Selective Electrochemical Degradation of Lignosulfonate to Bio-Based Aldehydes

A sustainable electrochemical pathway for degradation and thermal treatment of technical lignosulfonate is presented. This approach is an opportunity to produce remarkable quantities of low molecular weight compounds, such as vanillin and acetovanillone. For the electrochemical degradation, a simple two-electrode arrangement in aqueous media is used, which is also easily scalable. The oxidation of the biopolymer occurs at the anode whereas hydrogen is evolved at the cathode. The subsequent thermal treatment supports the degradation of the robust chemical structure of lignosulfonates. With optimized electrolytic conditions, vanillin could be obtained in 9.7 wt% relative to the dry mass of lignosulfonate used. Aside from vanillin, by-products such as acetovanillone or vanillic acid were observed in lower yields. A new and reliable one-pot, two-step degradation of different technically relevant lignosulfonates is established with the advantages of using electrons as an oxidizing agent, which results in low quantities of reagent waste.

Green Oxidation of Ketones to Lactones with Oxone in Water

Cyclic ketones were quickly and quantitatively converted to 5-, 6-, and 7-membered lactones, very important synthons, by treatment with Oxone, a cheap, stable, and nonpollutant oxidizing reagent, in 1 M NaH₂PO₄/Na₂HPO₄ water solution (pH 7). Under such simple and green conditions, no hydroxyacid was formed, thus making the adoption of more complex and non-eco-friendly procedures previously developed to avoid lactone hydrolysis unnecessary. With some changes, the method was successfully applied also to water-insoluble ketones such as adamantanone, acetophenone, 2-indanone, and the challenging cycloheptanone.

Oxidative valorisation of lignin into valuable phenolics: Effect of acidic and basic catalysts and reaction parameters

The aromatic nature of lignin makes it a good source for the production of numerous platform chemicals. The valorization of lignin into valuable compounds depends upon the type of bonds and functionality present in lignin. Here, we have studied the depolymerization of rice straw alkali lignin in N₂ and O₂ with acidic (ZSM-5), basic (MgO) catalyst and with their mixtures (1:1, 3:7 and 7:3). The effect of hydrogen peroxide on lignin depolymerization was also examined. Maximum yield of bio-oil (50 wt%) was obtained with pure ZSM-5 and 1 ml hydrogen peroxide in nitrogen atmosphere, while maximum conversion (60%) was observed in oxygen environment during the non-catalytic depolymerization of lignin. Bio-oil characterization through GC-MS showed maximum selectivity towards 2-methoxy-4-vinylphenol with 38.5 area% in the bio-oil of ZSM-5-N₂. The bio-oils have also been characterized using ¹H NMR, FT-IR and GC-MS.

Ynamide-Mediated Intermolecular Esterification

An ynamide-mediated one-pot, two-step intermolecular esterification via the condensation of carboxylic acids with nucleophilic hydroxyl species was reported. A broad substrate scope with respect to carboxylic acids, alcohols, and phenols was observed. The α-acyloxyenamide intermediates formed by the addition of carboxylic acids to ynamides proved to be effective acylating reagents for the esterification of alcohol and phenol derivatives with the assistance of base catalysis. Notably, the racemization of the α-chiral center of carboxylic acids can be avoided.

Catalytic Scissoring of Lignin into Aryl Monomers

Lignin is an aromatic polymer, which is the biggest and most sustainable reservoir for aromatics. The selective conversion of lignin polymers into aryl monomers is a promising route to provide aromatics, but it is also a challenging task. Compared to cellulose, lignin remains the most poorly utilized biopolymer due to its complex structure. Although harsh conditions can degrade lignin, the aromatic rings are usually destroyed. This article comprehensively analyzes the challenges facing the scissoring of lignin into aryl monomers and summarizes the recent progress, focusing on the strategies and the catalysts to address the problems. Finally, emphasis is given to the outlook and future directions of this research.

