Interaction between polydopamine-based IONPs and human serum albumin (HSA): a spectroscopic analysis with cytotoxicity impact

Iron oxide nanoparticles (IONPs) have been extensively explored in biomedicine, bio-sensing, hyperthermia, and drug/gene delivery, attributed to their versatile and tunable properties. However, owing to its numerous applications, the functionalization of IONPs with appropriate materials is in demand. To achieve optimal functionalization of IONPs, polydopamine (PDA) was utilized due to its ability to provide a superior functionalized surface, near-infrared light absorption, and adhesive nature to customize desired functionalized IONPs. This notion of involving PDA led to the successful synthesis of magnetite-PDA nanoparticles, where PDA is surface-coated on magnetite (Fe3O4@PDA). The Fe3O4@PDA nanoparticles were characterized using techniques like TEM, FESEM, PXRD, XPS, VSM, and FTIR, suggesting PDA's successful attachment with magnetite crystal structure retention. Human serum albumin (HSA), the predominant protein in blood plasma, interacts with the delivered nanoparticles. Therefore, we have employed various spectroscopic techniques, along with cytotoxicity, to inspect the effect of Fe3O4@PDA NPs on the stability and structure of HSA. The structural alterations were examined using circular dichroism (CD) and synchronous fluorescence spectroscopy (SFS). It has been observed that there are no structural perturbations in the secondary structure of the HSA protein after interaction with Fe3O4@PDA. Studies using steady-state fluorescence revealed that the inherent fluorescence intensities of HSA were suppressed after interaction with Fe3O4@PDA. In addition, temperature-dependent fluorescence measurements suggested that the type of quenching consists of both static and dynamic quenching simultaneously. A cytotoxicity study in Drosophila melanogaster larvae revealed no cytotoxic effects but did show a minor genotoxic effect only at higher concentrations.

Aptamer-functionalized and silver-coated polydopamine-copper hybrid nanoflower adsorbent embedded with magnetic nanoparticles for efficient mercury removal

Mercury (Hg) emissions are increasing annually owing to rapid global industrialization. Hg poisoning can severely affect the human body owing to its persistence and bioaccumulation. In this study, hybrid nanoflowers (NFs) were synthesized by promoting the formation of primary copper-phosphate crystals coordinated with polydopamine (PDA) and Fe₃O₄ magnetic nanoparticles (MNPs), followed by coating with silver nanoparticles on the surface of the NFs (Ag-MNP-PDA-Cu NFs). The results suggest that the hierarchical structure of the NFs enabled a large surface area with nanosized pores, which were exploited for Hg adsorption. The adsorbed Hg ions could be further eliminated from the solution based on the magnetic characteristics of the NFs. Additionally, hybrid NFs functionalized with Hg²⁺-binding aptamers (Apt-Ag-MNP-PDA-Cu NFs) were prepared based on the silver-sulfur interactions between the Ag-MNP-PDA-Cu NFs and thiol-modified aptamers. The performance of both adsorbents demonstrated that the immobilization of Hg²⁺-binding aptamers significantly improved the elimination of Hg from solution. The Hg²⁺ adsorption isotherm of the Apt-Ag-MNP-PDA-Cu NFs followed the Dubinin-Radushkevich model, with a maximum adsorption capacity of 1073.19 mg/g. The Apt-Ag-MNP-PDA-Cu NFs adsorbed greater amounts of Hg²⁺ than the non-functionalized NFs at the same concentrations, which confirmed that the functionalization of Hg²⁺-binding aptamers on the NFs improved the Hg²⁺ removal performance. The results suggest that Apt-Ag-MNP-PDA-Cu NFs could serve as an efficient Hg-removing adsorbent, possibly by providing binding sites for the formation of T-Hg²⁺-T complexes.

