Performance evaluation of carbon quantum dots impregnated glass ionomer cement to avoid peri-implant disease

Dental cement residues exacerbate peri-implant tissue irritation and peri-implantitis. The present study aims to evaluate the cytotoxicity, physiochemical, optical, and rheological properties of carbon quantum dots (CQDs) impregnated glass ionomer cement (GIC). Surface passivated fluorescent CQDs were synthesized using citric acid via thermal decomposition and blended with GIC. Characterization studies and rheological measurements were made to evaluate their performance. 3D-printed dental implant models cemented with GIC and GIC-CQD were compared to analyze excess cement residues. MTT assay was performed with human dental pulp stem cells (hDPSCs) and statistically analyzed using ANOVA and Tukey's test. CQDs with a particle dimension of ∼2 nm were synthesized. The amorphous property of GIC-CQD was confirmed through XRD. The fluorescence properties of GIC-CQD showed three times higher emission intensity than conventional GIC. GIC-CQD attained maturation with a setting time extended by 64 s than GIC. Cement residue of size 2 mm was detected with a UV light excitation at a distance between 5 to 10 cm. Biocompatibility at 0.125 mg ml-1dilution concentrations of GIC-CQD showed viability greater than 80% to hDPSCs. For the first time, we report that CQDs-impregnated GIC is a unique and cost-effective strategy for in-situ detection of excess cement rapidly using a hand-held device. A novel in-situ rapid detection method enables the dentist to identify residual cement of size less than 2 mm during the implantation. Therefore, GIC-CQD would replace conventional GIC and help in the prevention of peri-implant diseases.

Fluorescence and Nonlinear Optical Response of Graphene Quantum Dots Produced by Pulsed Laser Irradiation in Toluene

Graphene quantum dots (GQDs), the zero dimensional (0D) single nanostructures, have many exciting technological applications in diversified fields such as sensors, light emitting devices, bio imaging probes, solar cells, etc. They are emerging as a functional tool to modulate light by means of molecular engineering due to its merits, including relatively low extend of loss, large outstretch of spatial confinement and control via doping, size and shape. In this article, we present a one pot, facile and ecofriendly synthesis approach for fabricating GQDs via pulsed laser irradiation of an organic solvent (toluene) without any catalyst. It is a promising synthesis choice to prepare GQDs due to its fast production, lack of byproducts and further purification, as well as the control over the product by accurate tuning of laser parameters. In this work, the second (532 nm) and third harmonic (355 nm) wavelengths of a pulsed nanosecond Nd:YAG laser have been employed for the synthesis. It has been found that the obtained GQDs display fluorescence and is expected to have potential applications in optoelectronics and light-harvesting devices. In addition, nonlinear optical absorption of the prepared GQDs was measured using the open aperture z-scan technique (in the nanosecond regime). These GQDs exhibit excellent optical limiting properties, especially those synthesized at 532 nm wavelength.

Advances and opportunities in nanoimaging agents for the diagnosis of inflammatory lung diseases

The development of rapid, noninvasive diagnostics to detect lung diseases is a great need after the COVID-2019 outbreak. The nanotechnology-based approach has improved imaging and facilitates the early diagnosis of inflammatory lung diseases. The multifunctional properties of nanoprobes enable better spatial-temporal resolution and a high signal-to-noise ratio in imaging. Targeted nanoimaging agents have been used to bind specific tissues in inflammatory lungs for early-stage diagnosis. However, nanobased imaging approaches for inflammatory lung diseases are still in their infancy. This review provides a solution-focused approach to exploring medical imaging technologies and nanoprobes for the detection of inflammatory lung diseases. Prospects for the development of contrast agents for lung disease detection are also discussed.

