A highly efficient deep red-emitting Mn4+-powered oxyfluoride nanophosphor developed for plant growth and optical thermometric applications

This research mainly highlighted an intense deep red-emitting and Mn4+-powered oxyfluoride nanophosphor, Mg14Ge4.99O16F8:0.01Mn4+ (MGOF:Mn), which was synthesized via adopting a scalable synthesis route for commercial temperature sensing and artificial plant growth applications. The electron microscopic analysis confirmed the formation of nanosized particles without any defined shape or size distribution. The obtained nanophosphor exhibited sharp emission peaks at 659 nm and 631 nm under UV (317 nm) and blue excitation (417 nm) owing to Mn4+:2Eg → 4A2g and Mn4+:2T1g → 4A2g transitions, respectively. The emission spectrum is situated in the deep red region of the CIE color diagram where the red color purity approached 100% under both the excitations. The absorption efficiency and the internal and external quantum efficiencies of this red-emitting system were calculated to be 53%, ∼77%, and ∼41%, respectively, under blue excitation of 417 nm, which indicated its potential for indoor plant cultivation. A prototype red LED was fabricated by pasting the red-emitting MGOF:Mn4+ nanophosphor powder on a 410 nm blue LED chip. The resulting electroluminescence spectrum overlapped with those of the important organic pigments of normal plants. Importantly, the thermometric properties of the nanophosphor were evaluated in detail for FIR and lifetime-based thermometry applications. The examined nanophosphor showed an extreme absolute sensitivity of 0.00326 K-1 at 373 K with excellent reproducibility and temperature resolution. Because of the small particle size and high luminescence efficiency, the nanophosphor could be implemented in various nano-devices where non-contact optical thermometry is necessary for high performance.

Li4 Zn(PO4 )2 :Mn2+ thermosensitive phosphor with dual luminescent centres for optical thermometry

An optical thermometry strategy based on Mn2+ -doped dual-wavelength emission phosphor has been reported. Samples with different doping content were synthesized through a high-temperature solid-phase method under an air atmosphere. The electronic structure of Li4 Zn(PO4 )2 was calculated using density functional theory, revealing it to be a direct band gap material with an energy gap of 4.708 eV. Moreover, the emitting bands of Mn2+ at 530 and 640 nm can be simultaneously observed when using 417 nm as the exciting wavelength. This is due to the occupation of Mn2+ at the Zn2+ site and the interstitial site. Further analysis was conducted on the temperature-dependent emission characteristics of the sample in the range 293-483 K. Mn2+ has different responses to temperature at different doping sites in Li4 Zn(PO4 )2 . Based on the calculations using the fluorescence intensity ratio technique, the maximum relative sensitivity at a temperature of 483 K was determined to be 1.69% K-1 , while the absolute sensitivity was found to be 0.12% K-1 . The results showed that the Li4 Zn(PO4 )2 :Mn2+ phosphor has potential application in optical thermometry.

Green and Red Photoluminescent Manganese Bromides with Aminomethylpyridine Isomers

Two positional isomers, 4-amino-3-methylpyridine and 3-amino-5-methylpyridine, produce 4-amino-3-methylpyridinium and 5-methylpyridin-3-aminium, respectively, under acidic conditions. The two protonated isomers create different hydrogen bonding networks, resulting in different coordination environments of the [MnX₄]^2- unit embedded in molecular compounds such as 4-amino-3-methylpyridinium manganese bromide, [(C₆H₉N₂)₂MnBr₄] and 5-methylpyridin-3-aminium manganese bromide, [(C₆H₉N₂)₄MnBr₄(H₂O)·(MnBr₄)]. Both compounds can be prepared using the slow evaporation method or mechanochemical synthetic procedures. Single-crystal structure analysis of [(C₆H₉N₂)₂MnBr₄] and [(C₆H₉N₂)₄MnBr₄(H₂O)·(MnBr₄)] revealed different manganese halide units, including tetrahedral and tetrahedral with distorted trigonal bipyramidal structures, which emit photoluminescence in the green (527 nm) and red (607 nm) regions, respectively. Electronic structure calculations were conducted to support the validity and interpretation of the UV-vis and photoluminescence (PL) spectral data. Thin films deposited using the [(C₆H₉N₂)₂MnBr₄] precursor also exhibit PL properties. The diverse pseudo-three-dimensional networks can be constructed by using positional isomers with different hydrogen bonding pathways and π-π stacking of organic units, in which the design strategy successfully enables the tuning of various optical properties.

