Tailoring Mott-Schottky RuO2/MgFe-LDH Heterojunctions in Electrospun Microfibers: A Bifunctional Electrocatalyst for Water Electrolysis

Hydrogen is a fuel of the future that has the potential to replace conventional fossil fuels in several applications. The quickest and most effective method of producing pure hydrogen with no carbon emissions is water electrolysis. Developing highly active electrocatalysts is crucial due to the slow kinetics of oxygen and hydrogen evolution, which limit the usage of precious metals in water splitting. Interfacial engineering of heterostructures has sparked widespread interest in improving charge transfer efficiency and optimizing adsorption/desorption energetics. The emergence of a built-in-electric field between RuO2 and MgFe-LDH improves the catalytic efficiency toward water splitting reaction. However, LDH-based materials suffer from poor conductivity, necessitating the design of 1D materials by integration of RuO2/ MgFe-LDH to enhance catalytic properties through large surface areas and high electronic conductivity. Experimental results demonstrate lower overpotentials (273 and 122 mV at 10 mA cm-2) and remarkable stability (60 h) for the RuO2/MgFe-LDH/Fiber heterostructure in OER (1 m KOH) and HER (0.5 m H2SO4) reactions. Density functional theory (DFT) unveils a synergistic mechanism at the RuO2/MgFe-LDH interface, leading to enhanced catalytic activity in OER and improved adsorption energy for hydrogen atoms, thereby facilitating HER catalysis.

Upcycling of PVC waste to high-value sorbent with KOH-activation for efficient removal of organic dyes

Polyvinyl chloride (PVC), known for its chemical stability and flame-retardant qualities, has many uses in various fields, such as pipes, electric wires, and cable insulation. Research has established its potential recovery as a fluidic fuel through pyrolysis, but the use of PVC pyrolysis oil, which is tainted by chlorine, is constrained by its low heat value and harmful environmental effects. This study engineered a layered double hydroxide (LDH) to tackle these challenges. The LDH facilitated dechlorination during PVC pyrolysis and bolstered thermal stability via cross-linking. During pyrolysis with LDH, PVC was transformed into carbon-rich precursors to sorbents. Chemical activation of these residues using KOH created sorbents with a specific surface area of 1495.4 m2 g⁻1, rendering them hydrophilic. These resulting sorbents displayed impressive adsorption capabilities, removing up to 486.79 mg g⁻1 of methylene blue and exhibiting the simultaneous removal of cations and anions.

Fabrication of a novel magnetic nanostructure based on cellulose-gellan gum hydrogel, embedded with MgAl LDH as an efficient catalyst for the synthesis of polyhydroquinoline derivatives

Nanocatalysts play a vital role in chemical reactions, energy conservation, and pollution control. They significantly contribute to organic synthesis by using natural polymers as nanoparticle substrates in nanocatalysts. Natural hydrogels made from polysaccharide and/or protein sources may be used to accomplish this. Recent research has focused on using layered double-hydroxides (LDHs) in composites having catalytic properties. Magnetic features of the catalyst allow its extraction from the environment using a magnet after the reaction, improving product efficiency. This work developed a catalyst for producing physiologically relevant polyhydroquinoline derivatives using a novel magnetic nanocomposite containing natural cellulose-gellan gum hydrogel and MgAl LDH. The Cell-GG hydrogel/MgAl LDH/Fe3O4 nanocomposite showed over 90 % efficiency in one-pot production of polyhydroquinoline derivatives by asymmetric Hantzsch condensation. Dimedone, ammonium acetate, ethyl acetoacetate, and different substituted aldehydes were employed in successive processes to create polyhydroquinoline derivatives. High product efficiency, quick reaction time, room temperature functioning, and easy separation with a magnet suggest a potent catalyst. Interestingly, the catalyst retains 80 % of its original capability after four cycles. Additionally, the Cell-GG hydrogel/MgAl LDH/Fe3O4 nanocomposite was analyzed using several methods, including FT-IR, FE-SEM, EDX, XRD, VSM and TGA, to obtain insight into its chemical and physical characteristics.

