Recent Progress of Droplet Microfluidic Emulsification Based Synthesis of Functional Microparticles

The remarkable control function over the functional material formation process enabled by droplet microfluidic emulsification approaches can lead to the efficient and one-step encapsulation of active substances in microparticles, with the microparticle characteristics well regulated. In comparison to the conventional fabrication methods, droplet microfluidic technology can not only construct microparticles with various shapes, but also provide excellent templates, which enrich and expand the application fields of microparticles. For instance, intersection with disciplines in pharmacy, life sciences, and others, modifying the structure of microspheres and appending functional materials can be completed in the preparation of microparticles. The as-prepared polymer particles have great potential in a wide range of applications for chemical analysis, heavy metal adsorption, and detection. This review systematically introduces the devices and basic principles of particle preparation using droplet microfluidic technology and discusses the research of functional microparticle formation with high monodispersity, involving a plethora of types including spherical, nonspherical, and Janus type, as well as core-shell, hole-shell, and controllable multicompartment particles. Moreover, this review paper also exhibits a critical analysis of the current status and existing challenges, and outlook of the future development in the emerging fields has been discussed.

Poly(ionic liquid) nanovesicles via polymerization induced self-assembly and their stabilization of Cu nanoparticles for tailored CO2 electroreduction

Herein, we report a straightforward, scalable synthetic route towards poly(ionic liquid) (PIL) homopolymer nanovesicles (NVs) with a tunable particle size of 50 to 120 nm and a shell thickness of 15 to 60 nm via one-step free radical polymerization induced self-assembly. By increasing monomer concentration for polymerization, their nanoscopic morphology can evolve from hollow NVs to dense spheres, and finally to directional worms, in which a multilamellar packing of PIL chains occurred in all samples. The transformation mechanism of NVs' internal morphology is studied in detail by coarse-grained simulations, revealing a correlation between the PIL chain length and the shell thickness of NVs. To explore their potential applications, PIL NVs with varied shell thickness are in situ functionalized with ultra-small (1 ∼ 3 nm in size) copper nanoparticles (CuNPs) and employed as electrocatalysts for CO₂ electroreduction. The composite electrocatalysts exhibit a 2.5-fold enhancement in selectivity towards C₁ products (e.g., CH₄), compared to the pristine CuNPs. This enhancement is attributed to the strong electronic interactions between the CuNPs and the surface functionalities of PIL NVs. This study casts new aspects on using nanostructured PILs as new electrocatalyst supports in CO₂ conversion to C₁ products.

Layer-By-Layer Synthesis of the pH-Responsive Hollow Microcapsule and Investigation of Its Drug Delivery and Anticancer Properties

Multilayered pH-responsive hollow microcapsules with non-toxicity and biological specificity advantages were prepared from two kinds of polymers i.e., chitosan (CH) and poly (ethylene glycol dimethacrylate-co-methacrylic acid) (PE) via layer-by-layer (LbL) method, which is followed by subsequent removal of silica core. The hollow nature of obtained spherical microcapsules was found by transmission electron microscopy (TEM). The microcapsules were prepared as gemcitabine (GM) and curcumin (CR) carriers. The drugs have been loaded within the microcapsules during or after the synthetic procedure. Although acceptable loading efficiencies (LE) were obtained in both methods, the amount of drug loaded during the synthesis method is relatively higher. Values above 78% and 87%, for releasing efficiency (RE%) and encapsulation efficiency (EE%), respectively, demonstrate the high potential of the prepared microcapsules for drug delivery. In addition, the difference between the amount of drug released in acidic and neutral pH indicates the pH-responsivity of the prepared microcapsules. Moreover, the dose-dependent high cytotoxicity effect of the prepared microcapsules was observed on the HCT116 colorectal carcinoma cells.