Crystal field optimization and fluorescence enhancement of a Mn4+-doped fluoride red phosphor with excellent stability induced by double-site metal ion replacement for warm WLED

The effective double-site metal ion replacement strategy was adopted to optimize the crystal field environment of a Mn⁴⁺-activated fluoride phosphor. In this study, a series of K_2yBa_1-ySi_1-xGe_xF₆:Mn⁴⁺ phosphors with optimized fluorescence intensity, excellent water resistance, and outstanding thermal stability was synthesized. The composition adjustment includes two different types of ion substitution based on the BaSiF₆:Mn⁴⁺ red phosphor: [Ge⁴⁺ → Si⁴⁺] and [K⁺ → Ba²⁺]. X-ray diffraction and theoretical analysis revealed that Ge⁴⁺ and K⁺ could be successfully introduced into BaSiF₆:Mn⁴⁺ to form new solid solution K_2yBa_1-ySi_1-xGe_xF₆:Mn⁴⁺ phosphors. The emission intensity enhancement and slight wavelength shift were detected in different cation replacement procedures. Furthermore, K_0.6Ba_0.7Si_0.5Ge_0.5F₆:Mn⁴⁺ with superior color stability performance possessed a negative thermal quenching phenomenon. Excellent water resistance was also found, which was more reliable than K₂SiF₆:Mn⁴⁺ commercial phosphor. A warm WLED with low correlated color temperature (CCT = 4000 K) and high color rendering index (R_a = 90.6) was successfully packaged by using K_0.6Ba_0.7Si_0.5Ge_0.5F₆:Mn⁴⁺ as the red light component, and it also exhibited high stability for different currents. These findings demonstrate that the effective double-site metal ion replacement strategy can open up a new avenue for designing new Mn⁴⁺-doped fluoride phosphors to improve the optical properties of WLEDs.

Recent Advances in Light-Conversion Phosphors for Plant Growth and Strategies for the Modulation of Photoluminescence Properties

The advent of greenhouses greatly promoted the development of modern agriculture, which freed plants from regional and seasonal constraints. In plant growth, light plays a key role in plant photosynthesis. The photosynthesis of plants can selectively absorb light, and different light wavelengths result in different plant growth reactions. Currently, light-conversion films and plant-growth LEDs have become two effective ways to improve the efficiency of plant photosynthesis, among which phosphors are the most critical materials. This review begins with a brief introduction of the effects of light on plant growth and the various techniques for promoting plant growth. Next, we review the up-to-date development of phosphors for plant growth and discussed the luminescence centers commonly used in blue, red and far-red phosphors, as well as their photophysical properties. Then, we summarize the advantages of red and blue composite phosphors and their designing strategies. Finally, we describe several strategies for regulating the spectral position of phosphors, broadening the emission spectrum, and improving quantum efficiency and thermal stability. This review may offer a good reference for researchers improving phosphors to become more suitable for plant growth.

Review of Mn-Doped Semiconductor Nanocrystals for Time-Resolved Luminescence Biosensing/Imaging

Colloidal semiconductor nanocrystals (NCs) have been developed for decades and are widely applied in biosensing/imaging. However, their biosensing/imaging applications are mainly based on luminescence-intensity measurement, which suffers from autofluorescence in complex biological samples and thus limits the biosensing/imaging sensitivities. It is expected for these NCs to be further developed to gain luminescence features that can overcome sample autofluorescence. On the other hand, time-resolved luminescence measurement utilizing long-lived-luminescence probes is an efficient technique to eliminate short-lived autofluorescence of samples while recording time-resolved luminescence of the probes for signal measurement after pulsed excitation from a light source. Despite time-resolved measurement being very sensitive, the optical limitations of many of the current long-lived-luminescence probes cause time-resolved measurement to be generally performed in laboratories with bulky and costly instruments. In order to apply highly sensitive time-resolved measurement for in-field or point-of-care (POC) testing, it is essential to develop probes possessing high brightness, low-energy (visible-light) excitation, and long lifetimes of up to milliseconds. Such desired optical features can significantly simplify the design criteria of time-resolved measurement instruments and facilitate the development of low-cost, compact, sensitive instruments for in-field or POC testing. Mn-doped NCs have recently been in rapid development and provide a strategy to solve the challenges faced by both colloidal semiconductor NCs and time-resolved luminescence measurement. In this review, we outline the major achievements in the development of Mn-doped binary and multinary NCs, with emphasis on their synthesis approaches and luminescence mechanisms. Specifically, we demonstrate how researchers approached these obstacles to achieve the aforementioned desired optical properties on the basis of the progressive understanding of Mn emission mechanisms. Afterward, we review representative applications of Mn-doped NCs in time-resolved luminescence biosensing/imaging and present the potential of Mn-doped NCs in advancing time-resolved luminescence biosensing/imaging for in-field or POC testing.