Ensemble meta machine learning for predicting the adsorption of anionic and cationic dyes from aqueous solutions using Polymer/graphene/clay/MgFeAl-LTH nanocomposite

Adsorption is one of the most promising wastewater treatment methods due to its simplicity and efficacy at ambient temperature and pressure. However, the technical and economic feasibility of this process largely depends on the performance of the utilized adsorbents. In this study, a promising adsorbent made of polyethyleneimine, graphene oxide (GO), bentonite, and MgFeAl-layered triple hydroxide (MgFeAl-LTH) has been synthesized and characterized. The results revealed that the synthesized nanocomposite (abbreviated as PGB-LTH) possesses good porosity and crystallinity. The adsorption performance of the PGB-LTH nanocomposite towards two harmful water pollutants (i.e., methyl orange (MO) and crystal violet (CV)) was investigated, and the results revealed that the nanocomposite outperforms its parental materials (i.e., GO, bentonite, and MgFeAl-LTH). The maximum adsorption capacity (qmax) of MO and CV onto the nanocomposite could reach 1666.7 and 1250.0 mg/g, respectively, as predicted using the Langmuir adsorption isotherm. Additionally, the PGB-LTH nanocomposite is highly reusable with an insignificant decline in performance upon repetitive use. In terms of thermodynamics, MO adsorption onto the nanocomposite is exothermic while CV adsorption is endothermic despite that both dyes adsorb spontaneously as revealed by the negative values of the Gibbs free energy change at all the examined temperatures. The generated adsorption data were utilized for constructing and assessing ensemble meta-machine learning techniques aimed at cost-effective simulation and prediction of the proposed adsorption method. Bagging and boosting methods were developed and evaluated intensively using the obtained adsorption data. The Extra Trees model achieved promising results as evidenced by the high correlation coefficient of 99% as well as low computed RMSE and MAE errors of 11.42 and 5.11, respectively, during the testing phase. These results demonstrate the model strong capability to effectively simulate and predict the adsorption process in question.

Engineering g-C3N4 with CuAl-layered double hydroxide in 2D/2D heterostructures for visible-light water splitting

CuAl layered double hydroxide (LDH) and polymeric carbon nitride (g-C3N4, GCNN) were assembled to construct a set of novel 2D/2D CuAl-LDH/GCNN heterostructures. These materials were tested towards H2 and O2 generation from water splitting using visible-light irradiation. Compared to pristine materials, the heterostructures displayed strongly enhanced visible-light H2 evolution, dependent on the LDH content, which acts as a cocatalyst, replacing the benchmark Pt. The optimal LDH loading was achieved for 0.2CuAl-LDH/GCNN that exhibited an increased number of active sites and showed a trade-off between charge separation efficiency and light shading, resulting in a 32-fold increase in the amount of evolved H2 compared with GCNN. In addition, the 0.2CuAl-LDH/GCNN heterostructure generated 1.5 times more O2 than GCNN. The higher photocatalytic performance was due to efficient charge carriers' separation at the heterojunction interface via an S-scheme (corroborated by work function, steady-state and time-resolved photoluminescence studies), enhanced utilisation of longer-wavelength photons (>460 nm) and higher surface area available for the catalytic reactions.

Eggshell-Derived Copper Calcium Hydroxy Double Salts and Their Activity for Treatment of Highly Polluted Wastewater

By using methyl orange (MO) removal as a model reaction, the best temperatures for processing eggshells are 750 °C and above to obtain biobased CaO materials, a raw material for producing CuCa hydroxy double salt (HDS) materials with high efficiency in treatments of highly polluted wastewater (the initial concentration of MO is 500 ppm). Characterization techniques employed in this study include power X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, nitrogen adsorption-desorption analysis, and the colorimetric method, as well as energy-dispersive X-ray, infrared-, and electron spin resonance spectroscopies. Complete MO removal and high chemical oxygen demand (COD) efficiencies (>90%) can be achieved after 3 min treatments of the aqueous MO with the calcined eggshell-derived CuCa HDS materials. The spent, deactivated HDS materials can be regenerated by an acid wash method. The activity of CuCa HDS materials in MO removal is unaffected by eggshell sources, implying that sorting steps may be unnecessary when eggshell food waste (duck, quail, and hen eggshells) is collected to produce biobased CaO. The findings of this study demonstrated that eggshells can be used in place of limestone and could be a more sustainable, renewable, and cost-effective source for material development and other applications.