Structure of swollen hollow polyelectrolyte nanogels with inhomogeneous cross-link distribution

HYPOTHESIS

Recently, it has become possible to synthesize hollow polyelectrolyte nano- and microgels. The shell permeability can be controlled by external stimuli, while the cavity can serve as a storage place for guest molecules. However, there is a lack of a detailed understanding at the molecular level regarding the role of the network topology, inhomogeneities of the distribution of cross-links, and the impact of the electrostatics on the structural response of hollow microgel to external stimuli. To bridge these gaps, molecular dynamics (MD) of computer simulations are used.

EXPERIMENTS

Here, we propose a fresh methodology to create realistic hollow microgel particles in silico. The technique involves a gradual change in the average local length of subchains depending on the distance to the center of mass of the microgel particles resulting in the microgels with a non-uniform distribution of cross-linking species. In particular, a series of microgels with (i) a highly cross-linked inner part of the shell and gradually decreased cross-linker concentration towards the periphery, (ii) microgels with loosely cross-linked inner and outer parts, as well as (iii) microgels with a more-or-less homogeneous structure, have been created and validated. Counterions and salt ions are taken into account explicitly, and electrostatic interactions are described by the Coulomb potential.

FINDINGS

Our studies reveal a strong dependence of the microgel swelling response on the network topology. Simple redistribution of cross-links plays a significant role in the structure of the microgels, including cavity size, microgel size, fuzziness, and extension of the inner and outer parts of the microgels. Our results indicate the possibilities of qualitative justification of the structure of the hollow microgels in the experiments by measuring the relative change in the size of the sacrificial core to the size of the cavity and by estimation of a power law function, [Formula: see text] , of the hydrodynamic radius of the hollow microgels as a function of added salt concentration.

Controlled synthesis of solid-shelled non-spherical and faceted microbubbles

The ability to control the shape of hollow particles (e.g., capsules or bubbles) holds great promise for enhancing the encapsulation efficiency and mechanical/optical properties. However, conventional preparation methods suffer from a low yield, difficulty in controlling the shape, and a tedious production process, limiting their widespread application. Here, we present a method for fabricating polyhedral graphene oxide (GO)-shelled microbubbles with sharp edges and vertices, which is based on the microfluidic generation of spherical compound bubbles followed by shell deformation. Sphere-to-polytope deformation is a result of the shell instability due to gradual outward gas transport, which is dictated by Laplace pressure across the shell. The shape-variant behaviours of the bubbles can also be attributed to the compositional heterogeneity of the shells. In particular, the high degree of control of microfluidic systems enables the formation of non-spherical bubbles with various shapes; the structural motifs of the bubbles are easily controlled by varying the size and thickness of the mid-shell in compound bubbles, ranging from tetrahedra to octahedra. The strategy presented in this study provides a new route for fabricating 3D structured solid bubbles, which is particularly advantageous for the development of high-performance mechanical or thermal material applications.

Nanomotor-Derived Porous Biomedical Particles from Droplet Microfluidics

Porous particles have found widespread applications in therapeutic diagnosis, drug delivery, and tissue engineering due to their typical properties of large surface area, extensive loading capacity, and hierarchical microstructures. Attempts in this aspect are focusing on the development of effective methods to generate functional porous particles. Herein, a simple droplet microfluidics for continuously and directly generating porous particles by introducing bubble-propelled nanomotors into the system is presented. As the nanomotors can continuously generate gas bubbles in the unsolidified droplet templates, the desirable porous microparticles can be obtained after droplet polymerization. It is demonstrated that the generation process is highly controlled and the resultant microparticles show excellent porosity and monodispersity. In addition, the obtained porous microparticles can serve as microcarriers for 3D cell culture, because of their characteristic porous structures and favorable biocompatibility. Moreover, owing to the existence of oxygen in these microparticles, they can be used to improve the healing effects of wounds in the type I diabetes rat models. These remarkable features of the generation strategy and the porous microparticles point to their potential values in various biomedical fields.

Preparation, characterization, evaluation and mechanistic study of organic polymer nano-photocatalysts for solar fuel production

This review provides the guidelines and knowledge gained so far on current strategies used to prepare, optimize and investigate polymer nanoparticles for fuel production, highlighting the future directions of polymer nano-photocatalyst development.

