Coembedding Fe Single Atom-Coupled MoC Nanoparticles in N-Doped Hierarchically Porous Carbon Cubes for Oxygen Electroreduction

Promotion of oxygen reduction reaction (ORR) kinetics, to a large extent, depends on the rational modulation of the electronic structure and mass diffusion of electrocatalysts. Herein, a ferrocene (Fc)-assisted strategy is developed to prepare Fc-trapped ZnMo-hybrid zeolitic imidazolate framework (Fc@ZnMo-HZIF-50) and the derived Fe single atom coupling with MoC nanoparticles, coembedded in hierarchically porous N-doped carbon cubes (MoC@FeNC-50). The introduced Fc is utilized not only as an iron source for single atoms but also as a morphology regulator for generating a hierarchically porous structure. The redistribution of electrons between Fe single atoms and MoC nanoparticles effectively promotes the adsorption of O2 and the formation of *OOH intermediates during the ORR process. Along with a 3D hierarchically porous architecture for enhanced mass transport, the as-fabricated MoC@FeNC-50 presents excellent activity (E1/2 = 0.83 V) and durability (only 9.5% decay in current after 40000 s). This work could inspire valuable insights into the construction of efficient electrocatalysts through electron configuration and kinetics engineering.

Universal Intercalation/Alloying Hybrid Mechanism with -ICOHP Criterion in MAX Toward Steadily Ascending Lithium-Ion Batteries

Profiting from the unique atomic laminated structure, metallic conductivity, and superior mechanical properties, transition metal carbides and nitrides named MAX phases have shown great potential as anodes in lithium-ion batteries. However, the complexity of MAX configurations poses a challenge. To accelerate such application, a minus integrated crystal orbital Hamilton populations descriptor is innovatively proposed to rapidly evaluate the lithium storage potential of various MAX, along with density functional theory computations. It confirms that surface A-element atoms bound to lithium ions have odds of escaping from MAX. Interestingly, the activated A-element atoms enhance the reversible uptake of lithium ions by MAX anodes through an efficient alloying reaction. As an experimental verification, the charge compensation and SnxLiy phase evolution of designed Zr2SnC MAX with optimized structure is visualized via in situ synchrotron radiation XRD and XAFS technique, which further clarifies the theoretically expected intercalation/alloying hybrid storage mechanism. Notably, Zr2SnC electrodes achieve remarkably 219.8% negative capacity attenuation over 3200 cycles at 1 A g-1. In principle, this work provides a reference for the design and development of advanced MAX electrodes, which is essential to explore diversified applications of the MAX family in specific energy fields.

Utilization and value-adding of waste: Fabrication of porous material from chitosan for phosphate capture and energy storage

Efficient removal and recycling of phosphorus from complex water matrices using environmentally friendly and sustainable materials is essential yet challenging. To this end, a novel bio-based adsorbent (DX-FcA-CS) was developed by coupling oxidized dextran-crosslinked chitosan with ferrocene carboxylic acid (FcA). Detailed characterization revealed that the incorporation of FcA reduced the total pore area of DX-FcA-CS to 7.21 m2·g-1, one-third of ferrocene-free DX-CS (21.71 m2·g-1), while enhancing thermal stability and PO43- adsorption performance. Adsorption kinetics and isotherm studies demonstrated that the interaction between DX-FcA-CS and PO43- followed a pseudo-second-order kinetic model and Langmuir model, indicating chemical and monolayered adsorption mechanisms, respectively. Moreover, DX-FcA-CS exhibited excellent anti-interference properties against concentrated co-existing inorganic ions and humic acid, along with high recyclability. The maximum adsorption capacity reached 1285.35 mg·g-1 (∼428.45 mg P g-1), three times that of DX-CS and surpassing many other adsorbents. PO43--loaded DX-FcA-CS could be further carbonized into electrode material due to its rich content of phosphorus and nitrogen, transforming waste into a valuable resource. These outstanding characteristics position DX-FcA-CS as a promising alternative for phosphate capture and recycling. Overall, this study presents a viable approach to designing environmentally friendly, recyclable, and cost-effective biomaterial for wastewater phosphate removal and value-added applications.

