Asymmetric Photoaerobic Lactonization and Aza-Wacker Cyclization of Alkenes Enabled by Ternary Selenium-Sulfur Multicatalysis

An adaptable, sulfur-accelerated photoaerobic selenium-π-acid ternary catalyst system for the enantioselective allylic redox functionalization of simple, nondirecting alkenes is reported. In contrast to related photoredox catalytic methods, which largely depend on olefinic substrates with heteroatomic directing groups to unfold high degrees of stereoinduction, the current protocol relies on chiral, spirocyclic selenium-π-acids that covalently bind to the alkene moiety. The performance of this ternary catalytic method is demonstrated in the asymmetric, photoaerobic lactonization and cycloamination of enoic acids and unsaturated sulfonamides, respectively, leading to an averaged enantiomeric ratio (er) of 92:8. Notably, this protocol provides for the first time an asymmetric, catalytic entryway to pharmaceutically relevant 3-pyrroline motifs, which was used as a platform to access a 3,4-dihydroxyproline derivative in only seven steps with a 92:8 er.

Deoxygenative Hydroboration of Aromatic Nitro Compounds Catalyzed by Tetra(diisopropylamido) Rare-Earth Metal-Lithium Bimetallic Complexes

The first example of the reduction of a nitro compound with HBPin catalyzed by tetra(diisopropylamido) rare-earth metal-lithium bimetallic complexes LiRE(NiPr2)4(THF) (RE = La, Nd, Sm, Gd, and Y) was disclosed. A series of aromatic nitro compounds were reduced to N-borylamines in high yields (up to 99%). The derivatives of N-borylamines─amides and carbamates─were obtained in a sequential one-pot manner. Furthermore, kinetic studies of the deoxygenative hydroboration of nitro compounds were carried out.

Tertiary Amine-Mediated Reductions of Phosphine Oxides to Phosphines

The reduction of phosphine oxides without the use of highly reactive reductants represents a safer and more sustainable solution for recycling of organophosphorus compounds. Herein, we disclose an N,N,N',N'-tetramethylethylenediamine (TMEDA)-mediated reduction via an unusual intermolecular hydride transfer. Mechanistic studies suggest that TMEDA serves as a hydride donor, while the P(V) halophosphonium salt acts as the hydride acceptor. This methodology provides a scalable and efficient protocol to reduce phosphine oxides under mild conditions.

Reusable Cobalt-Catalyzed Selective Transfer Hydrogenation of Azoarenes and Nitroarenes

Herein, control transfer hydrogenation (TH) of azoarenes to hydrazo compounds is established employing easy-to-synthesize reusable cobalt catalyst using lower amounts of N₂H₄·H₂O under mild conditions. With this effective methodology, a library of symmetrical and unsymmetrical azoarene derivatives was successfully converted to their corresponding hydrazo derivatives. Further, this protocol was extended to the TH of nitroarenes to amines with good-to-excellent yields. Several kinetic studies along with Hammett studies were carried out to understand the plausible mechanism and the electronic effects in this transformation. This inexpensive catalyst can be recycled up to five times without considerable loss of catalytic activity.

An Iodide-Mediated Anodic Amide Coupling

The ubiquity of amide bonds, present in natural products and common pharmaceuticals renders this functional group one of the most prevalent in organic chemistry. Despite its importance and a wide variety of existing methods for its formation, the latter still can be a challenge for classical activating reagents such as chloridating agents or carbodiimides. As the spent reagents often cannot be recycled, the development of more sustainable methods is highly desirable. Herein, we report an operationally simple and mild indirect electrochemical protocol to effect the condensation of carboxylic acids with amines, forming a wide variety of carboxamides.

Synthesis of (Deoxy)difluoromethylated Phosphines by Reaction of R2P(O)H with TMSCF3 and Their Application in Cu(I) Clusters in Sonogashira Coupling

R₂PCF₂H ligands and their R₂P(O)CF₂H precursors were synthesized from R₂P(O)H with TMSCF₃ by simply modulating the H₂O concentration via deoxydifluoromethylation and difluoromethylation. The air sensitive R₂PCF₂H phosphines can be stabilized in Cu(I) clusters as ligands. Within these Cu(I) clusters, the Sonogashira cross-coupling reaction can proceed fast and efficiently using terminal alkynes and aryl iodides within 15 min at room temperature under air to give a variety of diaryl(alkyl)acetylenes in good yields (49 examples, yields of ≤99%). Six of the internal alkynes present in drug precursors can be obtained using this protocol in good yields. The mechanism is proposed on the basis of control experiments.

Biphasic electrochemical peptide synthesis

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint. To overcome this issue, we report an electrochemical peptide synthesis in a biphasic system. Anodic oxidation of triphenylphosphine (Ph₃P) generates a phosphine radical cation, which serves as the coupling reagent to activate carboxylic acids, and produces triphenylphosphine oxide (Ph₃P Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O) as a stoichiometric byproduct. In combination with a soluble tag-assisted liquid-phase peptide synthesis, the selective recovery of desired peptides and Ph₃PO was achieved. Given that methods to reduce Ph₃PO to Ph₃P have been reported, Ph₃PO could be a recyclable byproduct unlike byproducts from typical coupling reagents. Moreover, a commercial peptide active pharmaceutical ingredient (API), leuprorelin, was successfully synthesized without the use of traditional coupling reagents.

