Accurate, affordable, and easy electrochemical detection of ascorbic acid in fresh fruit juices and pharmaceutical samples using an electroactive gelatin sulfonamide

In this study, we demonstrated how to design and construct a highly specific and sensitive sensor capable of rapidly and accurately detecting ascorbic acid (AA). A sulfonamide derivative (S) acting as a novel monomer was synthesized through an aldol condensation reaction. Subsequently, a free radical-mediated grafting polymerization approach was used to create a new generation of gelatin (Gel) grafted with poly sulfonamide derivative (Gel-g-PS). The graft percentage (GP%) was 60 ± 0.5% with a conversion rate of 98.3%. Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) were utilized to confirm the formation of Gel-g-PS. The developed gelatin sulfonamide modified screen printed electrode (Gel-g-PS/SPE) was employed for the determination of ascorbic acid (AA) in fruit juices and pharmaceutical samples. Gel-g-PS/SPE showed excellent electrochemical catalytic activities toward AA oxidation compared to bare (unmodified) SPE. Ascorbic acid displayed a sensitive oxidation peak at 0.35 V using the differential pulse voltammetry technique. Under optimized experimental conditions, the two linear ranges for AA detection were obtained to be from 0.2-5 ppb and 20-600 ppb, with a limit of detection (LoD) of 0.03 ppb and a limit of quantification (LoQ) of 0.11 ppb. The proposed Gel-g-PS modified SPE surface demonstrated good selectivity, stability, reproducibility, and repeatability as well as a good recovery rate in fresh fruit juices and pharmaceutical samples.

A novel Au-NPs/DBTTA nanocomposite-based electrochemical sensor for the detection of ascorbic acid (AA)

Purpose

Ascorbic acid, a water-soluble antioxidant, is an essential component of the human diet and is known for its potent antioxidant properties against several diseases. In recent years, there has been increasing interest in the development of nonenzymatic sensors due to their simplicity, efficiency and excellent selectivity. The aim of this study is to present a selective and sensitive method for the detection of ascorbic acid in aqueous system using a new electrochemical non-enzymatic sensor based on a gold nanoparticles Au-NPs-1,3-di(4-bromophényl)-5-tert-butyl-1,3,5-triazinane (DBTTA) composite.

Design/methodology/approach

Using the square wave voltammetry (SWV) technique, a series of Au-NPs-DBTTA composites were successfully developed and investigated. First, DBTTA was synthesized via the condensation of tert-butylamine and a4-bromoaniline. The structure obtained was identified by IR, 1H NMR and 13C NMR analysis. A glassy carbon electrode (GCE) was modified with 10–1 M DBTTA dissolved in an aqueous solution by cyclic voltammetry in the potential range of 1–1.4 V. Au-NPs were then deposited on the DBTTA/GCE by a chronoamperometric technique. SWV was used to study the electrochemical behavior of the modified electrode (DBTTA/Au-NPs/GCEs). To observe the effect of nanoparticles, ascorbic acid in a buffer solution was analyzed by SWV at the modified electrode with and without gold nanoparticles (Au-NPs).

Findings

The DBTTA/Au-NPs/GCE showed better electroanalytical results. The detection limit of 10–5 M was obtained and the electrode was proportional to the logarithm of the AA concentration in the range of 5 × 10−3 M to 1 × 10−1 with very good correlation parameters.

Originality/value

It was also found that the elaborated sensor exhibited reproducibility and excellent selectivity against interfering molecules such as uric acid, aspartic acid and glucose. The proposed sensor was tested for the recognition of AA in orange, and satisfactory results were obtained.

MoS2-based nanocomposites for cancer diagnosis and therapy

Molybdenum is a trace dietary element necessary for the survival of humans. Some molybdenum-bearing enzymes are involved in key metabolic activities in the human body (such as xanthine oxidase, aldehyde oxidase and sulfite oxidase). Many molybdenum-based compounds have been widely used in biomedical research. Especially, MoS2-nanomaterials have attracted more attention in cancer diagnosis and treatment recently because of their unique physical and chemical properties. MoS2 can adsorb various biomolecules and drug molecules via covalent or non-covalent interactions because it is easy to modify and possess a high specific surface area, improving its tumor targeting and colloidal stability, as well as accuracy and sensitivity for detecting specific biomarkers. At the same time, in the near-infrared (NIR) window, MoS2 has excellent optical absorption and prominent photothermal conversion efficiency, which can achieve NIR-based phototherapy and NIR-responsive controlled drug-release. Significantly, the modified MoS2-nanocomposite can specifically respond to the tumor microenvironment, leading to drug accumulation in the tumor site increased, reducing its side effects on non-cancerous tissues, and improved therapeutic effect. In this review, we introduced the latest developments of MoS2-nanocomposites in cancer diagnosis and therapy, mainly focusing on biosensors, bioimaging, chemotherapy, phototherapy, microwave hyperthermia, and combination therapy. Furthermore, we also discuss the current challenges and prospects of MoS2-nanocomposites in cancer treatment.