Enhanced activity for reduction of 4-nitrophenol of Ni/single-walled carbon nanotube prepared by super-growth method

In this study, we synthesised the Ni/single-walled carbon nanotube prepared by the super-growth method (SG-SWCNTs). In this approach, the Ni nanoparticles were immobilised by an impregnation method using the SG-SWCNTs with high specific surface areas (1144 m²g^-1). The scanning electron microscopy images confirmed that the SG-SWCNTs exhibit the fibriform morphology corresponding to the carbon nanotubes. In addition, component analysis of the obtained samples clarified that the Ni nanoparticles were immobilised on the surface of the SG-SWCNTs. Next, we evaluated the activity for the reduction of 4-nitoropenol in the presence of the Ni/SG-SWCNTs. Additionally, the Ni/graphene, which was obtained by the same synthetic method, was utilised in this reaction. The rate of reaction activity of the Ni/SG-SWCNTs finished faster than that of the Ni/GPs. From this result, the pseudo-first-order kinetic rate constantkfor the Ni/SG-SWCNTs and the Ni/GPs was calculated respectively at 0.083 and 0.070 min^-1, indicating that the Ni/SG-SWCNTs exhibits higher activity.

Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Core-Shell Nanowires

We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C₃N₅ is a low-band-gap (E_g = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C₃N₅ nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C₃N₅ heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm² V^-1 s^-1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm² V^-1 s^-1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J-V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C₃N₅ in CdS-MHP. C₃N₅, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core-shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.

Facile synthesis of an aggregation-induced emission (AIE) active imidazoles for sensitive detection of trifluralin

A novel imidazoles fluorescent probe (2) was synthesized from vanillin, o-phenylenediamine, and N,N-diphenylcarbamyl chloride. Its structure was characterized by fluorescence spectra, UV-Vis spectra, ¹H NMR, ¹³C NMR, and high-resolution mass spectrometry (HRMS). Moreover, its aggregation-induced emission (AIE) feature was investigated in THF/MeOH solution. Furthermore, the fluorescence quenching experimental results suggest that compound 2 is the potential fluorescent probe of small organic molecules showing high selectivity and sensitivity for nitroaromatic compounds. In addition, the probe could be applied in the determination of trifluralin with fast response and stability. The fluorescence response of the probe exhibited a good linear correlation with the concentration of trifluralin ranging from 10 to 100 μM, and the limit of detection (LOD) was as low as 5.066 μM. Finally, the probe was successfully utilized to determine the amount of trifluralin in real samples, and the recoveries were 91.1% to 111.2%, indicating the applicability and reliability of the probe.

In situ decoration of Au NPs over polydopamine encapsulated GO/Fe3O4 nanoparticles as a recyclable nanocatalyst for the reduction of nitroarenes

A new and efficient catalyst has been designed and prepared via in situ immobilization of Au NPs fabricated polydopamine (PDA)-shelled Fe3O4 nanoparticle anchored over graphene oxide (GO) (GO/Fe3O4@PDA/Au). This novel, architecturally interesting magnetic nanocomposite was fully characterized using different analytical techniques such as Field Emission Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy, elemental mapping, Transmission Electron Microscopy, Fourier Transformed Infrared Spectroscopy, X-ray Diffraction and Inductively Coupled Plasma-Atomic Electron Spectroscopy. Catalytic activity of this material was successfully explored in the reduction of nitroarenes to their corresponding substituted anilines, using NaBH4 as reducing agent at ambient conditions. The most significant merits for this protocol were smooth and clean catalysis at room temperature with excellent productivity, sustainable conditions, ease of separation of catalyst from the reaction mixture by using a magnetic bar and most importantly reusability of the catalyst at least 8 times without any pre-activation, minimum loss of activity and considerable leaching.

