Modulation of the Lower Critical Solution Temperature of Thermoresponsive Poly(N-vinylcaprolactam) Utilizing Hydrophilic and Hydrophobic Monomers

Four-dimensional printing is primarily based on the concept of 3D printing technology. However, it requires additional stimulus and stimulus-responsive materials. Poly-N-vinylcaprolactam is a temperature-sensitive polymer. Unique characteristics of poly-N-vinylcaprolactam -based hydrogels offer the possibility of employing them in 4D printing. The main aim of this study is to alter the phase transition temperature of poly-N-vinylcaprolactam hydrogels. This research focuses primarily on incorporating two additional monomers with poly-N-vinylcaprolactam: Vinylacetate and N-vinylpyrrolidone. This work contributes to this growing area of research by altering (increasing and decreasing) the lower critical solution temperature of N-vinylcaprolactam through photopolymerisation. Poly-N-vinylcaprolactam exhibits a lower critical solution temperature close to the physiological temperature range of 34-37 °C. The copolymers were analysed using various characterisation techniques, such as FTIR, DSC, and UV-spectrometry. The main findings show that the inclusion of N-vinylpyrrolidone into poly-N-vinylcaprolactam increased the lower critical solution temperature above the physiological temperature. By incorporating vinylacetate, the lower critical solution temperature dropped to 21 °C, allowing for potential self-assembly of 4D-printed objects at room temperature. In this case, altering the lower critical solution temperature of the material can potentially permit the transformation of the 4D-printed object at a particular temperature.

A plasmon-enhanced fluorescent gold coated novel lipo-polymeric hybrid nanosystem: synthesis, characterization and application for imaging and photothermal therapy of breast cancer

This study reports a hybrid lipo-polymeric nanosystem (PDPC NPs) synthesized by a modified hydrogel-isolation technique. The ability of the nanosystem to encapsulate hydrophilic and hydrophobic molecules has been demonstrated, and their enhanced cellular uptake has been observed in vitro. The PDPC NPs, surface coated with gold by in situ reduction of chloroauric acid (PDPC-Au NPs), showed a photothermal transduction efficacy of ∼65%. The PDPC-Au NPs demonstrated an increase in intracellular ROS, triggered DNA damage and resulted in apoptotic cell death when tested against breast cancer cells (MCF-7). The disintegration of PDPC-Au NPs into smaller nanoparticles with near-infrared (NIR) laser irradiation was understood using transmission electron microscopy imaging. The lipo-polymeric hybrid nanosystem exhibited plasmon-enhanced fluorescence when loaded with IR780 (a NIR dye), followed by surface coating with gold (PDPC-IR-Au NPs). This paper is one of the first reports on the plasmon-enhanced fluorescence within a nanosystem by simple surface coating of Au, to the best of our knowledge. This plasmon-enhanced fluorescence was unique to the lipo-polymeric hybrid system, as the same was not observed with a liposomal nanosystem. The plasmon-enhanced fluorescence of PDPC-IR-Au NPs, when applied for imaging cancer cells and zebrafish embryos, showed a strong fluorescence signal at minimal concentrations of the dye. The PDPC-IR-Au NPs were also applied for photothermal therapy of breast cancer in vitro and in vivo, and the results depicted significant therapeutic benefits.

Chemical Modification of Chitosan for Developing Cancer Nanotheranostics

Cancer is a worldwide public health issue that has not been conquered. Theranostics, the combination of a therapeutic drug and imaging agent in one formulation using nanomaterials, has been developed to better cure cancer in recent years. Although diverse biomaterials have been applied in cancer theranostics, chitosan (CS), a natural polysaccharide bearing easy modification sites with excellent biocompatibility and biodegradability, shows great potential for developing cancer nanotheranostics. In this review, we seek to describe the chemical functionalities of CS used in cancer theranostics and their synthesis methods. We also present recent discoveries and research progresses on how the CS functionalization could improve the delivery efficiency of CS-based nanotheranostics. Finally, we report several case studies about the application of CS-based nanotheranostics. This paper focuses on the strategies to construct CS-based theranostics systems via chemical routes and highlights their applications in cancer treatment, which can provide useful references for further studies.

