Tuning the Activity and Stability of CoCr-LDH by Forming a Heterostructure on Surface-Oxidized Nickel Foam for Enhanced Water-Splitting Performance

The development of low-cost, efficient catalysts for electrocatalytic water splitting to generate green hydrogen is a hot topic among researchers. Herein, we have developed a highly efficient heterostructure of CoCr-LDH on NiO on nickel foam (NF) for the first time. The preparation strategy follows the simple annealing of a cleaned NF without using any Ni salt precursor, followed by the growth of CoCr-LDH nanosheets over the surface-oxidized NF. The CoCr-LDH/NiO/NF catalyst shows excellent electrocatalytic activity and stability toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in a 1 M KOH solution. For OER, only 253 mV and for HER, only 185 mV overpotentials are required to attain a 50 mA cm-2 current density. Also, the long-term stability of both the OER and HER for 60 h proves its robustness. The turnover frequency value for the OER increased 1.85 times after the heterostructure formation compared to bare CoCr-LDH. The calculated Faradaic efficiency values of 97.4 and 94.75% for the OER and HER revealed the high intrinsic activity of the heterostructure. Moreover, the heterostructure only needs 1.57 V of cell voltage when acting as both the anode and the cathode to achieve a 10 mA cm-2 current density. The long-term stability of 60 h for the total water-splitting process proves its excellent performance. Several systematic pre- and post-experiment characterizations prove its durable nature. These excellent OER and HER activities and stabilities are attributed to the surface-modified electronic structure and thin nanosheet-like surface morphology of the heterostructure. The thin, wide, and modified surface of the catalyst facilitates the diffusion of ions (reactants) and gas molecules (products) at the electrode/electrolyte interface. Furthermore, electron transfer from n-type CoCr-LDH to p-type NiO results in enhanced electronic conductivity. This study demonstates the effective design of a self-supported heterostructure with minimal synthetic steps to generate a bifunctional electrocatalyst for water splitting, contributing to the greater cause of green hydrogen economy.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Application of Oxygen-Group-Based Amorphous Nanomaterials in Electrocatalytic Water Splitting

Environmentally friendly energy sources (e.g., hydrogen) require an urgent development targeting to address the problem of energy scarcity. Electrocatalytic water splitting is being explored as a convenient catalytic reaction in this context, and promising amorphous nanomaterials (ANMs) are receiving increasing attention due to their excellent catalytic properties.Oxygen group-based amorphous nanomaterials (O-ANMs) are an important component of the broad family of ANMs due to their unique amorphous structure, large number of defects, and abundant randomly oriented bonds, O-ANMs induce the generation of a larger number of active sites, which favors a better catalytic activity. Meanwhile, amorphous materials can disrupt the inherent features of conventional crystalline materials regarding electron transfer paths, resulting in higher flexibility. O-ANMs mainly include VIA elements such as oxygen, sulfur, selenium, tellurium, and other transition metals, most of which are reported to be free of noble metals and have comparable performance to commercial catalysts Pt/C or IrO2 and RuO2 in electrocatalysis. This review covers the features and reaction mechanism of O-ANMs, the synthesis strategies to prepare O-ANMs, as well as the application of O-ANMs in electrocatalytic water splitting. Last, the challenges and prospective remarks for future development in O-ANMs for electrocatalytic water splitting are concluded.

Skeleton-coated CoCu-Based bimetal hollow nanoprisms as High-Performance electrocatalysts for oxygen evolution reaction

CoSx materials with high catalytic activity are considered as promising HER electrocatalysts, but their inherent low electrical conductivity and easy loss of active sites have greatly limited their applications in OER electrocatalysis. Herein, we present a convenient method to synthesize Co-Cu hollow nanoprisms after wrapping and calcining with trithiocyanuric acid (C3H3N3S3) (denoted N-Co-Cu-S-x HNs). The results showed that Cu doping modified the charge density of Co center, leading to the enhancement of the intrinsic activity of the Co3S4 active center, meanwhile wrapping trithiocyanuric acid on the surfaces and calcinating to form N-containing C skeleton as a flexible substrate to encapsulate the catalysts, which effectively protected the active sites inside the catalysts. Notably, the OER catalyst that was optimized by adjusting the metal ratio and controlling the trithiocyanuric acid incorporation exhibited a low overpotential of 306 mV under a current density of 10 mA cm-2 and showed a superior durability of more than 27 h. This work may provide some insights into the preparation of oxygen evolution reaction catalysts with excellent performance through doping transition metals and protecting the internal active sites strategies.

Template free-synthesis of cobalt-iron chalcogenides [Co0.8Fe0.2L2, L = S, Se] and their robust bifunctional electrocatalysis for the water splitting reaction and Cr(vi) reduction

The ease of production of materials and showing multiple applications are appealing in this modern era of advanced technology. This paper reports the synthesis of a pair of novel cobalt–iron chalcogenides [Co_0.8Fe_0.2S₂ and Co_0.8Fe_0.2Se₂] with enhanced electro catalytic activities. These ternary metal chalcogenides were synthesized by a one-step template-free approach via a hexamethyldisilazane (HMDS)-assisted synthetic method. Transient photocurrent (TPC) studies and electrochemical impedance spectra (EIS) of these materials showed free electron mobility. Their bifunctional activities were verified in both the electrochemical oxygen evolution reaction (OER) and in the electrochemical reduction of toxic inorganic heavy metal ions [Cr(vi)] in polluted water. The materials showed robust catalytic ability in the oxygen evolution reaction with minimum possible over potential (345 and 350 mV @ η10) as determined by linear sweep voltammetry and the lower Tafel values (52.4 and 84.5 mV dec⁻¹) for Co_0.8Fe_0.2Se₂ and Co_0.8Fe_0.2S₂ respectively. Surprisingly, both the materials also showed an excellent activity towards electrochemical Cr(vi) reduction to Cr(iii). Besides the maximum current achieved for Co_0.8Fe_0.2S₂, a minimum value for the Limit of detection (LOD) was obtained for Co_0.8Fe_0.2S₂ (0.159 μg L⁻¹) compared to Co_0.8Fe_0.2Se₂ (0.196 μg L⁻¹). We tested the durability of catalysts, the critical factor for the prolonged use of catalysts, through the recyclability measurements of these materials as catalysts. Both the catalysts presented outstanding durability and balanced electro catalytic activities for up to 1500 CV cycles, and chronoamperometry studies also confirmed exceptional stability. The enhanced catalytic activities of these materials are ascribed to the free electron movement, evidenced by the increased TPC measured and EIS. Therefore, the template-free synthesis of these electro catalysts containing non-noble metal illustrates the practical approach to develop such types of catalysts for multiple functions.