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint.

Easy Access to Versatile Catalytic Systems for C-H Activation and Reductive Amination Based on Tetrahydrofluorenyl Rhodium(III) Complexes

On the basis of the 1,2,3,4-tetrahydrofluorenyl ligand, a simple approach was developed to new effective rhodium catalysts for the construction of C-C and C-N bonds. The halide compounds [(η⁵ -tetrahydrofluorenyl)RhX₂ ]₂ (2 a: X=Br; 2 b: X=I) were synthesized by treatment of the bis(ethylene) derivative (η⁵ -tetrahydrofluorenyl)Rh(C₂ H₄ )₂ (1 a) with halogens. An analogous reaction of the cyclooctadiene complex (η⁵ -tetrahydrofluorenyl)Rh(cod) (1 b) with I₂ is complicated by the side formation of [(cod)RhI]₂ . The reaction of 2 b with 2,2'-bipyridyl leads to cation [(η⁵ -tetrahydrofluorenyl)Rh(2,2'-bipyridyl)I]⁺ (3). The halide abstraction from 2 a,b with thallium or silver salts allowed us to prepare sandwich compounds with incoming cyclopentadienyl, dicarbollide and mesityleneligands [(η⁵ -tetrahydrofluorenyl)RhCp]⁺ (4), (η⁵ -tetrahydrofluorenyl)Rh(η-7,8-C₂ B₉ H₁₁ ) (5), and [(η⁵ -tetrahydrofluorenyl)Rh(η-mesitylene)]²⁺ (6). The structures of 1 b, 2 b ⋅ 2I₂ , 3PF₆ , 4TlI₄ , 5, and [(cod)RhI]₂ were determined by X-ray diffraction. Compounds 2 a,b efficiently catalyze the oxidative coupling of benzoic acids with alkynes to selectively give isocoumarins or naphthalenes, depending on the reaction temperature. Moreover, they showed moderate catalytic activity in other annulations of alkynes with aromatic compounds (such as benzamide, acetanilide, etc.) which proceed through CH activation. Compound 2 b also effectively catalyzes the reductive amination of aldehydes and ketones in the presence of carbon monoxide and water via water-gas shift reaction, giving amines in high yields (67-99 %).

Rhodium-terpyridine Catalyzed Transfer Hydrogenation of Aromatic Nitro Compounds in Water

A rhodium terpyridine complex catalyzed transfer hydrogenation of nitroarenes to anilines with i-PrOH as hydrogen source and water as solvent has been developed. The catalytic system can work at a substrate/catalyst (S/C) ratio of 2000, with a turnover frequency (TOF) up to 3360 h^-1 , which represents one of the most active catalytic transfer hydrogenation systems for nitroarene reduction. The catalytic system is operationally simple and the protocol could be scaled up to 20 gram scale. The water-soluble catalyst bearing a carboxyl group could be recycled 15 times without significant loss of activity.

A Mild One-Pot Reduction of Phosphine(V) Oxides Affording Phosphines(III) and Their Metal Catalysts

The metal-free reduction of a range of phosphine(V) oxides employing oxalyl chloride as an activating agent and hexachlorodisilane as reducing reagent has been achieved under mild reaction conditions. The method was successfully applied to the reduction of industrial waste byproduct triphenylphosphine(V) oxide, closing the phosphorus cycle to cleanly regenerate triphenylphosphine(III). Mechanistic studies and quantum chemical calculations support the attack of the dissociated chloride anion of intermediated phosphonium salt at the silicon of the disilane as the rate-limiting step for deprotection. The exquisite purity of the resultant phosphine(III) ligands after the simple removal of volatiles under reduced pressure circumvents laborious purification prior to metalation and has permitted the facile formation of important transition metal catalysts.

Chemoselective hydroborative reduction of nitro motifs using a transition-metal-free catalyst

The first transition-metal-free catalysts for deoxygenative reduction of nitroarenes, nitro heteroarenes and even notoriously challenging nitroalkanes using pinacolborane have been reported.

Phosphazene Base tBu-P4 Catalyzed Methoxy-Alkoxy Exchange Reaction on (Hetero)Arenes

The organic superbase tBu-P4 catalyzes methoxy-alkoxy exchange reactions on (hetero)arenes with alcohols. The catalytic reaction proceeded efficiently with electron-deficient methoxy(hetero)arenes as well as with a variety of alcohols, including 3-amino-1-propanol, β-citronellol, menthol, and cholesterol. An intramolecular version of this reaction furnished six- and seven-membered ring compounds.

Application of Silicon-Initiated Water Splitting for the Reduction of Organic Substrates

The use of water as a donor for hydrogen suitable for the reduction of several important classes of organic compounds is described. It is found that the reductive water splitting can be promoted by several metalloids among which silicon shows the best efficiency. The developed methodologies were applied for the reduction of nitro compounds, N-oxides, sulfoxides, alkenes, alkynes, hydrodehalogenation as well as for the gram-scale synthesis of several substrates of industrial importance.