Diffusing Mn4+ into Dy3+ Doped SrAl2O4 for Full-Color Tunable Emissions

Dy³⁺ and Mn⁴⁺ codoped SrAl₂O₄ (SrAl₂O₄:Dy³⁺,Mn⁴⁺) phosphors were obtained by diffusing Mn⁴⁺ ions into Dy³⁺-doped SrAl₂O₄ via the constant-source diffusion technique. The influences of diffusion temperature and diffusion time on the emissions of SrAl₂O₄:Dy³⁺,Mn⁴⁺ were investigated. It was found that: (i) efficient red emission peaking at 651 nm can be readily achieved for SrAl₂O₄:Dy³⁺ by simply diffusing Mn⁴⁺ into SrAl₂O₄:Dy³⁺ at 800 °C and above; (ii) the red emission of Mn⁴⁺ becomes dominant over the characteristic emissions of Dy³⁺ when the diffusion temperature is 900 °C or higher; and (iii) the intensity of the red emission of SrAl₂O₄:Dy³⁺,Mn⁴⁺ is far more sensitive to diffusion temperature than to diffusion time. Our results have demonstrated that full-color tunable emissions can be realized for SrAl₂O₄:Dy³⁺, Mn⁴⁺ by tuning the parameters of diffusion temperature and diffusion time, which opens up a space for realizing easy color control of Dy³⁺-doped inorganic materials.

Persistent phosphors for luminous paints: A review

The paper briefly reports the fundamental scientific principles and landmarks in the field of luminescence and further enlightens the importance of persistent phosphor that is now widely used in luminous paints. Its main focus is on phosphorescence that makes use of lanthanides that have gained paramount importance in various cross-sections of luminescent applications.. Both inorganic and organic afterglow materials, synthesis and characterization along with skilled researchers' essential updates on emerging trends and efforts are elucidated at length. It exclusively reviews the red/green/blue organic/inorganic/hybrid phosphorescent materials and the latest advances in the development of novel long afterglow materials that can accelerate the green technology in the world of luminescence.

Structural designing of Zn2SiO4:Mn nanocrystals by co-doping of alkali metal ions in mesoporous silica channels for enhanced emission efficiency with short decay time

High purity Zn₂SiO₄:Mn crystals were synthesized by impregnating a precursor solution into mesoporous silica followed by sintering process. The effects of doping alkali metal ions (Li⁺, Na⁺, K⁺) on the structural, morphological and photoluminescence properties were investigated. Formation of single phase α-Zn₂SiO₄:Mn crystals was confirmed from X-ray diffraction. The crystal size was significantly decreased from 54 nm to 35 nm with increasing molar concentration of alkali metal ion dopants in Zn₂SiO₄:Mn. Zn₂SiO₄:Mn crystals co-doped with alkali metal ions showed stronger emission and faster decay times compared to the un-doped Zn₂SiO₄:Mn phosphor. The highest emission quantum yields (EQEs) of 68.3% at λ_exc 254 and 3.8% at λ_exc 425 nm were obtained for the K⁺ ion doped samples with Mn²⁺ : K⁺ ratio of ∼1 : 1. With alkali metal ions (Li⁺, Na⁺, K⁺) co-doping, the decay time of Zn₂SiO₄:Mn crystals was shortened to ∼4 ms, whereas the emission intensity was elevated, with respect to un-doped Zn₂SiO₄:Mn crystals. Zn₂SiO₄:Mn crystal growth in silica pores together with selective doping with alkali metal ions paves a way forward to shorten the phosphor response time, without compromising emission efficiency.

Alkali metal ions co-doped Zn₂SiO₄:Mn nanocrystals were synthesized in a mesoporous silica matrix using solution impregnation method. A high PL-QY of 68.3% at λ_exc 254 nm and 3.8% at λ_exc 425 nm with faster decay time of <5 ms is obtained.