Chitosan-Based Biocompatible Copolymers for Thermoresponsive Drug Delivery Systems: On the Development of a Standardization System

Chitosan is a natural polysaccharide that is considered to be biocompatible, biodegradable and non-toxic. The polymer has been used in drug delivery applications for its positive charge, which allows for adhesion with and recognition of biological tissues via non-covalent interactions. In recent times, chitosan has been used for the preparation of graft copolymers with thermoresponsive polymers such as poly-N-vinylcaprolactam (PNVCL) and poly-N-isopropylamide (PNIPAM), allowing the combination of the biodegradability of the natural polymer with the ability to respond to changes in temperature. Due to the growing interest in the utilization of thermoresponsive polymers in the biological context, it is necessary to increase the knowledge of the key principles of thermoresponsivity in order to obtain comparable results between different studies or applications. In the present review, we provide an overview of the basic principles of thermoresponsivity, as well as a description of the main polysaccharides and thermoresponsive materials, with a special focus on chitosan and poly-N-Vinyl caprolactam (PNVCL) and their biomedical applications.

Smart and Biomimetic 3D and 4D Printed Composite Hydrogels: Opportunities for Different Biomedical Applications

In recent years, smart/stimuli-responsive hydrogels have drawn tremendous attention for their varied applications, mainly in the biomedical field. These hydrogels are derived from different natural and synthetic polymers but are also composite with various organic and nano-organic fillers. The basic functions of smart hydrogels rely on their ability to change behavior; functions include mechanical, swelling, shaping, hydrophilicity, and bioactivity in response to external stimuli such as temperature, pH, magnetic field, electromagnetic radiation, and biological molecules. Depending on the final applications, smart hydrogels can be processed in different geometries and modalities to meet the complicated situations in biological media, namely, injectable hydrogels (following the sol-gel transition), colloidal nano and microgels, and three dimensional (3D) printed gel constructs. In recent decades smart hydrogels have opened a new horizon for scientists to fabricate biomimetic customized biomaterials for tissue engineering, cancer therapy, wound dressing, soft robotic actuators, and controlled release of bioactive substances/drugs. Remarkably, 4D bioprinting, a newly emerged technology/concept, aims to rationally design 3D patterned biological matrices from synthesized hydrogel-based inks with the ability to change structure under stimuli. This technology has enlarged the applicability of engineered smart hydrogels and hydrogel composites in biomedical fields. This paper aims to review stimuli-responsive hydrogels according to the kinds of external changes and t recent applications in biomedical and 4D bioprinting.

Thermoresponsive Chitosan-Grafted-Poly(N-vinylcaprolactam) Microgels via Ionotropic Gelation for Oncological Applications

Microgels can be considered soft, porous and deformable particles with an internal gel structure swollen by a solvent and an average size between 100 and 1000 nm. Due to their biocompatibility, colloidal stability, their unique dynamicity and the permeability of their architecture, they are emerging as important candidates for drug delivery systems, sensing and biocatalysis. In clinical applications, the research on responsive microgels is aimed at the development of "smart" delivery systems that undergo a critical change in conformation and size in reaction to a change in environmental conditions (temperature, magnetic fields, pH, concentration gradient). Recent achievements in biodegradable polymer fabrication have resulted in new appealing strategies, including the combination of synthetic and natural-origin polymers with inorganic nanoparticles, as well as the possibility of controlling drug release remotely. In this review, we provide a literature review on the use of dual and multi-responsive chitosan-grafted-poly-(N-vinylcaprolactam) (CP) microgels in drug delivery and oncological applications.

Characterization of Thermoresponsive Poly-N-Vinylcaprolactam Polymers for Biological Applications

Poly-N-Vinylcaprolactam (PNVCL) is a thermoresponsive polymer that exhibits lower critical solution temperature (LCST) between 25 and 50 °C. Due to its alleged biocompatibility, this polymer is becoming popular for biomedical and environmental applications. PNVCL with carboxyl terminations has been widely used for the preparation of thermoresponsive copolymers, micro- and nanogels for drug delivery and oncological therapies. However, the fabrication of such specific targeting devices needs standardized and reproducible preparation methods. This requires a deep understanding of how the miscibility behavior of the polymer is affected by its structural properties and the solution environment. In this work, PNVCL-COOH polymers were prepared via free radical polymerization (FRP) in order to exhibit LCST between 33 and 42 °C. The structural properties were investigated with NMR, FT-IR and conductimetric titration and the LCST was calculated via UV-VIS and DLS. The LCST is influenced by the molecular mass, as shown by both DLS and viscosimetric values. Finally, the behavior of the polymer was described as function of its concentration and in presence of different biologically relevant environments, such as aqueous buffers, NaCl solutions and human plasma.

