Chronicles of plutonium peroxides: spectroscopic characterization of a new peroxo compound of Pu(IV)

Although hydrogen peroxide (H2O2) has been highly used in nuclear chemistry for more than 75 years, the preparation and literature description of tetravalent actinide peroxides remain surprisingly scarce. A new insight is given in this topic through the synthesis and thorough structural characterization of a new peroxo compound of Pu(IV).

Synthesis and multi-scale properties of PuO2 nanoparticles: recent advances and open questions

Due to the increased attention given to actinide nanomaterials, the question of their structure-property relationship is on the spotlight of recent publications. Plutonium oxide (PuO₂) particularly plays a central role in nuclear energetics and a comprehensive knowledge about its properties when nanosizing is of paramount interest to understand its behaviour in environmental migration schemes but also for the development of advanced nuclear energy systems underway. The element plutonium further stimulates the curiosity of scientists due to the unique physical and chemical properties it exhibits around the periodic table. PuO₂ crystallizes in the fluorite structure of the face-centered cubic system for which the properties can be significantly affected when shrinking. Identifying the formation mechanism of PuO₂ nanoparticles, their related atomic, electronic and crystalline structures, and their reactivity in addition to their nanoscale properties, appears to be a fascinating and challenging ongoing topic, whose recent advances are discussed in this review.

A Coupled EXAFS-Molecular Dynamics Study on PuO2+ and NpO2+ Hydration: The Importance of Electron Correlation in Force-Field Building

The physicochemical properties of the monovalent actinyl cations, PuO₂⁺ and NpO₂⁺, in water have been studied by means of classical molecular dynamic simulations. A specific set of cation-water intermolecular potentials based on ab initio potential energy surfaces has been built on the basis of the hydrated ion concept. The TIP4P water model was adopted. Given the paramagnetic character of these actinyls, the cation-water interaction energies were computed from highly correlated wave functions using the NEVPT2 method. It is shown that the multideterminantal character of the wave function has a relevant effect on the main distances of the hydrated molecular cations. Several structural, dynamical, and energetic properties of the aqueous solutions have been obtained and analyzed. Structural RDF analysis gives An-O_yl distances of 1.82 and 1.84 Å and An-O(water) distances of 2.51 and 2.53 Å for PuO₂⁺ and NpO₂⁺ in water, respectively. Experimental EXAFS spectra from dilute aqueous solutions of PuO₂⁺ and NpO₂⁺ are revisited and analyzed, assuming tetra- and pentahydration of the actinyl cations. Simulated EXAFS spectra have been computed from the snapshots of the MD simulations. Good agreement with the experimental information available is found. The global analysis leads us to conclude that both PuO₂⁺ and NpO₂⁺ cations in water are stable pentahydrated aqua ions.

Force Field Parameterization of Actinyl Molecular Cations Using the 12-6-4 Model

In this work, a set of 12-6-4 force fields (FFs) parameters were developed for the actinyl molecular cations, AnO2n+ (n = 1, 2), from uranium to plutonium for classical molecular dynamics (MD) for four water models: TIP3P, SPC/E, OPC3, and TIP4Pew. Such a non-bonded potential model taking into account the induced dipole between the metallic center and the surrounding molecules has shown better performances for various cations than the classic 12-6 non-bonded potentials. The parametrization method proposed elsewhere for metallic cations has been extended to these molecular cations. In contrast to the actinyl 12-6 FFs from the literature, the new models reproduce correctly both solvation and thermodynamic properties, thanks to the inclusion of the induced dipole term (C4). The transferability of such force fields was assessed by performing MD simulations of carbonato actinyl species, which are highly implicated in actinide migration or actinide extraction from seawater. A highly satisfying agreement was found when comparing the EXAFS signals computed from our MD simulation to the experimental ones. The set of FFs developed here opens new possibilities for the study of actinide chemistry.

Sonochemistry of actinides: from ions to nanoparticles and beyond

Sonochemistry studies chemical and physical effects in liquids submitted to power ultrasound. These effects arise not from a direct interaction of molecules with sound waves, but rather from the acoustic cavitation: the nucleation, growth, and implosive collapse of microbubbles in liquids submitted to power ultrasound. The violent implosion of bubbles leads to the formation of chemically reactive species. In principle, each cavitation bubble can be considered as a microreactor initiating chemical reactions at mild conditions. In addition, microjets and shock waves accompanied bubble collapse produce fragmentation, dispersion and erosion of solid surfaces or particles. Microbubbles oscillating in liquids also enable nucleation and precipitation of nanosized actinide compounds with specific morphology. This review focuses on the versatile sonochemical processes with actinide ions and particles in homogenous solutions and heterogenous systems. The redox reactions in aqueous solutions, dissolution or precipitation of refractory solids, synthesis of actinide nanoparticles, and ultrasonically driving decontamination are considered. The guideline for further research is also discussed.

High-energy resolution X-ray spectroscopy at actinide M4,5 and ligand K edges: what we know, what we want to know, and what we can know

In recent years, scientists have progressively recognized the role of electronic structures in the characterization of chemical properties for actinide containing materials. High-energy resolution X-ray spectroscopy at the actinide M4,5 edges emerged as a promising direction because this method can probe actinide properties at the atomic level through the possibility of reducing the experimental spectral width below the natural core-hole lifetime broadening. Parallel to the technical developments of the X-ray method and experimental discoveries, theoretical models, describing the observed electronic structure phenomena, have also advanced. In this feature article, we describe the latest progress in the field of high-energy resolution X-ray spectroscopy at the actinide M4,5 and ligand K edges and we show that the methods are able to (a) provide fingerprint information on the actinide oxidation state and ground state characters (b) probe 5f occupancy, non-stoichiometry, defects, and ligand/metal ratio and (c) investigate the local symmetry and effects of the crystal field. We discuss the chemical aspects of the electronic structure in terms familiar to chemists and materials scientists and conclude with a brief description of new opportunities and approaches to improve the experimental methodology and theoretical analysis for f-electron systems.