Research Advances on Human-Eye-Sensitive Long Persistent Luminescence Materials

Based on the actual application requirements of multicolor long persistent luminescence (LPL) materials, we highlight the recent developments in the last decade on human-eye-sensitive LPL materials and try to make a full list of known LPL compounds possessing wavelengths of 400-600 nm and a duration time longer than 10 h (>0.32 mcd/m²); these are more sensitive to the human eye's night vision and can be used throughout the night. We further emphasize our group research of novel LPL materials and the regulation of LPL color to enable a full palette. In the end, we try to summarize the challenges and perspectives of LPL materials for potential research directions based on our limited understandings. This review could offer new enlightenment for further exploration of new LPL materials in the visible light range and related applications.

Comparative study between pure and manganese doped copper sulphide (CuS) nanoparticles

The pure CuS and Mn2+ doped CuS nanoparticles are synthesized by wet chemical route. The CuS phase and hexagonal crystal structure is confirmed by the powder X-ray diffraction and Raman analysis. The vibrational bonds present in the respective synthesized samples are confirmed by Fourier transformed infra-red spectroscopy. The spherical shapes of the nanoparticles are validated by the electron diffraction in scanning and transmission mode. The thermal analysis showed the Mn2+ doped CuS nanoparticles to be more stable than pure CuS nanoparticles. The thermal parameters determined using Coats-Redfern relation stated thermal activation energy and enthalpy change values are highest in the higher temperature range. The Seebeck coefficient variation with temperature and ambient condition Hall effect measurements showed the synthesized nanoparticles to be semiconducting and p-type in nature. The magnetic properties study by Gouy method showed the nanoparticles to be paramagnetic.

Short review on recent progress in Mn4+ -activated oxide phosphors for indoor plant light-emitting diodes

In the modern era, growing number of indoor plants for various purposes, such as vegetation, flowering, and decorations, has increased over the traditional follow-up trends for plantation. However, the indoor plantation requires different parameters for their growth; among these, light plays a significant role. In order to control the growth of plants using light-emitting diodes, Mn-doped oxide phosphors have emerged as promising candidates due to their broad and intense emission bands in the red and far-red spectral range. In this review article, recent progress on Mn-doped oxides for indoor plant growth has been reviewed. This review article is mainly divided into three parts. In the first part, different reaction conditions for the synthesis of Mn-doped oxide phosphors are compared. In the second part, the luminescent and other photometric parameters of these are discussed. The influence of different co-dopants on the luminescent characteristics has been elucidated in detail. The third part discusses the properties of light-emitting diodes fabricated using these phosphors for plant growth. The present review article elucidates the synthesis parameters, luminescent properties, and light-emitting diodes fabricated using Mn-doped oxide materials for plant growth applications.

Bright Blue Emitting Cu-Doped Cs2ZnCl4 Colloidal Nanocrystals

We report here the synthesis of undoped and Cu-doped Cs₂ZnCl₄ nanocrystals (NCs) in which we could tune the concentration of Cu from 0.7 to 7.5%. Cs₂ZnCl₄ has a wide band gap (4.8 eV), and its crystal structure is composed of isolated ZnCl₄ tetrahedra surrounded by Cs⁺ cations. According to our electron paramagnetic resonance analysis, in 0.7 and 2.1% Cu-doped NCs the Cu ions were present in the +1 oxidation state only, while in NCs at higher Cu concentrations we could detect Cu(II) ions (isovalently substituting the Zn(II) ions). The undoped Cs₂ZnCl₄ NCs were non emissive, while the Cu-doped samples had a bright intragap photoluminescence (PL) at ∼2.6 eV mediated by band-edge absorption. Interestingly, the PL quantum yield was maximum (∼55%) for the samples with a low Cu concentration ([Cu] ≤ 2.1%), and it systematically decreased when further increasing the concentration of Cu, reaching 15% for the NCs with the highest doping level ([Cu] = 7.5%). The same (∼2.55 eV) emission band was detected under X-ray excitation. Our density functional theory calculations indicated that the PL emission could be ascribed only to Cu(I) ions: these ions promote the formation of trapped excitons, through which an efficient emission takes place. Overall, these Cu-doped Cs₂ZnCl₄ NCs, with their high photo- and radio-luminescence emission in the blue spectral region that is free from reabsorption, are particularly suitable for applications in ionizing radiation detection.