Hollow porous molecularly imprinted polymers as emerging adsorbents

Hollow porous molecularly imprinted polymers (HPMIPs) are identified as promising adsorbents with many advantageous properties (e.g., large number of imprinted cavities, highly accessible binding sites, controllable pore structure, and fast mass transfer). Because of such properties, HPMIPs can exhibit improved binding capacity and kinetics to make analyte molecules readily interact with a greater number of recognition sites on the imprinted shell. This review highlights the synthesis and utility of HPMIPs as adsorbents to cover diverse targets of interest (e.g., endocrine disrupting chemicals, pharmaceuticals, pesticides, and heavy metal ions). The overall potential of HPMIPs is thus discussed in the context of analytical chemistry with particular focus on the efficient extraction of trace-level targets from complex matrices.

Preparation of Salt-Responsive Hollow Hydrophilic Polymer Particles by Inverse Suspension Polymerization

Hydrophilic polymer particles with a hollow structure have potential applications such as carriers for hydrophilic drugs. However, there are few reports on preparation and morphology control of such particles via a simple method. In this study, hollow hydrophilic polymer particles were prepared by inverse suspension polymerization for water droplets containing 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) anions, 1-vinylimidazole (VIm) cations, oligo(ethylene glycol) diacrylate (OEGDA), dextran, and an initiator via the self-assembling phase-separated polymer (SaPSeP) method developed in our lab. The inner morphology of the particle could be controlled (as single- or multi-hollow structures) by changing the concentrations of the OEGDA and the dextran. The obtained hollow particles could encapsulate a hydrophilic fluorescent substance in their hollow region when the substance was added to the primary droplets before polymerization. In addition, the poly(AMPS-co-VIm-co-OEGDA) shell of the particles exhibited an ionic cross-linked structure, which could be stimulated by salt. The poly(AMPS-co-VIm-co-OEGDA) hollow particles with the encapsulated substance released the substance when salt was added to the dispersion. These results indicated that the applicability of the SaPSeP method can be broadened for morphology control of the hydrophilic polymer particles encapsulating water-soluble materials.

Polymeric nanocapsules: A review on design and production methods for pharmaceutical purpose

Polymeric nanocapsules have extensive application potential in medical, biological, and pharmaceutical fields, and, therefore, much research has been dedicated to their production. Indeed, production protocols and the materials used are decisive for obtaining the desired nanocapsules characteristics and biological performance. In addition to that, several technological strategies have been developed in the last decade to improve processing techniques and form more valuable nanocapsules. This review provides a guide to current methods for developing polymeric nanocapsules, reporting aspects to be considered when choosing appropriate materials, and discussing different ways to produce nanocapsules for superior performances.

Boxes fabricated from plate-stabilized liquid marbles

Polyhedral liquid marbles were fabricated using hydrophobic polymer plates in the shape of a circle, a heart and a star as a stabilizer and water as an inner liquid phase. Boxes could be fabricated by the evaporation of the inner water from the liquid marbles. The fabrication efficiency and stability of these boxes as a function of the plate shape were investigated. Functional materials such as polymers and colloidal particles were successfully introduced into the boxes.

Thermally-induced hyperbranching of bromine-containing polyesters by insertion of in situ generated chain-end carbenes

Hyperbranched, biodegradable PCL-based polymers are obtained through a random but invasive migration of an in situ generated carbene end group which is unmasked via the thermolysis of its precursor diazirine moiety. These hyperbranched cores are used as macroinitiators for 'grafting-from' polymerisation using controlled radical polymerisation to achieve amphiphilic copolymers which can subsequently be self-assembled into spherical core-shell micelles.

