Selectivity regulation of CO2 photoreduction via the electron configuration of active sites on single-atom photocatalysts

The major challenge in the photocatalytic reduction of CO2 is to achieve high conversion efficiency while maintaining selectivity for a single product. Photocatalysts containing single-metal Cu2+ with 3d9 and Zn2+ with 3d10 on g-C3N4 were prepared using a high-energy ball mill. Single-atom Zn inner electron configuration is stable (3d10) and the peripheral empty orbitals act as electron traps to trap photo-generated electrons and improve the efficiency of charge separation; Zn is an active site to enhance the adsorption and activation of CO2. The stable electron configuration can reduce the energy required for the overall reaction and increase the activity while changing the reaction pathway to form CO. As a result, the 0.5 mol% Zn/g-C3N4 (Zn-CN-0.5) photocatalyst achieves ∼100 % selectivity for the photocatalytic reduction of CO2 to CO at a rate of ∼21.1 μmol·g-1·h-1. In contrast, the 0.5 mol% Cu/g-C3N4 (Cu-CN-0.5) photocatalyst with an unstable electronic structure does not exhibit high selectivity.

Plasmon Au/K-doped defective graphitic carbon nitride for enhanced hydrogen production

Knowledge of the photocatalytic H₂-evolution mechanism is of critical importance for water splitting, and for designing active catalysts for a sustainable energy supply. In this study, we prepared plasmon Au-modified K-doped defective graphitic carbon nitride (Au/KCNx) and then applied it in photocatalytic hydrogen-production tests. The hydrogen-production rate of the Au/KCNx photocatalyst (8.85 mmol g^-1 h^-1) was found to be almost 104 times higher than that of Au/g-C₃N₄ (0.085 mmol g^-1 h^-1), together with an apparent quantum efficiency of 12.8% at 420 nm. It could significantly improve the photocatalytic activities of the Au/KCNx sample, which was attributed to the synergistic effects of the plasmon effect, potassium doping, and nitrogen vacancy. In addition, the Au/KCNx photocatalyst had a large surface area, which was beneficial for photogenerated carrier separation and transfer. The novel strategy proposed here is a potential new method for the development of graphitic carbon nitride photocatalysts with obviously enhanced activities.

Underlying Mechanisms of Reductive Amination on Pd-Catalysts: The Unique Role of Hydroxyl Group in Generating Sterically Hindered Amine

Pd nanospecies supported on porous g-C3N4 nanosheets were prepared for efficient reductive amination reactions. The structures of the catalysts were characterized via FTIR, XRD, XPS, SEM, TEM, and TG analysis, and the mechanisms were investigated using in situ ATR−FTIR spectroscopic analysis complemented by theoretical calculation. It transpired that the valence state of the Pd is not the dominating factor; rather, the hydroxyl group of the Pd(OH)2 cluster is crucial. Thus, by passing protons between different molecules, the hydroxyl group facilitates both the generation of the imine intermediate and the reduction of the C=N unit. As a result, the sterically hindered amines can be obtained at high selectivity (>90%) at room temperature.

In-situ fabrication of 3D hierarchical flower-like β-Bi2O3@CoO Z-scheme heterojunction for visible-driven simultaneous degradation of multi-pollutants

Development of an efficient heterojunction catalyst with a superior visible-light driven activity is regarded as a promising strategy to decontaminate organic wastewater. Herein, a novel direct Z-scheme β-Bi₂O₃@CoO heterojunction was well designed and successfully fabricated by in situ incorporating the two energy band-matched semiconductors. The obtained β-Bi₂O₃@CoO hybrid presented a unique 3D hierarchical structure with a mass of open channels and mesoporous, which afforded not only rapid mass transfer of targets but also good light-harvesting in view of the multiple reflections. Compared to the pristine β-Bi₂O₃ and CoO, the β-Bi₂O₃@CoO hybrid exhibited remarkably improved photocatalytic activity towards the simultaneous degradation of chlorotetracycline (CTC), tetracycline hydrochloride (TCH), oxytetracycline (OTC) and nitrobenzene (NB) under visible-light irradiation. The possible intermediates and degradation pathways were also tracked by mass spectra (MS) analysis. Moreover, a direct Z-scheme charge transfer mechanism in the intimate contact interface between β-Bi₂O₃ and CoO was verified for the improved catalytic activity, endowing the effective separation/transportation of the photo-excited charge carriers and maintenance of the strong redox ability in β-Bi₂O₃@CoO heterojunction. The present work affords a simple approach to design and construct 3D hierarchical direct Z-scheme photocatalysts with promising applications in water environment remediation.