Graphene Nanostructures by Pulsed Laser Ablation in Liquids: A Review

High-quality graphene has demonstrated remarkable mechanical, thermal, electronic, and optical properties. These features have paved the road for the introduction of graphene into numerous applications such as optoelectronics and energy devices, photodegradation, bioimaging, photodetectors, sensors, and biosensors. Due to this, graphene research has accelerated exponentially, with the aim of reaching a sustainable large-scale production process of high-quality graphene that can produce graphene-based technologies at an industrial scale. There exist numerous routes for graphene fabrication; however, pulsed laser ablation in liquids (PLAL) has emerged as a simple, fast, green, and environmentally friendly method as it does not require the use of toxic chemicals. Moreover, it does not involve the use of expensive vacuum chambers or clean rooms. However, the great advantage of PLAL is its ability to control the size, shape, and structure of the produced nanostructures through the choice of laser parameters and liquid used. Consequently, this review will focus on recent research on the synthesis of graphene nanosheets and graphene quantum dots via PLAL and the effect of experimental parameters such as laser wavelength, pulse width, pulse energy, repetition rate, irradiation time, and liquid media on the produced nanostructures. Moreover, it will discuss extended PLAL techniques which incorporate other methods into PLAL. Finally, different applications that utilize nanostructures produced by PLAL will be highlighted. We hope that this review will provide a useful guide for researchers to further develop the PLAL technique and the fabrication of graphene-based materials.

Graphene quantum dots: synthesis, properties, and applications to the development of optical and electrochemical sensors for chemical sensing

GQDs exhibits exceptional electrochemical activity owing to their active edge sites that make them very attractive for biosensing applications. However, their use in the design of new biosensing devices for application to the detection and quantification of toxins, pathogens, and clinical biomarkers has so far not investigated in detail. In this regard, herein we provide a detailed review on various methodologies employed for the synthesis of GQDs, including bottom-up and top-down approaches, with a special focus on their applications in biosensing via fluorescence, photoluminescence, chemiluminescence, electrochemiluminescence, fluorescence resonance energy transfer, and electrochemical techniques. We believe that this review will shed light on the critical issues and widen the applications of GQDs for the design of biosensors with improved analytical response for future applications. HIGHLIGHTS: • Properties of GQDs play a critical role in biosensing applications. • Synthesis of GQDs using top-down and bottom-up approaches is discussed comprehensively. • Overview of advancements in GQD-based sensors over the last decade. • Methods for the design of selective and sensitive GQD-based sensors. • Challenges and opportunities for future GQD-based sensors.

Preparation of Graphene Quantum Dots by Visible-Fenton Reaction and Ultrasensitive Label-Free Immunosensor for Detecting Lipovitellin of Paralichthys Olivaceus

The increasing levels of environmental estrogens are causing negative effects on water, soil, wildlife, and human beings; label-free immunosensors with high specificities and sensitivities are being developed to test estrogeneous chemicals in complex environmental conditions. For the first time, highly fluorescent graphene quantum dots (GQDs) were prepared using a visible-Fenton catalysis reaction with graphene oxide (GO) as a precursor. Different microscopy and spectroscopy techniques were employed to characterize the physical and chemical properties of the GQDs. Based on the fluorescence resonance energy transfer (FRET) between amino-functionalized GQDs conjugated with anti-lipovitellin monoclonal antibodies (Anti-Lv-mAb) and reduced graphene oxide (rGO), an ultrasensitive fluorescent “ON-OFF” label-free immunosensor for the detection of lipovitellin (Lv), a sensitive biomarker derived from Paralichthys olivaceus for environmental estrogen, has been established. The immunosensor has a wide linear test range (0.001–1500 ng/mL), a lower limit of detection (LOD, 0.9 pg/mL), excellent sensitivity (26,407.8 CPS/(ng/mL)), and high selectivity and reproducibility for Lv quantification. The results demonstrated that the visible-Fenton is a simple, mild, green, efficient, and general approach to fabricating GQDs, and the fluorescent “ON-OFF” immunosensor is an easy-to-use, time-saving, ultrasensitive, and accurate detection method for weak estrogenic activity.