Polydopamine Functionalized Graphene Oxide as Membrane Nanofiller: Spectral and Structural Studies

High-degree functionalization of graphene oxide (GO) nanoparticles (NPs) using polydopamine (PDA) was conducted to produce polydopamine functionalized graphene oxide nanoparticles (GO-PDA NPs). Aiming to explore their potential use as nanofiller in membrane separation processes, the spectral and structural properties of GO-PDA NPs were comprehensively analyzed. GO NPs were first prepared by the oxidation of graphite via a modified Hummers method. The obtained GO NPs were then functionalized with PDA using a GO:PDA ratio of 1:2 to obtain highly aminated GO NPs. The structural change was evaluated using XRD, FTIR-UATR, Raman spectroscopy, SEM and TEM. Several bands have emerged in the FTIR spectra of GO-PDA attributed to the amine groups of PDA confirming the high functionalization degree of GO NPs. Raman spectra and XRD patterns showed different crystalline structures and defects and higher interlayer spacing of GO-PDA. The change in elemental compositions was confirmed by XPS and CHNSO elemental analysis and showed an emerging N 1s core-level in the GO-PDA survey spectra corresponding to the amine groups of PDA. GO-PDA NPs showed better dispersibility in polar and nonpolar solvents expanding their potential utilization for different purposes. Furthermore, GO and GO-PDA-coated membranes were prepared via pressure-assisted self-assembly technique (PAS) using low concentrations of NPs (1 wt. %). Contact angle measurements showed excellent hydrophilic properties of GO-PDA with an average contact angle of (27.8°).

Size Preferences Uptake of Glycosilica Nanoparticles to MDA-MB-231 Cell

Recently, studies on the development and investigation of carbohydrate-functionalized silica nanoparticles (NPs) and their biomedicine applications such as cell-specific targeting and bioimaging has been carried out extensively. Since the number of breast cancer patients has been growing in recent years, potential NPs were being studied in this project for targeting breast cancer cells. Mannose receptors can be found on the surface of MDA-MB-231, which is a kind of human breast cancer cell line. Therefore, we decorated a cyanine 3 fluorescent dye (Cy3) and mannosides on the surface of silica NPs for the purpose of imaging and targeting. Galactoside was also introduced onto the surface of silica NPs acting as a control sample. Various sizes of silica NPs were synthesized by using different amounts of ammonium to investigate the effect of the size of NPs on the cellular uptake rate. The physical properties of these NPs were characterized by scanning electron microscope, dynamic light scattering, and their zeta potential. Cellular experiments demonstrated that mannoside-modified NPs can be uptaken by MDA-MB-231. From the experiment, we found out that the best cellular uptake rate of nanoparticle size is about 250 nm. The MTT assay showed that Man@Cy3SiO₂NPs are not cytotoxic, indicating they may have the potential for biomedical applications.

Au-Fe3O4 decorated polydopamine hollow nanoparticles as high performance catalysts with magnetic responsive properties

We demonstrated a simple approach for fabricating Au-Fe₃O₄/PDA hollow nanoparticles as high-performance catalysts for water purification. The polydopamine (PDA) shell was in situ formed on the silica surface from self-polymerization, which acts as a medium support for coupling with metal ions (for Fe₃O₄ nanoparticle deposition) as well as a reducing agent and stabilizer for Au nanoparticle reduction and deposition. A step of simultaneous Fe₃O₄ nanoparticle deposition and silica core removal under alkaline conditions is first introduced in this study. This process significantly simplifies previous strategies which typically require the use of poisonous agents such as hydrogen fluoride or additional complicated post-treatment steps. Under optimized conditions, the Au-Fe₃O₄/PDA hollow nanoparticles show a high saturation magnetization of 18.8 emu g^-1 and an excellent catalytic performance for the rapid reduction of p-nitrophenol with the reaction kinetic constant of 0.34 min^-1. This catalyst can be easily recovered using a permanent magnet and recycled eight times with a high catalytic cycle stability. The strategy presented in this work provides a facile and versatile approach towards designing complicated Au-Fe₃O₄/PDA hollow nanostructures, which might have great potential for many applications within biological, energy, and environmental technologies.