Design of C3 N4 -Based Hybrid Heterojunctions for Enhanced Photocatalytic Hydrogen Production Activity

Semiconductors and metals can form an Ohmic contact with an electric field pointing to the metal, or a Schottky contact with an electric field pointing to the semiconductor. If these two types of heterojunctions are constructed on a single nanoparticle, the two electric fields may cause a synergistic effect and increase the separation rate of the photogenerated electrons and holes. Metal Ni and Ag nanoparticles were successively loaded on the graphitic carbon nitride (g-C₃ N₄ ) surface by precipitation and photoreduction in the hope of forming hybrid heterojunctions on single nanoparticles. TEM/high-resolution TEM images showed that Ag and Ni were loaded on different locations on C₃ N₄ , which indicated that during the photoreduction reaction Ag⁺ obtained electrons from C₃ N₄ in the reduction reaction, whereas oxidation reactions proceeded on Ni nanoparticles. Photocatalytic hydrogen production experiments showed that C₃ N₄ -based hybrid heterojunctions can greatly improve the photocatalytic activity of materials. The possible reason is that two heterojunctions could form a long-range electric field similar to the p-i-n structure in semiconductors. Most of the photogenerated carriers were generated and then separated in this electric field, thereby increasing the separation rate of electrons and holes. This further improved the photocatalytic activity of C₃ N₄ .

Metal-Free Carbon Quantum Dots Implant Graphitic Carbon Nitride: Enhanced Photocatalytic Dye Wastewater Purification with Simultaneous Hydrogen Production

The use of photocatalysts to purify wastewater and simultaneously convert solar energy into clean hydrogen energy is of considerable significance in environmental science. However, it is still a challenge due to their relatively high costs, low efficiencies, and poor stabilities. In this study, a metal-free carbon quantum dots (CQDs) modified graphitic carbon nitride photocatalyst (CCN) was synthesized by a facile method. The characterization and theoretical calculation results reveal that the incorporation of CQDs into the g-C₃N₄ matrix significantly improves the charge transfer and separation efficiency, exhibits a redshift of absorption edge, narrows the bandgap, and prevents the recombination of photoexcited carriers. The hydrogen production and simultaneous degradation of methylene blue (MB) or rhodamine B (RhB) in simulated wastewaters were further tested. In the simulated wastewater, the CCN catalyst showed enhanced photodegradation efficiency, accompanied with the increased hydrogen evolution rate (1291 µmol·h⁻¹·g⁻¹). The internal electrical field between the g-C₃N₄ and the CQDs is the main reason for the spatial separation of photoexcited electron-hole pairs. Overall, this work could offer a new protocol for the design of highly efficient photocatalysts for dye wastewater purification with simultaneous hydrogen production.

Interfaces of graphitic carbon nitride-based composite photocatalysts

This review concentrates on the interface issues of g-C₃N₄-based photocatalysts, including methods for constructing interfaces, techniques for identifying interfaces, and the types and roles of the as-developed interfaces.