A novel nonenzymatic ascorbic acid electrochemical sensor based on gold nanoparticals-chicken egg white-copper phosphate-graphene oxide hybrid nanoflowers

Au-CEW-Cu₃(PO₄)₂-GO nanoflowers (HNFs), which were assembled of gold nanoparticals (Au NPs), chicken egg white (CEW), copper phosphate (Cu₃(PO₄)₂) and graphene oxide (GO) together to form a flower-like organic/inorganic hybrid nanocomposite, were synthesized through a simple and gentle one-pot co-precipitation method. The prepared samples were well characterized by scanning electron microscope, transmission electron microscope, energy dispersive x-ray spectrometer, x-ray diffraction and Raman spectrometer. The prepared Au-CEW-Cu₃(PO₄)₂-GO HNFs was used to modify glassy carbon electrode to fabricate an electrochemical sensor for detection of ascorbic acid (AA). The electrochemical test results show that the linear range of the developed sensor is 8-300μM and the detection limit is 2.67μM (S/N = 3). While this sensor displays high sensitivity of 6.01 × 10^-3μAμM^-1cm^-2and low detection potential of 35 mV due to the combination of the high conductivity of Au NPs, the larger specific surface area of GO and the intrinsic electrocatalytic activity of CEW-Cu₃(PO₄)₂HNFs. Moreover, the Au-CEW-Cu₃(PO₄)₂-GO HNFs-based sensor was successfully developed for application in electrochemical detection of AA in vitamin C tablets.

Cobalt Phosphide (Co2P) with Notable Electrocatalytic Activity Designed for Sensitive and Selective Enzymeless Bioanalysis of Hydrogen Peroxide

In this work, cobalt phosphide nanoparticles (Co₂P NPs) were prepared by simple and mild hydrothermal method without the use of harmful phosphorous source. The morphological structure and surface component of Co₂P were characterized by transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy measurements. Considering the excellent electrocatalytic reduction activity and good electrical conductivity of transition-metal phosphide, we fabricated Co₂P NPs on indium tin oxide (ITO) substrate (Co₂P/ITO) for H₂O₂ detection. The Co₂P/ITO transducer displayed a rapid amperometric response less than 5 s, a broader response range from 0.001 to 10.0 mM and a low detection limit of 0.65 μM. In addition, the non-enzymatic Co₂P/ITO sensor showed outstanding selectivity, reproducibility, repeatability and stability, all of which qualified the Co₂P/ITO electrode for quite a reliable and promising biosensor for H₂O₂ sensing.

Modulating physicochemical properties in Gd3+@Yb2O3 nanospheres for efficient electrochemical monitoring of H2O2

Herein, a uniform spherical shaped Gd(III) doped Yb₂O₃ (Gd@Yb₂O₃) nanoparticles (NPs) was successfully synthesized via hydrothermal method for electrochemical detection of H₂O₂. The calcination effect and porosity of the materials well elaborated in the present work. The optical properties, size, morphological, thermal, sensing, surface and crystalline properties of synthesized materials were examined by several techniques. The enhanced electrocatalytic performance of Gd@Yb₂O₃ make the present sensor excellent towards the determination of H₂O₂.The anodic and cathodic peak current increased regularly with addition of H₂O₂ solution. The electrode coating surface was stable even after a number of electrochemical cycles and have high limit of detection (51 nM). Moreover, the present sensor was successfully employed for detection of H₂O₂ in real samples.

Modified Ti3C2 nanosheets as peroxidase mimetics for use in colorimetric detection and immunoassays

Since being discovered in 2011, a large class of two-dimensional materials, labeled MXenes, has received increased research enthusiasm both theoretically and experimentally due to the unique physical, optical and electrical properties. Here, we prepared few-layered Ti3C2 nanosheets by a facile two-step liquid exfoliation method and, for the first time, demonstrated their intrinsic peroxidase-like activity in a Ti3C2-TMB-H2O2 system. The as-produced Ti3C2 nanosheets, especially after histidine modification, were characterized with excellent water dispersibility, large specific surface area, and high stability, which contribute to their much higher affinity to both substrates when compared to HRP. We have also established the catalytic mechanism whereby Ti3C2 nanosheets, where Ti switched spontaneously from an oxidized to reduced state, promoted the electron transfer from TMB to H2O2. Given the color reaction of Ti3C2 nanosheets, we have fabricated a colorimetric paper-based sensor integrated with a smartphone to detect glucose and an immunoassay to detect IR-β, enabling Ti3C2 nanosheets to be a powerful tool in the biodetection field.

