Pyrrolopyrrole-Based Aza-BODIPY Small Molecules for Organic Field-Effect Transistors

Diketopyrrolopyrrole (DPP), due to its good planarity, π-conjugate structure, thermal stability, and structural modifiability, has received much attention from the scientific community as an excellent semiconductor material for its applications in the field of optoelectronics, such as organic solar cells, organic photovoltaics, and organic field effect transistors. In this study, a new small molecule, pyrrolopyrrole aza-BODIPY (PPAB), based on the thiophene-substituted DPP structure was developed using the Schiff-base formation reaction of DPP and heteroaromatic amines. Absorption spectroscopy, electrochemistry, X-ray diffraction, molecular theoretical simulation calculation were performed, and organic field-effect transistor properties based on PPAB were investigated. It was found that PPAB exhibits a broad absorption range in the visible and near-infrared regions, which is attributed to its long-range conjugate structure. In addition, it is worth noting that PPAB has multiple F atoms resulting in the low LUMO level, which is conducive to the injection and transportation of charge carriers between the semiconductor layer and the electrode. Meanwhile, its hole carrier mobility is up to 1.3 × 10−3 cm2 V−1 s−1 due to its large conjugate structure, good intramolecular charge transfer effect, and high degree of coplanarity. In this study, a new chromophore with electron-deficient ability for designing high-performance semiconductors was successfully synthesized.

Correlating Optical Reflectance with the Topology of Aluminum Nanocluster Layers Growing on Partially Conjugated Diblock Copolymer Templates

Large-scale fabrication of metal cluster layers for usage in sensor applications and photovoltaics is a huge challenge. Physical vapor deposition offers large-scale fabrication of metal cluster layers on templates and polymer surfaces. In the case of aluminum (Al), only little is known about the formation and interaction of Al clusters during sputter deposition. Complex polymer surface morphologies can tailor the deposited Al cluster layer. Here, a poly(methyl methacrylate)-block-poly(3-hexylthiophen-2,5-diyl) (PMMA-b-P3HT) diblock copolymer template is used to investigate the nanostructure formation of Al cluster layers on the different polymer domains and to compare it with the respective homopolymers PMMA and P3HT. The optical properties relevant for sensor applications are monitored with ultraviolet-visible (UV-vis) measurements during the sputter deposition. The formation of Al clusters is followed in situ with grazing-incidence small-angle X-ray scattering (GISAXS), and the chemical interaction is revealed by X-ray photoelectron spectroscopy (XPS). Furthermore, atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM) yield topographical information about selective wetting of Al on the P3HT domains and embedding in the PMMA domains in the early stages, followed by four distinct growth stages describing the Al nanostructure formation.

Characterization of MOCVD-Prepared CIS Solar Cells

Chalcopyrite Cu(In,Ga)Se2 (CIGS) solar cells prepared via metal-organic chemical vapor deposition (MOCVD) are one of the candidates for highly advanced photovoltaic devices. This is because of their effectiveness and potential for reducing production costs through large-scale production. However, research on MOCVD-prepared solar cells is progressing slower than that on other types of solar cells, primarily because the preparation of CuInSe2 (CIS)-based films via MOCVD is relatively more sophisticated. In this study, we analyzed CIS solar cells prepared via three-stage MOCVD and processed with relatively simple precursors and techniques. We achieved an energy-conversion efficiency of 7.39% without applying a buffer layer. Instead, we applied a Cu-deficient layer to create a buried pn junction. Ultimately, we demonstrated that the fabrication of fully-MOCVD-processed CIS photovoltaic devices is feasible.

Vertical Cylinder-to-Lamella Transition in Thin Block Copolymer Films Induced by In-Plane Electric Field

Morphological transition between hexagonal and lamellar patterns in thin polystyrene-block-poly(4-vinyl pyridine) films simultaneously exposed to a strong in-plane electric field and saturated solvent vapor is studied with atomic force and scanning electron microscopy. In these conditions, standing cylinders made of 4-vinyl pyridine blocks arrange into threads up to tens of microns long along the field direction and then partially merge into standing lamellas. In the course of rearrangement, the copolymer remains strongly segregated, with the minor component domains keeping connectivity between the film surfaces. The ordering tendency becomes more pronounced if the cylinders are doped with Au nanorods, which can increase their dielectric permittivity. Non-selective chloroform vapor works particularly well, though it causes partial etching of the indium tin oxide cathode. On the contrary, 1,4-dioxane vapor selective to polystyrene matrix does not allow for any morphological changes.