Magnetic polymer bowl for enhanced catalytic activity and recyclability

This work introduces the fabrication of a magnetic polymer bowl for enhanced catalytic activity and recyclability, which involves the synthesis of silica-coated Fe3O4 magnetic clusters, seeded dispersion polymerization using the magnetic clusters, and transformation into a bowl-like structure via a phase separation route. The additional treatment with tannic acid (TA) on the bowls allows the in situ formation of silver nanoparticles (AgNPs) on their surfaces. The openness and larger surface area of the bowls, as compared with those of other structured particles, such as spheres and flowers, enable a considerably higher immobilization of AgNPs, thus leading to an excellent catalytic reduction for 4-nitrophenol (4-NP), methylene blue (MB), and rhodamine B. Furthermore, the strong magnetic response originating from the magnetic clusters inside the bowls endows a good magnetic recovery and an excellent reusability for the repeated reduction of the organic dyes without loss of catalytic activity.

Iron oxide coated hollow poly(methylmethacrylate) as an efficient adsorption media for removal of arsenic from water

Adsorption of arsenic onto iron-based adsorption media has been established as a convenient method for the removal of arsenic from contaminated water. The study describes the efficiency of iron oxide coated hollow poly(methyl methacrylate) microspheres (FHM) as an adsorptive media for the removal of arsenic from water. Hollow poly(methyl methacrylate) microspheres (HPMM) were synthesized by solvent evaporation and an electroless plating technique and the surface of the polymer was coated with iron oxide (FeO) particles. Structural characterization was performed using Optical Microscopy (OM), Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), Energy Dispersive X-ray diffraction (EDAX), and Thermogravimetric Analysis (TGA). A study on the effect of the varying initial concentration of arsenic ions on percentage removal was performed in the laboratory and the adsorption capacity of the adsorbent was measured. Adsorption isotherm studies were carried out to evaluate the adsorption efficiency of FHM in removing arsenic from contaminated water. The Langmuir and Freundlich isotherm models were used to analyze the equilibrium experimental data. The isotherm study revealed that Langmuir adsorption data are well fitted and the maximum adsorption capacity of FHM in removing arsenic is 10.031 mg g-1. This high arsenic uptake capability combined with a low density of FHM makes it a potential material for arsenic removal particularly during the fabrication of lightweight portable water purification devices.

Synthesis and solvent-controlled self-assembly of diketopiperazine-based polyamides from aspartame

An aspartame-based AB-type diketopiperazine monomer, cyclo(l-aspartyl-4-amino-l-phenylalanyl) (ADKP), was synthesized and subsequently utilized in the polycondensation of homo-polyamides with high molecular weights. By using various amino acids, dicarboxylic acids, and diamines, random DKP-based copolymers were also synthesized. The self-assembly properties of ADKP and poly(cyclo(l-aspartyl-4-amino-l-phenylalanyl)) (PA1) were studied via the solvent displacement method. Notably, PA1 self-assembled into particles with various morphologies in different solvent systems, such as irregular networks, ellipsoids, and hollow particles. The morphological transformation was also confirmed by dropping acetone and toluene onto the PA1 particles. Furthermore, infrared spectra and Hansen solubility parameters of PA1 and different solvents revealed the particle formation mechanism, which provided more insights into the relationship between the morphology and strength of the hydrogen bonding of each solvent.

Diketopiperazine-based polyamides have been synthesized from aspartame, and could self-assemble into particles with various morphologies in different solvents.

Aluminum doped zinc oxide deposited by atomic layer deposition and its applications to micro/nano devices

This work reports investigation on the deposition and evaluation of an aluminum-doped zinc oxide (AZO) thin film and its novel applications to micro- and nano-devices. The AZO thin film is deposited successfully by atomic layer deposition (ALD). 50 nm-thick AZO film with high uniformity is checked by scanning electron microscopy. The element composition of the deposited film with various aluminum dopant concentration is analyzed by energy-dispersive X-ray spectroscopy. In addition, a polycrystalline feature of the deposited film is confirmed by selected area electron diffraction and high-resolution transmission electron microscopy. The lowest sheet resistance of the deposited AZO film is found at 0.7 kΩ/□ with the aluminum dopant concentration at 5 at.%. A novel method employed the ALD in combination with the sacrificial silicon structures is proposed which opens the way to create the ultra-high aspect ratio AZO structures. Moreover, based on this finding, three kinds of micro- and nano-devices employing the deposited AZO thin film have been proposed and demonstrated. Firstly, nanowalled micro-hollows with an aspect ratio of 300 and a height of 15 µm are successfully produced . Secondly, micro- and nano-fluidics, including a hollow fluidic channel with a nanowall structure as a resonator and a fluidic capillary window as an optical modulator is proposed and demonstrated. Lastly, nanomechanical resonators consisting of a bridged nanobeam structure and a vertical nanomechanical capacitive resonator are fabricated and evaluated.

