Functionalization of graphene nanostructures with inorganic nanoparticles and their use for the removal of pharmaceutical pollutants in water

Emerging pollutants such as pharmaceuticals are of special concern because despite their low environmental concentration, their biological activity can be intense, and they should be prevented to reach uncontrolledly to the environment. A graphene-based hybrid material decorated with Fe3O4 and TiO2 nanoparticles (NPs) has been prepared to effectively remove emerging pollutants as nonsteroidal anti-inflammatory drugs (NSAIDs) Ibuprofen and Diclofenac present in water at low environmental concentrations by a one-step functionalization process following a novel gentle and scalable surfactant depletion approach. Following this methodology, nanoparticles are progressively deprived of their original surfactant in the presence of graphene, leading to the formation of hybrid nanostructures composed of two different types of nanoparticles well dispersed over the graphene nanosheets. Ibuprofen and Diclofenac adsorption kinetics on the composites was investigated via UV-Vis spectroscopy. The as prepared hybrid material possesses high adsorption capacity, superparamagnetic properties, photocatalytic behavior, and good water dispersibility. Thanks to incorporating TiO2 nanoparticles as in situ catalysts, the adsorption performance of composites is restored after use, which could be a promising recycling pathway for the adsorbents in wastewater treatments.

Activating the Neutral pH Photozymatic Activity of g-C3N4 Nanosheet through Post-Synthetic Incorporation of Pt

The catalytic activity of photozyme can be regulated through light irradiation time and intensity, but it still suffers from low activity in physiological neutral pH (typically, pH < 5). Herein,...

Surface modified and functionalized graphene oxide membranes for separation of strontium from aqueous solutions

Graphene oxide-strontium (GO-Sr) composites prepared under different ambient conditions were characterized using morphological and spectroscopic techniques to optimize the uptake of Sr from aqueous solutions. These studies indicated that interactions among GO and Sr²⁺ ions are highly sensitive to size and aging of GO sheets, as well as pH of the ambience. Further, the extent of Sr uptake on GO sheets was found to be largely influenced by relative fractions of the associated -COOH, -OH, C-O-C functional groups and sp²-C domains. Membranes prepared using various forms of GO were evaluated for their Sr separation ability and, a window of parameters for optimum separation of Sr has been proposed. Among the variety of membranes studied, those made up of fresh and large GO sheets were found to exhibit superior Sr adsorption capacity (~296 mg/g) at limited GO mass. Further, adsorption efficiency of these GO membranes was observed to deteriorate with aging of GO sheets and rise of GO mass on membrane. The membrane based filtration procedure introduced in present work facilitates to provide a lamellar structure of GO sheets with abundant surface area, diverse and accessible sites for Sr²⁺ ion uptake and offer high Sr adsorption efficiencies.

Hummers' and Brodie's graphene oxides as photocatalysts for phenol degradation

Undoped metal-free graphene oxide (GO) materials prepared by either a modified Hummers' (GO-H) or a Brodie's (GO-B) method were tested as photocatalysts in aqueous solution for the oxidative conversion of phenol. In the dark, the adsorptive capacity of GO-B towards phenol (~35%) was higher than that of GO-H (~15%). Upon near-UV/Vis irradiation, GO-H was able to remove 21% of phenol after 180 min, mostly through adsorption. On the other hand, by using less energetic visible irradiation, GO-B removed as much as 95% in just 90 min. By thorough characterization of the prepared materials (SEM, HRTEM, TGA, TPD, Raman, XRD, XPS and photoluminescence) the observed performances could be explained in terms of their different surface chemistries. The GO-B presents the lower concentration of oxygen functional groups (in particular carbonyl groups as revealed by XPS) and it has a considerably higher photocatalytic activity compared to GO-H. Photoluminescence (PL) of liquid dispersions and XRD analysis of powders showed lower PL intensity and smaller interlayer distance for GO-B relative to GO-H, respectively: this suggests lower electron-hole recombination and enhanced electron transfer in GO-B, in support of its boosted photocatalytic activity. Reusability tests showed no efficiency loss after a second usage cycle and over three runs under visible irradiation, which was in line with the similarity of the XPS spectra of the fresh and used GO-B materials. Moreover, scavenging studies revealed that holes and hydroxyl radicals were the main reactive species in play during the photocatalytic process. The obtained results, establish for the first time, that GO prepared by Brodie's method is an active and stable undoped metal-free photocatalyst for phenol degradation in aqueous solutions, opening new paths for the application of more sustainable and metal-free materials for water treatment solutions.