Construction of a sensitive electrochemical sensor based on 1T-MoS2 nanosheets decorated with shape-controlled gold nanostructures for the voltammetric determination of doxorubicin

An innovative and portable design to fabricate an electrochemical sensor based on metallic phase MoS₂ (1T-MoS₂) decorated with shape-dependent gold nanostructures for the determination of doxorubicin (DOX) is presented. In this context, homogenous and uniform single-crystal gold nanospheres (AuNSPs) and nanorods (AuNRDs) were firstly synthesized by seeded growth approach. Afterwards, AuNSPs and AuNRDs were anchored on 1T-MoS₂ surfaces to construct the desired electrochemical sensing platform towards the DOX assay. 1T-MoS₂ was exfoliated by metal intercalation process using NaK metal alloys. The structure and surface morphology of 1T-MoS₂, AuNSPs, and AuNRDs were characterized by XPS, Raman, UV-vis, TEM, and SEM. The electrochemical behavior of DOX using various MoS₂-based electrochemical sensors prepared on screen-printed electrode (SPE) was examined by cyclic voltammetry and adsorptive stripping differential pulse voltammetry. The electrocatalytic efficiency of AuNRDs on 1T-MoS₂ was also compared with that of AuNSPs on 1T-MoS₂, and it showed much better electrocatalytic activity towards the DOX. A nanocomposite prepared with AuNRDs and 1T-MoS₂ on SPE (AuNRDs/1T-MoS₂/SPE) exhibited a linear relationship between peak current and DOX concentration in the range 0.01-9.5 μM with a detection limit of 2.5 nM. The AuNRDs/1T-MoS₂/SPE was successfully applied to the sensitive and rapid determination of DOX in spiked human serum samples with satisfactory recoveries in the range 99.2-100.8%. Graphical abstract Schematic representation of a portable design for electrochemical sensor based on shape-controlled gold nanostructures decorated on metallic phase molybdenum disulfide (1T-MoS₂) towards the sensitive determination of doxorubicin.

A Sensitive Electrochemical Ascorbic Acid Sensor Using Glassy Carbon Electrode Modified by Molybdenite with Electrodeposited Methylene Blue

A non-enzymatic amperometric sensor using natural molybdenite (MLN) electrodeposited with methylene blue (MB) has been fabricated and characterized and its analytical performances were investigated for the determination of ascorbic acid (AA). The surface morphology of the electrode modified by electrodeposited MB was studied by use of the Advanced Mineral Identification and Characterization System (AMICS) and laser confocal high-temperature scanning microscope (LCSM). The poly(MB) and MLN immobilized sensor showed good stability, reproducibility, sensitivity, and selectivity. It exhibited a linear performance range from 3 to 1000 μM, with a lower detection limit of 0.083 μM (signal/noise = 3) and short response time (< 5 s). No obvious decrease in the current was observed after 20 days storage. The methodology reproducibility of this sensor was 2.6%. It showed good anti-interference ability for the potential interfering compounds. The poly(MB) film not only can enhance the electron-transfer rate but also increase the lifetime of the sensor. This study demonstrated the applicability of natural molybdenite for the fabrication of non-enzymatic electrochemical AA sensor.

2D Materials in Development of Electrochemical Point-of-Care Cancer Screening Devices

Effective cancer treatment requires early detection and monitoring the development progress in a simple and affordable manner. Point-of care (POC) screening can provide a portable and inexpensive tool for the end-users to conveniently operate test and screen their health conditions without the necessity of special skills. Electrochemical methods hold great potential for clinical analysis of variety of chemicals and substances as well as cancer biomarkers due to their low cost, high sensitivity, multiplex detection ability, and miniaturization aptitude. Advances in two-dimensional (2D) material-based electrochemical biosensors/sensors are accelerating the performance of conventional devices toward more practical approaches. Here, recent trends in the development of 2D material-based electrochemical biosensors/sensors, as the next generation of POC cancer screening tools, are summarized. Three cancer biomarker categories, including proteins, nucleic acids, and some small molecules, will be considered. Various 2D materials will be introduced and their biomedical applications and electrochemical properties will be given. The role of 2D materials in improving the performance of electrochemical sensing mechanisms as well as the pros and cons of current sensors as the prospective devices for POC screening will be emphasized. Finally, the future scopes of implementing 2D materials in electrochemical POC cancer diagnostics for the clinical translation will be discussed.