Silica-Based Nanoparticles as Drug Delivery Vehicles for Prostate Cancer Treatment

Prostate cancer (PCa) is one of the most commonly diagnosed cancers and is the fifth common cause of cancer-related mortality in men. Current methods for PCa treatment are insufficient owing to the challenges related to the non-specificity, instability and side effects caused by the drugs and therapy agents. These drawbacks can be mitigated by the design of a suitable drug delivery system that can ensure targeted delivery and minimise side effects. Silica based nanoparticles (SBNPs) have emerged as one of the most versatile materials for drug delivery due to their tunable porosities, high surface area and tremendous capacity to load various sizes and chemistry of drugs. This review gives a brief overview of the diagnosis and current treatment strategies for PCa outlining their existing challenges. It critically analyzes the design, development and application of pure, modified and hybrid SBNPs based drug delivery systems in the treatment of PCa, their advantages and limitations.

Preparation of Cellulose Particles with a Hollow Structure

In this study, we report the preparation of hollow cellulose particles via a solvent-releasing method with the ionic liquid 1-ethyl-3-methylimidazolium acetate ([Emim]Ac). A dispersion comprising [Emim]Ac droplets with dissolved cellulose and a hexane medium containing a stabilizer was poured into a large amount of acetone (precipitant), resulting in the precipitation of cellulose and the formation of solid cellulose particles with a hollow structure. We found that the formation of the hollow structure resulted from the equilibrium phase separation. Porous structures were also obtained using ethanol or t-butanol as a precipitant, where cellulose immediately precipitated (i.e., exhibited non-equilibrium phase separation). In the case where acetone was used as the precipitant, the diffusion rate of [Emim]Ac from the droplets into the precipitant was relatively low; that is, the precipitation of cellulose was delayed, which allowed the cellulose to be phase-separated into a thermodynamically stable structure (equilibrium phase separation), resulting in the formation of the hollow structure.

Design and One-Pot Synthesis of Capsid-like Gold Colloids with Tunable Surface Roughness and Their Enhanced Sensing and Catalytic Performances

Viral capsid-like particles tiled with mosaic patches have attracted great attention as they imitate nature's design to achieve advanced material properties and functions. Here, we develop a facile one-pot soft-template method to synthesize biomimetic gold capsid-like colloids with tunable particle size and surface roughness. Uniform submicron-to-micron-sized hollow gold colloidal particles are successfully achieved by using tannic acids as soft templates and reducing agents, which first self-assemble into spherical complex templates before the reduction of Au³⁺ ions via their surface hydroxyl groups. The surface roughness, the size, and the total number of the patches of the prepared gold particles are further tuned, utilizing a mechanism that offers morphology control by varying the number of surface hydroxyl groups participating in the reduction reactions. Among different capsid-like gold colloids, those possessing a rough surface display superior catalytic properties and show promising results as surface-enhanced Raman spectroscopy (SERS) solid substrates for detecting small organic molecules and biomimetic enzymes in a liquid phase for sensing biomolecules in real samples. These capsid-like gold colloids are also expected to find practical applications in delivery systems, electronics, and optics. We believe that our strategy of imitating nature's design of capsid-like structures should also be used in the design and fabrication of other functional colloidal particles.

Hollow Silica Particles: Recent Progress and Future Perspectives

Hollow silica particles (or mesoporous hollow silica particles) are sought after for applications across several fields, including drug delivery, battery anodes, catalysis, thermal insulation, and functional coatings. Significant progress has been made in hollow silica particle synthesis and several new methods are being explored to use these particles in real-world applications. This review article presents a brief and critical discussion of synthesis strategies, characterization techniques, and current and possible future applications of these particles.