Visible light photoreforming of greenhouse gases by nano Cu-Al LDH intercalated with urea-derived anions

The accumulation of anthropogenic greenhouse gases (GHGs) in the atmosphere causes global warming. Global efforts are carried out to prevent temperature overshooting and limit the increase in the Earth's surface temperature to 1.5 °C. Carbon dioxide and methane are the largest contributors to global warming. We have synthesized copper-aluminium layered double hydroxide (Cu-Al LDH) catalysts by urea hydrolysis under microwave (MW) irradiation. The effect of MW power, urea concentration, and MII/MIII ratios was studied. The physicochemical properties of the prepared LDH catalysts were characterized by several analysis techniques. The results confirmed the formation of the layered structure with the intercalation of urea-derived anions. The urea-derived anions enhanced the optical and photocatalytic properties of the nano Cu-Al LDH in the visible-light region. The photocatalytic activity of the prepared Cu-Al LDH catalysts was tested for greenhouse gas conversion (CH4, CO2, and H2O) under visible light. The dynamic gas mixture flow can pass through the reactor at room temperature under atmospheric pressure. The results show a high conversion percentage for both CO2 and CH4. The highest converted amounts were 7.48 and 1.02 mmol mL-1 g-1 for CH4 and CO2, respectively, under the reaction conditions. The main product was formaldehyde with high selectivity (>99%). The results also show the stability of the catalysts over several cycles. The current work represents a green chemistry approach for efficient photocatalyst synthesis, visible light utilization, and GHGs' conversion into a valuable product.

Chitosan-gelatin hydrogel incorporating polyvinyl alcohol and MnFe double-layered hydroxide nanocomposites with biological activity

In this research, a novel nanocomposite scaffold was developed based on a natural chitosan-gelatin (CS-Ge) hydrogel by incorporating synthetic polyvinyl alcohol (PVA) and MnFe layered double hydroxides (LDHs). The CS-Ge/PVP/MnFe LDH nanocomposite hydrogels was characterized using Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Field Emission Scanning Electron Microscope (FE-SEM), Energy Dispersive X-Ray (EDX), vibrating-sample magnetometer (VSM), and Thermal gravimetric analysis (TGA). The biological tests conducted showed cell viability of the healthy cell line exceeding 95 % after 48 and 72 h. Additionally, the nanocomposite demonstrated high antibacterial activity against P. aeruginosa bacteria biofilm, as confirmed through Anti-biofilm assays. Furthermore, mechanical tests revealed that the storage modulus was greater than the loss modulus (G'/G" > 1), confirming the appropriate elastic state of the nanocomposite.

NiFe-Layered Double Hydroxides/Lead-free Cs2AgBiBr6 Perovskite 2D/2D Heterojunction for Photocatalytic CO2 Conversion

Designing of heterojunction photocatalysts with appropriate interfacial contact plays crucial roles in enhancing the interfacial charge transfer/separation. A two-dimensional (2D)/2D face-to-face heterojunction is an ideal option since this architecture with a large contact area can provide abundant reactive centers and promote the interfacial charge transfer/separation between layers. Herein, a novel 2D/2D heterojunction of NiFe-layered double hydroxides (NiFe-LDH)/Cs₂AgBiBr₆ (CABB) was fabricated by electrostatic self-assembly of NiFe-LDH and CABB nanosheets. This unique 2D/2D architecture endowed NiFe-LDH/CABB with a large contact area and a short charge transport distance, assuring remarkable interfacial charge transfer/separation rates. As a result, the 2D/2D NiFe-LDH/CABB heterojunction exhibited significant improvement in photocatalytic CO₂ reduction under visible light than the pristine counterparts. Based on density functional theory calculations and various characterizations, a step scheme charge-transfer mechanism was proposed. This investigation sheds light on the designing and manufacturing of highly efficient 2D/2D heterostructure photocatalysts for artificial photosynthesis.

Controllable synthesis of a nanoparticle-modified thin-layer 3D flower-like CuZnAl-LDHs material with high NO2 gas sensing performance at room temperature

Three-dimensional flower-like CuZnAl-LDHs attached to nanoparticles were prepared by a one-step hydrothermal method with a detection limit of 30 ppb for NO2.