Graphene Quantum Dots by Eco-Friendly Green Synthesis for Electrochemical Sensing: Recent Advances and Future Perspectives

The continuous decrease in the availability of fossil resources, along with an evident energy crisis, and the growing environmental impact due to their use, has pushed scientific research towards the development of innovative strategies and green routes for the use of renewable resources, not only in the field of energy production but also for the production of novel advanced materials and platform molecules for the modern chemical industry. A new class of promising carbon nanomaterials, especially graphene quantum dots (GQDs), due to their exceptional chemical-physical features, have been studied in many applications, such as biosensors, solar cells, electrochemical devices, optical sensors, and rechargeable batteries. Therefore, this review focuses on recent results in GQDs synthesis by green, easy, and low-cost synthetic processes from eco-friendly raw materials and biomass-waste. Significant advances in recent years on promising recent applications in the field of electrochemical sensors, have also been discussed. Finally, challenges and future perspectives with possible research directions in the topic are briefly summarized.

Carbon-based nanomaterials for targeted cancer nanotherapy: recent trends and future prospects

Carbon-based nanomaterials are becoming attractive materials due to their unique structural dimensions and promising mechanical, electrical, thermal, optical and chemical characteristics. Carbon nanotubes, graphene, graphene oxide, carbon and graphene quantum dots have numerous applications in diverse areas, including biosensing, drug/gene delivery, tissue engineering, imaging, regenerative medicine, diagnosis, and cancer therapy. Cancer remains one of the major health problems all over the world, and several therapeutic approaches are focussed on designing targeted anticancer drug delivery nanosystems by applying benign and less hazardous resources with high biocompatibility, ease of functionalization, remarkable targeted therapy issues, and low adverse effects. This review highlights the recent development on these carbon based-nanomaterials in the field of targeted cancer therapy and discusses their possible and promising diagnostic and therapeutic applications for the treatment of cancers.

Recent advances in nanomaterials based biosensors for point of care (PoC) diagnosis of Covid-19 - A minireview

Early diagnosis and ultrahigh sample throughput screening are the need of the hour to control the geological spread of the COVID-19 pandemic. Traditional laboratory tests such as enzyme-linked immunosorbent assay (ELISA), reverse transcription polymerase chain reaction (RT-PCR) and computed tomography are implemented for the detection of COVID-19. However, they are limited by the laborious sample collection and processing procedures, longer wait time for test results and skilled technicians to operate sophisticated facilities. In this context, the point of care (PoC) diagnostic platform has proven to be the prospective approach in addressing the abovementioned challenges. This review emphasizes the mechanism of viral infection spread detailing the host-virus interaction, pathophysiology, and the recent advances in the development of affordable PoC diagnostic platforms for rapid and accurate diagnosis of COVID-19. First, the well-established optical and electrochemical biosensors are discussed. Subsequently, the recent advances in the development of PoC biosensors, including lateral flow immunoassays and other emerging techniques, are highlighted. Finally, a focus on integrating nanotechnology with wearables and smartphones to develop smart nanobiosensors is outlined, which could promote COVID-19 diagnosis accessible to both individuals and the mass population at patient care.

Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid. Here, established laser-based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles which include pure oxidic phases, as well as unconventional structures like defective or doped oxides, non-equilibrium compounds, metal-oxide core-shells and other anisotropic morphologies. So far, these materials showed several useful properties that are discussed with special emphasis on catalytic, biomedical and optical application. Yet, given the endless number of mixed compounds accessible by the laser-assisted methodologies, there is still a lot of room to expand the library of nano-crystals and to refine the control over products as well as to improve the understanding of the whole process of nanoparticle formation. To that end, this review aims to identify the perspectives and unique opportunities of laser-based synthesis and processing of colloids for future studies of oxide nanomaterial-oriented sciences.

Electrochemistry and Electrocatalysis of Hemoglobin Based on Graphene Quantum Dots Modified Electrode

Background:

Graphene quantum dots (GQD) is a new member of carbon nanomaterial that has attracted increasing attention owing to its better chemical inertness, low cytotoxicity, large specific surface area, cheap cost, suitable conductivity and excellent biocompatibility.