Graphitic Carbon Nitride Stabilizers Meet Microfluidics: From Stable Emulsions to Photoinduced Synthesis of Hollow Polymer Spheres

Graphitic carbon nitride (g-CN) has been utilized as a heterogeneous catalyst, but is usually not very well dispersible. The amphiphilic character of g-CN can be altered by surface modifications of g-CN nanopowders. Introducing hydrophilicity or hydrophobicity is a promising avenue for producing advanced emulsion systems. In this study, a special surface-modified g-CN is used to form stable Pickering emulsions. Using a PDMS-based microfluidic device designed for stable production of both single and double emulsions, it is shown that surface-modified g-CNs allow the manufacture of unconventionally stable and precise Pickering emulsions. Shell thickness of the double emulsions is varied to emphasize the robustness of the device and also to demonstrate the extraordinary stabilization brought by the surface-modified carbon nitride used in this study. Due to the electrostatic stabilization also in the oil phase, double emulsions are centered. Finally, when produced from polymerizable styrene, hollow polymer microparticles are formed with precise and tunable sizes, where g-CN is utilized as the only stabilizer and photoinitiator.

Use of Multi-Hollow Polyester Particles as Opacifying Agent for Injection-Molded Polyethylene

Titanium dioxide is considered the most efficient white pigment for opacification of thermoplastics. However, its high cost, combined with strong price oscillations due to production bottlenecks, has been driving the industry towards alternatives that might allow reducing the titanium dioxide content, while maintaining the product’s opacity. A strategy commonly used in waterborne paints consists in adding hollow polymer particles to the formulation, therefore achieving opacification due to light refraction at the air/polymer interface. In the current work, we show preliminary results that indicate that a similar strategy can be followed for thermoplastics opacification, as long as thermoset particles are used, in order to ensure preservation of the hollow geometry during melt-processing. Multi-vesiculated crosslinked styrene–polyester particles, produced by a single-step double emulsion process, are used. Evidence of synergic interaction between the multi-hollow particles and titanium dioxide has been found.

Hybrid hollow silica particles: synthesis and comparison of properties with pristine particles

In the past decade, interest in hollow silica particles has grown tremendously because of their applications in diverse fields such as thermal insulation, drug delivery, battery cathodes, catalysis, and functional coatings. Herein, we demonstrate a strategy to synthesize hybrid hollow silica particles having shells made of either polymer-silica or carbon–silica. Hybrid shells were characterized using electron microscopy. The effect of hybrid shell type on particle properties such as thermal and moisture absorption was also investigated.

Hybrid hollow silica particles, which show different properties compared to their pristine counterparts, have been synthesized.

Size-Controllable, Single-Step, and Scalable Synthesis of Hollow Polymer Nanoparticles

Hollow polymer nanoparticles are of great importance in various industrial fields such as drug delivery vehicles in pharmaceutics, high thermal insulation materials for heat flow blocking and energy savings, and materials with unique optical properties. While the fabrication methods for hollow polymer nanoparticles have been studied and developed by numerous researchers, most synthesis methods require a rather complicated process, including a thorough core-washing step to formulate pores inside the particles. Single-step synthesis methods were developed to overcome this practical issue by utilizing the sacrificial solvent filling the pores temporarily and having it naturally evaporate without further process; however, such processes could not produce sub-200 nm diameter particles, which limit the application for high surface area applications. Herein, we have developed an innovative synthesis method that can overcome the particle size limitation by utilizing a sacrificial solvent for pore formation and a recondensation inhibitor. Pseudo-state Ostwald ripening was realized by selecting the sacrificial solvent with less affinity to the copolymer of hollow polymer particles, thus inhibiting the particle growth during polymerization. We have successfully obtained 120 nm diameter hollow PS-PMMA copolymer particles in large quantity via the single-step preparation of emulsion polymerization.