Dipole-Moment Modulation in New Incommensurate Ferrocene

Despite 70 years of research on metallocenes and their applications, there are still unresolved regions in its phase diagram of the prototypic sandwich compound, ferrocene Fe²⁺[C₅H₅]^-₂ (FeCp₂), and its molecular 5-fold symmetry cannot be reconciled with the dielectric response of this crystal. We found a new phase I″ of ferrocene, which reveals the relationships between the molecular conformation, intermolecular interactions, and electric permittivity of this compound. Between 172.8 and 163.5 K, the conformational disorder of ferrocene molecules transforms into the incommensurate modulation. The structure of phase I″ is described in the (3+2)-dimensional superspace, where the molecular conformations, rotations and inclinations of the Cp rings, molecular tilts, and displacements of the Fe²⁺ cations, as well as the CH···π bonds in the crystal environment, are modulated. These geometric changes combine into the FeCp₂ bending distortion, breaking the 5-fold symmetry and generating waves of molecular dipole moments with their amplitudes approaching 4 × 10^-30 C·m.

Oxidized dextran-crosslinked ferrocene-chitosan-PEI composite porous material integrating adsorption and degradation to malachite green

Treating wastewater containing malachite green (MG) using porous materials with both adsorption and degradation functions have become a major challenge in achieving the carbon neutrality goal. Herein by incorporating the ferrocene (Fc) group as a Fenton active center, a novel composite porous material (DFc-CS-PEI) was prepared using chitosan (CS) and polyethyleneimine (PEI) as skeletons and oxidized dextran as a crosslinker. DFc-CS-PEI not only possesses satisfactory adsorption performance to MG but also excellent degradability in the presence of a minor amount of H₂O₂ (3.5 mmol/L) without any additional assistance, due to high specific surface area and active Fc group. The maximum adsorption capacity is ca. 177.73 ± 3.11 mg/g, outperforming most CS-based adsorbents. The removal efficiency of MG is significantly enhanced from 20 % to 90 % as DFc-CS-PEI and H₂O₂ coexist, due to ^·OH-dominated Fenton reaction, and remained in a wide pH range (2.0-7.0). Cl^- exhibits notable suppression on the degradation of MG because of quenching effects. Note that DFc-CS-PEI has a very small iron leaching (0.2 ± 0.015 mg/L), and can be rapidly recycled by simple water-washing, without any harmful chemicals and potential second pollution. Such versatility, high stability, and green recyclability make the as-prepared DFc-CS-PEI a promising porous material for the treatment of organic wastewater.

Closed Bipolar Electrode-Enabled Electrochromic Sensing of Multiple Metabolites in Whole Blood

We report a closed bipolar electrode (CBE)-based sensing platform for the detection of diagnostic metabolites in undiluted whole human blood. The sensor is enabled by electrode chemistry based on: (1) a mixed layer of blood-compatible adsorption-resistant phosphorylcholine (PPC) and phenylbutyric acid (PBA), (2) ferrocene (Fc) redox mediators, and (3) immobilized redox-active enzymes. This scheme is designed to overcome nonspecific protein adsorption and amplify sensing currents in whole human fluids. The scheme also incorporates a diffusing mediator to increase electronic communication between the immobilized redox enzyme and the working electrode. The use of both bound and freely diffusing mediators is synergistic in producing the electrochemical response. The sensor is realized by linking the analyte cell, containing the specific electrode surface architecture, through a CBE to a reporter cell containing the electrochromic reporter, methyl viologen (MV). The colorless-to-purple color change accompanying the 1e^- reduction of MV²⁺ is captured using a smartphone camera. Subsequent red-green-blue analysis is performed on the acquired images to determine cholesterol, glucose, and lactate concentrations in whole blood. The CBE blood metabolite sensor produces a linear color change at clinically relevant concentration ranges for all metabolites with good reproducibility (∼5% or better) and with limits of detection of 79 μM for cholesterol, 59 μM for glucose, and 86 μM for lactate. Finally, metabolite concentration measurements from the CBE blood metabolite sensor are compared with results from commercially available FDA-approved blood cholesterol, glucose, and lactate meters, with an average difference of ∼3.5% across all three metabolites in the ranges studied.

A quest for cytocompatible metal organic frameworks in non-viral gene therapy: Relevance of zeolitic imidazolate framework-8

Metal-organic frameworks (MOFs) are an emerging group of nanomaterials for successful biomedical applications in gene therapy. The most commonly biocompatible MOFs are zinc-based ZIFs, zirconium-based UiOs, and iron-based MILs. However, despite increasing applications, a comparative study to underscore the critical factors for determining effective gene delivery by such MOFs is lacking. Herein, we evaluate the potential of UiO-66 and MIL-88B and ZIF-8 for gene therapeutics delivery; revealing the comparative importance of ZIF-8. Cytotoxicity assays proved insufficient for selecting the ideal gene delivery MOF vehicle. Synthesis conditions such as ability of the MOF scaffold to envelop the gene during in-situ synthesis, post-treatment such as washing, and gene loading efficiency proved to be the critical factors in determining the favourable MOF from the material selection perspective. Rapid in-situ synthesis under physiological conditions, successful gene loading, and low concentration requirements favour ZIF MOFs as gene delivery vehicles. Impact on cellular physiology, metabolism, and architecture revealed neutrality of the delivery system; and relative effects on pro-inflammatory and anti-inflammatory cytokines suggest immunomodulatory impact.