Construction of Fe3O4/SiO2/chitosan-grafted-poly(N-vinylcaprolactam) magnetic nanocomposite and their application in simultaneous extraction of Trans-resveratrol and its metabolites from rat plasma

A novel magnetic nanocomposite of chitosan-grafted-poly(N-vinylcaprolactam) (Fe₃O₄/SiO₂/CHT-g-PNVCL MNC) were synthesized. Chitosan was prepared from shrimp shells Penaeus monodon by a green deacetylation approach. N-vinylcaprolactam was first polymerized on the surface of Fe₃O₄ magnetic nanoparticles using surface-initiated atom transfer radical polymerization. Then, the Fe₃O₄ nanoparticles modified with carboxyl-terminated- poly(N-vinylcaprolactam) was grafted onto chitosan. Various techniques were used to characterize of physicochemical properties of synthesized nanomaterials. The application of Fe₃O₄/SiO₂/CHT-g-PNVCL MNC was utilized as a novel adsorbent for the simultaneous extraction of trans-resveratrol and its major phase II metabolites from rat plasma. A qualitative analysis was performed using ultra-performance liquid chromatography triple-quadrupole tandem mass spectrometry. Response surface methodology based on central composite design was used to optimize the extraction procedure including pH, amount of adsorbent, extraction time, desorption time, and volume of elution solvent. The established quantitative method succeeded in satisfying FDA requirements regarding biological analysis methods. The results of the validation of the method indicated its acceptable accuracy (-4.4 to 6.9%), linearity (r > 0.995), precision (CV < 6.3%), and stability. The lower limits of quantification of the proposed method achieved were 1.23-1.68 ngmL^-1for target analytes. The information obtained from the method validation has been used to estimate the expanded uncertainty for the determination of trans-resveratrol in rat plasma samples following orally administered trans-resveratrol. The method was applied to study the pharmacokinetics, metabolism, and bioavailability of trans-resveratrol in healthy rats following a single oral or intravenous dose.

Smart Hydrogels - Synthetic Stimuli-Responsive Antitumor Drug Release Systems

Among modern drug formulations, stimuli-responsive hydrogels also called "smart hydrogels" deserve a special attention. The basic feature of this system is the ability to change their mechanical properties, swelling ability, hydrophilicity, bioactive molecules permeability, etc., influenced by various stimuli, such as temperature, pH, electromagnetic radiation, magnetic field and biological factors. Therefore, stimuli-responsive matrices can be potentially used in tissue engineering, cell cultures and technology of innovative drug delivery systems (DDSs), releasing the active substances under the control of internal or external stimuli. Moreover, smart hydrogels can be used as injectable DDSs, due to gel-sol transition connected with in situ cross-linking process. Innovative smart hydrogel DDSs can be utilized as matrices for targeted therapy, which enhances the effectiveness of tumor chemotherapy and subsequently limits systemic toxicity. External stimulus sensitivity allows remote control over the drug release profile and gel formation. On the other hand, internal factors provide drg accumulation in tumor tissue and reduce the concentration of active drug form in healthy tissue. In this report, we summarise the basic knowledge and chemical strategies for the synthetic smart hydrogel DDSs applied in antitumor therapy.

Synthesis of chitosan-grafted-poly(N-vinylcaprolactam) coated on the thiolated gold nanoparticles surface for controlled release of cisplatin

The gold nanoparticles surface was modified by thioglycolic acid ligand and their surface was coated by the chitosan-grafted-poly(N-vinylcaprolactam) (chitosan-g-PNVCL) copolymer. The cisplatin anticancer drug was loaded into the synthesized nanocarriers and its performance was investigated for the treatment of MCF-7 breast cancer cells in vitro. The synthesized nanoparticles were characterized using FTIR, DLS, TEM, SEM, EDX and TGA analysis. The lower critical solution temperature (LCST) of PNVCL/chitosan and PNVCL/chitosan coated gold nanoparticles were found to be 38 and 39 °C, respectively. The cisplatin loading efficiency, cisplatin release from nanoparticles at different temperatures and pH values as well as the pharmacokinetic studies were examined. The maximum cisplatin release from nanoparticles was achieved at T > LCST (42 °C) and pH of 5. The Korsemeyer-Peppas model was best described the cisplatin release from nanoparticles. The maximum MCF cell death was found to be 92% using cisplatin loaded-gold/TGA/chitosan-g-PNVCL nanoparticles under an induction heating system.