Facile green synthesis of Ag-Cu decorated ZnO nanocomposite for effective removal of toxic organic compounds and an efficient detection of nitrite ions

A facile and eco-friendly green synthesis of silver-copper@zinc oxide (Ag-Cu@ZnO) nanocomposite using Acacia caesia flower extract and their application on catalytic reduction of toxic compounds and electrochemical sensing of nitrite ions are reported. The phytochemicals present in the extract were utilized for the Ag-Cu metal nanoparticles synthesis and also enhanced the binding capability between ZnO and Ag-Cu NPs. The synthesized nanocomposites were characterized by XRD, UV-Vis spectroscopy, Raman spectra, FTIR, SEM, TEM, EDX, XPS and ICP-AES for the formation of Ag-Cu NPs on ZnO. The Ag-Cu@ZnO nanocomposite showed better catalytic efficiency as compared to monometallic nanoparticles for 4-nitrophenol to 4-aminophenol conversion and Rhodamine B and Congo red dye degradation with 99% efficiency up to four cycles. The Ag-Cu@ZnO modified GC electrode showed enhanced catalytic activity towards nitrite oxidation, and it exhibited better performance compared to the other nanocomposites. An appreciable detection limit (17 μM) was achieved with excellent sensitivity for nitrite detection. The sensor was highly selective even in a many-fold higher concentration of co-existing interfering compounds. The good catalytic and electrochemical sensing is mainly ascribed due to the synergistic effect of Ag-Cu on the ZnO in the Ag-Cu@ZnO nanocomposite materials.

A redox interaction-engaged strategy for multicomponent nanomaterials

The review article focuses on the redox interaction-engaged strategy that offers a powerful way to construct multicomponent nanomaterials with precisely-controlled size, shape, composition and hybridization of nanostructures.

Versatile Polydopamine Platforms: Synthesis and Promising Applications for Surface Modification and Advanced Nanomedicine

As a mussel-inspired material, polydopamine (PDA), possesses many properties, such as a simple preparation process, good biocompatibility, strong adhesive property, easy functionalization, outstanding photothermal conversion efficiency, and strong quenching effect. PDA has attracted increasingly considerable attention because it provides a simple and versatile approach to functionalize material surfaces for obtaining a variety of multifunctional nanomaterials. In this review, recent significant research developments of PDA including its synthesis and polymerization mechanism, physicochemical properties, different nano/microstructures, and diverse applications are summarized and discussed. For the sections of its applications in surface modification and biomedicine, we mainly highlight the achievements in the past few years (2016-2019). The remaining challenges and future perspectives of PDA-based nanoplatforms are discussed rationally at the end. This timely and overall review should be desirable for a wide range of scientists and facilitate further development of surface coating methods and the production of PDA-based materials.

Flavin Conjugated Polydopamine Nanoparticles Displaying Light-Driven Monooxygenase Activity

A hybrid of flavin and polydopamine (PDA) has been explored as a photocatalyst, drawing inspiration from natural flavoenzymes. Light-driven monoxygenase activity has been demonstrated through the oxidation of indole under blue light irradiation in ambient conditions, to afford indigo and indirubin dyes. Compared to riboflavin, a flavin-polydopamine hybrid is shown to be more resistant to photobleaching and more selective toward dye production. In addition, it has been demonstrated that it can be recycled from the solution and used for up to four cycles without a marked loss of activity, which is a significant improvement compared to other heterogenous flavin catalysts. The mechanism of action has been explored, indicating that the PDA shell plays an important role in the stabilization of the intermediate flavin-peroxy species, an active component of the catalytic system rather than acting only as a passive nanocarrier of active centers.

Highly biocompatible jujube polysaccharide-stabilized palladium nanoparticles with excellent catalytic performance

Jujube polysaccharide-stabilized palladium nanoparticles provide active sites for efficient catalysis of 4-nitrophenol to 4-aminophenol.

Green controllable synthesis of Au–Ag alloy nanoparticles using Chinese wolfberry fruit extract and their tunable photocatalytic activity

Au–Ag alloy nanoparticles, synthesized using wolfberry fruit extract, showed linearly tunable photocatalytic activity through changing alloy composition and synthesis parameters.

Gold decoration of silica by decomposition of aqueous gold(iii) hydroxide at low temperatures

One-step/one-pot gold decoration of silica driven by gold(iii) hydroxide precipitation/decomposition in wet media avoiding calcination and functionalization.