Electrochemical Sensor of Double-Thiol Linked PProDOT@Si Composite for Simultaneous Detection of Cd(II), Pb(II), and Hg(II)

Heavy metal ions in water, cosmetics, and arable land have become a world-wide issue as they cause a variety of diseases and even death to humans and animals when a certain level is exceeded. Therefore, it is necessary to development a new kind of sensor material for the determination of heavy metal ions. In this paper, we present an electrochemical sensor based on composite material (thiol(-SH) grafted poly(3,4-proplenedioxythiophene) (PProDOT(MeSH)₂)/ porous silicon spheres (Si) composite, denoted as PProDOT(MeSH)₂@Si) from the incorporation of thiol(-SH) grafted poly(3,4-proplenedioxythiophene) (PProDOT(MeSH)₂) with porous silicon spheres (Si) for the electrochemical detection of heavy metal ions (Cd(II), Pb(II), and Hg(II)). The PProDOT(MeSH)₂@Si composite was synthesized via a chemical oxidative polymerization method. The structure and morphology of PProDOT(MeSH)₂@Si composite were characterized by Fourier transform infrared (FT-IR), Ultraviolet-visible spectroscopy (UV-Vis), X-ray diffraction (XRD), scanning electron microscope (SEM), Transmission electron microscope (TEM), and Brunauer-Emmett-Teller (BET). Furthermore, the electrochemical performance of PProDOT(MeSH)₂@Si was evaluated by detecting of Cd(II), Pb(II), and Hg(II) ions using the differential pulse voltammetry (DPV) method. The relationship between structural properties and the electrochemical performance was systematically studied. The results showed that the entry of two thiol-based chains to the monomer unit resulted in an increase in electrochemical sensitivity in PProDOT(MeSH)_2, which was related to the interaction between thiol group(-SH) and heavy metal ions. And, the combination of PProDOT(MeSH)₂ with Si could improve the electrocatalytic efficiency of the electrode material. The PProDOT(MeSH)₂@Si/GCE exhibited high selectivity and sensitivity in the rage of 0.04 to 2.8, 0.024 to 2.8, and 0.16 to 3.2 μM with the detection limit of 0.00575, 0.0027, and 0.0017 µM toward Cd(II), Pb(II), and Hg(II), respectively. The interference studies demonstrated that the PProDOT(MeSH)₂@Si/GCE possessed a low mutual interference and high selectivity for simultaneous detection of Cd(II), Pb(II), and Hg(II) ions.

Recent advances in molybdenum disulfide-based electrode materials for electroanalytical applications

The primary objective of this review article is to summarize the development and structural diversity of 2D/3D molybdenum disulfide (MoS₂) based modified electrodes for electrochemical sensors and biosensor applications. Hydrothermal, mechanical, and ultrasonic techniques and solution-based exfoliation have been used to synthesize graphene-like 2D MoS₂ layers. The unique physicochemical properties of MoS₂ and its nanocomposites, including high mechanical strength, high carrier transport, large surface area, excellent electrical conductivity, and rapid electron transport rate, render them useful as efficient transducers in various electrochemical applications. The present review summarizes 2D/3D MoS₂-based nanomaterials as an electrochemical platform for the detection and analysis of various biomolecules (e.g., neurotransmitters, NADH, glucose, antibiotics, DNA, proteins, and bacteria) and hazardous chemicals (e.g., heavy metal ions, organic compounds, and pesticides). The substantial improvements that have been achieved in the performance of enzyme-based amperometry, chemiluminescence, and nucleic acid sensors incorporating MoS₂-based chemically modified electrodes are also addressed. We also summarize key sensor parameters such as limits of detection (LODs), sensitivity, selectivity, response time, and durability, as well as real applications of the sensing systems in the environmental, pharmaceutical, chemical, industrial, and food analysis fields. Finally, the remaining challenges in designing MoS₂ nanostructures suitable for electroanalytical applications are outlined. Graphical abstract • MoS₂ based materials exhibit high conductivity and improved electrochemical performance with great potential as a sensing electrode. • The role of MoS₂ nanocomposite films and their detection strategies were reviewed. • Biomarkers detection for disease identification and respective clinical treatments were discussed. • Future Challenges, as well as possible research development for "MoS₂ nanocomposites", are suggested.

Sensitive detection of ascorbic acid using screen-printed electrodes modified by electroactive melanin-like nanoparticles

In this work, we report on the design of an enzyme-less sensitive and selective electrochemical electrode for ascorbic acid (AA) detection using a modified screen-printed electrode of melanin-like nanoparticles (Mel-NPs). Cyclic voltammetry shows that the melanin-modified electrode exhibits high electrocatalytic activity for ascorbic acid. The melanin-like nanoparticles serve as a shuttle to transport electrons from ascorbic acid to the electrode surface. The modified electrode is endowed with a large dynamic window ranging from 5 to 500 ppb. The detection and quantification limits were estimated to be 0.07 and 0.23 ppb, respectively. The modified electrode was successfully used to determine AA in human blood serum, urine and saliva with satisfactory recovery levels.

A melanin-like nanoparticle modified screen-printed electrode for enzyme-less detection of ascorbic acid.