In this work, fluoranthene-modified polysiloxane (FMPS) was synthesized via the Diels–Alder reaction.

Modulation of side chain crystallinity in alternating copolymers

A remarkable enhancement in crystalline melting temperature (T_m) was observed in a series of fatty acids and mPEG containing alternating copolymers with the lone increase in mPEG chain lengths.

“Receptor free” inner filter effect based universal sensors for nitroexplosive picric acid using two polyfluorene derivatives in the solution and solid states

“Receptor free” and “interaction free” detection of nitroexplosive PA at remarkably low limit of detection (LOD) values of 110 nM and 219 nM using two new fluorescent polymers via the inner filter effect mechanism.

Aromatic Nitrogen Mustard-Based Autofluorescent Amphiphilic Brush Copolymer as pH-Responsive Drug Delivery Vehicle

Delivery of clinically approved nonfluorescent drugs is facing challenges because it is difficult to monitor the intracellular drug delivery without incorporating any integrated fluorescence moiety into the drug carrier. The present investigation reports the synthesis of a pH-responsive autofluorescent polymeric nanoscaffold for the administration of nonfluorescent aromatic nitrogen mustard chlorambucil (CBL) drug into the cancer cells. Copolymerization of poly(ethylene glycol) (PEG) appended styrene and CBL conjugated N-substituted maleimide monomers enables the formation of well-defined luminescent alternating copolymer. These amphiphilic brush copolymers self-organized in aqueous medium into 25-68 nm nanoparticles, where the CBL drug is enclosed into the core of the self-assembled nanoparticles. In vitro studies revealed ∼70% drug was retained under physiological conditions at pH 7.4 and 37 °C. At endolysosomal pH 5.0, 90% of the CBL was released by the pH-induced cleavage of the aliphatic ester linkages connecting CBL to the maleimide unit. Although the nascent nanoparticle (without drug conjugation) is nontoxic, the drug conjugated nanoparticle showed higher toxicity and superior cell killing capability in cervical cancer (HeLa) cells rather than in normal cells. Interestingly, the copolymer without any conventional chromophore exhibited photoluminescence under UV light irradiation due to the presence of "through-space" π-π interaction between the C═O group of maleimide unit and the adjacent benzene ring of the styrenic monomer. This property helped us intracellular tracking of CBL conjugated autofluorescent nanocarriers through fluorescence microscope imaging. Finally, the 4-(4-nitrobenzyl)pyridine (NBP) colorimetric assay was executed to examine the ability of CBL-based polymeric nanomaterials toward alkylation of DNA.

Recyclable Polymeric Thin Films for the Selective Detection and Separation of Picric Acid

Thin-film probes have been developed for the reversible detection and separation of picric acid (PA) with extreme sensitivity in aqueous media. The free radical copolymerization of dimethylacrylamide (DMA), benzophenone acrylamide (BPAM), and glycidyl methacrylate (GMA) with a feed ratio of 95:1:4 yielded [p(DMA- co-BPAM- co-GMA)] (P1). P1 was transformed to the final polymeric probe, P2, by a subsequent ring-opening reaction between N-(pyren-1-yl-methyl)propan-1-amine (Py-PA) with the epoxide unit of P1. P2 exhibited rapid and selective sensing properties toward PA in aqueous media via turn-off fluorescence emission. The detection sensitivity was tuned precisely by varying the pH of the solution. After the immobilization of P2 on a quartz slide by spin-coating, followed by exposure to UV light, the resulting film exhibited an attogram-level detection limit toward PA. The photoinduced electron transfer together with an energy-transfer process between PA and the pyrene units of P2 were maximized by the strong π-π stacking of pyrene units of P2, which, in turn, induced rapid exciton energy diffusion. Furthermore, the separation of PA from the mixture of the various nitroaromatic compounds by the P2 film was achieved. Whereas the detection process of PA was reversible and repeatable over multiple cycles, the P2 film could be recycled.

Amino acid-derived stimuli-responsive polymers and their applications

The recent advances achieved in the study of various stimuli-responsive polymers derived from natural amino acids have been reviewed.

BODIPY-derived multi-channel polymeric chemosensor with pH-tunable sensitivity: selective colorimetric and fluorimetric detection of Hg2+ and HSO4− in aqueous media

A water-soluble BODIPY-containing polymeric chemosensor was synthesized for the selective colorimetric and turn-on fluorimetric detection of Hg²⁺ and HSO₄⁻ ions, respectively, in 100% aqueous media at physiological pH.