Light-activated nanozymes: catalytic mechanisms and applications

Recently, nanozymes have attracted enormous interest for their high stability, low cost and various enzyme-like activities. In nature, many biochemical reactions require light. Recently, introducing light to nanozymes has also been reported, especially for photosensitized oxygen activation. Compared to normal nanozymes, light-activated nanozymes possess several advantages including light-regulated activity, using molecular oxygen as a green oxidant, and often higher activity can be achieved. Herein, we summarize light-activated nanozymes, starting from their photophysical processes and identification of reactive oxygen species (ROS). Although the types of light-activated nanozymes are still quite limited and cannot yet mimic the same reactions as natural photo-related enzymes, they have widened the range of nanozymes. A few specific applications are highlighted, including sensing, chemical synthesis, degradation of organic pollutants, and cleavage and repair of DNA. Finally, a few future research opportunities are discussed.

Light-responsive nanozymes for biosensing

Using light as an external stimulus plays a key role not only in modulating activities of nanozymes, but also in constructing efficient biosensing systems.

Lanthanide-Boosted Singlet Oxygen from Diverse Photosensitizers along with Potent Photocatalytic Oxidation

Singlet oxygen (¹O₂) plays a central role in photochemical and photobiological research. Although many photosensitizers for efficient ¹O₂ generation were reported, further improving its yield and oxidation power is still highly desirable. Instead of developing new ones, current photosensitizers might be boosted by mediators to facilitate energy transfer. Taking advantage of the long triplet state lifetime of lanthanide ions (Ln³⁺), we herein demonstrate their roles as potent oxidation mediators. Using oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) at neutral pH as a difficult model reaction, based on the fluorescence, phosphorescence, and metal-binding properties, various dyes and nanomaterials were classified into four types. The ¹O₂ emission of carbon dots and rose bengal was enhanced 4 times in the presence of Ce³⁺. Some nonphosphorescent, but strongly fluorescent dyes that are not known as photosensitizers can still be mediated by Ln³⁺ to produce ¹O₂, but metal-chelating calcein was not enhanced. Finally, nonemissive dyes failed to show activity. As mediators, the excited Ln³⁺ can migrate a long distance and transfer energy to O₂, resulting in high ¹O₂ yield. Since redox-active Ce³⁺ and Eu³⁺ had the highest activity, participation of oxidation involving excited lanthanides might be possible too. In addition, Ln³⁺ also enhanced the activity of graphene quantum dots, graphene oxide, and g-C₃N₄. Rapid degradation of organic dyes was demonstrated, further supporting a high photocatalytic activity of the Ln³⁺-mediated system.

Simultaneously Broadened Visible Light Absorption and Boosted Intersystem Crossing in Platinum-Doped Graphite Carbon Nitride for Enhanced Photosensitization

Herein, taking graphite carbon nitride ( g-C₃N₄) as the example, we demonstrated that the two limiting factors that determine the photosensitization performance, namely, light absorption and intersystem crossing (ISC), could be simultaneously enhanced through Pt²⁺ doping. Specifically, as a π-conjugated two-dimensional semiconductor, g-C₃N₄ is capable of absorbing light shorter than 460 nm (2.7 eV). Upon Pt²⁺ doping that allows metal-to-ligand charge transfer (MLCT) from Pt²⁺ to the substrate g-C₃N₄, the light absorption of g-C₃N₄ was greatly expanded up to 1000 nm. Meanwhile, the large atomic number of Pt²⁺ ensures promotion of ISC to activate the triplet state of g-C₃N₄ via heavy atom effect (HAE), which was confirmed via both photosensitization performance and photophysical characterizations. Further, the enhanced light absorption and photosensitization of Pt²⁺-doped g-C₃N₄ were harvested for antibiotics removal, a type of environment contaminants that gained global attention because of their worldwide abuse. Compared with its undoped counterpart, Pt²⁺-doped g-C₃N₄ featured significantly improved antibiotics removal in the presence of low-power white LED irradiation, which is promising for photosensitized environmental remediation.

Phosphorescent Carbon Dots for Highly Efficient Oxygen Photosensitization and as Photo-oxidative Nanozymes

Materials for photosensitized oxygen activation are extremely important for a suite of photodynamic applications in biomedical, analytical, and energy sectors. Carbon-based photosensitizers are attractive for their low cost and high stability, but most of them such as fullerene and graphene quantum dots suffer from low efficiency, and the rational design of carbon-based photosensitizers remains a challenge. Given the similar chemical origin of phosphorescence and photosensitization, we herein synthesized a series of nitrogen-doped carbon dots (C-dots) and confirmed that their photo-oxidation activity correlated with their phosphorescence quantum yields, providing a direction for the rational designing of such materials. Compared to other carbon nanomaterials and molecular photosensitizers, these C-dots have the highest activity, and they can finish oxidation reactions in a few seconds. The excellent photosensitized oxygen activation makes these water-soluble C-dots a promising oxidase-mimicking nanozyme for photodynamic antimicrobial chemotherapy and other applications.