Efficient photocatalytic water splitting through titanium silicalite stabilized CoO nanodots

Water can be split into hydrogen (H2) and hydrogen peroxide (H2O2) in an environment-friendly manner through photocatalysis by CoO, which is a promising strategy to alleviate the energy crisis. However, the stability of CoO remains a great challenge because of the oxidation effect of the product H2O2. Herein, titanium silicalite-1 (TS-1) was employed as a framework to obtain and anchor monodisperse CoO nanodots, improve CoO photocatalytic performance, and efficiently separate the oxidizing species from CoO by adsorbing the resulting H2O2. As a result, TS-1 prevented CoO from aggregation, surface oxidation, and rapid inactivation. CoO-TS-1 showed H2 and H2O2 production rates of 1460 μmol h-1 gCoO-1 and 1390 μmol h-1 gCoO-1, respectively, with a high photostability for about 168 h. In addition, the efficiently harvested H2O2 was directly used in the oxidation of cyclohexane to cyclohexanol and cyclohexanone with a selectivity of up to 89.48%. This work paves a new way for the design of an efficient and stable photocatalyst as well as product utilization.

In situ growing of CoO nanoparticles on g-C3N4 composites with highly improved photocatalytic activity for hydrogen evolution

CoO/g-C₃N₄ hybrid catalyst is facilely prepared for application to photocatalytic H₂ evolution from water splitting by the vacuum rotation-evaporation and in situ thermal method. The physical and chemical properties of CoO/g-C₃N₄ are determined by a series of characterization methods. The g-C₃N₄ with 0.6 wt% Co loading exhibits superior photocatalytic hydrogen evolution activity with an H₂ evolution amount of 23.25 mmol g^-1 after 5 h. The obtained 0.6 wt% CoO/g-C₃N₄ can split water to generate 0.39 mmol g^-1 H₂ without sacrificial agent and noble metal, while the pure g-C₃N₄ is inactive under the same reaction conditions. The remarkable enhancement of photocatalytic H₂ evolution activity of CoO/g-C₃N₄ composites is mainly ascribed to the effective separation of electron-hole pairs and charge transfer. The work creates new opportunities for the design of low-cost g-C₃N₄-based photocatalysts with high photocatalytic H₂ evolution activity from overall water splitting.

Cobalt oxide loaded graphitic carbon nitride as adsorptive photocatalyst for tetracycline removal from aqueous solution

The treatment of antibiotic-containing wastewater is of great importance due to the potential threats of antibiotics to human and the ecosystem. We reported the preparation of cobalt oxide loaded graphitic carbon nitride (CoO/g-C₃N₄) by an impregnation-calcination method for tetracycline (TC) removal from aqueous solution. The developed CoO/g-C₃N₄ exhibited high adsorption capacity and fast adsorption kinetic for TC due to the complexation of TC with surface loaded CoO. In particular, 7%CoO/gC₃N₄3 sample presented a maximum TC adsorption capacity of 391.4 mg g^-1. It was found that Langmuir and pseudo-second order kinetic models fitted TC adsorption process well. Further photocatalytic studies showed that CoO loaded g-C₃N₄ was active for TC photodegradation, although the photocatalytic reaction rate constant was lower than that of native g-C₃N₄. CoO nanoparticles loading on g-C₃N₄ played the major role of adsorption sites rather than cocatalyst for photocatalysis. We believe that the developed CoO/g-C₃N₄ could be a potential adsorptive photocatalyst for antibiotic pollutants removal from wastewater.

Moderate NaNO2 etching enables easy crystallinity optimization of g-C3N4 with superior photoreduction performance

An economical and general method to fabricate g-C₃N₄ with high crystallinity and excellent photocatalytic properties is developed, in which cheap sodium nitrite aqueous solution is utilized as a moderate etching agent.

Protonated carbon nitride nanosheet supported IrO2 quantum dots for pure water splitting without sacrificial reagents

A novel photocatalyst with IrO₂ quantum dots anchored on g-C₃N₄ exhibits enhanced visible-light-driven overall water splitting.

High-performance NiO/g-C3N4 composites for visible-light-driven photocatalytic overall water splitting

NiO/g-C₃N₄ as a photocatalyst achieves efficient visible-light-driven overall water splitting without a sacrificial agent.