Configuration-Controllable Polymeric Nanovehicles Self-Assembled in Pixel Grids under an Electric Field

Polymeric nanovehicles have been widely applied in many fields, but during the process of preparation, it is still hard to reach the balance between precise structure control and mass production. In the present work, using industrial pixel grids as the macroscopic template, we applied dual effects of confinement and dielectric difference to speed up the self-assembly of polymeric nanovehicles, even to regulate the generated mesostructures and cargo loading. Within 2 min, a poly(ethylene glycol)-block-poly(d,l-lactide acid) (PEG-b-PDLLA) amphiphilic block copolymer layer was rapidly pushed off and broken down into uniform nanoparticles at 40 V. Hereinto, increasing volume of the outer aqueous phase in pixel grids favored the architectonic transformation of the generated nanovehicles from solid micelles with a diameter of 95 nm to hollow vesicles with a diameter of 232 nm. In particular, all the elements from the confinement cells to the preparation process can be completed via wet printing. Electric-field-induced pixel template technology is facile, cheap, controllable, and recyclable, and it is anticipated to promote continuous and bulk production of polymeric nanovehicles.

Transformation of hollow ZnFe-ZIF-8 nanocrystals into hollow ZnFe–N/C electrocatalysts for the oxygen reduction reaction

A novel approach for the preparation of a highly active hollow ZnFe–N/C electrocatalyst for the ORR in an alkaline electrolyte was reported.

Room-Temperature Synthesis of Hollow Polymer Microparticles with an Open Hole on the Surface and Their Application

Compared with hollow microparticles with a completely closed shell structure, hollow polymer microparticles with an open hole on their surface have attracted considerable attention because of the obvious importance of the open hole on their surface; however, the development of a facile method to synthesize such unique open-ended hollow particles has remained a great challenge. In this study, an easy-to-use method was developed to rapidly produce monodispersed hollow and pored microparticles in high reaction yield at room temperature. The key to achieving the unusually shaped polystyrene (PS) microparticles was the use of anisotropic PS seeds. When hollow and dimpled PS seeds prepared using a modified dispersion polymerization method were dispersed in a water-toluene mixture followed by solvent evaporation under ambient conditions, they transformed into hollow PS microparticles with an open hole on their surface. A plausible mechanism for the transformation of the PS microparticles during the swelling and drying processes was proposed on the basis of our results and observations. The structural features of the hollow and pored PS microparticles motivated us to use the particles as a catalyst support. By using modified heterophase polymer dispersion processing involving the addition of a Ag precursor, hollow and pored PS microparticles covered with Ag nanocrystals were obtained on the basis of the in situ reduction of metal precursor on the surface of polymer particles. The resulting Ag nanocrystals/PS hybrid microparticles exhibited enhanced catalytic activity at low concentrations of nanocrystals and could be reused several times without loss of activity when used as catalysts for the reduction of 4-nitrophenol to 4-aminophenol with sodium borohydride.

Poly(ε-caprolactone) (PCL) Hollow Nanoparticles with Surface Sealability and On-Demand Pore Generability for Easy Loading and NIR Light-Triggered Release of Drug

A new system for the easy loading and NIR light-triggered release of drugs is introduced. It consists of poly(ε-caprolactone) (PCL) hollow nanoparticles with surface openings containing a biodegradable fatty acid with phase-change ability and a biocompatible photothermal agent. These openings, which can enhance the connectivity between the interior and the exterior, enable the easy loading of drug molecules into the interior voids, and their successive sealing ensures a stable encapsulation of the drug. Upon exposure to an external NIR light irradiation, the photothermal agent generates heat that raises the local temperature of the hollow particles above the melting point of the fatty acid, leading to the formation of nanopores on their shells, and consequently, the instant release of the encapsulated drug molecules through the pores. The synergistic activity of the hyperthermia effect from the photothermal agent and the NIR-triggered release of the drug molecules results in noticeable anticancer efficacy.