X-ray absorption spectroscopy and actinide electrochemistry: a setup dedicated to radioactive samples applied to neptunium chemistry

A spectroelectrochemical setup has been developed to investigate radioactive elements in small volumes (0.7 to 2 ml) under oxidation-reduction (redox) controlled conditions by X-ray absorption spectroscopy (XAS). The cell design is presented together with in situ XAS measurements performed during neptunium redox reactions. Cycling experiments on the NpO22+/NpO2+ redox couple were applied to qualify the cell electrodynamics using XANES measurements and its ability to probe modifications in the neptunyl hydration shell in a 1 mol l-1 HNO3 solution. The XAS results are in agreement with previous structural studies and the NpO22+/NpO2+ standard potential, determined using Nernst methods, is consistent with measurements based on other techniques. Subsequently, the NpO2+, NpO22+ and Np4+ ion structures in solution were stabilized and measured using EXAFS. The resulting fit parameters are again compared with other results from the literature and with theoretical models in order to evaluate how this spectroelectrochemistry experiment succeeds or fails to stabilize the oxidation states of actinides. The experiment succeeded in: (i) implementing a robust and safe XAS device to investigate unstable radioactive species, (ii) evaluate in a reproducible manner the NpO22+/NpO2+ standard potential under dilute conditions and (iii) clarify mechanistic aspects of the actinyl hydration sphere in solution. In contrast, a detailed comparison of EXAFS fit parameters shows that this method is less appropriate than the majority of the previously reported chemical methods for the stabilization of the Np4+ ion.

The missing pieces of the PuO2 nanoparticle puzzle

The nanoscience field often produces results more mystifying than any other discipline. It has been argued that changes in the plutonium dioxide (PuO₂) particle size from bulk to nano can have a drastic effect on PuO₂ properties. Here we report a full characterization of PuO₂ nanoparticles (NPs) at the atomic level and probe their local and electronic structures by a variety of methods available at the synchrotron, including extended X-ray absorption fine structure (EXAFS) at the Pu L₃ edge, X-ray absorption near edge structure (XANES) in high energy resolution fluorescence detection (HERFD) mode at the Pu L₃ and M₄ edges, high energy X-ray scattering (HEXS) and X-ray diffraction (XRD). The particles were synthesized from precursors with different oxidation states of plutonium (III, IV, and V) under various environmentally and waste storage relevant conditions (pH 8 and pH > 10). Our experimental results analyzed with state-of-the-art theoretical approaches demonstrate that well dispersed, crystalline NPs with a size of ∼2.5 nm in diameter are always formed in spite of diverse chemical conditions. Identical crystal structures and the presence of only the Pu(iv) oxidation state in all NPs, reported here for the first time, indicate that the structure of PuO₂ NPs is very similar to that of the bulk PuO₂. All methods give complementary information and show that investigated fundamental properties of PuO₂ NPs, rather than being exotic, are very similar to those of the bulk PuO₂.

Probing the local structure of nanoscale actinide oxides: a comparison between PuO2 and ThO2 nanoparticles rules out PuO2+x hypothesis

Actinide research at the nanoscale is gaining fundamental interest due to environmental and industrial issues. The knowledge of the local structure and speciation of actinide nanoparticles, which possibly exhibit specific physico-chemical properties in comparison to bulk materials, would help in a better and reliable description of their behaviour and reactivity. Herein, the synthesis and relevant characterization of PuO₂ and ThO₂ nanoparticles displayed as dispersed colloids, nanopowders, or nanostructured oxide powders allow to establish a clear relationship between the size of the nanocrystals constituting these oxides and their corresponding An(iv) local structure investigated by EXAFS spectroscopy. Particularly, the first oxygen shell of the probed An(iv) evidences an analogous behaviour for both Pu and Th oxides. This observation suggests that the often observed and controversial splitting of the Pu-O shell on the Fourier transformed EXAFS signal of the PuO₂ samples is attributed to a local structural disorder driven by a nanoparticle surface effect rather than to the presence of PuO_2+x species.

A Novel Metastable Pentavalent Plutonium Solid Phase on the Pathway from Aqueous Plutonium(VI) to PuO2 Nanoparticles

Here we provide evidence that the formation of PuO2 nanoparticles from oxidized PuVI under alkaline conditions proceeds through the formation of an intermediate PuV solid phase, similar to NH4 PuO2 CO3 , which is stable over a period of several months. For the first time, state-of-the-art experiments at Pu M4 and at L3 absorption edges combined with theoretical calculations unambiguously allow to determine the oxidation state and the local structure of this intermediate phase.

An eco-compatible pathway to the synthesis of mono and bis-multisubstituted imidazoles over novel reusable ionic liquids: an efficient and green sonochemical process

Novel and environmentally benign ionic liquids are synthesized and used as robust catalysts for a sonochemical one pot multi-component synthetic route to functionalized annulated imidazoles in water with excellent yields.