Chemical Composition and Strain at Interfaces between Different Morphologies in Block Copolymer Thin Films

Transitional composition between two thin-film morphologies of the block copolymer, polystyrene-block-poly(tert-butyl acrylate) (PS-b-PtBuA), was investigated using near-field infrared spectroscopy and atomic force microscopy mechanical measurements. These techniques allowed block identification with nanoscale spatial resolution and elucidated the material's sub-surface composition. PS was found to form coronae around the PtBuA block in spherical valleys on flat areas of the film, and coronae of PtBuA surrounding the PS lamellae were observed at the edge of the polymer film, where parallel lamellae are formed. Furthermore, we found that the peak position and width varied by location, which may be a result of block composition, chain tension, or substrate interaction.

Programmable Assembly of π-Conjugated Polymers

π-Conjugated polymers have numerous applications due to their advantageous optoelectronic and mechanical properties. These properties depend intrinsically on polymer ordering, including crystallinity, orientation, morphology, domain size, and π-π interactions. Programming, or deliberately controlling the composition and ordering of π-conjugated polymers by well-defined inputs, is a key facet in the development of organic electronics. Here, π-conjugated programming is described at each stage of material development, stressing the links between each programming mode. Covalent programming is performed during polymer synthesis such that complex architectures can be constructed, which direct polymer assembly by governing polymer orientation, π-π interactions, and morphological length-scales. Solution programming is performed in a solvated state as polymers dissolve, aggregate, crystallize, or react in solution. Solid-state programming occurs in the solid state and is governed by polymer crystallization, domain segregation, or gelation. Recent progress in programming across these stages is examined, highlighting order-dependent features and assembly techniques that are unique to π-conjugated polymers. This should serve as a guide for delineating the many ways of directing π-conjugated polymer assembly to control ordering, structure, and function, enabling the further development of organic electronics.

Universal Suzuki-Miyaura Catalyst-Transfer Polymerization for Precision Synthesis of Strong Donor/Acceptor-Based Conjugated Polymers and Their Sequence Engineering

Catalyst-transfer polymerization has revolutionized the field of polymer synthesis due to its living character, but for a given catalyst system, the polymer scope is rather narrow. Herein we report a highly efficient Suzuki-Miyaura catalyst-transfer polymerization (SCTP) that covers a wide range of monomers from electron-rich (donor, D) to electron-deficient (acceptor, A) (hetero)arenes by rationally designing boronate monomers and using commercially available Buchwald RuPhos and SPhos Pd G3 precatalysts. Initially, we optimized the controlled polymerization of 3,4-propylenedioxythiophene (ProDOT), benzotriazole (BTz), quinoxaline (QX), and 2,3-diphenylquinoxaline (QXPh) by introducing new boronates, such as 4,4,8,8-tetramethyl-1,3,6,2-dioxazaborocane and its N-benzylated derivative, to modulate the reactivity and stability of the monomers. As a result, PProDOT, PBTz, PQX, and PQXPh were prepared with controlled molecular weight and narrow dispersity (Đ < 1.29) in excellent yield (>85%). A detailed investigation of the polymer structures using ¹H NMR and MALDI-TOF spectrometry supported the chain-growth mechanism and the high initiation efficiency of the SCTP method. In addition, the use of RuPhos-Pd showing excellent catalyst-transfer ability on both D/A monomers led to unprecedented controlled D-A statistical copolymerization, thereby modulating the HOMO energy level (from -5.11 to -4.80 eV) and band gap energy (from 1.68 to 1.91 eV) of the resulting copolymers. Moreover, to demonstrate the living nature of SCTP, various combinations of D-A and A-A block copolymers (PBTz-b-PProDOT, PQX-b-PProDOT, and PQX-b-PBTz) were successfully prepared by the sequential addition method. Finally, simple but powerful one-shot D-A block copolymerization was achieved by maximizing the rate difference between a fast-propagating pinacol boronate donor and a slow-propagating acceptor to afford well-defined poly(3-hexylthiophene)-b-poly(benzotriazole).