Role of Osmotic Pressure for the Formation of Sub-micrometer-Sized, Hollow Polystyrene Particles by Heat Treatment in Aqueous Dispersed Systems †

In a previous article, it was reported that a rather amount of sulfate end-groups as initiator fragment were buried in the inside of polystyrene (PS) particles, which were synthesized by emulsion polymerization with potassium persulfate initiator and nonionic emulsifier and operated to absorb water from the aqueous medium, resulting in hollow particles, when the PS emulsion was treated at higher temperature than the glass transition temperature of PS. In this article, it was clarified that the water absorption is based on the osmotic pressure between the outside (aqueous medium) and inside of the PS particles due to the buried sulfate end-groups.

Preparation and evaluation of a porous molecularly imprinted polymer for selective recognition of the antiepileptic drug carbamazepine

A novel and porous molecularly imprinted polymer (PMIP) was synthesized and used as a solid-phase extraction adsorbent for preconcentration of carbamazepine (CBZ) prior to its quantitation by high-performance liquid chromatography (HPLC) in various sample forms (e.g., drinking water, river water, hospital wastewater, and pharmaceuticals). PMIP-CBZ was applied to a polymerization process in which polystyrene spheres were coated with a silica layer. Removal of polystyrene spheres and formation of porous silica facilitated the recovery of CBZ (99.4%) during the extraction process. Site accessibility to the surface of PMIP-CBZ increased the density of high-recognition sites. PMIP-CBZ was characterized by Fourier-transform infrared spectroscopy and scanning electron microscopy. The key variables influencing the extraction efficiency of PMIP (e.g., adsorbent loading, eluent type, eluent volume, reusability of the adsorbent, and cross-reactivity) were optimized. The optimized protocol was successfully employed to quantify CBZ with limit of detection and limit of quantification as 0.082 and 0.270 ng/mL, respectively (linear detection range: 0.5-250 ng/mL and a relative standard deviation:  < 5%). Use of the PMIP adsorbent resulted in a sensitive and stable method for efficiently quantitation of CBZ from various real sample matrices.

The Horizon of the Emulsion Particulate Strategy: Engineering Hollow Particles for Biomedical Applications

With their hierarchical structures and the substantial surface areas, hollow particles have gained immense research interest in biomedical applications. For scalable fabrications, emulsion-based approaches have emerged as facile and versatile strategies. Here, the recent achievements in this field are unfolded via an "emulsion particulate strategy," which addresses the inherent relationship between the process control and the bioactive structures. As such, the interior architectures are manipulated by harnessing the intermediate state during the emulsion revolution (intrinsic strategy), whereas the external structures are dictated by tailoring the building blocks and solidification procedures of the Pickering emulsion (extrinsic strategy). Through integration of the intrinsic and extrinsic emulsion particulate strategy, multifunctional hollow particles demonstrate marked momentum for label-free multiplex detections, stimuli-responsive therapies, and stem cell therapies.

Degradable, thermo-, pH- and redox-sensitive hydrogel microcapsules for burst and sustained release of drugs

Polymer microcapsules offer a possibility of storing increased amounts of drugs. Appropriate design and composition of the microcapsules allow tuning of the drug-release process. In this paper, we report on synthesis of hydrogel microcapsules sensitive to temperature and pH and degradable by glutathione and hydrogen peroxide. Microcapsules were based on thermo-responsive poly(N-isopropylacrylamide) and degradable cystine crosslinker, and were synthesized by applying precipitation polymerization. Such way of polymerization was appropriately modified to limit the crosslinking in the microcapsule center. This led to a possibility of washing out the pNIPA core at room temperature and the formation of a capsule. Microcapsules revealed rather high drug-loading capacity of ca. 17%. The degradation of the microcapsules by the reducing agent (GSH) and the oxidizing agent (H₂O₂) was confirmed by using the DLS, UV-Vis, SEM and TEM techniques. Depending on pH and concentration of the reducing/oxidizing agents a fast or slow degradation of the microcapsules and a burst or long-term release of doxorubicin (DOX) were observed. The DOX loaded microcapsules appeared to be cytotoxic against A2780 cancer cells similarly to DOX alone, while unloaded microcapsules did not inhibit proliferation of the cells.