A biodegradable fluorescent nanohybrid for photo-driven tumor diagnosis and tumor growth inhibition

Specific targeting and phototriggered therapy in mouse model have recently emerged as the starting point of cancer theragnosis. Herein, we report a bioresponsive and degradable nanohybrid, a liposomal nanohybrid decorated with red emissive carbon dots, for localized tumor imaging and light-mediated tumor growth inhibition. Unsaturated carbon dots (C-dots) anchored to liposomes convert near-infrared (NIR) light into heat and also produce reactive oxygen species (ROS), demonstrating the capability of phototriggered cancer cell death and tumor regression. The photothermal and oxidative damage of breast tumor by the nonmetallic nanohybrid has also been demonstrated. Designed nanoparticles show excellent aqueous dispersibility, biocompatibility, light irradiated enhanced cellular uptake, release of reactive oxygen species, prolonged and specific tumor binding ability and good photothermal response (62 °C in 5 minutes). Safe and localized irradiation of 808 nm light demonstrates significant tumor growth inhibition and bioresponsive degradation of the fluorescent nanohybrid without affecting the surrounding healthy tissues.

Plasmonic carbon nanohybrids for repetitive and highly localized photothermal cancer therapy

Integrating metallic and non-metallic platform for cancer nanomedicine is a challenging task and bringing together multi-functionality of two interfaces is a major hurdle for biomaterial design. Herein, NIR light responsive advanced hybrid plasmonic carbon nanomaterials are synthesized, and their properties toward repetitive and highly localized photothermal cancer therapy are well understood. Graphene oxide nanosheets having thickness of ∼2 nm are synthesized using modified Hummers' method, thereafter functionalized with biodegradable NIR light responsive gold deposited plasmonic polylactic-co-glycolic acid nanoshells (AuPLGA NS, tuned at 808 nm) and NIR dye (IR780) to examine their repetitive and localized therapeutic efficacy as well resulting side effects to nearby healthy cells. It is observed that AuPLGA NS decorated graphene oxide nanosheets (GO-AuPLGA) and IR780 loaded graphene oxide nanosheets (GO-IR780) are capable in standalone complete photothermal ablation of cancer cells within 4 min. of 808 nm NIR laser irradiation and also without the aid of any anticancer drugs. However, GO-AuPLGA having the potential for repetitive photothermal treatment of a big tumor, ablate the cancer cells in highly localized fashion, without having side effects on neighboring healthy cells.

Albumin-assisted exfoliated ultrathin rhenium disulfide nanosheets as a tumor targeting and dual-stimuli-responsive drug delivery system for a combination chemo-photothermal treatment

Herein, we prepared an ultrathin rhenium disulfide nanosheet (utReS2) through the bovine serum albumin (BSA)-assisted ultrasonic exfoliation method, which showed great biocompatibility and high near-infrared (NIR) absorbance. The large surface specific area and the presence of BSA facilitate a high loading ratio and modification of multifunctional molecules. The low solubility anti-cancer drug resveratrol (RSV) was loaded onto the utReS2 surface to form a biocompatible nanocomposite (utReS2@RSV). A targeting molecule, folic acid (FA), was then conjugated to the BSA molecule of utReS2@RSV, resulting in utReS2@RSV-FA. The utReS2@RSV-FA exhibited a photothermal effect under an 808 nm laser irradiation. At pH = 6.5, about 16.5% of the RSV molecules was released from utReS2@RSV-FA over 24 h, while the value reached 55.3% after six cycles of NIR irradiation (5 min, 1 W cm-2). In vitro experiments of utReS2@RSV-FA showed that it had low cytotoxicity and an excellent HepG2 cells targeting effect. Upon pH/temperature dual-stimuli, utReS2@RSV-FA showed an enhanced cytotoxic effect. In vivo experiments of utReS2@RSV-FA intravenously injected into tumor-bearing mice showed that at 24 h post-injection, it could actively target and was largely accumulated in tumor tissue. When the injection was further accompanied by three cycles of NIR irradiation for 5 min, once a day, the tumor was efficiently suppressed, without relapse after 30 days. These findings demonstrate that utReS2@RSV-FA has a remarkable targeting ability while providing a dual-stimuli-responsive drug delivery system, and could effectively be used in a combination chemo-photothermal cancer treatment.