Enhancing Luminescence and Controlling the Mn Valence State of Gd3Ga5-x-δAlx-y+δO12:yMn Phosphors by the Design of the Garnet Structure

Gd₃Ga_5-x-δAl_x-y+δO₁₂:yMn solid solutions with improving luminescence properties were prepared via cation substitution and a controllable Mn valence state. The abnormal autoreduction from Mn⁴⁺ to Mn²⁺ ions was observed during the formation of Gd₃Ga_5-x-δAl_x-y+δO₁₂:yMn. The doped manganese ions occupy octahedral Ga³⁺(1) and Al³⁺(1) sites to form the Mn²⁺ luminescent center with red emission at 630 nm and Mn⁴⁺ luminescent centers with deep red light emission at 698 nm, respectively, matching well with the red light absorption of phytochrome (P_R) and the far-red light absorption of phytochrome (P_FR). With the design of the concentration of Al³⁺ and doped manganese ions, the photoluminescence (PL) of Mn⁴⁺/Mn²⁺ (corresponding to P_FR/P_R) can be tuned, which is very useful for controlling the plant growth. Moreover, the PL intensity of Gd₃Ga_5-x-δAl_x-y+δO₁₂:yMn can be increased by 6.8 times by substituting Al³⁺ for Ga³⁺. The thermal stability is also enhanced significantly. Finally, a series of warm white-light-emitting diodes (WLEDs) with good performance were fabricated using the as-prepared Gd₃Ga_5-x-δAl_x-0.012+δO₁₂:0.012Mn phosphor. The results show that the designed Gd₃Ga_5-x-δAl_x-y+δO₁₂:yMn phosphors have potential practical values in plant-growth light-emitting diodes (LEDs) and high-performance WLEDs. Moreover, our strategy not only provides a unique inspiration for tuning the valence states of Mn but also designs new advanced luminescent materials.

TemperatureDependent Luminescence of RedEmitting Ba2Y5B5O17: Eu3+ Phosphors with Efficiencies Close to Unity for NearUV LEDs

Solid state white light sources based on a near-UV LED chip are gaining more and more attention. This is due to the increasing efficiency of near-UV-emitting LED chips and wider phosphors selection if compared to devices based on blue LED chips. Here, a brief overview is given of the concepts of generating white light employing near-UV LED and some optical properties of the available phosphors are discussed. Finally, the synthesis and optical properties of very efficient red-emitting Ba₂Y₅B₅O₁₇:Eu³⁺ phosphor powder and ceramics is reported and discussed in terms of possible application as a red component in near-UV LED-based white light sources.

Manganese(II) in Tetrahedral Halide Environment: Factors Governing Bright Green Luminescence

Finding narrow-band light emitters for the visible spectral region remains an immense challenge. Such phosphors are in great demand for solid-state lighting and display application. In this context, green luminescence from tetrahedrally coordinated Mn(II) is an attractive research direction. While the oxide-ligand environment had been studied for decades, much less systematic efforts have been undertaken with regard to halide coordination, especially in the form of fully inorganic halide matrixes. In this study, we synthesized a series of hybrid organic-inorganic Mn(II) halides as well as a range of fully inorganic Zn halide hosts (chlorides, bromides, iodides) doped with Mn(II). In the latter, tetrahedral coordination is attained via substitutional doping owing to the tetrahedral symmetry of Zn sites. We find that the choice of the halide as well as subtle details of the crystal structure profoundly govern the photoluminescence peak positions (500-550 nm range) and emission line widths (40-60 nm) as well as radiative lifetimes (shorter for iodides) through the altered ligand-field effects and degrees of spin-orbit coupling. The photoluminescence quantum yields were as high as 70-90%. The major hurdle for the practical use of these compounds lies in their low absorption coefficients in the blue spectral regions.

Organic-to-water dispersible Mn:ZnS–ZnS doped core–shell quantum dots: synthesis, characterization and their application towards optical bioimaging and a turn-off fluorosensor

Dot-in-dot core/shell Mn:ZnS/ZnS QDs as a good fluorescent agent for bioimaging and a turn-off fluorescent probe for detection of heavy metal ions.