Synthesis, Characterization, and Application of Co-Al-Zn Layered Double Hydroxide/Hydrochar Composite for Simultaneous Removal of Cationic and Anionic Dyes

Decontamination of organic dyes from wastewater requires efficient and compatible materials that must be able to remove dyes with different charges at the same time. In this study, composites of layered double hydroxide (LDH) and hydrochar (HC) were prepared and tested for use as general-purpose sorbents for the simultaneous removal of cationic and anionic dyes (i.e., methylene blue (MB), methyl orange (MO), and reactive yellow (RY)). Characterization studies reveal that the surface functional groups on composites are –OH, NO3, M–O bonds. It was observed that crystallinity of LDH decreased with an increasing amount of HC. Preliminary experiments showed that the dyes (i.e., MB, MO, and RY) were well removed simultaneously onto the composite with HC (2.0 g HC/prepared composite). This composite was selected for more experiments, and the adsorption efficiency was optimized by the multivariate technique using the response surface methodology (RSM). Removal efficiency of 100% was obtained for all three dyes with an adsorption capacity of 243, 5.3, and 16.3 µmol g−1 for MB, MO, and RY, respectively. Elovich’s initial intake rates (α) were 4,272, 441, and 99.5 mg g−1 min−1 for RY, MB, and MO, respectively. Data fitted in various models suggested second-order multiplex kinetics, where the surface heterogeneity response was sorbate dependent.

Facile Synthesis of Electrically Conductive and Heatable Nanoparticle/Nanocarbon Hybrid Aerogels

Joule heating studies on nanoparticle/nanocarbon hybrid aerogels have been reported, but systematic investigations on hydrotalcite-derived catalysts supported onto reduced graphene oxide (rGO) aerogels are rare. In this study, hydrotalcite-derived Cu-Al₂O₃ nanoparticles were incorporated into a porous and multifunctional rGO aerogel support for fabricating electrically conducting Cu-Al₂O₃/rGO hybrid aerogels, and their properties were investigated in detail. The hybridization of Cu-Al₂O₃ with a 3D nanocarbon support network imparts additional functionalities to the widely used functional inorganic nanoparticles, such as direct electrical framework heating and easy regeneration and separation of spent nanoparticles, with well-spaced nanoparticle segregation. 3D variable-range hopping model fitting confirmed that electrons were able to reach the entire aerogel to enable uniform resistive heating. The conductivity of the nanocarbon support framework facilitates uniform and fast heating (up to 636 K/min) of the embedded nanoparticles at very low energy consumption, while the large porosity and high thermal conductivity enable efficient heat dissipation during natural cooling (up to 336 K/min). The thermal stability of the hybrid aerogel was demonstrated by repeated heating/cooling cycling at different temperatures that were relevant to important industrial applications. The facile synthetic approach can be easily adapted to fabricate other types of multifunctional nanoparticle/nanocarbon hybrid aerogels, such as the MgAl-MMO/rGO aerogel and the Ni-Al₂O₃/rGO aerogel. These findings open up new routes to the functionalization of inorganic nanoparticles and extend their application ranges that involve electrical/thermal heating, temperature-dependent catalysis, sorption, and sensing.

Study on the efficient removal of azo dyes by heterogeneous photo-Fenton process with 3D flower-like layered double hydroxide

As organic dyes are the main pollutants in water pollution, seeking effective removal solutions is urgent for humans and the environment. A novel environmentally friendly three-dimensional CoFe-LDHs (3D CoFe-LDHs) catalyst was synthesized by one-step hydrothermal method. Scanning electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectra, X-ray diffraction, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller technique as well as UV-Vis diffuse reflectance spectra were used to characterize the prepared samples. The experimental results revealed that 3D CoFe-LDHs exhibited a rapid decolorization of methyl orange and Rhodamine B by heterogeneous photo-Fenton process after reaching the adsorption equilibrium, and the final decolorization efficiency reached 91.18% and 93.56%, respectively. On the contrary, the decolorizing effect of 3D CoFe-LDHs on neutral blue was relatively weak. The initial concentrations of azo dyes, pH and H₂O₂ concentration affected the decolorization of dyes and the catalyst maintained excellent reusability and stability after reuse over five cycles. The quenching experiments found that •OH, •O₂ ^- and h⁺ were the main active substances and reaction mechanisms were further proposed. The study suggests that the synergistic effect of photocatalysis and Fenton oxidation process significantly improved the removal of azo dyes and the synthesized catalyst had potentially promising applications for difficult-to-biodegrade organic pollutants in wastewater.