Living supramolecular polymerization of fluorinated cyclohexanes

The development of powerful methods for living covalent polymerization has been a key driver of progress in organic materials science. While there have been remarkable reports on living supramolecular polymerization recently, the scope of monomers is still narrow and a simple solution to the problem is elusive. Here we report a minimalistic molecular platform for living supramolecular polymerization that is based on the unique structure of all-cis 1,2,3,4,5,6-hexafluorocyclohexane, the most polar aliphatic compound reported to date. We use this large dipole moment (6.2 Debye) not only to thermodynamically drive the self-assembly of supramolecular polymers, but also to generate kinetically trapped monomeric states. Upon addition of well-defined seeds, we observed that the dormant monomers engage in a kinetically controlled supramolecular polymerization. The obtained nanofibers have an unusual double helical structure and their length can be controlled by the ratio between seeds and monomers. The successful preparation of supramolecular block copolymers demonstrates the versatility of the approach.

Double-Cable Conjugated Polymers with Pendant Rylene Diimides for Single-Component Organic Solar Cells

ConspectusConjugated polymers for application in organic solar cells (OSCs) have been developed from poly(phenylenevinylene) to poly(3-hexylthiophene) and then to "donor-acceptor" structures, providing power conversion efficiencies (PCEs) over 18% when blending with the electron acceptor as a two-component photoactive layer. Besides, graft-structural double-cable conjugated polymers that use an electron donor as conjugated backbones and an electron acceptor as pendant side units are one kind of conjugated polymer, in which charge carriers are generated in a single polymer. Therefore, double-cable conjugated polymers can be used as a single photoactive layer in single-component OSCs (SCOSCs). The covalently linked electron donor and acceptor enable double-cable polymers to maintain stable microstructures during long-term operation compared to two-component systems, which is very important for OSCs toward large-area applications. However, SCOSCs based on double-cable conjugated polymers provided PCEs below 3% in a long period, which is lagging far behind PCEs of two-component OSCs. The key reason for this is the limited number of chemical structures and the difficulty to tune the morphology in these polymers.In this Account, we provide an overview about our efforts on developing new double-cable conjugated polymers with rylene diimides as side units, and how to realize high PCEs in SCOSC devices. The studies start from developing a "functionalization-polymerization" method to synthesize the polymers containing rylene diimide acceptors, so that large amounts of double-cable conjugated polymers with distinct physical and electrochemical properties were obtained. Then, we will discuss how to control the nanophase separation in the crystalline region and optimize the miscibility in the amorphous region of double-cable polymers, simultaneously facilitating exciton dissociation and charge transport. With these efforts, a high PCE of 8.4% has been obtained, representing the record PCE in SCOSCs. In addition, the physical process and the stability of SCOSCs will be discussed. We hope that this account will inspire many innovative studies in this field and push the PCEs of SCOSCs to a new stage.

A sequential ROMP strategy to donor–acceptor di-, tri- and tetra arylenevinylene block copolymers

Sequential ROMP of electron rich and electron deficient paracyclophanediene monomers gives donor–acceptor di-, tri- and even tetrablock phenylenevinylene coploymers.

Miscibility-Controlled Phase Separation in Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Efficiencies over 8

A record power conversion efficiency of 8.40 % was obtained in single-component organic solar cells (SCOSCs) based on double-cable conjugated polymers. This is realized based on exciton separation playing the same role as charge transport in SCOSCs. Two double-cable conjugated polymers were designed with almost identical conjugated backbones and electron-withdrawing side units, but extra Cl atoms had different positions on the conjugated backbones. When Cl atoms were positioned at the main chains, the polymer formed the twist backbones, enabling better miscibility with the naphthalene diimide side units. This improves the interface contact between conjugated backbones and side units, resulting in efficient conversion of excitons into free charges. These findings reveal the importance of charge generation process in SCOSCs and suggest a strategy to improve this process: controlling miscibility between conjugated backbones and aromatic side units in double-cable conjugated polymers.