Nature of Synergy between Brønsted and Lewis Acid Sites in Sn-Beta Zeolites for Polyoxymethylene Dimethyl Ethers Synthesis

The role of Lewis and Brønsted acid sites and their potential synergy remains ambiguous for the production of polyoxymethylene dimethyl ethers (OME), which are suitable as a Diesel substitute. Here, this synergistic effect was investigated by using a series of beta polymorph A (BEA) zeolites with various degrees of Brønsted and Lewis acidity. Lewis acidity was introduced in dealuminated zeolites by Sn grafting in dichloromethane. These sites were only active in paraformaldehyde decomposition, OME growth, and acetalization. The Brønsted acid sites arising from bridging hydroxyl groups were active for all reaction steps, and notably for trioxane ring-opening and dissociation to formaldehyde (FA), which did not occur on the Lewis acid sites. Presence of both Lewis and Brønsted acid sites led to a four-fold increase in turnover frequency and a significant decrease of byproduct formation compared with the parent zeolite during OME synthesis from dimethoxymethane and trioxane. The synergistic effect between both types of acid sites is explained by FA insertion on Lewis acid sites leading to OME growth. Interaction between tetrahedral Sn and the carbonyl group of FA resulted in an activated carbonyl bond, which was likely the initial step for insertion of FA into OME.

Oxidation of Benzylic Alcohols and Lignin Model Compounds with Layered Double Hydroxide Catalysts

Alcohol oxidation to carbonyl compounds is one of the most commonly used reactions in synthetic chemistry. Herein, we report the use of base metal layered double hydroxide (LDH) catalysts for the oxidation of benzylic alcohols in polar solvents. These catalysts are ideal reagents for alcohol oxidations due to their ease of synthesis, tunability, and ease of separation from the reaction medium. LDHs synthesized in this study were fully characterized by means of X-ray diffraction, NH3-temperature programmed desorption (TPD), pulsed CO2 chemisorption, N2 physisorption, electron microscopy, and elemental analysis. LDHs were found to effectively oxidize benzylic alcohols to their corresponding carbonyl compounds in diphenyl ether, using O2 as the terminal oxidant. LDH catalysts were also applied to the oxidation of lignin β-O-4 model compounds. Typically, for all catalysts, only trace amounts of the ketone formed from benzylic alcohol oxidation were observed, the main products comprising benzoic acids and phenols arising from β-aryl ether cleavage. This observation is consistent with the higher reactivity of the ketones, resulting from weakening of the Cβ–O4 bond that was shown to be aerobically cleaved at 180 °C in the absence of a catalyst.

Alternatives for Chemical and Biochemical Lignin Valorization: Hot Topics from a Bibliometric Analysis of the Research Published During the 2000–2016 Period

A complete bibliometric analysis of the Scopus database was performed to identify the research trends related to lignin valorization from 2000 to 2016. The results from this analysis revealed an exponentially increasing number of publications and a high relevance of interdisciplinary collaboration. The simultaneous valorization of the three main components of lignocellulosic biomass (cellulose, hemicellulose, and lignin) has been revealed as a key aspect and optimal pretreatment is required for the subsequent lignin valorization. Research covers the determination of the lignin structure, isolation, and characterization; depolymerization by thermal and thermochemical methods; chemical, biochemical and biological conversion of depolymerized lignin; and lignin applications. Most methods for lignin depolymerization are focused on the selective cleavage of the β-O-4 linkage. Although many depolymerization methods have been developed, depolymerization with sodium hydroxide is the dominant process at industrial scale. Oxidative conversion of lignin is the most used method for the chemical lignin upgrading. Lignin uses can be classified according to its structure into lignin-derived aromatic compounds, lignin-derived carbon materials and lignin-derived polymeric materials. There are many advances in all approaches, but lignin-derived polymeric materials appear as a promising option.

Perspective on Lignin Oxidation: Advances, Challenges, and Future Directions

Lignin valorization has gained increasing attention over the past decade. Being the world's largest source of renewable aromatics, its valorization could pave the way towards more profitable and more sustainable lignocellulose biorefineries. Many lignin valorization strategies focus on the disassembly of lignin into aromatic monomers, which can serve as platform molecules for the chemical industry. Within this framework, the oxidative conversion of lignin is of great interest because it enables the formation of highly functionalized, valuable compounds. This work provides a brief overview and critical discussion of lignin oxidation research. In the first part, oxidative conversion of lignin models and isolated lignin streams is reviewed. The second part highlights a number of challenges with respect to the substrate, catalyst, and operating conditions, and proposes some future directions regarding the oxidative conversion of lignin.