The ease of production of materials and showing multiple applications are appealing in this modern era of advanced technology. Cobalt–iron chalcogenides showing multiple application is reported.

Integrated Bifunctional Electrodes Based on Amorphous Co-Ni-S Nanoflake Arrays with Atomic Dispersity of Active Sites for Overall Water Splitting

Fabrication of amorphous electrocatalysts without noble metals for cost-effective full water splitting is highly desired but remains a substantial challenge. In the present work, we report a facile strategy for exploring integrated bifunctional electrocatalysts based on amorphous cobalt/nickel sulfide nanoflake arrays self-supported on carbon cloth, by tailoring competitive coordination of metal ions between glucose and 2-aminoterephthalic acid. Ultrahigh dispersion of binary metal active sites with balanced atomic distribution enables the optimization of catalytic properties for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) in an alkaline solution. The obtained catalyst exhibits remarkably enhanced OER and HER activities as compared with its oxide counterpart and analogues with different Co/Ni ratios. It requires overpotentials of 296 and 192 mV to deliver a current density of 10 mA cm^-2 for the OER and HER, respectively; it retains 96.6 and 96.9% activity after 32 h of OER and 36 h of HER tests at 10 mA cm^-2, respectively. As directly used an anode and a cathode in an alkaline electrolyzer, a low cell voltage of 1.60 V could endow a water splitting current of 10 mA cm^-2, outperforming the benchmark RuO₂ and Pt/C-based electrolyzer at 1.72 V@10 mA cm^-2. The current synthetic strategy may provide more opportunities for the design and direct synthesis of amorphous catalysts for overall water splitting and beyond.

Cobalt oxysulphide/hydroxide nanosheets with dual properties based on electrochromism and a charge storage mechanism

The charge storage mechanism of mixed cobalt oxysulphide/hydroxide materials having electrochromic properties was investigated. The cobalt oxysulphide/hydroxide materials exhibit a dual reversible redox reaction and electrochromic properties in 1 M KOH during charging and discharging.

The charge storage mechanism of mixed cobalt oxysulphide/hydroxide materials having electrochromic properties was investigated.

Amorphous Catalysts and Electrochemical Water Splitting: An Untold Story of Harmony

In the near future, sustainable energy conversion and storage will largely depend on the electrochemical splitting of water into hydrogen and oxygen. Perceiving this, countless research works focussing on the fundamentals of electrocatalysis of water splitting and on performance improvements are being reported everyday around the globe. Electrocatalysts of high activity, selectivity, and stability are anticipated as they directly determine energy- and cost efficiency of water electrolyzers. Amorphous electrocatalysts with several advantages over crystalline counterparts are found to perform better in electrocatalytic water splitting. There are plenty of studies witnessing performance enhancements in electrocatalysis of water splitting while employing amorphous materials as catalysts. The harmony between the flexibility of amorphous electrocatalysts and electrocatalysis of water splitting (both the oxygen evolution reaction [OER] and the hydrogen evolution reaction [HER]) is one of the untold and unsummarized stories in the field of electrocatalytic water splitting. This Review is devoted to comprehensively discussing the upsurge of amorphous electrocatalysts in electrochemical water splitting. In addition to that, the basics of electrocatalysis of water splitting are also elaborately introduced and the characteristics of a good electrocatalyst for OER and HER are discussed.

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe-Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm^-2 at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec^-1 for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm^-2 due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂ O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.

Nanostructured Fe-Ni Sulfide: A Multifunctional Material for Energy Generation and Storage

Multifunctional materials for energy conversion and storage could act as a key solution for growing energy needs. In this study, we synthesized nanoflower-shaped iron-nickel sulfide (FeNiS) over a nickel foam (NF) substrate using a facile hydrothermal method. The FeNiS electrode showed a high catalytic performance with a low overpotential value of 246 mV for the oxygen evolution reaction (OER) to achieve a current density of 10 mA/cm2, while it required 208 mV at 10 mA/cm2 for the hydrogen evolution reaction (HER). The synthesized electrode exhibited a durable performance of up to 2000 cycles in stability and bending tests. The electrolyzer showed a lower cell potential requirement for a FeNiS-Pt/C system (1.54 V) compared to a standard benchmark IrO2-Pt/C system (1.56 V) to achieve a current density of 10 mA/cm2. Furthermore, the FeNiS electrode demonstrated promising charge storage capabilities with a high areal capacitance of 13.2 F/cm2. Our results suggest that FeNiS could be used for multifunctional energy applications such as energy generation (OER and HER) and storage (supercapacitor).

Monitoring compositional changes in Ni(OH)2 electrocatalysts employed in the oxygen evolution reaction

Relating morphology and compositional changes spatially across a catalyst is important for understanding the active site involved in a reaction which is studied here for the OER at Ni(OH)₂.