Non-crosslinked systems modulate the gel behavior and structural properties of chitosan/silica composite aerogels

The aim of this study was to achieve rapid gelation of chitosan (CS) and silica (SA) without crosslinking agent, the relationship between process parameters and the composite aerogels properties were also explored. By varying the composition ratio of the system (from SA:CS = 1:1 to 5:1), the system gelation time was reduced by >12 times, and the drying shrinkage of the composite aerogel reached a minimum of 7.6 %. During the two recombination processes, chitosan rapidly formed aqueous colloid secondary structure under the influence of ethanol. This phenomenon reduced the stability of the system and allowed silica to form a two-phase composite hydrogel. Because the network gap between the fibers was used as a limiting medium for gel growth. In addition, the chitosan/silica composite aerogels exhibited a mesoporous structure with low density (0.1144 g/cm3), and the thermal conductivity was 0.028 W/(m·K) at 30 °C. The trimethylchlorosilane made the composite aerogel have good hydrophobicity with water contact angle as 134.7°, and the adsorption capacity of carbon tetrachloride could reach >10 times of its own weight. This study provides an eco-friendly and high-efficiency method for preparing aerogels, which has potential applications in the fields of thermal insulation, oil-water separation, etc.

Carvacrol-Fabricated Chitosan Nanoparticle Synergistic Potential with Topoisomerase Inhibitors on Breast and Cervical Cancer Cells

Breast and cervical cancers are the most common heterogeneous malignancies in women. Chemotherapy with conventional drug delivery systems having several limitations along with development of multidrug resistance compelled us to seek out targeted therapeutics. Nanoparticles are suitable substitutes to circumvent multidrug resistance for the targeted treatment of cancer. The current study was aimed to investigate the anticancer effect of carvacrol-loaded chitosan nanoparticles with topoisomerase inhibitors. The average size of carvacrol-loaded chitosan nanoparticles was found to be 80 nm with 24.7 mV ζ-potential, and maximum absorbance was observed at 275 nm. Among all drug combinations, the carvacrol nanoparticles with the doxorubicin combination group exerted greater dose-dependent growth inhibition of both MCF-7 and HeLa cells as compared to single carvacrol nanoparticles and doxorubicin. Combination index values of carvacrol nanoparticles and the doxorubicin combination group showed a strong synergistic effect as they were found to be between 0.2 and 0.4, 0.31 for MCF-7 and 0.34 for HeLa cells. The carvacrol nanoparticles in combination with doxorubicin on MCF-7 cells reduced the dose 16.32-fold for carvacrol nanoparticles and 4.09-fold for doxorubicin at 6.23 μg/mL IC50, while on HeLa cells, this combination reduced the dose 13.18-fold for carvacrol nanoparticles and 3.83-fold for doxorubicin at 9.33 μg/mL IC50. As the dose reduction values were greater than 1, they indicated favorable dose reduction. It was concluded that the combination of carvacrol-loaded chitosan nanoparticles with topoisomerase inhibitors may represent an innovative and promising strategy to improve the efficacy, resistance, and targeted delivery of chemotherapeutics in cancer.

DEAE/Catechol-Chitosan Conjugates as Bioactive Polymers: Synthesis, Characterization, and Potential Applications

This work provides the first description of the synthesis and characterization of water-soluble chitosan (Cs) derivatives based on the conjugation of both diethylaminoethyl (DEAE) and catechol groups onto the Cs backbone (Cs-DC) in order to obtain a Cs derivative with antioxidant and antimicrobial properties. The degree of substitution [DS (%)] was 35.46% for DEAE and 2.53% for catechol, determined by spectroscopy. Changes in the molecular packing due to the incorporation of both pendant groups were described by X-ray diffraction and thermogravimetric analysis. For Cs, the crystallinity index was 59.46% and the maximum decomposition rate appeared at 309.3 °C, while for Cs-DC, the values corresponded to 16.98% and 236.4 °C, respectively. The incorporation of DEAE and catechol groups also increases the solubility of the polymer at pH > 7 without harming the antimicrobial activity displayed by the unmodified polymer. The catecholic derivatives increase the radical scavenging activity in terms of the half-maximum effective concentration (EC₅₀). An EC₅₀ of 1.20 μg/mL was found for neat hydrocaffeic acid (HCA) solution, while for chitosan-catechol (Cs-Ca) and Cs-DC solutions, concentrations equivalent to free HCA of 0.33 and 0.41 μg/mL were required, respectively. Cell culture results show that all Cs derivatives have low cytotoxicity, and Cs-DC showed the ability to reduce the activity of reactive oxygen species by 40% at concentrations as low as 4 μg/mL. Polymeric nanoparticles of Cs derivatives with a hydrodynamic diameter (D_h) of around 200 nm, unimodal size distributions, and a negative ζ-potential were obtained by ionotropic gelation and coated with hyaluronic acid in aqueous suspension, providing the multifunctional nanoparticles with higher stability and a narrower size distribution.