Methods:

Electrochemical behaviors of this modified electrode were studied by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical investigations of Nafion/Hb/GQD/ CILE were carried out with electrochemical parameters calculated.

Results:

In the phosphate buffer solution with a pH value of 5.0, good linear relationships between the catalytic reduction current and the concentration of substrate were got for TCA (6.0~100.0 mmol·L-1), NaNO2 (2.0~12.0 mmol·L-1) and H2O2 (6.0~30.0 mmol·L-1). The proposed method was applied to NaNO2 concentration detection in soak water from picked vegetables with satisfactory results.

Conclusion:

This Nafion/Hb/GQD/CILE had a good bioelectrocatalytic activity to different substrates such as trichloroacetic acid, NaNO2 and H2O2 reduction with the advantages including wide detection range, low detection limit and good stability. Therefore, the application of GQD in electrochemical sensor was extended in this paper.

High-quality quantum dots for multiplexed bioimaging: A critical review

Bioimaging done using two or more fluorophores possessing different emission wavelengths can be termed as a multicolor/multiplexed bioimaging technique. Traditionally, images are captured sequentially using multiple fluorophores having specific excitation and emission. For this purpose, multifunctional nanoprobes, such as organic fluorophores, metallic nanoparticles, semiconductor quantum dots, and carbon dots (CDs) are used. Among these fluorophores, quantum dots (QDs) have emerged as an ideal probe for multiplexed bioimaging due to their unique property of size tunable emission. However, the usage of quantum dots in bioimaging is limited due to their toxicity. Furthermore, the reproducibility of optical properties is cynical. These desirable properties, along with enhancement in quantum efficiency, photostability, fluorescence lifetime, etc. can be achieved by stringent control over synthesis parameters. This review summarizes the desirable properties and synthesis methods of such superior QDs followed by their application in multiplexed imaging.

Graphene Quantum Dots for Optical Bioimaging

Graphene quantum dots (GQDs) have shown great potential in bioimaging applications due to their excellent biocompatibility, low cytotoxicity, feasibility for surface functionalization, physiological stability, and tunable fluorescence properties. This Review first introduces the intriguing optical properties of GQDs that are suitable for biological imaging, and is followed by the GQDs' synthetic strategies. The emergent and latest development methods for tuning GQDs' optical properties are further described in detail. The recent advanced applications of GQDs in vitro, particularly in cell imaging, targeted imaging, and theranostic nanoplatform fabrication, are included. The applications of GQDs for in vivo bioimaging are also covered. Finally, the Review is concluded with the challenges and prospectives that face this nascent yet exciting field.

Liquid-phase laser ablation synthesis of graphene quantum dots from carbon nano-onions: Comparison with chemical oxidation

Graphene quantum dots (GQDs) have been synthesized reproducibly by chemical oxidation (CO) of carbon nano-onions (nCNOs) and a one-step pulsed laser ablation (LA) of nCNOs in deionized water. The photoluminescence (PL) spectra show that the LA-GQDs have blue shifted emission relative to the CO-GQDs which is attributed to the effects of both particle sizes and surface functional groups. The CO-GQDs have an average diameter of 4.1(8) nm and a thickness corresponding to two or three graphene layers, while the LA-GQDs have an average diameter of 1.8(6) nm and a thickness comparable to a single layer of graphene. The CO-GQDs favor the presence of carboxylic groups and have a higher fraction of sp² carbons, while the LA-GQDs prefer the presence of hydroxyl groups and have a higher fraction of sp³ carbons. PL lifetime data suggests that surface functional groups are the main source of radiative deactivation and the sp² carbon domains are mainly responsible for non-radiative decay. PL lifetimes are measured to be 7.9(6) ns for the emission from the carboxylic groups and 3.18(10) ns from the hydroxyl groups. Compared to CO, liquid-phase LA is a faster and cleaner one-step method for producing GQDs with fewer starting chemicals and byproducts.