Macroscopic Alignment of Block Copolymers on Silicon Substrates by Laser Annealing

Laser annealing is a competitive alternative to conventional oven annealing of block copolymer (BCP) thin films enabling rapid acceleration and precise spatial control of the self-assembly process. Localized heating by a moving laser beam (zone annealing), taking advantage of steep temperature gradients, can additionally yield aligned morphologies. In its original implementation it was limited to specialized germanium-coated glass substrates, which absorb visible light and exhibit low-enough thermal conductivity to facilitate heating at relatively low irradiation power density. Here, we demonstrate a recent advance in laser zone annealing, which utilizes a powerful fiber-coupled near-IR laser source allowing rapid BCP annealing over a large area on conventional silicon wafers. The annealing coupled with photothermal shearing yields macroscopically aligned BCP films, which are used as templates for patterning metallic nanowires. We also report a facile method of transferring laser-annealed BCP films onto arbitrary surfaces. The transfer process allows patterning substrates with a highly corrugated surface and single-step rapid fabrication of multilayered nanomaterials with complex morphologies.

Significantly Improved Morphology and Efficiency of Nonhalogenated Solvent-Processed Solar Cells Derived from a Conjugated Donor-Acceptor Block Copolymer

A highly crystalline conjugated donor (D)-acceptor (A) block copolymer (PBDT2T-b-N2200) that has good solubility in nonhalogenated solvents is successfully synthesized. PBDT2T-b-N2200 shows a broad complementary absorption behavior owing to a wide-band gap donor (PBDT2T) present as a D-block and a narrow-band gap acceptor (N2200) present as an A-block. Polymer solar cells (PSCs) with conjugated block copolymer (CBCP) are fabricated using a toluene solution and PSC created with an annealed film showing the highest power conversion efficiency of 6.43%, which is 2.4 times higher than that made with an annealed blend film of PBDT2T and N2200. Compared to the blend film, the PBDT2T-b-N2200 film exhibits a highly improved surface and internal morphology, as well as a faster photoluminescence decay lifetime, indicating a more efficient photoinduced electron transfer. In addition, the PBDT2T-b-N2200 film shows high crystallinity through an effective self-assembly of each block during thermal annealing and a predominant face-on chain orientation favorable to a vertical-type PSC. Moreover, the CBCP-based PSCs exhibit an excellent shelf-life time of over 1020 h owing to their morphological stability. From these results, a D-A block copolymer system is one of the efficient strategies to improve miscibility and morphological stability in all polymer blend systems.

Improved efficiency of single-component active layer photovoltaics by optimizing conjugated diblock copolymers

Using an A–B type monomer instead of an AA + BB type monomer to synthesise diblock copolymers, the PCE of a single-component photovoltaic device reached 1.22%.

A New Method for the Synthesis of Bromine-Containing Heterocyclic Compounds for Photovoltaic Polymers

With the development and improvement of systems for converting sunlight into electric and thermal energy, more and more work is emerging on the development of the newest and most promising direction in solar energy, namely the creation of solar cells based on photosensitive polymers. Recently the power conversion efficiency of organic photovoltaic (OPV) devices has overcome the barrier of 17%, and thus we can expect a new wave of scientific interest in the development of new, more efficient OPV devices. Unfortunately, during searching for highly efficient chemical structures of OPV polymers, the researchers missed an important point: all photovoltaic polymers consist of aromatic and heteroaromatic «building blocks», which, in turn, are synthesized based on outdated techniques using highly toxic, dangerous for life and environment precursors. The development of «green», environmentally friendly, economically viable methods for the synthesis of photovoltaic polymers and building blocks for their production, will make the energy obtained from OPV truly «green». In this work, we present an alternative, «green» method for synthesizing halogen-containing aromatic and heteroaromatic, expensive building blocks most commonly used in the synthesis of photovoltaic polymers, which can be used to obtain photovoltaic polymers of various structures. We present the original methods for the synthesis of 4,4-dibromo-1,1- biphenyl (1), 4,7-dibromo-2,1,3-benzothiadiazole (2), 2-bromothiophene (3) and 2,5-dibromothiophene (4). All these methods differ from the previously described routes by their simplicity and convenience of their implementation, the absence of corrosive and irritant reagents, good yield and compliance with the principles of «Green Chemistry».