Cytotoxicity Enhancement in MCF-7 Breast Cancer Cells with Depolymerized Chitosan Delivery of α-Mangostin

The application of α-mangostin (AMG) in breast cancer research has wide intentions. Chitosan-based nanoparticles (CSNPs) have attractive prospects for developing anticancer drugs, especially in their high flexibility for modification to enhance their anticancer action. This research aimed to study the impact of depolymerized chitosan (CS) on the cytotoxicity enhancement of AMG in MCF-7 breast cancer cells. CSNPs effectivity depends on size, shape, crystallinity degree, and charge surface. Modifying CS molecular weight (MW) is expected to influence CSNPs’ characteristics, impacting size, shape, crystallinity degree, and charge surface. CSNPs are developed using the method of ionic gelation with sodium tripolyphosphate (TPP) as a crosslinker and spray pyrolysis procedure. Nanoparticles’ (NPs) sizes vary from 205.3 ± 81 nm to 450.9 ± 235 nm, ZP charges range from +10.56 mV to +51.56 mV, and entrapment efficiency from 85.35% to 90.45%. The morphology of NPs are all the same spherical forms. In vitro release studies confirmed that AMG–Chitosan–High Molecular Weight (AMG–CS–HMW) and AMG–Chitosan–Low Molecular Weight (AMG–CS–LMW) had a sustained-release system profile. MW has a great influence on surface, drug release, and cytotoxicity enhancement of AMG in CSNPs to MCF-7 cancer cells. The preparations AMG–CS–HMW and AMG–CS–LMW NPs considerably enhanced the cytotoxicity of MCF-7 cells with IC₅₀ values of 5.90 ± 0.08 µg/mL and 4.90 ± 0.16 µg/mL, respectively, as compared with the non-nano particle formulation with an IC₅₀ of 8.47 ± 0.29 µg/mL. These findings suggest that CSNPs can enhance the physicochemical characteristics and cytotoxicity of AMG in breast cancer treatment.

Contributions of supercritical fluid technology for advancing decellularization and postprocessing of viable biological materials

The demand for tissue and organ transplantation worldwide has led to an increased interest in the development of new therapies to restore normal tissue function through transplantation of injured tissue with biomedically engineered matrices. Among these developments is decellularization, a process that focuses on the removal of immunogenic cellular material from a tissue or organ. However, decellularization is a complex and often harsh process that frequently employs techniques that can negatively impact the properties of the materials subjected to it. The need for a more benign alternative has driven research on supercritical carbon dioxide (scCO₂) assisted decellularization. scCO₂ can achieve its critical point at relatively low temperature and pressure conditions, and for its high transfer rate and permeability. These properties make scCO₂ an appealing methodology that can replace or diminish the exposure of harsh chemicals to sensitive materials, which in turn could lead to better preservation of their biochemical and mechanical properties. The presented review covers relevant literature over the last years where scCO₂-assisted decellularization is employed, as well as discussing major topics such as the mechanism of action behind scCO₂-assisted decellularization, CO₂ and cosolvents' solvent properties, effect of the operational parameters on decellularization efficacy and on the material's properties.