Thermally stable La2LiSbO6:Mn4+,Mg2+far-red emitting phosphors with over 90% internal quantum efficiency for plant growth LEDs

In this paper, we reported on the high-efficiency and thermally-stable La₂LiSbO₆:Mn⁴⁺,Mg²⁺ (LLS:Mn⁴⁺,Mg²⁺) far-red emitting phosphors. Under 338 nm excitation, the composition-optimized LLS:0.3%Mn⁴⁺,1.6%Mg²⁺ phosphors which were made up of [SbO₆], [LiO₆], and [LaO₈] polyhedrons, showed intense far-red emissions peaking at 712 nm (²E_g → ⁴A_2g transition) with internal quantum efficiency as high as 92%. The LLS:0.3%Mn⁴⁺,1.6%Mg²⁺ phosphors also exhibited high thermal stability, and the emission intensity at 423 K only reduced by 42% compared with its initial value at 303 K. The far-red light-emitting device has also been made by using the LLS:0.3%Mn⁴⁺,1.6%Mg²⁺ phosphors and a 365 nm emitting InGaN chip, which can emit far-red light that is visible to the naked eye. Importantly, the emission spectrum of the LLS:0.3%Mn⁴⁺,1.6%Mg²⁺ phosphors can match well with the absorption spectrum of phytochrome P_FR, indicating the potential of these phosphors to be used in plant growth light-emitting diodes.

Double perovskite La₂LiSbO₆:Mn⁴⁺,Mg²⁺ far-red emitting phosphors with internal quantum efficiency as high as 92% and good thermal stability were developed for plant growth LEDs.

Efficient rare-earth free red-emitting Ca2YSbO6:Mn4+,M(M = Li+, Na+, K+, Mg2+) phosphors for white light-emitting diodes

The structure, luminescence and practical application of non-rare-earth doped double perovskite Ca₂YSbO₆:Mn⁴⁺red phosphors are reported.

Preparation, characterization, and luminescence properties of double perovskite SrLaMgSbO6:Mn4+ far-red emitting phosphors for indoor plant growth lighting

Mn⁴⁺-activated SrLaMgSbO₆ far-red emitting phosphors with double perovskite structure were prepared by traditional solid-state reaction. The research on the crystal structure of the SrLaMgSbO₆:0.8%Mn⁴⁺ (SLMS:0.8%Mn⁴⁺) phosphors showed that the as-prepared sample was made up of two polyhedrons, [SbO₆] and [MgO₆]. Under the excitation of 333 nm, the SLMS:0.8%Mn⁴⁺ phosphors exhibited an intense far-red emission in the 625–800 nm wavelength range with CIE chromaticity coordinates of (0.733, 0.268), which could match well with the absorption spectrum of phytochrome P_FR. The optimal concentration of Mn⁴⁺ ions in the SLMS:Mn⁴⁺ phosphors was 0.8 mol%. Importantly, the as-prepared SLMS:0.8%Mn⁴⁺ phosphors had an internal quantum efficiency of 35%. The thermal stability of SLMS:0.8%Mn⁴⁺ phosphors was also investigated, and the activation energy was found to be 0.3 eV. Thus, the Mn⁴⁺-activated SLMS phosphors have great potential to serve as far-red emitting phosphors in indoor plant growth lighting.

Novel far-red emitting double perovskite SrLaMgSbO₆:Mn⁴⁺ phosphors were prepared and their photoluminescence properties were studied for applications in indoor plant growth lighting.

Far-red-emitting double-perovskite CaLaMgSbO6:Mn4+ phosphors with high photoluminescence efficiency and thermal stability for indoor plant cultivation LEDs

A series of Mn⁴⁺-activated CaLaMgSbO₆ far-red-emitting phosphors were synthesized by a solid-state reaction route and the microstructure and optical characterizations were investigated in detail. Upon excitation at 370 and 469 nm, the samples showed intense far-red emission at about 708 nm originating from the ²E_g → ⁴A_2g transition and the optimal Mn⁴⁺ concentration was 0.7 mol%. The as-prepared phosphors also exhibited excellent internal quantum efficiency (88%) and high thermal stability. The emission intensity at room temperature dropped to 54% when the temperature rose to 423 K and the activation energy was 0.34 eV. The outstanding optical properties and the fact that the emission band of the obtained phosphors had a broad overlap with the absorption band of phytochrome P_FR demonstrated that the CaLaMgSbO₆:Mn⁴⁺ phosphors may be promising potential spectral converters for applying to indoor plant cultivation light-emitting diodes.

Far-red-emitting double-perovskite CaLaMgSbO₆:Mn⁴⁺ phosphors with high quantum efficiency and thermal stability were developed for potential applications in indoor plant cultivation LEDs.