Fully Conjugated Donor-Acceptor Block Copolymers for Organic Photovoltaics via Heck-Mizoroki Coupling

The development of facile routes to prepare fully conjugated block copolymers (BCPs) from diverse monomers is an important goal for advancing robust bulk-heterojunction (BHJ) organic photovoltaics (OPVs). Herein we introduce a synthetic strategy for step-growth BCPs employing 1,2-bis(trialkylstannyl)ethene as one monomer, which, in addition to offering improved backbone planarity, directly yields a vinylene-terminated macromonomer suitable for Heck-Mizoroki coupling. The benefits of our strategy, which facilitates the preparation of functionalized macromonomers suitable for BCP synthesis, are demonstrated with a representative BCP based on a diketopyrrolopyrrole (DPP) copolymer coded pBDTTDPP as the donor block and a perylenediimide (PDI) copolymer coded as pPDIV as the acceptor block. Feed ratio optimization affords control over the macromonomer chain-end functionalities and allows for the selective formation of a tri-BCP consisting of pPDIV-b-pBDTTDPP-b-pPDIV, which is employed in a single-component BHJ OPV. Devices achieved a power conversion efficiency of 1.51% after thermal stress at 150 °C compared to 0.02% for a control device consisting of a comparable blend of pBDTTDPP and pPDIV. The difference in performance is ascribed to the morphological stability of the BHJ when using the BCP.

Single-step access to a series of D–A π-conjugated oligomers with 3–10 nm chain lengths

A series of five D–A π-conjugated oligo(DPP-co-fluorene)s progressively consisting of 3, 5, 7, 9 and 11 monomers and with chain lengths ranging between 3 and 10 nm have all been synthesized in a single step by direct C–H arylated coupling.

Distinct Photovoltaic Performance of Hierarchical Nanostructures Self-Assembled from Multiblock Copolymers

We applied a multiscale approach coupling dissipative particle dynamics method with a drift-diffusion model to elucidate the photovoltaic properties of multiblock copolymers consisting of alternating electron donor and acceptor blocks. A series of hierarchical lamellae-in-lamellar structures were obtained from the self-assembly of the multiblock copolymers. A distinct improvement in photovoltaic performance upon the morphology transformation from lamella to lamellae-in-lamella was observed. The hierarchical lamellae-in-lamellar structures significantly enhanced exciton dissociation and charge carrier transport, which consequently contributed to the improved photovoltaic performance. On the basis of our theoretical calculations, the hierarchical nanostructures can achieve much enhanced energy conversion efficiencies, improved by around 25% compared with that of general ones, through structure modulation on the number and size of the small-length-scale domains via the molecular design of multiblock copolymers. Our findings are supported by recent experimental evidence and provide guidance for designing advanced photovoltaic materials with hierarchical structures.

Recent Advances in Morphology Optimization for Organic Photovoltaics

Organic photovoltaics are an important part of a next-generation energy-harvesting technology that uses a practically infinite pollutant-free energy source. They have the advantages of light weight, solution processability, cheap materials, low production cost, and deformability. However, to date, the moderate photovoltaic efficiencies and poor stabilities of organic photovoltaics impede their use as replacements for inorganic photovoltaics. Recent developments in bulk-heterojunction organic photovoltaics mean that they have almost reached the lower efficiency limit for feasible commercialization. In this review article, the recent understanding of the ideal bulk-heterojunction morphology of the photoactive layer for efficient exciton dissociation and charge transport is described, and recent attempts as well as early-stage trials to realize this ideal morphology are discussed systematically from a morphological viewpoint. The various approaches to optimizing morphologies consisting of an interpenetrating bicontinuous network with appropriate domain sizes and mixed regions are categorized, and in each category, the recent trends in the morphology control on the multilength scale are highlighted and discussed in detail. This review article concludes by identifying the remaining challenges for the control of active layer morphologies and by providing perspectives toward real application and commercialization of organic photovoltaics.