Diatomite/Cu/Al layered double hydroxide hybrid composites for polyethylene degradation

A diatomite/Cu/Al layered double hydroxide hybrid composite (DI-LDH) was synthesized using the hydrothermal method. The synthesized DI-LDH composites were characterized via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and the Brunauer–Emmett–Teller (BET) method. Polyethylene degradation over DI-LDH was studied in a batch reactor. DI-LDH showed layered structures, indicating that the diatomite/Cu/Al double hydroxide hybrid was successfully synthesized. A significant decrease in the degradation temperature and the released amounts of CO and CO₂ was observed in the DI-LDH catalytic degradation reaction, which indicated that DI-LDH was helpful for the polyethylene degradation reaction. The X-ray photoelectron spectroscopy (XPS) results suggested that the reaction of Cu²⁺ → Cu⁺ occurred in polyethylene catalytic pyrolysis, which resulted in the decrease in the released CO amount. DI-LDH may be a potential environmental catalyst that can be applied to treat LDPE waste.

DI-LDH that can reduce the pyrolysis temperature of LDPE and the release of carbon monoxide (CO) and carbon dioxide (CO₂).

In situ fabrication of hierarchical biomass carbon-supported Cu@CuO-Al2O3 composite materials: synthesis, properties and adsorption applications

Hierarchical Cu-Al2O3/biomass-activated carbon composites were successfully prepared by entrapping a biomass-activated carbon powder derived from green algae in the Cu-Al2O3 frame (H-Cu-Al/BC) for the removal of ammonium nitrogen (NH4 +-N) from aqueous solutions. The as-synthesized samples were characterized via XRD, SEM, BET and FTIR spectroscopy. The BET specific surface area of the synthesized H-Cu-Al/BC increased from 175.4 m2 g-1 to 302.3 m2 g-1 upon the incorporation of the Cu-Al oxide nanoparticles in the BC surface channels. The experimental data indicated that the adsorption isotherms were well described by the Langmuir equilibrium isotherm equation and the adsorption kinetics of NH4 +-N obeyed the pseudo-second-order kinetic model. The static maximum adsorption capacity of NH4 +-N on H-Cu-Al/BC was 81.54 mg g-1, which was significantly higher than those of raw BC and H-Al/BC. In addition, the presence of K+, Na+, Ca2+, and Mg2+ ions had no significant impact on the NH4 +-N adsorption, but the presence of Al3+ and humic acid (NOM) obviously affected and inhibited the NH4 +-N adsorption. The thermodynamic analyses indicated that the adsorption process was endothermic and spontaneous in nature. H-Cu-Al/BC exhibited removal efficiency of more than 80% even after five consecutive cycles according to the recycle studies. These findings suggest that H-Cu-Al/BC can serve as a promising adsorbent for the removal of NH4 +-N from aqueous solutions.

Atomic layer deposition-assisted growth of CuAl LDH on carbon fiber as a peroxidase mimic for colorimetric determination of H2O2 and glucose

An atomic-layer-deposited Al₂O₃-induced LDH growth strategy was proposed to prepare carbon fiber-supported ultrathin CuAl LDH nanosheets (CF@CuAl-LDH). The CF@CuAl-LDH exhibited superior peroxidase-like catalytic activity.

Cu-Based mixed metal oxides for an efficient photothermal catalysis of the water-gas shift reaction

Cu–ZnO catalyst with a well-designed nanojunction structure was fabricated for the photothermal catalysis of the water-gas shift (WGS) reaction.

Multipath fabrication of hierarchical CuAl layered double hydroxide/carbon fiber composites for the degradation of ammonia nitrogen

In this work, a series of flower-like CuAl layered double hydroxides (LDHs) and hierarchical CuAl/carbon fiber-LDH (CuAl/CF-LDH) materials were synthesized, and these materials were used as catalysts for the degradation of ammonia nitrogen from simulated wastewater. The morphologies and structures of the materials were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy (RS), X-ray diffraction (XRD), and the Brunauer-Emmett-Teller (BET) technique. The effects of the catalyst and H₂O₂ loading dosages, reaction temperature, pH, Cu/Al ratio of the samples, and contact time on the degradation process were investigated by degrading ammonia nitrogen under different conditions, and the possible degradation mechanism was discussed. CuAl/CF-LDH exhibited more effectively catalytically degradation of ammonia nitrogen than others as-prepared samples, and removal efficiency reached 99.7% under the optimized conditions. The reusing capability and stability of the materials were studied. Meanwhile, the versatility of the materials was investigated by testing their performance in the absorption of azo dye, the highest removal efficiency was found to be 99.28%. The prepared materials are promising for use as effective catalysts for the degradation of ammonia nitrogen from wastewater.