3D-Printed Fe/γ-Al2O3 Monoliths from MOF-Based Boehmite Inks for the Catalytic Hydroxylation of Phenol

The synthesis of dihydroxybenzenes (DHBZ), essential chemical reagents in numerous industrial processes, with a high degree of selectivity and yield from the hydroxylation of phenol is progressively attracting great interest in the catalysis field. Furthermore, the additive manufacturing of catalysts to produce 3D printed monoliths would provide additional benefits to enhance the DHBZ synthesis performance. Herein, 3D cellular Fe/γ-Al₂O₃ monoliths with a total porosity of 88% and low density (0.43 g·cm^-3) are printed by Robocasting from pseudoplastic Fe-metal-organic frameworks (Fe-MOF)-based aqueous boehmite inks to develop catalytic monoliths containing a Fe network of dispersed clusters (≤5 μm), nanoclusters (<50 nm), and nanoparticles (∼20 nm) into the porous ceramic skeleton. The hydroxylation of phenol in the presence of hydrogen peroxide is carried out at different reaction temperatures (65-85 °C) in a flow reactor filled with eight stacked 3D Fe/γ-Al₂O₃ monoliths and with the following operating conditions: C_phenol,0 = 0.33 M, C_phenol,0/C_H2O2,0 = 1:1 molar, W_R = 2.2 g, and space time (τ = W·Q_L^-1) = 0-147 g_cat·h·L^-1. The scaffolds present a good mechanical resistance (∼1 MPa) to be employed in a catalytic reactor and do not show any cracks or damage after the chemical reaction. DHBZ selectivity (S_DHBZ) of 100% with a yield (Y_DHBZ) of 32% due to the presence of the Fe network in the monoliths is reported at 85 °C, which represents an improved synthesis performance as compared to that obtained by using the conventional Enichem process and the well-known titanium silicalite-1 catalysts (S_DHBZ = 99.1% and Y_DHBZ = 29.6% at 80 °C). This printing strategy allows manufacturing novel 3D structured catalysts for the synthesis of critical chemical compounds with higher reaction efficiencies.

Metal–organic framework-assisted synthesis of Zr-modified SAPO-34 zeolites with hierarchical porous structure for the catalytic transformation of methanol to olefins

Zr-Modified SAPO-34 zeolites with hierarchical porous structure were synthesized in the presence of UiO-66. The Zr0.50-SAPO-34 zeolites exhibited long lifetimes (>1500 min) and excellent selectivity for light olefins (98.66%) in the MTO reaction.

Integration of Multiple Redox Centers into Porous Coordination Networks for Ratiometric Sensing of Dissolved Oxygen

The application of porphyrin metal-organic frameworks (MOFs) as a ratiometric electrochemical sensing platform is still unexplored. In this paper, we report a ratiometric electrochemical sensor by the integration of multiple redox centers into porphyrin MOFs for the detection of dissolved oxygen (DO). Specifically, the ferrocene (Fc) group was integrated into the nanosized PCN-222(Fe) (PCN = porous coordination networks) via acid-base reaction to synthesize the Fc@PCN-222(Fe) composite with two redox centers of the Fc group and Fe-porphyrin. The Fc group that is insensitive to DO serves as an internal reference, and the Fe-porphyrin in PCN-222(Fe) is a DO indicator. The ratios of the cathodic currents for the two redox centers exhibit a linear relationship with DO concentrations from 2.8 to 28.9 mg mL^-1 and a limit of detection of 0.3 mg mL^-1. In addition, the ratiometric electrochemical sensor has high selectivity and stability for DO sensing results from the Fc@PCN-222(Fe) composite. Because there are numerous redox centers, such as methylene blue and thionine, which can be integrated into MOFs, many MOF-based ratiometric electrochemical sensors can be simply developed for high-performance biosensing.

Electrochemical Applications of Ferrocene-Based Coordination Polymers

Ferrocene and its derivatives, especially ferrocene-based coordination polymers (Fc-CPs), offer the benefits of high thermal stability, two stable redox states, fast electron transfer, and excellent charge/discharge efficiency, thus holding great promise for electrochemical applications. Herein, we describe the synthesis and electrochemical applications of Fc-CPs and reveal how the incorporation of ferrocene units into coordination polymers containing other metals results in unprecedented properties. Moreover, we discuss the usage of Fc-CPs in supercapacitors, batteries, and sensors as well as further applications of these polymers, for example in electrocatalysts, water purification systems, adsorption/storage systems.