DEAE-chitosan nanoparticles as a pneumococcus-biomimetic material for the development of antipneumococcal therapeutics

Advanced biomaterials provide an interesting and versatile platform to implement new and more effective strategies to fight bacterial infections. Chitosan is one of these biopolymers and possesses relevant features for biomedical applications. Here we synthesized nanoparticles of chitosan derivatized with diethylaminoethyl groups (ChiDENPs) to emulate the choline residues in the pneumococcal cell wall and act as ligands for choline-binding proteins (CBPs). Firstly, we assessed the ability of diethylaminoethyl (DEAE) to sequester the CBPs present in the bacterial surface, thus promoting chain formation. Secondly, the CBP-binding ability of ChiDENPs was purposed to encapsulate a bio-active molecule, the antimicrobial enzyme Cpl-711 (ChiDENPs-711), with improved stability over non-derivatized chitosan. The enzyme-loaded system released more than 90% of the active enzybiotic in ≈ 2 h, above the usual in vivo half-life of this kind of enzymes. Therefore, ChiDENPs provide a promising platform for the controlled release of CBP-enzybiotics in biological contexts.

Polysaccharide nanoparticles for oral controlled drug delivery: the role of drug-polymer and interpolymer interactions

Introduction: The oral route still represents the most popular way of administering drugs; nowadays oral administration faces new challenges, in particular with regards to the delivery of APIs that are poorly absorbed and sensitive to degradation such as macromolecules and biotechnological drugs. Nanoparticles are promising tools for the efficient delivery of these drugs to the gastrointestinal tract. Areas covered:Approaches and techniques for the formulation of drugs, with particular focus on the preparation of polysaccharide nanoparticles obtained by non-covalent interactions. Expert opinion:Polysaccharide-based nanoparticulate systems offer the opportunity to address some of the issues posed by biotechnological drugs, as well as by small molecules, with problems of stability/intestinal absorption, by exploiting the capability of the polymer to establish non-covalent bonds with functional groups in the chemical structure of the API. This area of research will continue to grow, provided that these drug delivery technologies will efficaciously be translated into systems that can be manufactured on a large scale under GMP conditions. Industrial scale-up represents the biggest obstacle to overcome in view of the transformation of very promising results obtained on lab scale into medicinal products. To do that, an effort toward the simplification of the process and technologies is necessary.

Formulation, characterization and in vitro release study of 5-fluorouracil loaded chitosan nanoparticles

The main objective of this study was to evaluate the most suitable conditions to prepare 5-fluorouracil (5-FU) loaded chitosan nanoparticles (CSNPs). 5-FU loaded CSNPs were prepared employing the ionic gelation technique using three different molecular weights of CS with the polyanion sodium tripolyphosphate (STPP) as cross-linking agent. The preparation was based on the ionic interaction of positively charged CS and negatively charged STPP. The entrapment efficiency (EE%) of CSNPs was in the range of 3.86-21.82% EE% exhibited a clear increase with increasing CS concentration. The averge particles size was in the nanosize range and monodisperse in nature whereas transmission electron microscope micrographs showed that the prepared nanoparticles have a spherical shape. Fourier transform infrared (FTIR), X- ray differaction (XRD) and differential scanning calorimetry (DSC) confirmed successful incorporation of 5-FU in prepared CSNPs. In vitro release of 5-FU from selected formulations exhibited sustained release from the nanoparticles where slower release was observed when higher molecular weight CS was used. The study of drug release kinetics revealed that the release of 5-FU from CSNPs followed a diffusion controlled pattern.

The preparation of a core–shell stationary phase by the in situ polymerization of a hydrophilic polymer on the surface of silica and its chromatographic performance

A method for the in situ polymerization of polymers on a silica surface was developed.

Review on the Production of Polysaccharide Aerogel Particles

A detailed study of the production of polysaccharide aerogel (bio-aerogel) particles from lab to pilot scale is surveyed in this article. An introduction to various droplets techniques available in the market is given and compared with the lab scale production of droplets using pipettes and syringes. An overview of the mechanisms of gelation of polysaccharide solutions together with non-solvent induced phase separation option is then discussed in the view of making wet particles. The main steps of particle recovery and solvent exchange are briefly described in order to pass through the final drying process. Various drying processes are overviewed and the importance of supercritical drying is highlighted. In addition, we present the characterization techniques to analyse the morphology and properties of the aerogels. The case studies of bio-aerogel (agar, alginate, cellulose, chitin, κ-carrageenan, pectin and starch) particles are reviewed. Potential applications of polysaccharide aerogel particles are briefly given. Finally, the conclusions summarize the prospects of the potential scale-up methods for producing bio-aerogel particles.