Finding a new pathway for acid-induced nitrite reduction reaction: formation of nitric oxide with hydrogen peroxide

Here, we report a new pathway for nitrite reduction chemistry, formation of cobalt-nitrosyl ({Co^II-NO}⁸) with H₂O₂ in the reaction of a Co^II-nitrito complex with a one-fold acid (H⁺) via the formation of a Co^II-nitrous acid intermediate ({Co^II-ONOH}). Mechanistic investigations using ¹⁵N-labeled-¹⁵NO₂^- revealed that the N-atom in the {Co^II-NO}⁸ complex is derived from the nitrito ligand, and H₂O₂ came from the homolysis of the ON-OH moiety. Spectral evidence supporting the formation of the Co^II-ONOH intermediate and the generation of H₂O₂ is also presented.

Facile synthesis of acid-modified UiO-66 to enhance the removal of Cr(VI) from aqueous solutions

The adsorption behavior and mechanism of Cr(VI) on different acid-modified UiO-66s (Form-UiO-66 and Ac-UiO-66) were systematically investigated for the first time through a series of characterizations, and theoretical calculations of batch experiments. The characterization results demonstrate that acid-modified UiO-66 exhibited a larger specific surface area than did unmodified UiO-66. In addition, since the regulator (formic acid) of Form-UiO-66 was the stronger competition, the specific surface area of Form-UiO-66 (1138 m² g^-1) was larger than that of Ac-UiO-66 (915 m² g^-1). Under optimal experimental conditions, the maximum adsorption capacity of Cr(VI) was 243.9 mg g^-1 on Form-UiO-66, and 151.52 mg g^-1 on Ac-UiO-66, which was far higher than on the reported unmodified UiO-66 (36.4 mg g^-1). The results of pH testing, zeta potential, and X-ray photoelectron spectroscopy analysis indicate that Cr(VI) ions were fixed to adsorbent surfaces via electrostatic adsorption. Acid-modified UiO-66 increased the surface active site via the increase in its specific surface area to enhance adsorption capacity of Cr(VI). These results indicated that both the surface charge and specific surface area of the adsorbent primarily determined the Cr(VI) adsorption capacity. Acid modified UiO-66 exhibited enhanced adsorption capacity, stability, and regeneration, compared to traditional adsorbents, and these results provide new insights into adsorption by MOFs.

HPW-Anchored UiO-66 Metal-Organic Framework: A Promising Photocatalyst Effective toward Tetracycline Hydrochloride Degradation and H2 Evolution via Z-Scheme Charge Dynamics

The abolition of environmental pollutants and production of hydrogen (H₂) from water using a heterogeneous photocatalyst is a demanding science of the current scenario to solve the increasing environmental pollution and worldwide energy catastrophe in modern life. To validate this purpose, the design of low-cost and durable semiconductor-based photocatalysts with great light absorption capacity becomes the most challenging issue for researchers. Regarding this, herein the phosphotungstic acid (HPW)-anchored Zr₆O₄(OH)₄(BDC)₆ (UiO-66) metal-organic framework (MOF), i.e., HPW@UiO-66, has been prepared by a hydrothermal method and is efficient, stable, and capable of harvesting solar energy toward the degradation of tetracycline hydrochloride (TCH) and H₂ production in the presence of a sacrificial donor. The ionic interaction between HPW and UiO-66 plays a key role toward the photostability and charge-transfer mechanism of the composite and is well characterized with X-ray diffraction, UV diffuse-reflectance spectroscopy, Fourier transform infrared, and X-ray photoelectron spectroscopy. A total of 30 wt % HPW@UiO-66 shows a maximum degradation of about 87.24% of a 20 ppm TCH solution in 60 min of solar-light irradiation and about 353.89 μmol/h of H₂ production. The conduction- and valence-band potentials are well characterized with Mott-Schottky measurement and a delay charge recombination process through electrochemical impedance spectroscopy. The proposed mediator-free Z-scheme-oriented electron-hole migration route is well supported by photoluminescence, and the scavenger test well explains the better charge-carrier separation and high catalytic performance of the prepared composite. This research will bestow an advantageous blueprint to fabricate novel and challenging photocatalysts toward the photocatalytic treatment of environmental pollutants and H₂ evolution.

Vanadium-based polyoxometalate complex as a new and efficient catalyst for phenol hydroxylation under mild conditions

A polyoxovanadate complex, synthesized under mild conditions, served as the catalyst for clean conversion of phenol to catechol and hydroquinone in water.